Targeted viral adaptation generates a simian-tropic hepatitis B virus that infects marmoset cells.

Hepatitis B virus (HBV) only infects humans and chimpanzees, posing major challenges for modeling HBV infection and chronic viral hepatitis. The major barrier in establishing HBV infection in non-human primates lies at incompatibilities between HBV and simian orthologues of the HBV receptor, sodium taurocholate co-transporting polypeptide (NTCP). Through mutagenesis analysis and screening among NTCP orthologues from Old World monkeys, New World monkeys and prosimians, we determined key residues responsible for viral binding and internalization, respectively and identified marmosets as a suitable candidate for HBV infection. Primary marmoset hepatocytes and induced pluripotent stem cell-derived hepatocyte-like cells support HBV and more efficient woolly monkey HBV (WMHBV) infection. Adapted chimeric HBV genome harboring residues 1-48 of WMHBV preS1 generated here led to a more efficient infection than wild-type HBV in primary and stem cell derived marmoset hepatocytes. Collectively, our data demonstrate that minimal targeted simianization of HBV can break the species barrier in small NHPs, paving the path for an HBV primate model.

Analysis of Host Responses to Hepatitis B and Delta Viral Infections in a Micro-scalable Hepatic Co-culture System.

Hepatitis B virus (HBV) remains a major global health problem with 257 million chronically infected individuals worldwide, of whom approximately 20 million are co-infected with hepatitis delta virus (HDV). Progress toward a better understanding of the complex interplay between these two viruses and the development of novel therapies have been hampered by the scarcity of suitable cell culture models that mimic the natural environment of the liver. Here, we established HBV and HBV/HDV co-infections and super-infections in self-assembling co-cultured primary human hepatocytes (SACC-PHHs) for up to 28 days in a 384-well format and highlight the suitability of this platform for high-throughput drug testing. We performed RNA sequencing at days 8 and 28 on SACC-PHHs, either HBV mono-infected or HBV/HDV co-infected. Our transcriptomic analysis demonstrates that hepatocytes in SACC-PHHs maintain a mature hepatic phenotype over time, regardless of infection condition. We confirm that HBV is a stealth virus, as it does not induce a strong innate immune response; rather, oxidative phosphorylation and extracellular matrix-receptor interactions are dysregulated to create an environment that promotes persistence. Notably, HDV co-infection also did not lead to statistically significant transcriptional changes across multiple donors and replicates. The lack of innate immune activation is not due to SACC-PHHs being impaired in their ability to induce interferon stimulated genes (ISGs). Rather, polyinosinic:polycytidylic acid exposure activates ISGs, and this stimulation significantly inhibits HBV infection, yet only minimally affects the ability of HDV to infect and persist. Conclusion: These data demonstrate that the SACC-PHH system is a versatile platform for studying HBV/HDV co-infections and holds promise for performing chemical library screens and improving our understanding of the host response to such infections.

Subacute Transplantation of Native and Genetically Engineered Neural Progenitors Seeded on Microsphere Scaffolds Promote Repair and Functional Recovery After Traumatic Brain Injury.

There is intense interest and effort toward regenerating the brain after severe injury. Stem cell transplantation after insult to the central nervous system has been regarded as the most promising approach for repair; however, engrafting cells alone might not be sufficient for effective regeneration. In this study, we have compared neural progenitors (NPs) from the fetal ventricular zone (VZ), the postnatal subventricular zone, and an immortalized radial glia (RG) cell line engineered to conditionally secrete the trophic factor insulin-like growth factor 1 (IGF-1). Upon differentiation in vitro, the VZ cells were able to generate a greater number of neurons than subventricular zone cells. Furthermore, differentiated VZ cells generated pyramidal neurons . In vitro, doxycycline-driven secretion of IGF-1 strongly promoted neuronal differentiation of cells with hippocampal, interneuron and cortical specificity. Accordingly, VZ and engineered RG-IGF-1-hemagglutinin (HA) cells were selected for subsequent in vivo experiments. To increase cell survival, we delivered the NPs attached to a multifunctional chitosan-based scaffold. The microspheres containing adherent NPs were injected subacutely into the lesion cavity of adult rat brains that had sustained controlled cortical impact injury. At 2 weeks posttransplantation, the exogenously introduced cells showed a reduction in stem cell or progenitor markers and acquired mature neuronal and glial markers. In beam walking tests assessing sensorimotor recovery, transplanted RG cells secreting IGF-1 contributed significantly to functional improvement while native VZ or RG cells did not promote significant recovery. Altogether, these results support the therapeutic potential of chitosan-based multifunctional microsphere scaffolds seeded with genetically modified NPs expressing IGF-1 to promote repair and functional recovery after traumatic brain injuries.

