Power Efficiency Enhancement of Organic Light-Emitting Diodes Due to the Favorable Horizontal Orientation of a Naphthyridine-Based Thermally Activated Delayed Fluorescence Luminophore.

Four emitters based on the naphthyridine acceptor moiety and various donor units exhibiting thermally activated delayed fluorescence (TADF) were designed and synthesized. The emitters exhibited excellent TADF properties with a small ΔE ST and a high photoluminescence quantum yield. A green TADF organic light-emitting diode based on 10-(4-(1,8-naphthyridin-2-yl)phenyl)-10H-phenothiazine exhibited a maximum external quantum efficiency of 16.4% with Commission Internationale de L'éclairage coordinates of (0.368, 0.569) as well as a high current and power efficiency of 58.6 cd/A and 57.1 lm/W, respectively. The supreme power efficiency is a record-high value among the reported values of devices with naphthyridine-based emitters. This results from its high photoluminescence quantum yield, efficient TADF, and horizontal molecular orientation. The molecular orientations of the films of the host and the host doped with the naphthyridine emitter were explored by angle-dependent photoluminescence and grazing-incidence small-angle X-ray scattering (GIWAXS). The orientation order parameters (ΘADPL) were found to be 0.37, 0.45, 0.62, and 0.74 for the naphthyridine dopants with dimethylacridan, carbazole, phenoxazine, and phenothiazine donor moieties, respectively. These results were also proven by GIWAXS measurement. The derivative of naphthyridine and phenothiazine was shown to be more flexible to align with the host and to show the favorable horizontal molecular orientation and crystalline domain size, benefiting the outcoupling efficiency and contributing to the device efficiency.

Effects of electron transport layer thickness on light extraction in corrugated OLEDs.

This study reported the effects of electron transport layer (ETL) thickness on light extraction in corrugated organic light-emitting diodes (OLEDs) and each layer in OLEDs exhibited a periodical corrugated structure, which was determined by depositing thin films on a glass substrate with a nanoimprinted blazed grating structure. The insight is that light extraction in corrugated OLEDs significantly depends on the ETL thickness. Varying the ETL thickness changed the distribution of carrier recombination and led to exciton formation and optical interference, thereby resulting in different attribution of optical loss modes in OLEDs, which increased or even decreased light extraction and device efficiency. Trapped light extraction from the surface plasmon polariton (SPP) and waveguide (WG) modes was identified by splitting the light into transverse electric and transverse magnetic emissions. Thus, the contributions from the individual SPP and WG modes to the external quantum efficiency (EQE) were distinctly clarified by comparing the experimental results with the theoretical calculations. At the ETL thickness of 115 nm, the corrugated OLED exhibited a significantly enhanced (1.83-fold) EQE compared to the planar one due to the effective extraction of trapped light from the SPP and WG modes. The EQE was enhanced by 0.5%, wherein 0.39% came from the WG mode and 0.11% came from the SPP mode.

An extended π-backbone for highly efficient near-infrared thermally activated delayed fluorescence with enhanced horizontal molecular orientation.

Near-infrared thermally activated delayed fluorescence (NIR-TADF) materials with emission over 700 nm have been insufficiently investigated mainly due to the limited choice of strong donor/acceptor units for molecular construction and the limited electronic coupling between the donors and acceptors. Herein, a novel D-A1-A2-A3 configuration was developed for the design of a NIR-TADF material (TPA-CN-N4-2PY), in which three types of sub-acceptor units (CN: cyano; N4: dipyrido[3,2-a:2',3'-c]phenazine; PY: pyridine) were incorporated into a molecular skeleton to reinforce the electron-accepting strength. The attachment of two pyridine units on TPA-CN-N4 produced TPA-CN-N4-2PY with an extended π-backbone, which shifted the electroluminescence (EL) emission into the NIR region and enhanced the horizontal ratio of emitting dipole orientation (Θ//) simultaneously. TPA-CN-N4-2PY-based OLEDs demonstrated a record-high external quantum efficiency (EQE) of 21.9% with an emission peak at 712 nm and Θ// = 85% at the doping ratio of 9.0 wt%. On the contrary, the parent compound TPA-CN-N4-based OLEDs at the same doping ratio achieved an EQE of 23.4% at 678 nm with Θ// = 75%. This multiple sub-acceptors approach could enrich the design strategy of the NIR-TADF materials, and the large conjugated system could improve the Θ// for achieving efficient emitters.

