RESUMO
This study represents the first investigation of bio-succinic acid (bio-SA) production with methane enrichment using carbon-dioxide-fixating bacteria in the co-culture of ragi tapai and macroalgae, Chaetomorpha. Microwave irradiation has also been introduced to enhance the biochemical processes as it could provide rapid and selective heating of substrates. In this research, microwave irradiation was applied on ragi tapai as a pre-treatment process. Factors such as microwave irradiation dose on ragi tapai, Chaetomorpha ratio in the co-culture, and pH value were studied. Optimal conditions were identified using Design-Expert software, resulting in optimal experimental biomethane and bio-SA production of 85.7 % and 0.65 g/L, respectively, at a microwave dose of 1.45 W/g, Chaetomorpha ratio of 0.9 and pH value of 7.8. The study provides valuable insights into microwave control for promoting simultaneous methane enrichment and bio-SA production, potentially reducing costs associated with CO2 capture and storage and biogas upgrading.
Assuntos
Biocombustíveis , Metano , Micro-Ondas , Ácido Succínico , Ácido Succínico/metabolismo , Metano/metabolismo , Concentração de Íons de Hidrogênio , Dióxido de Carbono/metabolismo , Técnicas de CoculturaRESUMO
Overgrowth of microalgae will result in harmful algae blooms that can affect the aquatic ecosystem and human health. Therefore, the quantitation of chlorophyll pigments can be used as an indicator of algae bloom. However, it is difficult to monitor the geographical and temporal distribution of chlorophyll in the aquatic environment. Accordingly, an innovative and inexpensive method based on the red-green-blue (RGB) image analysis was utilized in this study to estimate the microalgae chlorophyll content. The digital images were acquired using a smartphone camera. The colour index was then evaluated using software and associated with chlorophyll concentration significantly. A regression model, using RGB colour components as independent variables to estimate chlorophyll concentration, was developed and validated. The Green in the RGB index was the most promising way to estimate chlorophyll concentration in microalgae. The result showed that acetone was the best extractant solvent with a high R-squared value among the four extractant solvents. Next, the isolation of useful biomolecules, such as proteins, fatty acids, polysaccharides and antioxidants from the microalgae, has been recognized as an alternative to regulating algae bloom. Microalgae are shown to produce bioactive compounds with a variety of biological activities that can be applied in various industries. This study evaluates the biochemical composition of mixed microalgae species, Desmodesmus sp. and Scenedesmus sp. using the liquid triphasic partitioning (TPP) system. The findings from analytical assays revealed that the biomass consisted of varied concentrations of carbohydrates, protein, and lipids. Phenolic compounds and antioxidant activity were at 60.22 mg/L and 90.69%, respectively.
RESUMO
In this study, reactive green 19 dye from wastewater was immobilized on the functionalized chitosan nanofiber membranes to treat soluble microbial proteins in biological wastewater. Polyacrylonitrile nanofiber membrane (PAN) was prepared by the electrospinning technique. After heat treatment, alkaline hydrolysis, and chemically grafted with chitosan to obtain modified chitosan nanofibers (P-COOH-CS), and finally immobilized with RG19 dye, dyed nanofibers were generated (P-COOH-CS-RG19). The synthesis of P-COOH-CS and P-COOH-CS-RG19 are novel materials for protein adsorption that are not deeply investigated currently, with each of the material functions based on their properties in significantly improving the adsorption efficiency. The nanofiber membrane shows good adsorption capacity and great recycling performance, while the application of chitosan and dye acts as the crosslinker in the nanofiber membrane and consists of various functional groups to enhance the adsorption of protein. The dyed nanofibers were applied for the batch adsorption of soluble protein (i.e., lysozyme), and the process parameters including chitosan's molecular weight, coupling pH, chitosan concentration, dye pH, dye concentration, and lysozyme pH were studied. The results showed that the molecular weight of chitosan was 50 kDa, pH 5, concentration 0.5%, initial concentration of dye at 1 mg/mL dye and pH 12, lysozyme solution at 2 mg/mL at pH 8, and the maximum adsorption capacity was 1293.66 mg/g at a temperature of 318 K. Furthermore, thermodynamic, and kinetic studies suggested that the adsorption behavior of lysozyme followed the Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. The optimal adsorption and desorption conditions based on batch experiments were directly applied to remove lysozyme in a continuous operation. This study demonstrated the potential of dyed nanofibers as an efficient adsorbent to remove approximately 100% of lysozyme from the simulated biological wastewater.