Long-term liver-specific functions of hepatocytes in electrospun chitosan nanofiber scaffolds coated with fibronectin.

In this study, a new 3D liver model was developed using biomimetic nanofiber scaffolds and co-culture system consisting of hepatocytes and fibroblasts for the maintenance of long-term liver functions. The chitosan nanofiber scaffolds were fabricated by the electrospinning technique. To enhance cellular adhesion and spreading, the surfaces of the chitosan scaffolds were coated with fibronectin (FN) by adsorption and evaluated for various cell types. Cellular phenotype, protein expression, and liver-specific functions were extensively characterized by immunofluorescent and histochemical stainings, albumin enzyme-linked immunosorbent assay and Cytochrome p450 detoxification assays, and scanning electron microscopy. The electrospun chitosan scaffolds exhibited a highly porous and randomly oriented nanofibrous structure. The FN coating on the surface of the chitosan nanofibers significantly enhanced cell attachment and spreading, as expected, as surface modification with this cell adhesion molecule on the chitosan surface is important for focal adhesion formation and integrin binding. Comparison of hepatocyte mono-cultures and co-cultures in 3D culture systems indicated that the hepatocytes in co-cultures formed colonies and maintained their morphologies and functions for prolonged periods of time. The 3D liver tissue model developed in this study will provide useful tools toward the development of engineered liver tissues for drug screening and tissue engineering applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2119-2128, 2017.

A Versatile Method of Patterning Proteins and Cells.

Substrate and cell patterning techniques are widely used in cell biology to study cell-to-cell and cell-to-substrate interactions. Conventional patterning techniques work well only with simple shapes, small areas and selected bio-materials. This article describes a method to distribute cell suspensions as well as substrate solutions into complex, long, closed (dead-end) polydimethylsiloxane (PDMS) microchannels using negative pressure. This method enables researchers to pattern multiple substrates including fibronectin, collagen, antibodies (Sal-1), poly-D-lysine (PDL), and laminin. Patterning of substrates allows one to indirectly pattern a variety of cells. We have tested C2C12 myoblasts, the PC12 neuronal cell line, embryonic rat cortical neurons, and amphibian retinal neurons. In addition, we demonstrate that this technique can directly pattern fibroblasts in microfluidic channels via brief application of a low vacuum on cell suspensions. The low vacuum does not significantly decrease cell viability as shown by cell viability assays. Modifications are discussed for application of the method to different cell and substrate types. This technique allows researchers to pattern cells and proteins in specific patterns without the need for exotic materials or equipment and can be done in any laboratory with a vacuum.

Optimizing a multifunctional microsphere scaffold to improve neural precursor cell transplantation for traumatic brain injury repair.

Tissue engineering using stem cells is widely used to repair damaged tissues in diverse biological systems; however, this approach has met with less success in regenerating the central nervous system (CNS). In this study we optimized and characterized the surface chemistry of chitosan-based scaffolds for CNS repair. To maintain radial glial cell (RGC) character of primitive neural precursors, fibronectin was adsorbed to chitosan. The chitosan was further modified by covalently linking heparin using genipin, which then served as a linker to immobilize fibroblast growth factor-2 (FGF-2), creating a multifunctional film. Fetal rat neural precursors plated onto this multifunctional film proliferated and remained multipotent for at least 3 days without providing soluble FGF-2. Moreover, they remained less mature and more highly proliferative than cells maintained on fibronectin-coated substrates in culture medium supplemented with soluble FGF-2. To create a vehicle for cell transplantation, a 3% chitosan solution was electrosprayed into a coagulation bath to generate microspheres (range 30-100 µm, mean 64 µm) that were subsequently modified. Radial glial cells seeded onto these multifunctional microspheres proliferated for at least 7 days in culture and the microspheres containing cells were small enough to be injected, using 23 Gauge Hamilton syringes, into the brains of adult rats that had previously sustained cortical contusion injuries. When analysed 3 days later, the transplanted RGCs were positive for the stem cell/progenitor marker Nestin. These results demonstrate that this multifunctional scaffold can be used as a cellular and growth factor delivery vehicle for the use in developing cell transplantation therapies for traumatic brain injuries. Copyright © 2013 John Wiley & Sons, Ltd.