Deep Blue Fluorescent Material with an Extremely High Ratio of Horizontal Orientation to Enhance Light Outcoupling Efficiency (44%) and External Quantum Efficiency in Doped and Non-Doped Organic Light-Emitting Diodes.

A novel bis-4Ph-substituted 9,10-dipehnylanthracene deep blue [1931 CIE (0.15, 0.08)] fluorescent compound, AnB4Ph, has been synthesized and characterized for organic light-emitting diode (OLED) applications. Our experimental study of AnB4Ph excludes the possibility of triplet-triplet annihilation, hybridized local and charge transfer, or thermally activated delayed fluorescent characteristics of the material. Since the solid-state photoluminescence quantum yield of AnB4Ph was determined to be 48%, assuming a 100% for the charge recombination efficiency, the light outcoupling efficiency (ηout) of an AnB4Ph non-doped OLED achieving an external quantum efficiency (EQE) of 5.3% is at least 44%, which is more than twofold higher than 20% for conventional OLEDs. Both grazing incidence wide-angle X-ray scattering (GIWAXS) and angle-dependent photoluminescence (ADPL) measurements reveal AnB4Ph having a high value of order parameter (SGIWAXS) of 0.61 for a ππ stacking along the normal direction and an orientation order parameter (SADPL) for a horizontal emitting dipole moment of -0.50 or Θ (horizontal-dipole ratios) of 100%, respectively. Otherwise, a refractive index (n) measurement provides a n = 1.80 for AnB4Ph thin films. Based on ηout = 1.2 × n-2, the calculated ηout is 37%, which is also in accordance with the results of GIWAXS and ADPL. We have also fabricated the classical fluorescent DPAVBi-doped AnB4Ph OLEDs, which display a true blue [1931 CIE (0.15 and 0.16)] electroluminescence with a high efficiency (EQE = 6.9%), surpassing the conventional ∼5% EQE. Based on an ηout of 42% for DPAVBi-doped AnB4Ph OLEDs, our studies suggest that the extremely horizontally aligned AnB4Ph host material exerts the same horizontal alignment on the DPAVBi dopant molecules.

Nanostructured Molybdenum Trioxide Layer on the Silver Anode of a Top-Incident Organic Photovoltaic Device.

A nanostructured molybdenum trioxide (MoO3) layer was successfully fabricated utilizing various deposition rates, employed as an anodic buffer layer to separate the active layer from a silver anode and modifying the anodic surface to facilitate hole transportation for top-incident organic photovoltaic (TIOPV) devices. The deposition rate and thickness of the MoO3 layer were crucial parameters for determining the surface morphology and work function, and the internal optical field distribution, respectively. These factors affected the performance of the devices in terms of their open-circuit voltage (VOC), short-circuit current density (JSC), and fill factor (FF). The baseline TIOPV device without a buffer layer had a power conversion efficiency (PCE) of only 0.47%. By contrast, with a smooth 20-nm MoO3 buffer layer fabricated using a deposition rate of 1 Å/s (which prevented problems caused by the Ag anode), another fabricated TIOPV device had substantially higher VOC, JSC and FF values, which improved the PCE by a factor of 6.2 to 2.92%. When an additional 5-nm nanostructured MoO3 layer was deposited at a deposition rate of 0.5 Å/s, the most efficient TIOPV device had an even greater PCE, a factor of 7.5 times higher at 3.53%.

Lifetime elongation of quantum-dot light-emitting diodes by inhibiting the degradation of hole transport layer.

Developing a colloidal quantum-dot light-emitting device (QDLED) with high efficiency and good reliability is necessarily preliminary for the next-generation high-quality display application. Most QDLED reports are focused on efficiency improvement, but the device operational lifetime issue is less addressed and also the relevant degradation mechanisms. This study achieved a 1.72 times elongation in the operational lifetime and a 9 times improvement in the efficiency of QDLED by inserting a hole-transporting/electron-blocking poly(9-vinylcarbazole) (PVK) layer, which prevented operational degradation on poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,4'-(N-(4-secbutylphenyl))-diphenylamine)] (TFB) hole-transporting layer and also confined the electron in the QD-emitting layer. Although the TFB/PVK HTL structure is a well-known pair to enhance the device performance, its detailed mechanisms were rarely mentioned, especially for relative operational lifetime issues. Herein, a new insight behind operational lifetime elongation of QDLED is disclosed through various fundamental experiments including steady-state photoluminescence, transient electroluminescence and single-carrier only devices. Evidently, other than QD degradation, this study found that the other crucial factor that decreased the device lifetime was TFB-HTL degradation using steady-state photoluminescence and transient electroluminescence analyses. The PVK electron-only device exhibited a stable voltage value when it was driven by fixed current, which also affirmed that PVK has excellent electron-stability characteristics.

