Human health-risk assessment based on chronic exposure to the carbonyl compounds and metals emitted by burning incense at temples.

Health effects resulting from the smoke of carbonyl compounds (aldehydes and ketones) and metal-containing incense particles at temples during incense burning periods were evaluated at temple A (without incense reduction activities) and B (with incense reduction activities), Nantou County, in 2018. The predominant size fractions of particles were PM1, PM1-2.5, and PM2.5-10 at both temples. The total particle mass at temple A was approximately 1.1 times that of temple B due to incense reduction at temple B. The most abundant metal elements in all particle size fractions at both temples were Fe, Al, and Zn. Metal species of incense smoke are divided into three groups by hierarchical cluster analysis and heatmaps, showing higher metal contents in groups PM1, PM18-10, and PM18-2.5 at temple A. In contrast, higher metal contents were observed in PM18-10 and PM2.5-1 at temple B. Most of the carbonyl species were formaldehyde and acetaldehyde, released during incense burning periods, with concentrations ranging from 6.20 to 13.05 µg/m3 at both temples. The total deposited fluxes of particle-bound metals at temples A and B were determined to be 83.00% and 84.82% using the International Commission on Radiological Protection (ICRP) model. Health-risk assessments revealed that the risk values of metals and carbonyls were above recommended guidelines (10-6) at temple A. Since worshippers and staff are exposed to incense burning environments with poor ventilation over a long period, these toxic organic compounds and metals increase health risks in the respiratory tract. Therefore, incense reduction is important to achieve healthy temple environments.

Comparative health risk of inhaled exposure to organic solvents, toxic metals, and hexavalent chromium from the use of spray paints in Taiwan.

The study investigated the exposure of spray painters to organic solvents, toxic metals, and hexavalent chromium over 21 working days in 2017. The results found these concentrations of 12 VOCs to be below the short-term exposure limit (STEL) established by the US Occupational Safety and Health Administration (OSHA). The mass concentration of total particulate matter (PM) exposure to workers was 20.01 ± 10.78 mg/m3, which exceeds OSHA's permissible exposure level of 15 mg/m3. The mean concentration of the total metals for all particle sizes was 109.1 ± 12.0 µg/m3, and those for lead (496,017.0 ng/m3) and iron (252,123.8 ng/m3) were the highest of metal elements. Significantly, the mean concentrations of Pb and As exceeded OSHA's permissible exposure limits (PELs) of 0.05 and 0.01 mg/m3, respectively. The total hexavalent chromium concentration was 1163.01 ng/m3, and the individual particle sizes (PM1-2.5, PM1, and PM0.25) were strongly and positively correlated with the Cr(VI) concentrations for PM2.5. The study determined that approximately 56.14% of the hexavalent chromium inhaled during the spray-painting process was deposited in the upper respiratory system of the head airway region, followed by the alveolar and tracheobronchial regions, with fractions of 11.93 and 0.05%, respectively. Although the mean ratio of hexavalent chromium to total chromium was only 3.6% for all particle sizes, the cancer risk of the total particles in Cr(VI) (1.6 × 10-3) exceeded the acceptable risk value (10-6). The cancer risks of As and Cr(VI) associated with quasi-ultrafine particles, PM0.5-1, PM1-2.5, and PM> 2.5, also exceeded 10-6. Comparison of the carcinogenicity risk of VOCs and metals suggests that the adverse health effect of inhaled particles on spray-painting workers is more serious than that from VOC exposure.

Effects of heavy metals on health risk and characteristic in surrounding atmosphere of tire manufacturing plant, Taiwan.

The health and environmental effects of metal-containing carbon black (CB) particles emitted from a CB feeding area near a tire manufacturing plant were investigated. The mass ratios of PM1 and PM0.1 (UFPs) relative to TSP were 13.84% ± 4.88% and 50.84% ± 4.29%, respectively. The most abundant elements in all fractions were Fe, Al, and Zn. The mean percentage contributions of Al, Fe, Zn, Cu, and Co to the coarse particles ranged from 49.1% to 69.1%, thus indicating that the Al, Fe, and Zn contents in the CB particles were affected by workplace emissions. The ratios of the total mean deposition fluxes of atmospheric particle-bound heavy metals in the human respiratory tracts of workers/adults, workers/children, and adults/children were approximately 5.5, 11.0, and 2.0, respectively. The integrated risks of five elements via two exposure pathways to adults and children were 1.1 × 10-4 and 1.7 × 10-5, respectively; these numbers reflect the high cumulative carcinogenic risk posed by these toxic metals to local residents (both adults and children; limit, 10-6). These results demonstrate the potential health risk presented by particle-bound heavy metals to humans residing near tire manufacturing plants via inhalation and dermal contact exposure.