Vacuum-assisted fluid flow in microchannels to pattern substrates and cells.

Substrate and cell patterning are widely used techniques in cell biology to study cell-to-cell and cell-substrate interactions. Conventional patterning techniques work well only with simple shapes, small areas and selected bio-materials. This paper describes a method to distribute cell suspensions as well as substrate solutions into complex, long, closed (dead-end) polydimethylsiloxane (PDMS) microchannels using negative pressure. Our method builds upon a previous vacuum-assisted method used for micromolding (Jeon et al 1999 Adv. Mater 11 946) and successfully patterned collagen-I, fibronectin and Sal-1 substrates on glass and polystyrene surfaces, filling microchannels with lengths up to 120 mm and covering areas up to 13 × 10 mm(2). Vacuum-patterned substrates were subsequently used to culture mammalian PC12 and fibroblast cells and amphibian neurons. Cells were also patterned directly by injecting cell suspensions into microchannels using vacuum. Fibroblast and neuronal cells patterned using vacuum showed normal growth and minimal cell death indicating no adverse effects of vacuum on cells. Our method fills reversibly sealed PDMS microchannels. This enables the user to remove the PDMS microchannel cast and access the patterned biomaterial or cells for further experimental purposes. Overall, this is a straightforward technique that has broad applicability for cell biology.

Improvements in biomaterial matrices for neural precursor cell transplantation.

Progress is being made in developing neuroprotective strategies for traumatic brain injuries; however, there will never be a therapy that will fully preserve neurons that are injured from moderate to severe head injuries. Therefore, to restore neurological function, regenerative strategies will be required. Given the limited regenerative capacity of the resident neural precursors of the CNS, many investigators have evaluated the regenerative potential of transplanted precursors. Unfortunately, these precursors do not thrive when engrafted without a biomaterial scaffold. In this article we review the types of natural and synthetic materials that are being used in brain tissue engineering applications for traumatic brain injury and stroke. We also analyze modifications of the scaffolds including immobilizing drugs, growth factors and extracellular matrix molecules to improve CNS regeneration and functional recovery. We conclude with a discussion of some of the challenges that remain to be solved towards repairing and regenerating the brain.

Heparin crosslinked chitosan microspheres for the delivery of neural stem cells and growth factors for central nervous system repair.

An effective paradigm for transplanting large numbers of neural stem cells after central nervous system (CNS) injury has yet to be established. Biomaterial scaffolds have shown promise in cell transplantation and in regenerative medicine, but improved scaffolds are needed. In this study we designed and optimized multifunctional and biocompatible chitosan-based films and microspheres for the delivery of neural stem cells and growth factors for CNS injuries. The chitosan microspheres were fabricated by coaxial airflow techniques, with the sphere size controlled by varying the syringe needle gauge and the airflow rate. When applying a coaxial airflow at 30 standard cubic feet per hour, ∼300µm diameter spheres were reproducibly generated that were physically stable yet susceptible to enzymatic degradation. Heparin was covalently crosslinked to the chitosan scaffolds using genipin, which bound fibroblast growth factor-2 (FGF-2) with high affinity while retaining its biological activity. At 1µgml(-1) approximately 80% of the FGF-2 bound to the scaffold. A neural stem cell line, GFP+RG3.6 derived from embryonic rat cortex, was used to evaluate cytocompatibility, attachment and survival on the crosslinked chitosan-heparin complex surfaces. The MTT assay and microscopic analysis revealed that the scaffold containing tethered FGF-2 was superior in sustaining survival and growth of neural stem cells compared to standard culture conditions. Altogether, our results demonstrate that this multifunctional scaffold possesses good cytocompatibility and can be used as a growth factor delivery vehicle while supporting neural stem cell attachment and survival.

