Risk assessment of driver performance in the oil and gas transportation industry: Analyzing the relationship between driver vigilance, attention, reaction time, and safe driving practices.

The increasing use of road traffic for land transportation has resulted in numerous road accidents and casualties, including those involving oil and gas tanker vehicles. Despite this, little empirical research has been conducted on the factors influencing tanker drivers' performance. This study aims to address this knowledge gap, particularly in the energy transportation industry, by examining the driving performance factors that affect tanker drivers and incorporating risk assessment measures. The model variables were identified from the literature and used to develop a survey questionnaire for the study. A total of 307 surveys were collected from Malaysian oil and gas tanker drivers, and the driving performance factors were contextually adjusted using the Exploratory Factor Analysis (EFA) approach. The driving performance model was developed using partial least squares structural equation modeling (PLS-SEM). The EFA results categorized driving performance into two constructs: 1) drivers' reaction time with ß = 0.320 and 2) attention and vigilance with ß value = 0.749. The proposed model provided full insight into how drivers' reaction time, attention, and vigilance impact drivers' performance in this sector, which can help identify potential risks and prevent accidents. The findings are significant in understanding the factors that affect oil and gas drivers' performance and can aid in enhancing oil and gas transportation management by including effective risk assessment measures to prevent fatal crashes.

Spatial differentiation of carbon emissions reduction potential for construction and demolition waste recycling.

Identifying the regional differences and drivers for carbon reduction of construction and demolition waste (C&DW) recycling is essential to combat climate change. This study aims to calculate the carbon reduction potential for C&DW recycling from 2006 to 2021 in China and investigates the spatial differences and driving factors of carbon reduction potential for C&DW waste by combining the Theil index, Gini coefficient, and geographic detector methods. The carbon reduction potential for C&DW recycling in China was "high in the east and low in the west" overall level, with an average annual growth rate of 6.27%. The overall differences in carbon reduction potential for C&DW recycling are decreasing, mainly due to intraregional differences and inter-provincial differences in Northeast China. The population size, urbanization rate, and technological effect are the key factors influencing carbon reduction potential for C&DW recycling. There are two types of interactions between influencing factor pairs: nonlinear enhancement and two-factor enhancement. This study's results can guide policymakers to devise relevant, regionally specific policies.

Identifying factors affecting the low uptake of reprocessed construction materials: A systematic literature review.

The success of demolition waste reverse logistics supply chains (DWRLSCs) depend on the market uptake of reprocessed construction materials (RCMs) since resource recovery will not be viable without a well-developed consumption process. However, usage of RCMs is sparse while there is also limited focus in existing research on their market uptake. Therefore, this systematic literature review (SLR) attempts to discern trends in research on the use of RCMs and identify factors that limit their uptake. 52 articles from three databases published between 2000 and 2021 were selected for descriptive and content analyses. Descriptive analysis showed growing research interest in the area over the last 5 years. Content analysis was underpinned by Attitude-Behaviour-Context (ABC) Theory which focuses on pro-environmental consumer decisions. As predicted by the theory, a mix of personal and contextual factors affect the low uptake of RCMs. Negative attitudes, reluctance to change the status quo and limited decision-making capabilities were identified as personal factors that limit the use of RCMs. Similarly, contextual factors such as price, quality, information availability, market availability, sourcing lead times and lack of regulations, standards, and specifications inhibit the use of such materials. The review also proposes several future research directions to expand knowledge around this domain.

Diverting demolition waste toward secondary markets through integrated reverse logistics supply chains: A systematic literature review.

Construction industry has adopted reverse logistics (RL) concept to manage high volumes of demolition waste (DW). However, DW RL supply chains (RLSCs) were found to be suffering from uncertainties, information deficiencies, and uncoordinated material flows. Improving supply chain integration (SCI), specifically external integration, across DW RLSCs was identified as a possible solution to overcome such problems. Despite this, studies that focus on external integration in DW RLSCs are limited. Using a systematic literature review (SLR), this study explores external integration in DW RLSCs. Sixty-six articles from three databases published between 2006 and 2020 were subjected to descriptive and content analysis. Arrangement of material, information, and financial flows across DW RLSCs, inhibitors of external integration, and potential measures for improving external integration were analyzed. Accordingly, material, information, and financial flows across DW RLSCs were mapped, and inhibitors of external integration, along with potential measures for improving external integration were identified. As the key outcome of this SLR, these findings were developed into a conceptual framework, which shows the main factors that inhibit and improve external integration in DW RLSCs. The framework will be useful in guiding further empirical research and informing industry practice. Several future research directions are also proposed to expand knowledge around the research domain.

