The activin/BMP-2 chimera AB204 promotes periodontal tissue regeneration in a buccal dehiscence model: a pilot study.

PURPOSE: A combination of activin and bone morphogenetic protein-2 (BMP-2), termed AB204, has been shown to improve osteogenic potential with fewer side effects than BMP-2 alone. This study was performed to evaluate the effect of AB204 on periodontal tissue regeneration in a dog buccal dehiscence model. METHODS: Buccal dehiscence defects were created on the maxillary premolars (P1, P2, and P3) of 6 mongrel dogs. After 5 weeks, the dogs were randomly assigned to 1 of 3 groups: the control, collagen matrix (CM), and CM/AB204 groups. Grafting procedures were then performed. The dogs were sacrificed 8 weeks after the grafting procedure, and volumetric and histological analyses were conducted. RESULTS: The thickness of the buccal gingiva in the CM/AB204 group was greater than those in the other groups at 2 weeks (P<0.05). The ridge width in the AB204/CM group exceeded the width in the other groups at 4 and 8 weeks; however, the difference was not statistically significant. Histological analysis revealed that the CM/AB204 group demonstrated the formation of new bone surrounded by newly formed periodontal ligament and cementum (P=0.035). CONCLUSIONS: The combined application of CM and AB204 shows promise in facilitating the regeneration of periodontal attachment, including the formation of new bone, cementum, and periodontal ligament.

Bone regeneration using activin A/BMP2 chimera (AB204) with collagen membrane in rats with calvarial defects.

PURPOSE: Collagen has long been recognized as an excellent carrier for growth factors, and membrane-type collagen has been widely applied in dentistry for guided bone regeneration. This study was conducted to examine the effects of an activin A/BMP2 chimera (AB204) combined with a collagen membrane (CM) on bone repair in a rat calvarial defect model. METHODS: A unilateral calvarial defect measuring 5.0 mm was surgically created in 32 Sprague-Dawley rats. The rats were then randomly assigned to 1 of 4 groups, each consisting of 8 animals: control (untreated), CM (treated with a CM only), CM/bone morphogenetic protein 2 (BMP2) (treated with a CM and 1.0 µg of BMP2), and CM/AB204 (treated with a CM and 1.0 µg of AB204). Bone regeneration was evaluated using micro-computed tomography (CT) and histological analysis at 2 and 4 weeks following surgery. RESULTS: Micro-CT analysis revealed that bone formation in the CM/BMP2 and CM/AB204 groups was superior to that observed in the control and CM groups at both 2 and 4 weeks postoperatively. BMP2 induced greater bone regeneration than AB204 at 2 weeks; however, AB204 resulted in a greater bone volume at 4 weeks, achieving the highest values recorded. No significant differences were found between the CM/BMP2 and CM/AB204 groups at either time point (P>0.05). On histological examination, new bone formation was evident in both CM/BMP2 and CM/AB204 groups. CONCLUSIONS: Within the limitations of this study, the findings indicate that AB204 may enhance osteogenic potential when used in combination with CM for bone regeneration.

Effectiveness of a collagen matrix seal and xenograft in alveolar ridge preservation: an experimental study in dogs.

Majority of previous studies on alveolar ridge preservation (ARP) used collagen membranes as barrier membranes, and further evidence for ARP in dehiscent extraction sockets with a deproteinized bovine bone mineral (DBBM) and matrix is needed. The aim of this study is to assess the impact of non-cross linked collagen membranes (membrane) and crosslinked collagen matrices (matrix) on ARP using DBBM in extraction sockets with buccal dehiscence. In six mongrel dogs, the mesial roots of three mandibular premolars (P2, P3, and P4) were extracted 1 month after dehiscence defect induction. Two experimental groups were randomly assigned: (1) DBBM with a membrane (DBBM/membrane group) and (2) DBBM with a matrix (DBBM/matrix group). Three-dimensional (3D) volumetric, microcomputed tomography (µCT), and histologic analyses were performed to assess the ridge preservation. Both groups were effective to maintain the ridge width (p > 0.05), and the DBBM/matrix group showed more favorable soft tissue regeneration and bone quality in the histological analysis (p = 0.05). Based on these results, DBBM/matrix could be better choice for ARP in cases of buccal dehiscence defects.