A multicellular 3D heterospheroid model of liver tumor and stromal cells in collagen gel for anti-cancer drug testing.

Two-dimensional (2D) monolayer cultures are the standard in vitro model for cancer research. However, they fail to recapitulate the three-dimensional (3D) environment and quickly lose their function. In this study, we developed a new 3D multicellular heterospheroid tumor model in a collagen hydrogel culture system that more closely mimics the in vivo tumor microenvironment for anti-cancer drug testing. Three aspects of cancer were chosen to be modeled based on their ability to resist anti-cancer drugs: 3D, multicellularity, and extracellular matrix (ECM) barrier. The hanging drop method and co-culture of liver carcinoma with stromal fibroblasts were used to form controlled and uniform heterospheroids. These heterospheroids were then encapsulated in collagen gel in order to create a 3D model of liver cancer that would act more similarly to in vivo ECM conditions. The 3D heterospheroid tumor model was tested with an anti-cancer drug to determine how each of the above aspects affects drug resistance. The results demonstrate that the 3D heterospheroid model is more resistant to drug over 2D monolayer and homospheroid cultures, indicating stromal fibroblasts and collagen hydrogel culture system provides more resistance to anti-cancer drug. This study will provide useful information toward the development of improved biomimetic tumor models in vitro for cancer research in pre-clinical drug development.

Functional 3-D cardiac co-culture model using bioactive chitosan nanofiber scaffolds.

The in vitro generation of a three-dimensional (3-D) myocardial tissue-like construct employing cells, biomaterials, and biomolecules is a promising strategy in cardiac tissue regeneration, drug testing, and tissue engineering applications. Despite significant progress in this field, current cardiac tissue models are not yet able to stably maintain functional characteristics of cardiomyocytes for long-term culture and therapeutic purposes. The objective of this study was to fabricate bioactive 3-D chitosan nanofiber scaffolds using an electrospinning technique and exploring its potential for long-term cardiac function in the 3-D co-culture model. Chitosan is a natural polysaccharide biomaterial that is biocompatible, biodegradable, non-toxic, and cost effective. Electrospun chitosan was utilized to provide structural scaffolding characterized by scale and architectural resemblance to the extracellular matrix (ECM) in vivo. The chitosan fibers were coated with fibronectin via adsorption in order to enhance cellular adhesion to the fibers and migration into the interfibrous milieu. Ventricular cardiomyocytes were harvested from neonatal rats and studied in various culture conditions (i.e., mono- and co-cultures) for their viability and function. Cellular morphology and functionality were examined using immunofluorescent staining for alpha-sarcomeric actin (SM-actin) and gap junction protein, Connexin-43 (Cx43). Scanning electron microscopy (SEM) and light microscopy were used to investigate cellular morphology, spatial organization, and contractions. Calcium indicator was used to monitor calcium ion flux of beating cardiomyocytes. The results demonstrate that the chitosan nanofibers retained their cylindrical morphology in long-term cell cultures and exhibited good cellular attachment and spreading in the presence of adhesion molecule, fibronectin. Cardiomyocyte mono-cultures resulted in loss of cardiomyocyte polarity and islands of non-coherent contractions. However, the cardiomyocyte-fibroblast co-cultures resulted in polarized cardiomyocyte morphology and retained their morphology and function for long-term culture. The Cx43 expression in the fibroblast co-culture was higher than the cardiomyocytes mono-culture and endothelial cells co-culture. In addition, fibroblast co-cultures demonstrated synchronized contractions involving large tissue-like cellular networks. To our knowledge, this is the first attempt to test chitosan nanofiber scaffolds as a 3-D cardiac co-culture model. Our results demonstrate that chitosan nanofibers can serve as a potential scaffold that can retain cardiac structure and function. These studies will provide useful information to develop a strategy that allows us to generate engineered 3-D cardiac tissue constructs using biocompatible and biodegradable chitosan nanofiber scaffolds for many tissue engineering applications.