RESUMO
The Industrial Revolution 4.0 (IR 4.0) holds the opportunity to improve the efficiency of managing solid waste through digital and machinery applications, effectively eliminating, recovering, and repurposing waste. This research aims to discover and review the potential of current technologies encompassing innovative Industry 4.0 designs for solid waste management. Machinery and processes emphasizing on circular economy were summarized and evaluated. The application of IR 4.0 technologies shows promising opportunities in improving the management and efficiency in view of solid waste. Machine learning (ML), artificial intelligence (AI), and image recognition can be used to automate the segregation of waste, reducing the risk of exposing labour workers to harmful waste. Radio Frequency Identification (RFID) and wireless communications enable the traceability in materials to better understand the opportunities in circular economy. Additionally, the interconnectivity of systems and automatic transfer of data enable the creation of more complex system that houses a larger solution space that was previously not possible such as centralised cloud computing to reduce the cost by eliminating the need for individual computing systems. Through this comprehensive review-based work, innovative Industry 4.0 components of machinery and processes involving waste management which focuses on circular economy are identified with the critical ones evaluated briefly. It was found that the current research and work done is based on applying Industry 4.0 technologies on individual waste management systems, which lacks the coherency needed to capitalise on technologies such as cloud computing, interconnectivity, big data, etc on a larger scale. Therefore, a real world comprehensive end-to-end integration aimed to optimize every process within the solid waste management chain should be explored.
Assuntos
Resíduos Sólidos , Gerenciamento de Resíduos , Inteligência Artificial , Humanos , Indústrias , Aprendizado de Máquina , Resíduos Sólidos/análiseRESUMO
Electropermeabilization-assisted liquid biphasic flotation (LBF) system is an emerging extraction system facilitated by the adsorptive bubble separation and the electroporation in an aqueous two-phase medium. This integrative extraction system is well suited for the direct recovery of intracellular biocompounds from cells without the needs of discrete steps of mid- or down-stream bioprocessing. The potential of electropermeabilization-assisted LBF system in bioseparation was demonstrated in this study by using the diatom Chaetoceros calcitrans (C. calcitrans) as the source of fucoxanthin, which is a promising antioxidant highly demanded by food and pharmaceutical industries. The extraction performances of LBF and electropermeabilization-assisted LBF system were comprehensively evaluated under the optimal operating conditions. Comparatively, the optimized LBF and electropermeabilization-assisted LBF systems achieved the satisfactory yields of fucoxanthin, i.e., 14.78 mg/g and 16.09 mg/g, respectively. The good recovery of fucoxanthin using electropermeabilization-assisted LBF system could be attributed to the higher release of fucoxanthin from the electrotreated C. calcitrans, allowing a higher partition of fucoxanthin to the top phase of LBF system (236.72 as compared to 152.15 from LBF system). In addition, the fucoxanthin extracted suing both methods exhibit satisfactory antioxidant activities. The application of electropermeabilization-assisted LBF system in the extraction of fucoxanthin is a greener and highly efficient bioprocessing route which can be prospectively extended to other biocompound extraction from microalgal sources.
Assuntos
Diatomáceas , Microalgas , Eletroporação , XantofilasRESUMO
The ever-growing human population has resulted in the expansion of agricultural activity; evident by the deforestation of rainfoamrests as a means of acquiring fertile land for crops. The crops and fruits produced by such means should be utilized completely; however, there are still losses and under-exploitation of these produces which has resulted in wastes being mounted in landfills. These underutilized agricultural wastes including vegetables and fruits can serve as a potential source for biofuels and green diesel. This paper discusses the main routes (e.g., biological and thermochemical) for producing biofuels such as bioethanol, biodiesel, biogas, bio-oil and green diesel from underutilized crops by emphasizing recent technological innovations for improving biofuels and green diesel yields. The future prospects of a successful production of biofuels and green diesel by this source are also explained. Underutilized lignocelluloses including fruits and vegetables serve as a prospective biofuel and green diesel generation source for the future prosperity of the biofuel industry.