Clinical evaluation of 3.0-mm narrow-diameter implants: a retrospective study with up to 5 years of observation.

PURPOSE: This study aimed to evaluate the clinical outcomes of a single type of narrow-diameter implant (NDI) by investigating its survival rate and peri-implant marginal bone loss (MBL). In addition, variables possibly related to implant survival and MBL were investigated to identify potential risk factors. METHODS: The study was conducted as a retrospective study involving 49 patients who had received 3.0-mm diameter TSIII implants (Osstem Implant Co.) at Seoul National University Dental Hospital. In total, 64 implants were included, and dental records and radiographic data were collected from 2017 to 2022. Kaplan-Meier survival curves and a Cox proportional hazard model were used to estimate the implant survival rate and to investigate the effects of age, sex, jaw, implant location, implant length, the stage of surgery, guided bone regeneration, type of implant placement, and the surgeon's proficiency (resident or professor) on implant survival. The MBL of the NDIs was measured, and the factors influencing MBL were evaluated. RESULTS: The mean observation period was 30.5 months (interquartile range, 26.75-45 months), and 6 out of 64 implants failed. The survival rate of the NDIs was 90.6%, and the multivariate Cox regression analysis showed that age was associated with implant failure (hazard ratio, 1.17; 95% confidence interval, 1.04-1.31, P=0.01). The mean MBL was 0.44±0.75 mm, and no factors showed statistically significant associations with greater MBL. CONCLUSIONS: NDIs can be considered a primary alternative when standard-diameter implants are unsuitable. However, further studies are required to confirm their long-term stability.

The cumulative survival rate of dental implants with micro-threads: a long-term retrospective study.

PURPOSE: This study aimed to evaluate the long-term cumulative survival rate (CSR) of dental implants with micro-threads in the neck over a 10-year follow-up period and to examine the factors influencing the survival rate of dental implants. METHODS: This retrospective study was based on radiographic and dental records. In total, 151 patients received 490 Oneplant® dental implants with an implant neck micro-thread design during 2006-2010 in the Department of Periodontology of Seoul National University Dental Hospital. Implant survival was evaluated using Kaplan-Meier analysis. Cox proportional hazard regression analysis was used to identify the factors influencing implant failure. RESULTS: Ten out of 490 implants (2.04%) failed due to fixture fracture. The CSR of the implants was 97.9%, and no significant difference was observed in the CSR between external- and internal-implant types (98.2% and 97.6%, respectively, P=0.670). In Cox regression analysis, 2-stage surgery significantly increased the risk of implant failure (hazard ratio: 4.769, P=0.039). There were no significant differences in influencing factors, including sex, age, implant diameter, length, fixture type, location, surgical procedure, bone grafting, and restoration type. CONCLUSIONS: Within the limitations of this retrospective study, the micro-thread design of the implant neck was found to be favorable for implant survival, with stable clinical outcomes.

Effects of adjacent periodontitis on osseointegrated dental implants.