Adhesive-tape soft lithography for patterning mammalian cells: application to wound-healing assays.

This paper introduces a benchtop method for patterning mammalian cells-i.e., for culturing cells at specific locations-on planar substrates. Compared with standard cell culture techniques, which do not allow the control of what areas of a monolayer are populated by one type of cell or another, techniques of cell patterning open new routes to cell biology. Researchers interested in cell patterning, however, are often times hindered by limited access to photolithographic capabilities. This paper shows how cells can be patterned easily with sub-millimeter precision using a non-photolithographic technique that is based on the use of office adhesive tape and poly(dimethylsiloxane) (PDMS). This method is fast (~4 h to go from a layout to have the cells patterned in the shape of such layout) and only requires materials and tools readily available in a conventional biomedical laboratory. A wound-healing assay is presented here that illustrates the potential of the technique (which we call tape-based soft lithography) for patterning mammalian cells and studying biologically significant questions such as collective cellular migration.

Layered patterning of hepatocytes in co-culture systems using microfabricated stencils.

Microfabrication and micropatterning techniques in tissue engineering offer great potential for creating and controlling microenvironments in which cell behavior can be observed. Here we present a novel approach to generate layered patterning of hepatocytes on micropatterned fibroblast feeder layers using microfabricated polydimethylsiloxane (PDMS) stencils. We fabricated PDMS stencils to pattern circular holes with diameters of 500 microm. Hepatocytes were co-cultured with 3T3-J2 fibroblasts in two types of patterns to evaluate and characterize the cellular interactions in the co-culture systems. Results of this study demonstrated uniform intracellular albumin staining and E-cadherin expression, increased liver-specific functions, and active glycogen synthesis in the hepatocytes when the heterotypic interface between hepatocytes and fibroblasts was increased by the layered patterning technique. This patterning technique can be a useful experimental tool for applications in basic science, drug screening, and tissue engineering, as well as in the design of bioartificial liver devices.

A new technique for primary hepatocyte expansion in vitro.

The current application for many potential cell-based treatments for liver failure is limited by the low availability of mature functional hepatocytes. Although adult hepatocytes have a remarkable ability to proliferate in vivo, attempts to proliferate adult hepatocytes in vitro have been less successful. In this study, we investigated the effect of coculture cell type on the proliferative response and the functional activities of hepatocytes. We show, for the first time, a robust proliferative response of primary adult rat hepatocytes when cocultured with mouse 3T3-J2 fibroblasts. Hepatocytes cultured at low density on growth-arrested 3T3-J2 fibroblast feeder layers underwent significantly higher proliferation rates than when cultured on feeder layers made of four other cell types. Increasing colony size correlated with an increase in hepatocellular functions. The proliferating hepatocytes retained their morphologic, phenotypic, and functional characteristics. Using a cell patterning technique, we found that 3T3-J2 fibroblasts stimulate DNA synthesis in hepatocytes by short-range heterotypic cell-cell interactions. When hepatocytes that proliferated in cocultures were harvested and further subcultured either on 3T3-J2 fibroblast feeders or in the collagen sandwich configuration, their behavior was similar to that of freshly isolated hepatocytes. We conclude that adult rat hepatocytes can proliferate in vitro in a coculture cell type-dependent manner, and can be serially propagated by coculturing with 3T3-J2 fibroblasts while maintaining their differentiated characteristics. Our results also suggest that one of the major reasons for the functional differences in hepatocyte cocultures may be due to the different proliferative responses of hepatocytes as a function of coculture cell type. This study provides new insights in the roles of coculture cell types and cell-cell interactions in the modulation of hepatic proliferation and function.

Mesenchymal stem cell-derived molecules directly modulate hepatocellular death and regeneration in vitro and in vivo.

