RESUMO
Polyamorphic transition (PT) is a compelling and pivotal physical phenomenon in the field of glass and materials science. Understanding this transition is of scientific and technological significance, as it offers an important pathway for effectively tuning the structure and property of glasses. In contrast to the PT observed in conventional metallic glasses (MGs), which typically exhibit a pronounced first-order nature, herein we report a continuous PT (CPT) without first-order characteristics in high-entropy MGs (HEMGs) upon heating. This CPT behavior is featured by the continuous structural evolution at the atomic level and an increasing chemical concentration gradient with temperature, but no abrupt reduction in volume and energy. The continuous transformation is associated with the absence of local favorable structures and chemical heterogeneity caused by the high configurational entropy, which limits the distance and frequency of atomic diffusion. As a result of the CPT, numerous glass states can be generated, which provides an opportunity to understand the nature, atomic packing, formability, and properties of MGs. Moreover, this discovery highlights the implication of configurational entropy in exploring polyamorphic glasses with an identical composition but highly tunable structures and properties.
RESUMO
Regulating the local configuration of atomically dispersed transition-metal atom catalysts is the key to oxygen electrocatalysis performance enhancement. Unlike the previously reported single-atom or dual-atom configurations, we designed a new type of binary-atom catalyst, through engineering Fe-N4 electronic structure with adjacent Co-N2C2 and nitrogen-coordinated Co nanoclusters, as oxygen electrocatalysts. The resultant optimized electronic structure of the Fe-N4 active center favors the binding capability of intermediates and enhances oxygen reduction reaction (ORR) activity in both alkaline and acid conditions. In addition, anchoring M-N-C atomic sites on highly graphitized carbon supports guarantees of efficient charge- and mass-transports, and escorts the high bifunctional catalytic activity of the entire catalyst. Further, through the combination of electrochemical studies and in-situ X-ray absorption spectroscopy analyses, the ORR degradation mechanisms under highly oxidative conditions during oxygen evolution reaction processes were revealed. This work developed a new binary-atom catalyst and systematically investigates the effect of highly oxidative environments on ORR electrochemical behavior. It demonstrates the strategy for facilitating oxygen electrocatalytic activity and stability of the atomically dispersed M-N-C catalysts.
RESUMO
A highly active interface is extremely critical for the catalytic efficiency of an electrocatalyst; however, facilely tailoring its atomic packing characteristics remains challenging. Herein, a simple yet effective strategy is reported to obtain copious high-energy atomic steps at the interface via controlling the solidification behavior of glass-forming metallic liquids. By adjusting the chemical composition and cooling rate, highly faceted FeNi3 nanocrystals are in situ formed in an FeNiB metallic glass (MG) matrix, leading to the creation of order/disorder interfaces. Benefiting from the catalytically active and stable atomic steps at the jagged interfaces, the resultant free-standing FeNi3 nanocrystal/MG composite exhibits a low oxygen-evolving overpotential of 214 mV at 10 mA cm-2 , a small Tafel slope of 32.4 mV dec-1 , and good stability in alkaline media, outperforming most state-of-the-art catalysts. This approach is based on the manipulation of nucleation and crystal growth of the solid-solution nanophases (e.g., FeNi3 ) in glass-forming liquids, so that the highly stepped interface architecture can be obtained due to the kinetic frustration effect in MGs upon undercooling. It is envisaged that the atomic-level stepped interface engineering via the physical metallurgy method can be easily extended to other MG systems, providing a new and generic paradigm for designing efficient yet cost-effective electrocatalysts.
RESUMO
High-content atomically distributed W(V,VI) coordinated with O atoms as WO2 moieties anchored on FeCo layered double hydroxide (FeCo LDH) nanosheets in the structure of SAC W-FeCo LDH is obtained by a facile coprecipitation method, and it presented clearly enhanced stable OER electrocatalytic activity.
RESUMO
The development of cost-effective, high-performance and flexible electrocatalysts for hydrogen production is of scientific and technological importance. Catalysts with a core-shell structure for water dissociation have been extensively investigated. However, most of them are nanoparticles and thus their catalytic properties are inevitably limited by the use of binders in practice. Herein, this work reports a physical-metallurgy-based structural design strategy to develop a self-supported and unique nanoporous structure with core-shell-like ligaments, i.e., a Cu core surrounded by a NiO shell, formed on a metallic glass (MG) substrate. These newly developed noble metal-free catalysts exhibit outstanding HER performance; the overpotential reaches 67 mV at a current density of 10 mA cm-2, accompanied by a low Tafel slope of 40 mV dec-1 and good durability. More importantly, the current strategy could be readily applied to fabricate other nanoporous metals, which opens a new space for designing advanced catalysts as cost-effective electrode materials.