Assuntos
Biocombustíveis , Lignina , Agricultura , Humanos , Estudos ProspectivosRESUMO
Usage of plastics in the form of personal protective equipment, medical devices, and common packages has increased alarmingly during these pandemic times. Though they have served as an excellent protection source in minimizing the coronavirus disease (COVID-19) spreading, they have still emerged as major environmental pollutants nowadays. These non-degradable COVID-19 plastic wastes (CPW) were treated through incineration and landfilling process, which may lead to either the release of harmful gases or contaminating the surrounding environment. Further, they can cause numerous health hazards to the human and animal populations. These plastic wastes can be efficiently managed through thermochemical processes like pyrolysis or gasification, which assist in degrading the plastic waste and also effectively convert them into useful energy-yielding products. The pyrolysis process promotes the formation of liquid fuels and chemicals, whereas gasification leads to syngas and hydrogen fuel production. These energy-yielding products can help to compensate for the fossil fuels depletion in the near future. There are many insights explained in terms of the types of reactors and influential factors that can be adopted for the pyrolysis and gasification process, to produce high efficient energy products from the wastes. In addition, advanced technologies including co-gasification and two-stage gasification were also reviewed.
RESUMO
Depletion of non-renewable feedstock and severe wastewater pollution due to human activities have created negative impact to living organisms. The potential solution is to implement wastewater treatment and bioelectricity production through algae-based microbial fuel cell. The algae biomass produced from microbial fuel cell could be further processed to generate biofuels through their unique compositions. The consumption of nutrients in wastewater through algae cultivation and biomass produced to be utilized for energy supply have showed the potential of algae to solve the issues faced nowadays. This review introduces the background of algae and mitigation of wastewater using algae as well as the bioenergy status in Malaysia. The mechanisms of nutrient assimilation such as nitrogen, phosphorus, carbon, and heavy metals are included, followed by the application of algae in microbial fuel cell's chambers. Lastly, the status of algae for bioenergy production are covered.
Assuntos
Microalgas , Biocombustíveis , Biomassa , Humanos , Fósforo , Águas ResiduáriasRESUMO
Global issues such as environmental problems and food security are currently of concern to all of us. Circular bioeconomy is a promising approach towards resolving these global issues. The production of bioenergy and biomaterials can sustain the energy-environment nexus as well as substitute the devoid of petroleum as the production feedstock, thereby contributing to a cleaner and low carbon environment. In addition, assimilation of waste into bioprocesses for the production of useful products and metabolites lead towards a sustainable circular bioeconomy. This review aims to highlight the waste biorefinery as a sustainable bio-based circular economy, and, therefore, promoting a greener environment. Several case studies on the bioprocesses utilising waste for biopolymers and bio-lipids production as well as bioprocesses incorporated with wastewater treatment are well discussed. The strategy of waste biorefinery integrated with circular bioeconomy in the perspectives of unravelling the global issues can help to tackle carbon management and greenhouse gas emissions. A waste biorefinery-circular bioeconomy strategy represents a low carbon economy by reducing greenhouse gases footprint, and holds great prospects for a sustainable and greener world.