PURPOSE: This study aimed to investigate whether new-onset periodontitis or apical periodontitis in the adjacent teeth affects osseointegrated dental implants in a beagle dog model. METHODS: One control group and 2 experimental groups (periodontitis and apical periodontitis groups) were defined based on the presence of experimental periodontitis or apical periodontitis, with 1 beagle dog randomly assigned to each group. The mandibular second and fourth premolars on both sides of the 3 beagles were extracted. Eight weeks after extraction, 4 bone-level implant fixtures, 2 on both sides of each mandible, were placed in each beagle. Six weeks after implant surgery, healing abutments were connected. After sufficient osseointegration, plaque control was performed in the control group, while periodontitis and apical periodontitis were induced in the experimental groups. The beagles were euthanized for histological analyses 20 weeks after induction of experimental periodontitis. Statistical analyses were performed using the Kruskal-Wallis test with the Bonferroni correction to compare the 3 groups. RESULTS: The implants in the control and apical periodontitis groups were well-maintained, while those in the periodontitis group showed clinical signs of inflammation with bone resorption. The bone-to-implant contact (BIC) and bone area values in the periodontitis group were lower than those in the other groups. The distance between the implant shoulder and the first BIC was significantly greater in the periodontitis group than in the control group (P<0.05). CONCLUSIONS: The presence of periodontitis in adjacent teeth can pose a risk to dental implants, potentially resulting in peri-implantitis. However, this was not observed for apical periodontitis. Within the limitations of this study, periodontal care is necessary to reduce the impact of periodontitis in adjacent teeth on osseointegrated implants.

Foci-Xpress: Automated and Fast Nuclear Foci Counting Tool.

In the nucleus, distinct, discrete spots or regions called "foci" have been identified, each harboring a specific molecular function. Accurate and efficient quantification of these foci is essential for understanding cellular dynamics and signaling pathways. In this study, we present an innovative automated image analysis method designed to precisely quantify subcellular foci within the cell nucleus. Manual foci counting methods can be tedious and time-consuming. To address these challenges, we developed an open-source software that automatically counts the number of foci from the indicated image files. We compared the foci counting efficiency, velocity, accuracy, and convenience of Foci-Xpress with those of other conventional methods in foci-induced models. We can adjust the brightness of foci to establish a threshold. The Foci-Xpress method was significantly faster than other conventional methods. Its accuracy was similar to that of conventional methods. The most significant strength of Foci-Xpress is automation, which eliminates the need for analyzing equipment while counting. This enhanced throughput facilitates comprehensive statistical analyses and supports robust conclusions from experiments. Furthermore, automation completely rules out biases caused by researchers, such as manual errors or daily variations. Thus, Foci-Xpress is a convincing, convenient, and easily accessible focus-counting tool for cell biologists.

Evaluation of alveolar ridge preservation in sockets with buccal dehiscence defects using two types of xenogeneic biomaterials: An in vivo experimental study.

OBJECTIVES: Alveolar ridge preservation (ARP) has been extensively investigated in various preclinical and clinical studies, yielding favorable results. We aim to evaluate the effects of ARP using collagenated bovine bone mineral (CBBM) alone or particulated bovine bone mineral with a non-cross-linked collagen membrane (PBBM/NCLM) in tooth extraction sockets with buccal dehiscence in an experimental dog model. MATERIALS AND METHODS: The mesial roots of three mandibular premolars (P2, P3, and P4) were extracted from six mongrel dogs 4 weeks after inducing dehiscence defects. ARP was randomly performed using two different protocols: 1) CBBM alone and 2) PBBM/NCLM. Three-dimensional (3D) volumetric, micro-computed tomography, and histological analyses were employed to determine changes over a span of 20 weeks. RESULTS: In 3D volumetric and radiographic analyses, CBBM alone demonstrated similar effectiveness to PBBM/NCLM in ARP (p > .05). However, in the PBBM/NCLM group (3.05 ± 0.60 mm), the horizontal ridge width was well maintained 3 mm below the alveolar crest compared with the CBBM group (2.11 ± 1.01 mm, p = .002). CONCLUSION: Although the radiographic changes in the quality and quantity of bone were not significant between the two groups, the use of PBBM/NCLM resulted in greater horizontal dimensions and more favorable maintenance of the ridge profile.

The cumulative survival rate of sandblasted, large-grit, acid-etched dental implants: a retrospective analysis.