UNLABELLED: Orthotopic liver transplantation is the only proven effective treatment for fulminant hepatic failure (FHF), but its use is limited because of organ donor shortage, associated high costs, and the requirement for lifelong immunosuppression. FHF is usually accompanied by massive hepatocellular death with compensatory liver regeneration that fails to meet the cellular losses. Therefore, therapy aimed at inhibiting cell death and stimulating endogenous repair pathways could offer major benefits in the treatment of FHF. Recent studies have demonstrated that mesenchymal stem cell (MSC) therapy can prevent parenchymal cell loss and promote tissue repair in models of myocardial infarction, acute kidney failure, and stroke through the action of trophic secreted molecules. In this study, we investigated whether MSC therapy can protect the acutely injured liver and stimulate regeneration. In a D-galactosamine-induced rat model of acute liver injury, we show that systemic infusion of MSC-conditioned medium (MSC-CM) provides a significant survival benefit and prevents the release of liver injury biomarkers. Furthermore, MSC-CM therapy resulted in a 90% reduction of apoptotic hepatocellular death and a three-fold increment in the number of proliferating hepatocytes. This was accompanied by a dramatic increase in the expression levels of 10 genes known to be up-regulated during hepatocyte replication. Direct antiapoptotic and promitotic effects of MSC-CM on hepatocytes were demonstrated using in vitro assays. CONCLUSION: These data provide the first clear evidence that MSC-CM therapy provides trophic support to the injured liver by inhibiting hepatocellular death and stimulating regeneration, potentially creating new avenues for the treatment of FHF.

Application of porous glycosaminoglycan-based scaffolds for expansion of human cord blood stem cells in perfusion culture.

In vitro expansion of hematopoietic stem cells (HSCs) has been employed to obtain sufficient numbers of stem cells for successful engraftment after HSC transplantation. A three-dimensional perfusion bioreactor system with a heparin-chitosan scaffold was designed and evaluated for its capability to support maintenance and expansion of HSCs. Porous chitosan scaffolds were fabricated by a freeze-drying technique and N-desulfated heparin was covalently immobilized within the scaffolds using carbodiimide chemistry. CD34+ HSCs isolated from umbilical cord blood by immunomagnetic separation were cultured within the porous scaffold in a perfusion bioreactor system. Control cultures were maintained on dishes coated with similar heparin-chitosan films. Oxygen uptake was measured during the culture period. After 7 days of culture, scaffolds were harvested for analysis. Cellular phenotype and HSC characteristics were evaluated via flow cytometry and colony forming unit assays. The results indicate good cell retention and proliferation within the perfused scaffolds. Oxygen consumption in the perfusion bioreactor system increased continuously during the culture, indicating steady cell growth. Cells from the perfused scaffold cultures showed higher percentages of primitive progenitors and exhibited superior colony forming unit performance as compared to cells from static cultures. In addition, perfusion culture at low oxygen (5%) enhanced the expansion of CD34+ cells and colony-forming activity compared to high oxygen (19%) cultures. The results suggest that perfusion culture of cord blood CD34+ cells under bone marrow-like conditions enhances HSC expansion compared to static cultures.

Homogeneous differentiation of hepatocyte-like cells from embryonic stem cells: applications for the treatment of liver failure.

One of the major hurdles of cellular therapies for the treatment of liver failure is the low availability of functional human hepatocytes. While embryonic stem (ES) cells represent a potential cell source for therapy, current methods for differentiation result in mixed cell populations or low yields of the cells of interest. Here we describe a rapid, direct differentiation method that yields a homogeneous population of endoderm-like cells with 95% purity. Mouse ES cells cultured on top of collagen-sandwiched hepatocytes differentiated and proliferated into a uniform and homogeneous cell population of endoderm-like cells. The endoderm-like cell population was positive for Foxa2, Sox17, and AFP and could be further differentiated into hepatocyte-like cells, demonstrating hepatic morphology, functionality, and gene and protein expression. Incorporating the hepatocyte-like cells into a bioartificial liver device to treat fulminant hepatic failure improved animal survival, thereby underscoring the therapeutic potential of these cells.

Activin alters the kinetics of endoderm induction in embryonic stem cells cultured on collagen gels.