Modelling the Relationship between the Nature of Work Factors and Driving Performance Mediating by Role of Fatigue.

Driving fatigue is a serious issue for the transportation sector, decreasing the driver's performance and increasing accident risk. This study aims to investigate how fatigue mediates the relationship between the nature of work factors and driving performance. The approach included a review of the previous studies to select the dimensional items for the data collection instrument. A pilot test to identify potential modification to the questionnaire was conducted, then structural equation modelling (SEM) was performed on a stratified sample of 307 drivers, to test the suggested hypotheses. Based on the results, five hypotheses have indirect relationships, four of which have a significant effect. Besides, the results show that driving fatigue partially mediates the relationship between the work schedule and driving performance and fully mediates in the relationship between work activities and driving performance. The nature of work and human factors is the most common reason related to road accidents. Therefore, the emphasis on driving performance and fatigue factors would thereby lead to preventing fatal crashes and life loss.

Quality assurance in reverse logistics supply chain of demolition waste: A systematic literature review.

The reverse logistics supply chain (RLSC) facilitates the greening of the traditional construction industry supply chain. Despite the growing interest in this approach, limited studies focus on quality assurance (QA) in RLSC, which is crucial to resolve the issue of the low quality in reprocessed products. This study aims to explore the elements which contribute to the QA of RLSC of demolition waste (DW) by conducting a systematic literature review (SLR). A total of 91 articles available in six search engines between 2000 and 2019 were exposed to descriptive and content analysis. The descriptive analysis revealed that most of the articles were experimental studies (35%) and published during the recent period of 2013-2019 (64%). Furthermore, 60% of articles were originated from developed countries while 32% originated from developing countries. The results of the content analysis established that an information-centric integrated system of process, people, policy and technology is needed for QA in RLSC, which is supported by government, regulatory bodies, industry and universities/research institutions. The study addresses the existing gap by proposing a conceptual framework, which could be considered as the foundation in enforcing QA in the RLSC of DW. Finally, the implications for research and practice and some recommendations for further research were presented. The study facilitates in paving the path to sustainable development through building the foundation to enforce QA in RSLC of DW.

Factors driving the implementation of reverse logistics: A quantified model for the construction industry.

In the light of increased environmental concerns and the unsustainability of current construction practices, 'reverse logistics' (RL) has emerged as a remedial strategy, whereby decommissioned buildings are salvaged and returned back through the value chain for recovery, refurbishment and reuse. The drivers that impact the uptake of RL are known, but if sustainability outcomes are to be enhanced, the strength of those drivers must be quantified in order to ascertain where efforts should be focused. This study aims to quantify the effects of known drivers on RL, and in so doing identify action items with the greatest potential to positively improve RL outcomes. RL drivers are culled from extant research, and categorized as economic, environmental, or social forces. A conceptual model is developed and tested against questionnaire results drawn from 49 expert respondents active in the South Australian construction industry. The results are analyzed using structured equation modeling. Economic and environmental drivers, such as the continuing relative high cost of salvaged items, along with expediency of cost, time and quality objectives overshadowing regulatory demands for use of such salvaged items, are shown to predict 34% of the variations in implementing RL. Of particular interest is the finding contradicting previous studies, showing that social drivers, such as perceived benefits from 'going green' had no significant impact. Thus, the road-map to improving RL outcomes lies in reducing costs of salvaged materials, augmenting environmental policies that promoted their use, and to initiate a regulatory framework to generate compliance. This insight will be of interest to industry policymakers and environmental strategists alike.

Reverse logistics in the construction industry.

Reverse logistics in construction refers to the movement of products and materials from salvaged buildings to a new construction site. While there is a plethora of studies looking at various aspects of the reverse logistics chain, there is no systematic review of literature on this important subject as applied to the construction industry. Therefore, the objective of this study is to integrate the fragmented body of knowledge on reverse logistics in construction, with the aim of promoting the concept among industry stakeholders and the wider construction community. Through a qualitative meta-analysis, the study synthesises the findings of previous studies and presents some actions needed by industry stakeholders to promote this concept within the real-life context. First, the trend of research and terminology related with reverse logistics is introduced. Second, it unearths the main advantages and barriers of reverse logistics in construction while providing some suggestions to harness the advantages and mitigate these barriers. Finally, it provides a future research direction based on the review.