PURPOSE: This retrospective study aimed to assess the long-term cumulative survival rate of titanium, sandblasted, large-grit, acid-etched implants over a 10-year follow-up period and investigate the factors affecting the survival rate and change in marginal bone loss (MBL). METHODS: The study included 400 patients who underwent dental implant placement at the Department of Periodontology of Seoul National University Dental Hospital (SNUDH) between 2005 and 2015. Panoramic radiographic images and dental records of patients were collected and examined using Kaplan-Meier analysis, Cox proportional hazards regression analysis, and multiple regression analysis to determine the survival rates and identify any factors related to implant failure and MBL. RESULTS: A total of 782 implants were placed with a follow-up period ranging from 0 to 16 years (mean: 8.21±3.75 years). Overall, 25 implants were lost, resulting in a cumulative survival rate of 96.8%. Comparisons of the research variables regarding cumulative survival rate mostly yielded insignificant results. The mean mesial and distal MBLs were 1.85±2.31 mm and 1.59±2.03 mm, respectively. Factors influencing these values included age, diabetes mellitus (DM), jaw location, implant diameter, bone augmentation surgery, and prosthetic unit. CONCLUSIONS: This study found that the implant survival rates at SNUDH fell within the acceptable published criteria. The patients' sex, age, DM status, implant location, implant design, implant size, surgical type, bone augmentation, and prosthetic unit had no discernible influence on long-term implant survival. Sandblasted, large-grit, acid-etched implants might offer advantages in terms of implant longevity and consistent clinical outcomes.

Effect of a multichannel oral irrigator on periodontal health and the oral microbiome.

Oral biofilms or dental plaques are one of the major etiological factors for diverse oral diseases. We aimed to evaluate the effect of a multichannel oral irrigator (MCOI) on periodontal health in 29 participants randomly divided into two groups: the MCOI group and the control group. To evaluate the effect of the MCOI on periodontal health, the modified Quigley Hein Plaque Index (PI), Mühlemann-Son Sulcus Bleeding Index (SBI), bleeding on probing (BOP), and swelling were evaluated and compared before and after MCOI use for 3 days. Although PI and SBI showed statistically significant increases in the control group, the MCOI group showed no significant changes in either parameter. Moreover, the percentage of BOP was significantly lower in the MCOI group. Saliva samples were analyzed by 16s rRNA amplicon sequencing to investigate changes in the oral microbiome. Sequencing results showed that Porphyromonas spp. were significantly increased in the control group, whereas no significant change was detected in the MCOI group. Using the MCOI, enriched populations and functional pathways were detected in pioneer species comprising non-mutans streptococci. These findings provide evidence of the effectiveness of the MCOI in maintaining periodontal health and a healthy microbial ecology in the oral cavity.

Nicotinamide enhances osteoblast differentiation through activation of the mitochondrial antioxidant defense system.

Although the normal physiological level of oxidative stress is beneficial for maintaining bone homeostasis, imbalance between reactive oxygen species (ROS) production and antioxidant defense can cause various bone diseases. The purpose of this study was to determine whether nicotinamide (NAM), an NAD+ precursor, can support the maintenance of bone homeostasis by regulating osteoblasts. Here, we found that NAM enhances osteoblast differentiation and mitochondrial metabolism. NAM increases the expression of antioxidant enzymes, which is due to increased FOXO3A transcriptional activity via SIRT3 activation. NAM has not only a preventive effect against weak and chronic oxidative stress but also a therapeutic effect against strong and acute exposure to H2O2 in osteoblast differentiation. Collectively, the results indicate that NAM increases mitochondrial biogenesis and antioxidant enzyme expression through activation of the SIRT3-FOXO3A axis, which consequently enhances osteoblast differentiation. These results suggest that NAM could be a potential preventive or therapeutic agent for bone diseases caused by ROS.

Gingival biotype modification with collagen matrix or autogenous subepithelial connective tissue graft: Histologic and volumetric analyses in a beagle model.