RESUMO
In this work, the stability behaviors of the state-of-the-art Fe/N/C and Pt/C catalysts (as well as the activation time of the latter) were first systematically investigated, under different cathode catalyst loadings, in the membrane electrode assemblies (MEA) in PEM fuel cells. Based on that, two types of cathode electrodes with the combination of Fe/N/C and Pt/C catalysts were developed (type I: layered hybrid catalysts with Pt/C next to the membrane and type II: uniformly mixed catalysts). In this way, the shortcomings of the Fe/N/C catalyst (the fast decay) and the Pt/C catalyst (the long activation time) can be compensated at the same time. The hybrid catalysts also showed a very short activation time (a few hours vs over 10 h for Pt/C with the same Pt loading). Comparing the two types of hybrid catalysts, type I shows a much higher current density. The loadings of the Fe/N/C and Pt/C catalysts in the hybrid electrode were systematically studied, with optimal values of 1.0 mg cm-2 for Fe/N/C and 0.035 mgPt cm-2 for Pt/C. The Pt loading of this hybrid catalyst (type I) at the cathode only takes ca. 30% of the U.S. Department of Energy (DOE) target of Pt usage (0.100 mgPt cm-2), while its mass activity of Pt (in H2/O2 PEMFC) is 0.22 A mgPt-1 at 0.9iR-free V, reaching half of the DOE activity target (0.44 A mgPt-1), which is among the best performances reported so far. Via both half-cell and single-cell electrochemical evaluations together with other characterizations, the origin of the improved activity and stability is believed to be the synergistic effect between Pt/C and Fe/N/C catalysts to ORR. This work provides an effective strategy for engineering highly performing MEA for the industrialization of PEM fuel cells.
RESUMO
Two-dimensional (2D) nanomaterials decorated with ultrasmall and well-alloyed bimetallic nanoparticles (NPs) have many important applications. Developing a facile and scalable 2D material/hybrid synthesis strategy is still a big challenge. Herein, a top-down corrosion strategy is developed to prepare ultrathin cobalt (oxy)hydroxide nanosheets decorated with ultrasmall (â¼1.6 nm) alloy NPs. The formation of ultrathin (oxy)hydroxide nanosheets has a restrain effect to prevent the growth of small NPs into bigger ones. Thanks to the ultrathin 2D nature and strong electronic interaction between Co(OH)2 and alloy NPs, the Pt-based binary alloy NPs are greatly stabilized by the Co(OH)2 nanosheets and the hybrids exhibit much enhanced electrocatalytic performance for water splitting. Especially, the mass activities of the PtPd- and PtCu-decorated samples for hydrogen evolution are â¼8 times that of Pt/C. When used as both cathode and anode electrocatalysts to split water, the hybrid nanosheets outperform the commercial Pt/C-RuO2 combination. At 10 mA cm-2, the needed potential is only 1.53 V. This work provides us a highly controllable and scalable means to produce clean 2D nanomaterials decorated with a series of alloy NPs such as PtPd, PtCu, AuNi, and so forth.
RESUMO
The Fe-catalyzed Fischer-Tropsch (FT) reaction constitutes the core of the coal-to-liquids (CTL) process, which converts coal into liquid fuels. Conventional Fe-based catalysts typically convert 30% of the CO feed to CO2 in the FT unit. Decreasing the CO2 release in the FT step will reduce costs and enhance productivity of the overall process. In this context, we synthesize phase-pure ε(')-Fe2C catalysts exhibiting low CO2 selectivity by carefully controlling the pretreatment and carburization conditions. Kinetic data reveal that liquid fuels can be obtained free from primary CO2. These catalysts displayed stable FT performance at 23 bar and 235°C for at least 150 hours. Notably, in situ characterization emphasizes the high durability of pure ε(')-Fe2C in an industrial pilot test. These findings contribute to the development of new Fe-based FT catalysts for next-generation CTL processes.