RESUMO
The remarkable journey of progression of mankind has created various impacts in the form of polluted environment, amassed heavy metals and depleting resources. This alarming situation demands sustainable energy resources and approaches to deal with these environmental hazards and power deficit. Pyrolysis and co-pyrolysis address both energy and environmental issues caused by civilization and industrialization. The processes use hazardous waste materials including waste tires, plastic and medical waste, and biomass waste such as livestock waste and agricultural waste as feedstock to produce gas, char and pyrolysis oil for energy production. Usage of hazardous materials as pyrolysis and co-pyrolysis feedstock reduces disposal of harmful substances into environment, reducing occurrence of soil and water pollution, and substituting the non-renewable feedstock, fossil fuels. As compared to combustion, pyrolysis and co-pyrolysis have less emission of air pollutants and act as alternative options to landfill disposal and incineration for hazardous materials and biomass waste. Hence, stabilizing heavy metals and solving the energy and waste management problems. This review discusses the pyrolysis and co-pyrolysis of biomass and harmful wastes to strive towards circular economy and eco-friendly, cleaner energy with minimum waste disposal, reducing negative impact on the planet and creating future possibilities.
Assuntos
Pirólise , Eliminação de Resíduos , Biomassa , Substâncias Perigosas , IncineraçãoRESUMO
With the rapid urbanisation happening around the world followed by the massive demand for clean energy resources, green cities play a pivotal role in building a sustainable future for the people. The continuing depletion of natural resources has led to the development of renewable energy with algae as the promising source. The high growth rate of microalgae and their strong bio-fixation ability to convert CO2 into O2 have been gaining attention globally and intensive research has been conducted regarding the microalgae benefits. The focus on potential of microalgae in contributing to the development of green cities is rising. The advantage of microalgae is their ability to gather energy from sunlight and carbon dioxide, followed by transforming the nutrients into biomass and oxygen. This leads to the creation of green cities through algae cultivation as waste and renewable materials can be put to good use. The challenges that arise when using algae and the future prospect in terms of SDGs and economy will also be covered in this review. The future of green cities can be enhanced with the adaptation of algae as the source of renewable plants to create a better outlook of an algae green city.
Assuntos
Biocombustíveis , Microalgas , Biomassa , Dióxido de Carbono , Cidades , HumanosRESUMO
l-Asparaginases have the potential to inhibit the formation of acrylamide, a harmful toxin formed during high temperature processing of food. A novel bacterium which produces l-asparaginase was screened. Type I l-asparaginase gene from Acinetobacter soli was cloned and expressed in Escherichia coli. The recombinant l-asparaginase had an activity of 42.0 IU mL-1 and showed no activity toward l-glutamine and d-asparagine. The recombinant l-asparaginase exhibited maximum catalytic activity at pH 8.0 and 40°C. The enzyme was stable in the pH ranging from 6.0 to 9.0. The activity of the recombinant enzyme was substantially enhanced by Ba2+, dithiothreitol, and ß-mercaptoethanol. The Km and Vmax values of the l-asparaginase for the l-asparagine were 3.22 mmol L-1 and 1.55 IU µg-1, respectively. Moreover, the recombinant l-asparaginase had the ability to mitigate acrylamide formation in potato chips. Compared with the untreated group, the content of acrylamide in samples treated with the enzyme was effectively decreased by 55.9%. These results indicate that the novel type I l-asparaginase has the potential for application in the food processing industry.
Assuntos
Acinetobacter/enzimologia , Acrilamida/metabolismo , Asparaginase/metabolismo , Solanum tuberosum/metabolismo , Acinetobacter/genética , Asparaginase/genética , Asparagina/metabolismo , Estabilidade Enzimática , Escherichia coli/genética , Escherichia coli/metabolismo , Glutamina/metabolismo , LanchesRESUMO
Green microalgae containing various bioactive compounds and macronutrients such as lipids, carbohydrates, and proteins, have attracted much attention from the global community. Microalgae has the potential to be applied in food industries due to its high protein content, rapid growth rate, and ability to survive in harsh conditions. This study presents a simple yet efficient technique of sonication-assisted triphasic partitioning process, also known as ultrasonic-assisted three phase partitioning (UATPP), for the extraction of proteins from Chlorella vulgaris FSP-E. Comparison studies between three phase partitioning (TPP) and UATPP was conducted to investigate the feasibility of the enhanced technique on proteins extraction. Types of salt, ratio of slurry to t-butanol, salt saturation, sonication frequency, power, irradiation time, and duty cycle as well as biomass loading were studied. UATPP was found to be an improved technique compared to TPP. An optimum separation efficiency and yield of 74.59 ± 0.45 and 56.57 ± 3.70% was obtained, respectively, with the optimized conditions: salt saturation (50%), slurry to t-butanol ratio (1:2), sonication power (100%), irradiation time (10 min), frequency (35 kHz), duty cycle (80%) and biomass loading (0.75 wt%). A scaled-up study was performed to validate the reliability of UATPP for protein extraction. The outcome of the study revealed that UATPP is an attractive approach for downstream processing of microalgae.