Objectives: To evaluate the volumetric effect and biocompatibility of porcine tendon-derived type I collagen matrix graft (CG) in gingival biotype modification (GBM) compared with subepithelial connective tissue graft (SCTG) in a beagle model. Methods: Surface analysis using scanning electron microscopy and a collagen degradation assay of CG was performed in vitro. Six adult dogs were used in in vivo experiment, and each received autologous SCTG or CG at the anterior side. Histometric and three-dimensional digital volume analyses were conducted to compare quantitative changes in CG and SCTG in GBM. Immunohistochemical analysis was performed for the qualitative evaluation of CG compared to SCTG. Results: CG had a double-layered structure, and its degradation was slower than that of other well-reported materials. No critical problems were associated with the healing procedure. Changes in gingival thickness and volume in the CG and SCTG groups were equivalent, with no significant differences between the groups. Type I collagen and vascular endothelial growth factor expression levels were similar in both groups. Significance: CG and SCTG had equivalent potential for GBM in terms of quantity and quality. Additionally, CG could be used as a reasonable substitute for SCTG, making surgery convenient and predicting successful clinical outcomes.

A retrospective study of the long-term survival of RESTORE® dental implants with resorbable blast media surface.

PURPOSE: The aim of this study was to retrospectively evaluate the survival and failure rates of RESTORE® implants over a follow-up period of 10-15 years at a university dental hospital and to investigate the factors affecting the survival rate of these dental implants. METHODS: A total of 247 RESTORE® dental implants with a resorbable blast media (RBM) surface inserted in 86 patients between March 2006 and April 2011 at the Department of Periodontology of Seoul National University Dental Hospital were included. Patients with follow-up periods of less than 10 years were excluded, and data analysis was conducted based on dental records and radiographs. RESULTS: Over a 10- to 15-year period, the cumulative survival rate of the implants was 92.5%. Seventeen implants (6.88%) were explanted due to implant fracture (n=10, 4.05%), peri-implantitis (n=6, 2.43%), and screw fracture (n=1, 0.4%). The results of univariate regression analysis using a Cox proportional hazards model demonstrated that implants placed in male patients (hazard ratio [HR], 4.542; 95% confidence interval [CI], 1.305-15.807; P=0.017) and implants that supported removable prostheses (HR, 15.498; 95% CI, 3.105-77.357; P=0.001) showed statistically significant associations with implant failure. CONCLUSIONS: Within the limitations of this retrospective study, the RESTORE® dental implant with an RBM surface has a favorable survival rate with stable clinical outcomes.

Standard operating procedures for the collection, processing, and storage of oral biospecimens at the Korea Oral Biobank Network.

PURPOSE: The Korea Oral Biobank Network (KOBN) was established in 2021 as a branch of the Korea Biobank Network under the Korea Centers for Disease Control and Prevention to provide infrastructure for the collection, management, storage, and utilization of human bioresources from the oral cavity and associated clinical data for basic research and clinical studies. METHODS: To address the need for the unification of the biobanking process, the KOBN organized the concept review for all the processes. RESULTS: The KOBN established standard operating procedures for the collection, processing, and storage of oral samples. CONCLUSIONS: The importance of collecting high-quality bioresources to generate accurate and reproducible research results has always been emphasized. A standardized procedure is a basic prerequisite for implementing comprehensive quality management of biological resources and accurate data production.

Improvement of halitosis by probiotic bacterium Weissella cibaria CMU: A randomized controlled trial.