Bistriazoles with a Biphenyl Core Derivative as an Electron-Favorable Bipolar Host of Efficient Blue Phosphorescent Organic Light-Emitting Diodes.

High-quality host materials are indispensable for the construction in the emitting layer of efficient organic light-emitting diodes (OLEDs), especially in a guest and host system. The good carrier transport and energy transfer between the host and emitters are out of necessity. In this work, a wide bandgap and bipolar organic compound, 2,2'-bis(4,5-diphenyl-(1,2,4)-triazol-3-yl)biphenyl (BTBP), conjugating two electron-transporting triazole moieties on a hole-transporting biphenyl core, was synthesized and characterized. The wide bandgap of 4.0 eV makes the promise in efficient energy transfer between the host and various color emitters to apply as the universal host, especially for blue emitters. The close electron and hole mobilities perform the same order of 10-5 cm2·V-1·s-1, identified as bipolar behavior and benefited for carrier balance at low bias. Although carrier transportation belongs to bipolar behavior at a low electrical field, the electron mobility is much faster than the hole one at a high electrical field and belongs to electron-transporting behavior. Employing the BTBP as the host matrix mixed with a phosphor dopant, iridium(III)bis[4,6-di-fluorophenyl-pyridinato-N,C2]picolinate, a high-efficiency sky-blue phosphorescent organic light-emitting diode (OLED) was achieved with a maximum current efficiency of 65.9 cd/A, maximum power efficiency of 62.8 lm/W, and maximum external quantum efficiency of 30.2%.

Corrugated organic light-emitting diodes to effectively extract internal modes.

We report a corrugated structure to effectively extract the surface plasmon polaritons (SPP) and waveguiding modes in organic light-emitting diodes (OLEDs). This structure is formed by nano-imprint of blazed gratings. To study the optimum extraction condition in terms of grating pitches, we compare the light extraction efficiency of corrugated OLEDs with three kinds of pitches, showing a 42.00% external quantum efficiency (EQE) enhancement ratio with this internal structure. Due to the transfer of SPP and waveguiding modes into substrate mode, the EQE enhancement ratio can be further pushed to 103.02% by attaching a macrolens. The simulation verifies the experimental results and shows the extraction mechanism of the corrugated structure towards transverse electric (TE) and transverse magnetic (TM) waves. We foresee that this method is able to enhance the optical efficiency of devices for both mass-production OLED lighting and display in a cost-effective way.

Carrier Transport and Recombination Mechanism in Blue Phosphorescent Organic Light-Emitting Diode with Hosts Consisting of Cabazole- and Triazole-Moiety.

In this study, we demonstrated a blue phosphorescent organic light-emitting diode (BPOLED) based on a host with two carbazole and one trizole (2CbzTAZ) moiety, 9,9'-(2-(4,5-diphenyl-4H-1,2,4-triazol-3-yl)-1,3-phenylene)bis(9H-carbazole), that exhibits bipolar transport characteristics. Compared with the devices with a carbazole host (N,N'-dicarbazolyl-3,5-benzene, (mCP)), triazole host (3-(biphenyl-4-yl)-5-(4-tert-butylphenyl)-4-phenyl-4H-1,2,4-triazole, (TAZ)), or a physical mixture of mCP:TAZ, which exhibit hole, electron, and bipolar transport characteristics, respectively, the BPOLED with the bipolar 2CbzTAZ host exhibited the lowest driving voltage (6.55 V at 10 mA/cm2), the highest efficiencies (maximum current efficiency of 52.25 cd/A and external quantum efficiency of 23.89%), and the lowest efficiency roll-off, when doped with bis[2-(4,6-difluorophenyl)pyridinato-C2,N](picolinato)iridium(III) (FIrpic) as blue phosphor. From analyses of light leakage of the emission spectra of electroluminescence, transient electroluminescence, and partially doped OLEDs, it was found that the recombination zone was well confined inside the emitting layer and the recombination rate was most efficient in a 2CbzTAZ-based OLED. For the other cases using mCP, TAZ, and mCP:TAZ as hosts, electrons and holes transported with different routes that resulted in carrier accumulation on different organic molecules and lowered the recombination rate.