RESUMO
One of the well-known observations in the Fischer-Tropsch (FT) reaction is that the CH4 selectivity for cobalt catalysts is always higher than the value expected on the basis of the Anderson-Schulz-Flory (ASF) distribution. Depositing graphitic carbon on a cobalt catalyst strongly suppresses this non-ASF CH4, while the formation of higher hydrocarbons is much less affected. Carbon was laid down on the cobalt catalyst via the Boudouard reaction. We provide evidence that the amorphous carbon does not influence the FT reaction, as it can be easily hydrogenated under reaction conditions. Graphitic carbon is rapidly formed and cannot be removed. This unreactive form of carbon is located on terrace sites and mainly decreases the CO conversion by limiting CH4 formation. Despite nearly unchanged higher hydrocarbon yield, the presence of graphitic carbon enhances the chain-growth probability and strongly suppresses olefin hydrogenation. We demonstrate that graphitic carbon will slowly deposit on the cobalt catalysts during CO hydrogenation, thereby influencing CO conversion and the FT product distribution in a way similar to that for predeposited graphitic carbon. We also demonstrate that the buildup of graphitic carbon by 13CO increases the rate of C-C coupling during the 12C3H6 hydrogenation reaction, whose products follow an ASF-type product distribution of the FT reaction. We explain these results by a two-site model on the basis of insights into structure sensitivity of the underlying reaction steps in the FT mechanism: carbon formed on step-edge sites is involved in chain growth or can migrate to terrace sites, where it is rapidly hydrogenated to CH4. The primary olefinic FT products are predominantly hydrogenated on terrace sites. Covering the terraces by graphitic carbon increases the residence time of CH x intermediates, in line with decreased CH4 selectivity and increased chain-growth rate.
RESUMO
The resistive switching (RS) effect in various materials has attracted much attention due to its interesting physics and potential for applications. NiO is an important system and its RS effect has been generally explained by the formation/rupture of Ni-related conducting filaments. These filaments are unique since they are formed by an electroforming process, so it is interesting to explore their magnetoresistance (MR) behavior, which can also shed light on unsolved issues such as the nature of the filaments and their evolution in the RS process, and this behavior is also important for multifunctional devices. Here, we focus on MR behavior in NiO RS films with different resistance states. Rich and interesting MR behaviors have been observed, including the normal and anomalous anisotropic magnetoresistance and tunneling magnetoresistance, which provide new insights into the nature of the filaments and their evolution in the RS process. First-principles calculation reveals the essential role of oxygen migration into the filaments during the RESET process and can account for the experimental results. Our work provides a new avenue for exploration of the conducting filaments in resistive switching materials and is significant for understanding the mechanism of RS effect and multifunctional devices.
RESUMO
In the current research project, we have prepared a novel Sb@C nanosphere anode with biomimetic yolk-shell structure for Li/Na-ion batteries via a nanoconfined galvanic replacement route. The yolk-shell microstructure consists of Sb hollow yolk completely protected by a well-conductive carbon thin shell. The substantial void space in the these hollow Sb@C yolk-shell particles allows for the full volume expansion of inner Sb while maintaining the framework of the Sb@C anode and developing a stable SEI film on the outside carbon shell. As for Li-ion battery anode, they displayed a large specific capacity (634 mAh g-1), high rate capability (specific capabilities of 622, 557, 496, 439, and 384 mAh g-1 at 100, 200, 500, 1000, and 2000 mA g-1, respectively) and stable cycling performance (a specific capacity of 405 mAh g-1 after long 300 cycles at 1000 mA g-1). As for Na-ion storage, these yolk-shell Sb@C particles also maintained a reversible capacity of approximate 280 mAh g-1 at 1000 mA g-1 after 200 cycles.
RESUMO
Essential structural properties of the non-trivial "string-wall-bounded" topological defects in hexagonal manganites are studied through homotopy group theory and spherical aberration-corrected scanning transmission electron microscopy. The appearance of a "string-wall-bounded" configuration in RMnO3 is shown to be strongly linked with the transformation of the degeneracy space. The defect core regions (~50 Å) mainly adopt the continuous U(1) symmetry of the high-temperature phase, which is essential for the formation and proliferation of vortices. Direct visualization of vortex strings at atomic scale provides insight into the mechanisms and macro-behavior of topological defects in crystalline materials.
RESUMO
Resistive switching effect in conductor/insulator/conductor thin-film stacks is promising for resistance random access memory with high-density, fast speed, low power dissipation and high endurance, as well as novel computer logic architectures. NiO is a model system for the resistive switching effect and the formation/rupture of Ni nanofilaments is considered to be essential. However, it is not clear how the nanofilaments evolve in the switching process. Moreover, since Ni nanofilaments should be ferromagnetic, it provides an opportunity to explore the electromagnetic coupling in this system. Here, we report a direct observation of Ni nanofilaments and their specific evolution process for the first time by a combination of various measurements and theoretical calculations. We found that multi-nanofilaments are involved in the low resistance state and the nanofilaments become thin and rupture separately in the RESET process with subsequent increase of the rupture gaps. Theoretical calculations reveal the role of oxygen vacancy amount in the evolution of Ni nanofilaments. We also demonstrate electromagnetic coupling in this system, which opens a new avenue for multifunctional devices.