Several in vitro and in vivo studies have evaluated the effect of probiotics on oral health; however, human clinical studies are still limited. Therefore, this study aimed to examine the effects of Weissella cibaria Chonnam Medical University (CMU)-containing tablets on halitosis. This randomized, double-blinded, placebo-controlled study included 100 adults with halitosis (age, 20-70 years). The participants were randomly assigned to the test group (n = 50) and control group (n = 50). One tablet [1 × 108 colony forming units (CFU)/tablet] was to be taken each day over 8 weeks. The concentrations of volatile sulfur compounds (VSCs), bad breath improvement scores, and oral colonization of W. cibaria were measured. Psychosocial indicators including depression, self-esteem, oral health-related quality of life, and subjective oral health status were evaluated. Most variables were assessed at baseline, 4, and 8 weeks, and W. cibaria number and safety variables were assessed at baseline and 8 weeks. Intergroup comparisons were carried out using Student's t-test, Chi-square test, or Fisher's exact test on per-protocol analysis. Intragroup differences before and after intake were analyzed using the linear mixed-effect model (LMM). Per-protocol analysis was carried out in the test group (n = 45) and control group (n = 46). Total VSC was significantly lower in the probiotics group than in the placebo group at baseline (week 0, p = 0.046) and at 8 weeks (p = 0.017). The sum of hydrogen sulfide and methyl mercaptan did not differ significantly between the groups at baseline; however, it was significantly lower in the probiotics group than in the placebo group at week 8 (p = 0.012). Bad breath improvement (BBI) scores were significantly reduced at week 8 (p = 0.006) in the probiotics group. Statistically significant intergroup differences were observed for changes in the level of W. cibaria at week 8 (p < 0.001). Psychological indicators significantly improved from baseline to week 8 in the probiotics group. No safety issues were observed in either group. The levels of W. cibaria was higher in patients with halitosis using W. cibaria CMU-containing tablets. The subjective degree of bad breath and psychological indicators were improved in patients with halitosis using W. cibaria CMU-containing tablets.

The optimal dosage of hyaluronic acid for bone regeneration in rat calvarial defects.

PURPOSE: Hyaluronic acid (HA) affects angiogenesis and promotes the migration and differentiation of mesenchymal cells, thereby activating the osteogenic ability of osteoblasts. Although studies on the action of HA during bone regeneration are being actively conducted, the optimal dose of HA required for bone regeneration remains unclear. Therefore, the purpose of this study was to elucidate the most effective HA dose for bone formation using a rat critical-size defect model. METHODS: Thirty rats were randomly divided into 5 groups, with 6 rats in each group. An absorbable collagen sponge soaked with HA or saline was used to fill an 8-mm defect, which was then covered with a collagen membrane. Different treatments were performed for each group as follows: (1) saline control, (2) 1 mg/mL HA, (3) 25 mg/mL HA, (4) 50 mg/mL HA, or (5) 75 mg/mL HA. After a healing period of 4 weeks, micro-computed tomography and histological analysis were performed. The obtained values were analyzed using analysis of variance and the Tukey test (P<0.05). RESULTS: At week 4, the 75 mg/mL HA group had the highest bone volume/total volume ratio, new bone, and bone fill among the 5 groups, and these values were significantly different from those observed in the control group (P<0.01) and 1 mg/mL HA group (P<0.001). More active bone formation was observed in the higher-dose HA groups (25 mg/mL, 50 mg/mL, and 75 mg/mL HA), which included a large amount of woven bone. CONCLUSIONS: The 75 mg/mL HA group showed better bone formation than the other groups (1, 25, and 50 mg/mL HA and control).

Dental-derived cells for regenerative medicine: stem cells, cell reprogramming, and transdifferentiation.

Embryonic stem cells have been a popular research topic in regenerative medicine owing to their pluripotency and applicability. However, due to the difficulty in harvesting them and their low yield efficiency, advanced cell reprogramming technology has been introduced as an alternative. Dental stem cells have entered the spotlight due to their regenerative potential and their ability to be obtained from biological waste generated after dental treatment. Cell reprogramming, a process of reverting mature somatic cells into stem cells, and transdifferentiation, a direct conversion between different cell types without induction of a pluripotent state, have helped overcome the shortcomings of stem cells and raised interest in their regenerative potential. Furthermore, the potential of these cells to return to their original cell types due to their epigenetic memory has reinforced the need to control the epigenetic background for successful management of cellular differentiation. Herein, we discuss all available sources of dental stem cells, the procedures used to obtain these cells, and their ability to differentiate into the desired cells. We also introduce the concepts of cell reprogramming and transdifferentiation in terms of genetics and epigenetics, including DNA methylation, histone modification, and non-coding RNA. Finally, we discuss a novel therapeutic avenue for using dental-derived cells as stem cells, and explain cell reprogramming and transdifferentiation, which are used in regenerative medicine and tissue engineering.