RESUMO
Microalgae are rich in valuable biomolecules and grow on non-arable land with rapid growth rate, which has a host of new possibility as alternative protein sources. In the present study, extraction of proteins from Chlorella vulgaris via an efficient technique, Liquid Triphasic Flotation (LTF) system, was studied. The optimized conditions in LTF system were 70% v/v of t-butanol, 40% w/v of salt solution, 0.5% w/v of biomass, pH 5.54, 1:1 of salt to t-butanol solution, and 10â¯min of air flotation time to attain 87.23% of protein recovery and 56.72% of separation efficiency. Besides, the study on recycling t-butanol has demonstrated that only one run was sufficient to maintain the performance of system. The efficiency of LTF in extracting protein has performed better than just Three Phase Partitioning (TPP) system. LTF system is hence an effective protein extraction and purification method with minimum operation unit and processing time.
Assuntos
Chlorella vulgaris , Microalgas , Biomassa , Extratos Vegetais , ReciclagemRESUMO
Biomolecules produced by living organisms can perform vast array of functions and play an important role in the cell. Important biomolecules such as lysozyme, bovine serum albumin (BSA), and bromelain are often studied by researchers due to their beneficial properties. The application of reverse micelles is an effective tool for protein separation from their sources due to the special system structure. Mechanisms of transferring biomolecules and factors that influence the extraction of biomolecules are reviewed in this paper. The enhancement of biomolecule extraction could be achieved depending on the properties of reverse micelles. This paper provides an overall review on lysozyme, BSA, and bromelain extraction by reverse micelle for various applications.
Assuntos
Bromelaínas/isolamento & purificação , Muramidase/isolamento & purificação , Soroalbumina Bovina/isolamento & purificação , Animais , Bovinos , Fracionamento Químico , Concentração de Íons de Hidrogênio , Micelas , Tensoativos/químicaRESUMO
In this present study, microalgal phycobiliproteins were isolated and purified via potential biphasic processing technique for pharmaceutical as well as food applications. The algal pre-treatment techniques were studied to enhance the yield of microalgal phycobiliproteins from the biomass. The proposed methods were optimised to obtain the best recovery yield of phycobiliproteins that can be isolated from the biomass. The phycobiliproteins were further purified using liquid biphasic system. The results showed that microalgal phycobiliproteins of high purity and yield was achieved using sonication treatment (20% power, 50% duty cycle and 7â¯min of irradiation time) with the biphasic system, where the purification fold of 6.17 and recovery yield of 94.89% was achieved. This work will provide insights towards the effective downstream processing of biomolecules from microalgae.
Assuntos
Microalgas , Preparações Farmacêuticas , Spirulina , Biomassa , FicobiliproteínasRESUMO
Liquid biphasic flotation (LBF), an integrated process of liquid biphasic system (LBS) and adsorptive bubbles flotation, was used for the purification of C-phycocyanin from S. platensis microalgae. Various experimental parameters such as type of phase forming polymer and salt, concentration of phase forming components, system pH, volume ratio, air flotation time and crude extract concentration were evaluated to maximise the C-phycocyanin recovery yield and purity. The optimal conditions for the LBF system achieving C-phycocyanin purification fold of 3.49 compared to 2.43 from the initial LBF conditions was in polyethylene glycol (PEG) 4000 and potassium phosphate combination, with 250â¯g/L of polymer and salt concentration each, volume ratio of 1:0.85, system pH of 7.0, air flotation duration of 7â¯min and phycocyanin crude extract concentration of 0.625â¯%w/w. The LBF has effectively enhanced the purification of C-phycocyanin in a cost effective and simple processing.