Embryonic stem cell-derived endoderm is critical for the development of cellular therapies for the treatment of disease such as diabetes, liver cirrhosis, or pulmonary emphysema. Here, we describe a novel approach to induce endoderm from mouse embryonic stem (mES) cells using fibronectin-coated collagen gels. This technique results in a homogeneous endoderm-like cell population, demonstrating endoderm-specific gene and protein expression, which remains committed following in vivo transplantation. In this system, activin, normally an endoderm inducer, caused an 80% decrease in the Foxa2-positive endoderm fraction, whereas follistatin increased the Foxa2-positive endoderm fraction to 78%. Our work suggests that activin delays the induction of endoderm through its transient precursors, the epiblast and mesendoderm. Long-term differentiation displays a twofold reduction in hepatic gene expression and threefold reduction in hepatic protein expression of activin-treated cells compared with follistatin-treated cells. Moreover, subcutaneous transplantation of activin-treated cells in a syngeneic mouse generated a heterogeneous teratoma-like mass, suggesting that these were a more primitive population. In contrast, follistatin-treated cells resulted in an encapsulated epithelial-like mass, suggesting that these cells remained committed to the endoderm lineage. In conclusion, we demonstrate a novel technique to induce the direct differentiation of endoderm from mES cells without cell sorting. In addition, our work suggests a new role for activin in induction of the precursors to endoderm and a new endoderm-enrichment technique using follistatin.

Microfabrication-based modulation of embryonic stem cell differentiation.

Embryonic stem (ES) cells form spontaneous aggregates during differentiation, and cell-cell communication in the aggregates plays an important role in differentiation. The development of a controlled differentiation scheme for ES cells has been hindered by the lack of a reliable method to produce uniform aggregate sizes. Conventional techniques, such as hanging drop and suspension cultures, do not allow precise control over size of ES cell aggregates. To surmount this problem, we microfabricated adhesive stencils to make mouse ES (mES) cell aggregates of specific sizes ranging from 100 microm to 500 microm in diameter. With this technique, we studied the effect of the initial aggregate size on ES cell differentiation. After 20 days of induction of differentiation, we analyzed the stem cell populations using gene and protein expression assays as well as biochemical functions. Notably, we found that germ layer differentiation depends on the initial size of the ES cell aggregate. Among the ES cell aggregate sizes tested, the aggregates with 300 microm diameter showed similar differentiation profiles of three germ layers as embryoid bodies made using the "hanging drop" technique. The smaller (100 microm) aggregates showed the increased expression of ectodermal markers compared to the larger (500 microm) aggregates, while the 500 microm aggregates showed the increased expression of mesodermal and endodermal markers compared to the 100 microm aggregates. These results indicate that the initial size of the aggregate is an important factor for ES cell differentiation, and can affect germ layer selection as well as the extent of differentiation.

Oxygen uptake rates and liver-specific functions of hepatocyte and 3T3 fibroblast co-cultures.

Bioartificial liver (BAL) devices have been developed to treat patients undergoing acute liver failure. One of the most important parameters to consider in designing these devices is the oxygen consumption rate of the seeded hepatocytes which are known to have oxygen consumption rates 10 times higher than most other cell types. Hepatocytes in various culture configurations have been tested in BAL devices including those formats that involve co-culture of hepatocytes with other cell types. In this study, we investigated, for the first time, oxygen uptake rates (OUR)s of hepatocytes co-cultured with 3T3-J2 fibroblasts at various hepatocyte to fibroblast seeding ratios. OURs were determined by measuring the rate of oxygen disappearance using a ruthenium-coated optical probe after closing and sealing the culture dish. Albumin and urea production rates were measured to assess hepatocyte function. Lower hepatocyte density co-cultures demonstrated significantly higher OURs (2 to 3.5-fold) and liver- specific functions (1.6-fold for albumin and 4.5-fold for urea production) on a per cell basis than those seeded at higher densities. Increases in OUR correlated well with increased liver-specific functions. OURs (V(m)) were modeled by fitting Michaelis-Menten kinetics and the model predictions closely correlated with the experimental data. This study provides useful information for predicting BAL design parameters that will avoid oxygen limitations, as well as maximize metabolic functions.