BMP Gene-Immobilization to Dental Implants Enhances Bone Regeneration.

For individuals who have experienced tooth loss, dental implants are an important treatment option for oral reconstruction. For these patients, alveolar bone augmentation and acceleration of osseointegration optimize implant stability. Traditional oral surgery often requires invasive procedures, which can result in prolonged treatment time and associated morbidity. It has been previously shown that chemical vapor deposition (CVD) polymerization of functionalized [2.2]paracyclophanes can be used to anchor gene encoding vectors onto biomaterial surfaces and local delivery of a bone morphogenetic protein (BMP)-encoding vector can increase alveolar bone volume and density in vivo. This study is the first to combine the use of CVD technology and BMP gene delivery on titanium for the promotion of bone regeneration and bone to implant contact in vivo. BMP-7 tethered to titanium surface enhances osteoblast cell differentiation and alkaline phosphatase activity in vitro and increases alveolar bone regeneration and % bone to implant contact similar to using high doses of exogenously applied BMP-7 in vivo. The use of this innovative gene delivery strategy on implant surfaces offers an alternative treatment option for targeted alveolar bone reconstruction.

The worldwide patent landscape of dental implant technology.

In an aging society, quality of life improvement is emerging as an important issue, and as implants are accepted as the core of oral rehabilitation treatment, competition for leadership in developing related technologies is intensifying. In this trend, unlike what is evident in the literature, the patent landscape shows the status of industrial-based technology development. A database analysis of a total of 32,237 dental implant patents shows improvements in technology, diverse geographical characteristics, and new advances toward technological convergence in this field. Technologically, dental implant technology has shown a tendency to develop from conventional implant materials and surface treatment technologies to new material technologies making use of substances such as pure zirconium and tantalum or software technologies related to diagnosis and prognosis. Regionally, dental implant technology, which was developed mainly in Europe and the Unites States in the past, is growing explosively in East Asian countries accompanied by the recent growth of the Asian market. In summary, dental implant technology seems to be developing while trying to converge with various technological areas based on the local market environment. Therefore, it is necessary to develop a new dental implant material technology that is highly applicable to the development of hybrid information/communication technology and is suitable for a new manufacturing method. Our study may provide important information to help basic and translational researchers and their financial supporters set their research directions in advancing the development of dental implants.

Dental implant proximity to adjacent teeth: A retrospective study.

BACKGROUND AND PURPOSE: The purpose of this study was to assess the occurrence and prognosis of dental implant proximity or direct contact with the adjacent tooth and to evaluate the symptoms and complications in both the implant and the adjacent tooth. We then elaborate on treatment modalities and discuss the prevention of this phenomenon. MATERIALS AND METHODS: This retrospective study was conducted based on the dental clinical and radiographic records of 43 patients with implant-tooth proximity of <1.0 mm or direct implant-tooth contact. Multivariate Bayesian logistic regression was performed to examine the influence of individual variables on correcting major clinical variables. RESULTS: In the multivariate regression analysis, the rate of occurrence of tooth symptom decreased by about 95% with every increase of 1.0 mm distance between implant and tooth (odds ratio [OR] = 0.1, 95% confidence interval [CI]: 0.004-0.680, p = 0.024). In the case of implant-tooth root proximity in the anterior area, the OR of peri-implantitis occurrence was 30.4-fold greater than in posterior sites (OR = 30.4, 95% CI: 1.189-785.914, p = 0.040). CONCLUSION: Implant-tooth root proximity or direct implant-tooth contact is an iatrogenic factor that causes various complications, including devitalization of the adjacent tooth and peri-implantitis. Proactive prevention with surgical stents and intra-operative periapical radiographs is needed. If proximity or contact is found during surgery, repositioning of the fixture to the correct location is recommended in order to maintain peri-implant health and prevent complications.