Characteristics of particle-bound polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in atmosphere used in carbon black feeding process at a tire manufacturing plant.

Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were estimated for different particle size distributions in a carbon black feeding process at a tire manufacturing plant on 15 days in March and April of 2014. A total of 75 integrated air samples were collected using a micro-orifice uniform deposition impactor (MOUDI). Particle-bound PCDD/Fs were analyzed using a high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS). Concentrations of thoracic particles and total particles produced in the carbon black feeding process of a tire manufacturing plant were measured in ranges of 0.19-2.61 and 0.28-4.22 mg/m(3), respectively. On all sampling days, the three most abundant species of PCDD/Fs were OCDD, 1,2,3,4,6,7,8-HpCDF, and OCDF. The mean concentrations of total PCDD/Fs were 0.74-6.83 pg/m(3) within five particle size ranges. Total I-TEQ in particulate matter (PM)<1.0 was 2.2 and 3.2 times higher than those in PM>18 and PM2.5-10, respectively. However, the total I-TEQ of thoracic PM contributed approximately 74 % of the total I-TEQ of total PM. The assessment of health risk indicates that exposure to fractions of thoracic PM by inhalation poses a significant cancer risk (>10(-6)).

Hazardous workplace review program in Taiwan.

In Taiwan, relevant mid-term plans and projects of mitigating occupational hazards have been launched in recent years in the hopes of lowering the incidence of occupational hazards. In light of the lack of objective methodologies for researches on issues pertaining occupational safety and health, this research aims to explore the priorities of safety and health issues through focal groups, expert questionnaires and interviews on relevant issues such as hazard installations identified in R181 Prevention of Major Industrial Accidents Recommendation, 1993 proposed during the 18th World Congress on Safety and Health at work in Seoul 2008. Results revealed that distribute reports of major domestic/foreign occupational disasters to relevant sectors for the prevention of major accidents is needed, both from the importance and feasibility analysis. It is the only topic that scored over 4 points in average for expert and focal group consensus. Furthermore, the experts and focal groups came to consensus in the ranking of priority for 4 items, namely: 1) Installations containing/using large quantities of hazardous materials should be prioritized for inspection, 2) Incorporation of hazard installation review/inspection into OSH management system accreditation, 3) Impose operation shutdown as a means of penalty) and 4) Prioritize the promotion of preliminary PHA.

Characteristics of nano-/ultrafine particle-bound PAHs in ambient air at an international airport.

Concentrations of 22 polycyclic aromatic hydrocarbons (PAHs) were estimated for individual particle-size distributions at the airport apron of the Taipei International Airport, Taiwan, on 48 days in July, September, October, and December of 2011. In total, 672 integrated air samples were collected using a micro-orifice uniform deposition impactor (MOUDI) and a nano-MOUDI. Particle-bound PAHs (P-PAHs) were analyzed by gas chromatography with mass selective detector (GC/MSD). The five most abundant species of P-PAHs on all sampling days were naphthalene (NaP), phenanthrene (PA), fluoranthene (FL), acenaphthene (AcP), and pyrene (Pyr). Total P-PAHs concentrations were 152.21, 184.83, and 188.94 ng/m(3) in summer, autumn, and winter, respectively. On average, the most abundant fractions of benzo[a]pyrene equivalent concentration (BaPeq) in different molecular weights were high-weight PAHs (79.29 %), followed by medium-weight PAHs (11.57 %) and low-weight PAHs (9.14 %). The mean BaPeq concentrations were 1.25 and 0.94 (ng/m(3)) in ultrafine particles (<0.1 µm) and nano-particles (<0.032 µm), respectively. The percentages of total BaPeq in nano- and ultrafine particulate size ranges were 52.4 % and 70.15 %, respectively.

Study on occupational safety and health strategy for Taiwan.

The aim of this study was to establish a set of occupational safety and health (OSH) issues and development policies suitable for adoption in Taiwan. A survey was conducted on a sample of 102 experts and 235 industrial work safety personnel in Taiwan for statistical analysis of the general consensus, with the results showing such consensus in 104 individual policy indicators. Our results reveal that the most appropriate targets were considered to be annual 10% reductions in the 'occupational accident disability rate', 'occupational accident injury rate' and 'occupational diseases before 2010'. Responding to the specific question of the appropriate method of achieving a reduction in the number of accidents in Taiwan, the primary consideration for 13.4% of the experts and 10.6% of the industry personnel was 'promoting OSH awareness and enhancing the overall safety culture'. As regards the current OSH policy focus, 11.2% of the experts considered 'improving OSH legislation, standards and systems' to be the most important, whilst 8.9% of the industry personnel felt that 'recognizing work stress, overwork and emerging OSH issues' were the most important.