Assuntos
Microalgas , Spirulina , Adsorção , FicocianinaRESUMO
Nowadays, the pretreatment of wastewater prior to discharge is very important in various industries as the wastewater without any treatment contains high organic pollution loads that would pollute the receiving waterbody and potentially cause eutrophication and oxygen depletion to aquatic life. The reuse of seafood wastewater discharge in microalgae cultivation offers beneficial purposes such as reduced processing cost for wastewater treatment, replenishing ground water basin as well as financial savings for microalgae cultivation. In this paper, the cultivation of Chlorella vulgaris with an initial concentration of 0.01 ± 0.001 gâ L-1 using seafood sewage discharge under sunlight and fluorescent illumination was investigated in laboratory-scale without adjusting mineral nutrients and pH. The ability of nutrient removal under different lighting conditions, the metabolism of C. vulgaris and new medium as well as the occurrence of auto-flocculation of microalgae biomass were evaluated for 14 days. The results showed that different illumination sources did not influence the microalgae growth, chemical oxygen demand (COD) and biochemical oxygen demand (BOD) significantly. However, the total nitrogen (total-N) and total phosphorus (total-P) contents of microalgae were sensitive to the illumination mode. The amount of COD, BOD, total-N and total-P were decreased by 88%, 81%, 95%, and 83% under sunlight mode and 81%, 74%, 79%, and 72% under fluorescent illumination, respectively. Furthermore, microalgae were auto-flocculated at the final days of cultivation with maximum biomass concentration of 0.49 ± 0.01 gâ L-1, and the pH value had increased to pH 9.8 ± 0.1 under sunlight illumination.
Assuntos
Chlorella vulgaris , Nutrientes/isolamento & purificação , Alimentos Marinhos , Águas Residuárias/microbiologia , Purificação da Água/métodos , Análise da Demanda Biológica de Oxigênio , Biomassa , Técnicas de Cultura de Células/métodos , Chlorella vulgaris/citologia , Chlorella vulgaris/crescimento & desenvolvimento , Floculação/efeitos dos fármacos , Química Verde , Microalgas/citologia , Nitrogênio/química , Fósforo/química , Esgotos/microbiologiaRESUMO
The present study investigates the prospective of substituting inorganic medium with organic food waste compost medium as a nutrient supplement for the cultivation of Chlorella vulgaris FSP-E. Various percentages of compost mixtures were replaced in the inorganic medium to compare the algal growth and biochemical composition. The use of 25% compost mixture combination was found to yield higher biomass concentration (11.1%) and better lipid (10.1%) and protein (2.0%) content compared with microalgae cultivation in fully inorganic medium. These results exhibited the potential of combining the inorganic medium with organic food waste compost medium as an effective way to reduce the cultivation cost of microalgae and to increase the biochemical content in the cultivated microalgae.
Assuntos
Chlorella vulgaris , Compostagem , Biomassa , Chlorella , Lipídeos , Microalgas , Estudos Prospectivos , Águas ResiduáriasRESUMO
In this present study, alcohol/salt liquid biphasic system was used to extract phlorotannin from brown macroalgae. Liquid biphasic system is a new green technology that integrated with various processes into one-step, by concentrating, separating and purifying the bioproduct in a unit operation. The solvent used is non-toxic and there is potential for solvent recovery which is beneficial to the environment. Phlorotannin is a bioactive compound that has gained much attention due to its health beneficial effect. Therefore, the isolation of phlorotannin is lucrative as it contains various biological activities that are capable to be utilised into food and pharmaceutical application. By using 2-propanol/ammonium sulphate system, the highest recovery of phlorotannin was 76.1% and 91.67% with purification factor of 2.49 and 1.59 from Padina australis and Sargassum binderi, respectively. A recycling study was performed and the salt phase of system was recycled where maximum salt recovery of 41.04% and 72.39% could be obtained from systems containing P. australis and S. binderi, respectively. Similar recovery of phlorotannin was observed after performing two cycles of the system, this concludes that the system has good recyclability and eco-friendly.