New D-A-A-Configured Small-Molecule Donors for High-Efficiency Vacuum-Processed Organic Photovoltaics under Ambient Light.

Four new donor-acceptor-acceptor (D-A-A) type molecules (DTCPB, DTCTB, DTCPBO, and DTCTBO), wherein benzothiadiazole or benzoxadiazole serves as the central A bridging triarylamine (D) and cyano group (terminal A), have been synthesized and characterized. The intramolecular charge-transfer character renders these molecules with strong visible light absorption and forms antiparallel dimeric crystal packing with evident π-π intermolecular interactions. The characteristics of the vacuum-processed photovoltaic device with a bulk heterojunction active layer employing these molecules as electronic donors combining C70 as electronic acceptor were examined and a clear structure-property-performance relationship was concluded. Among them, the DTCPB-based device delivers the best power conversion efficiency (PCE) up to 6.55% under AM 1.5 G irradiation. The study of PCE dependence on the light intensity indicates the DTCPB-based device exhibits superior exciton dissociation and less propensity of geminated recombination, which was further verified by a steady photoluminescence study. The DTCPB-based device was further optimized to give an improved PCE up to 6.96% with relatively high stability under AM 1.5 G continuous light-soaking for 150 h. This device can also perform a PCE close to 16% under a TLD-840 fluorescent lamp (800 lux), indicating its promising prospect for indoor photovoltaic application.

Simple Molecular-Engineering Approach for Enhancing Orientation and Outcoupling Efficiency of Thermally Activated Delayed Fluorescent Emitters without Red-Shifting Emission.

The inclusion of a tetraphenylbenzene (4Ph) unit in thermally activated delayed fluorescence emitters is demonstrated as a novel strategy for greatly enhancing the horizontally oriented alignment of the emitters without shifting the emission spectrum to longer wavelengths. Doping of blue-emitting 4PhOXDDMAC or greenish-blue-emitting 4PhOXDPXZ into o-DiCbzBz host layers yielded much higher degrees of horizontally oriented alignment for the emitter (up to 92%) compared to those when the 4Ph unit was excluded (69 and 75%, respectively). The enhanced alignment results in high outcoupling efficiencies of 24 and 35% in organic light-emitting diodes based on 4PhOXDDMAC and 4PhOXDPXZ, respectively, and boosts the external quantum efficiencies to values (8.8 and 29.2%, respectively) that are higher than what would be expected for randomly oriented emitters (outcoupling efficiency of 20%). These enhancements are achieved while avoiding the redshift that often occurs using the common strategy of increasing molecular length and, thereby, conjugation, to increase orientation.

Construction of Highly Efficient Carbazol-9-yl-Substituted Benzimidazole Bipolar Hosts for Blue Phosphorescent Light-Emitting Diodes: Isomer and Device Performance Relationships.

Four isomers of carbazol-9-yl-substituted 1,2-diphenylbenzimidazole at 7, 6, 5, and 4 positions, named as 1-CbzBiz, 2-CbzBiz, 3-CbzBiz, and 4-CbzBiz, respectively, have been synthesized. Instead of having an identical molecular weight, the CbzBiz's have their glass transition temperatures ( Tg) spanning a large range from 53 to 90 °C. Their Tg and melting point ( Tm) basically obey the Boyer-Kauzmann rule ( Tg = g· Tm with g ≈ 0.7) on the absolute temperature scale (in kelvins). However, while 1-CbzBiz and 4-CbzBiz demonstrate a small g value of 0.66, which is significantly smaller than other common organic glass molecules, 3-CbzBiz shows an unexpectedly high g value of 0.73, implying higher intermolecular interactions in the glass. These CbzBiz's are suitable hosts for bis[2-(4,6-difluorophenyl)pyridinato- C2, N](picolinato)iridium(III) (FIrpic) in phosphorescence organic light-emitting diodes (PhOLEDs). The optimized PhOLED of indium tin oxide/4,4'-cyclohexylidenebis[ N, N-bis(4-methylphenyl)benzenamine]/4Cbz/4-CbzBiz-FIrpic(15%)/diphenylbis(4-(pyridin-3-yl)phenyl)silane/LiF-Al shows a maximum brightness of 18 760 cd/m2, a current efficiency of 64.1 cd/A, and the external quantum efficiency of 30.9%.

Exciton dynamics in heterojunction thin-film devices based on exciplex-sensitized triplet-triplet annihilation.

Exciton dynamics in a solid-state exciplex sensitized triplet-triplet annihilation (ESTTA) system are studied using transient photoluminescence (TrPL) measurements. The ESTTA system is a trilayer structure with 4,4',4''-tris(N-3-methyphenyl-N-phenyl-amino)triphenylamine (m-MTDATA) acting as the electron donor, 1-(2,5-dimethyl-4-(1-pyrenyl)phenyl)pyrene (DMPPP) as a triplet-diffusion-singlet-blocking (TDSB) layer, and 9,10-bis(2'-naphthyl) anthracene (ADN), acting as the electron acceptor and emitter. The thicknesses of the m-MTDATA and ADN layers are 30 nm, while the thickness of the DMPPP layer is varied to characterize its effect on the singlet quenching of the ADN emission. We find that electron transfer via tunneling through the DMPPP layer is the dominant quenching channel, with a characteristic length of ∼5 nm. Doping the high photoluminescence quantum yield molecule 4,4'-bis[2-(4-(N,N-diphenylamino)phenyl)vinyl]biphenyl (DPAVBi) into the ADN layer enhanced the overall intensity of the ESTTA signal but did not prevent quenching by exciplex formation. The trilayer configuration (m-MTDATA/DMPPP/ADN) can effectively prevent ADN singlets from being quenched by electron transfer and exciplex formation, and a key property of the DMPPP is its tendency to not undergo electron transfer to the ADN.

Efficient Triplet-Triplet Annihilation Upconversion in an Electroluminescence Device with a Fluorescent Sensitizer and a Triplet-Diffusion Singlet-Blocking Layer.

Solid-state triplet-triplet annihilation upconversion (TTAUC) blue emission in an electroluminescence device (i.e., an organic light-emitting diode (OLED)) is demonstrated. A conventional green fluorophore, tris-(8-hydroxyquinoline)aluminum (Alq3 ), is employed as the sensitizer that generates 75% triplet under electrical pumping for the blue triplet-triplet annihilation emitter, 9,10-bis(2'-naphthyl) anthracene (ADN), with the heterojunction bilayer structure. The operation lifetime is elongated both for ADN blue (4.1x) and Alq3 green (34.8%) emission due to efficient use of excitons and separation of recombination and emission zone. To reduce the singlet quenching (SQ) of blue TTAUC signal by the Alq3 sensitizer with lower bandgap, 1-(2,5-dimethyl-4-(1-pyrenyl)phenyl)pyrene (DMPPP) is inserted between the Alq3 and ADN as a triplet-diffusion-and-singlet-blocking layer. DMPPP exhibits triplet energy close to Alq3 and higher than ADN, as well as higher singlet energy than both Alq3 and ADN. It allows triplet diffusion from Alq3 to ADN, but blocks the SQ of the blue TTAUC signal by Alq3 . 86.1% intrinsic efficiency of TTAUC is demonstrated in this trilayer (Alq3 /DMPPP/ADN) OLED.

Modeling of carrier transport in organic light emitting diode with random dopant effects by two-dimensional simulation.

To model the carrier transport in organic light-emitting diodes (OLEDs) with random dopant effects in the emitting layer, two-dimensional simulation was used. By including the Gaussian shape density of states and field-dependent mobility in the Poisson and drift-diffusion solver, the carrier transport, trapping in the dopant state, and radiative recombination were accurately modeled. To examine the model, the current-voltage characteristics of organic light-emitting devices were compared. The host material in the emitting layer was 2,2-bis(1-phenyl-1H-benzo[d]imidazol-2-yl)biphenyl (BImBP), which was doped with bis[2-(4,6-difluorophenyl)pyridinato-C2,N](picolinato)iridium(III) (FIrpic) at various concentrations. By including the random doping model, the trend of mobility was altered and the radiative efficiency fitted experimental values well.

Exciplex-Sensitized Triplet-Triplet Annihilation in Heterojunction Organic Thin-Film.

A new concept for organic light-emitting diodes (OLEDs) is presented, which is called exciplex-sensitized triplet-triplet annihilation (ESTTA). The exciplex formed at the organic heterojunction interface of 4,4',4″-tris(N-3-methyphenyl-N-phenyl-amino) triphenylamine and 9,10-bis(2'-naphthyl) anthracene (ADN) is used to sensitize the triplet-triplet annihilation (TTA) process on the ADN molecules. This results in a turn-on voltage (2.2 V) of the blue emission from the OLED below the bandgap (2.9 eV). From the transient electroluminescence measurement, blue emission totally came from the TTA process without direct recombination on the ADN molecules. The blue singlet exciton from the TTA process can be quenched by energy transfer to the exciplex, as revealed by transient photoluminescence measurements. This can be prevented by blocking the energy transfer path and improving the radiative recombination rate of blue emission. With the insertion of the "triplet diffusion and singlet blocking (TDSB)" layer and the incorporation of the dopant material, an ESTTA-OLED with external quantum efficiency of 5.1% was achieved, which consists of yellow and blue emission coming from the exciplex and ESTTA process, respectively.

Easy Access to NO2 -Containing Donor-Acceptor-Acceptor Electron Donors for High Efficiency Small-Molecule Organic Solar Cells.

Two donor-acceptor-acceptor (D-A-A)-type molecules incorporating nitrobenzoxadiazole (NBO) as the A-A block and ditolylamine as the D block bridged through a phenylene (PNBO) and a thiophene (TNBO) spacer were synthesized in a one-step coupling reaction. Their electronic, photophysical, and thermal properties; crystallographic analysis; and theoretical calculations were studied to establish a clear structure-property relationship. The results indicate that the quinoidal character of the thiophene bridge strongly governs the structural features and crystal packings (herringbone vs. brickwork) and thus the physical properties of the compounds. PNBO and TNBO were utilized as electron donors combined with C70 as the electron acceptor in the active layer of vacuum-processed bulk heterojunction small-molecule organic solar cells (SMOSCs). The power conversion efficiency of both PNBO- and TNBO-based OSCs exceeded 5 %. The ease of accessibility of PNBO and TNBO demonstrates the potential for simple and economical synthesis of electron donors in vacuum-processed SMOSCs.

Orthogonally Substituted Benzimidazole-Carbazole Benzene As Universal Hosts for Phosphorescent Organic Light-Emitting Diodes.

The novel ambipolar hosts of o-CbzBz and o-DiCbzBz contain carbazole and benzimidazole through an ortho-connection. The orthogonal conformations cause the triplet state to be confined at the carbazole units to secure efficient energy transfer. The phosphorescent organic light-emitting diodes (PhOLEDs) show a high current efficiency, power efficiency, and low efficiency roll-off. o-DiCbzBz can be used as a host for sky-blue, green, and orange-red PhOLEDs, giving 57.5, 78.4, and 60.3 cd/A, respectively.

Efficiency Improvement of Organic Photovoltaic Using Ozone and PEDOT:PSS Modifications on Ag Anode.

We demonstrated a fabrication process using UV-Ozone treatment to obtain a qualified silver oxide (AgOx) film to be anode, and then spinning the poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) ( PEDOT: PSS) layer on the Ag/AgOx anode to smooth the its surface, resulting to efficiency improvement of the organic photovoltaic (OPV). The basic OPV structure mainly contained with a high reflective Ag anode, a semitransparent Ag cathode and a planar heterojunction small molecular active layer. Surface morphologies, roughness, reflectivity and workfunction of Ag/AgOx anode with various UV-Ozone treatment times were investigated to affect the device performance. With 60 sec UV-Ozone treatment on Ag/AgOx anode, OPV showed a good power conversion efficiency (PCE) of 0.96%. The further PEDOT: PSS lamination on 60 sec Ag/AgOx anode, OPV exhibited an advanced PCE up to 1.42%.

Optimization of Metal Oxides Thickness and Related Organic Electroluminescent Device Performance.

In this study, three commercial transition metal oxides such as molybdenum trioxide (MoO3), tungsten trioxide (WO3), and vanadium pent-oxide (V2O5) were employed as hole-injection layer to improve the electrical and optical performance of organic light-emitting diodes (OLEDs). The layer thickness of MoO3, WO3 and V2O5 were respectively varied by 1, 2, 5 and 10 nm inside blue OLED to characterize their effects on device performance. The optimal OLED with a 5 nm MoO3 hole-injection layer performs an enhancement of 12.9% in current efficiency, 17.5% in power efficiency and 9.3% in maximum external quantum efficiency, comparing to that of reference device without hole-injection layer.