One-Pot Synthesis of Layered Disodium Zirconium Phosphate: Crystal Structure and Application in the Remediation of Heavy-Metal-Contaminated Wastewater.

Inorganic ion exchangers offer advantages whenever operation at high temperatures or in oxidizing environments is required. A novel two-dimensional disodium zirconium phosphate, Zr(NaPO4)2·H2O, was reported and investigated as an ion exchanger for heavy metals. The material was synthesized by a novel minimalistic solventless approach, and its solid-state structure was determined from powder X-ray diffraction data. Zr(NaPO4)2·H2O crystallizes in the space group P21/c with cell parameters a = 8.7584(1) Å, b = 5.3543(1) Å, c = 18.1684(3) Å, ß = 109.053 (1)°, and Z = 4. Its layered structure is similar to that of α-zirconium phosphate, Zr(HPO4)2·H2O. However, unlike α-zirconium phosphate which is limited in practical applications by its narrow interlayer spacing (d = 7.6 Å), the disodium zirconium phosphate has a larger spacing of 8.6 Å between planes. The material with inherent structural advantages displays excellent sorption for heavy metals such as Pb2+, Cu2+, Cd2+, and Tl+, maintaining its high selectivity with distribution coefficients, Kd, of 104-105 mL/g even in the presence of a large excess of Na+, K+, Mg2+, and Ca2+, which are commonly present in underground water. In particular, the maximum sorption capacity for the highly toxic Tl+ is a record high, 5.07 mmol/g (1036 mg/g). The fast reaction kinetics indicate that the exchangeable positions in Zr(NaPO4)2·H2O are readily accessible, in contrast to Zr(HPO4)2·H2O. The ease of preparation, benign nature, and advantageous ion-exchange properties make Zr(NaPO4)2·H2O a highly promising sorbent for the treatment of water polluted with heavy metals.

Supramolecular self-assembly of 1D and 3D heterometallic coordination polymers with triruthenium building blocks.

Ru(3)(TSA)(6) (1; H(2)TSA=2-thiosalicylic acid), which bears six peripheral carboxylate groups and was isolated in the form [NEt(4)](1.5)[Ru(3)(HTSA)(2)(TSA)(4)](OAc)(0.5)·3.5H(2)O, serves as a building block for assembly of heterometallic coordination polymers. Treatment of 1 with [Fe(acac)(3)] (acac=acetylacetonate) in EG/H(2)O (EG=ethylene glycol) afforded 1D Ru(3)-Fe coordination polymer 2 by means of the connection of the building block 1 through iron centers. Treatment of 1 with MnCl(2) in EG resulted in the formation of 1D Ru(3)-Mn(3) coordination polymer 3, which features self-assembled polynuclear linking units Mn(3)(OCH(2)CH(2)O)(3), each of which contains a planar Mn(3)O(3) ring. By treating 1 with Gd(NO(3))(3) and NaHCO(3) in EG, a 3D Ru(3)-Gd(6) coordination polymer 4 was obtained; this 3D coordination polymer features unprecedented Gd(6)(µ(3)-CO(3))(4) units. The magnetic properties of 1-4, along with DFT calculations on the electronic structure of 1, are also described.

Luminescent organoplatinum(II) complexes with functionalized cyclometalated C

A series of [(R'-C^N^C-R'')Pt(L)] complexes with doubly deprotonated cyclometalated R'-C^N^C-R'' ligands (R'-C^N^C-R''=2,6-diphenylpyridine derivatives) functionalized with carbazole, fluorene, or thiophene unit(s) have been synthesized and their photophysical properties studied. The X-ray crystal structures reveal extensive intermolecular π···π and C-H···π interactions between the cyclometalated C^N^C ligands. Compared to previously reported cyclometalated platinum(II) complexes [(C^N^C)Pt(L)], which are non-emissive in solution at room temperature, the carbazole-, fluorene- and thiophene-functionalized [(R'-C^N^C-R'')Pt(L)] (L=DMSO 1-9, C≡N-Ar, 1a-9a) complexes are emissive in solution at room temperature with λ(max) at 564-619 nm and Φ=0.02-0.26. The emissions of the [(R'-C^N^C-R'')Pt(L)] complexes are attributed to electronic excited states with mixed (3)MLCT and (3)IL character. The carbazole/fluorene/thiophene unit(s) allow the tuning of the electronic properties of the [(R'-C^N^C-R'')Pt] moiety, with the emission maxima in a range of 564-619 nm. These are the first examples of organoplatinum(II) complexes bearing doubly deprotonated cyclometalated C^N^C ligands that are emissive in solution at room temperature. In non-degassed DMSO, the emission intensities of 6a-9a are enhanced upon exposure to ambient light. This phenomenon is caused by reacting photogenerated (1)O(2) with a DMSO molecule to form dimethyl sulfone, leading to the removal of dissolved oxygen in solution. Self-assembled nanowires and nanorods are obtained from precipitation of 3a in THF/H(2)O and 8a in DMSO/Et(2)O, respectively. The [(R'-C^N^C-R'')Pt(L)] complexes are soluble in common organic solvents with a high thermal stability (>300 °C), rendering them as phosphorescent dopants for organic light-emitting diode (OLEDs) applications. Red OLEDs with CIE coordinates of (0.65±0.01, 0.35±0.01) were fabricated from 7a or 8a. A maximum external efficiency (η(Ext)) of 12.6% was obtained for the device using 8a as emitter.

Molecular wheels of ruthenium and osmium with bridging chalcogenolate ligands: edge-shared-octahedron structures and metal-ion binding.

Inventing new wheels: reaction of [M(3)(CO)(12) ] (M=Ru, Os) with 4-RC(6)H(4)SH afforded [{M(S-4-RC(6)H(4))(2)(CO)(2)}(8)] (R=H; I) or [{M(S-4-RC(6)H(4))(2)(CO)(2)}(6)] (R=Me, iPr; II; see scheme), all of which have been structurally characterized. The octamers I are unique metal molecular wheels featuring skew-edge-shared octahedra with a central planar M(8) octagon. [{Ru(S-4-iPrC(6)H(4))(2)(CO)(2)}(6)] selectively binds a Cu(+) or Ag(+) ion to form [M'{Ru(S(4-iPr-C(6)H(4)))(2)(CO)(2)}(6)](+) (III).

Bis(5,7-dimethyl-8-hydroxyquinolinato)platinum(II) complex for efficient organic heterojunction solar cells.

Organic photovoltaic (OPV) cells using metal(II) (Pt, Pd, Cu, and Ni) chelates of 8-hydroxyquinoline (Hq) or 5,7-dimethyl-8-hydroxy-quinoline (HMe(2)q) as an electron donor were fabricated by vacuum deposition. The bis(5,7-dimethyl-8-hydroxyquinolinato)platinum(II) [Pt(Me(2) q)(2)]-based OPVs showed the best performance with an open voltage (V(OC)) of 0.42 V, a short circuit current density (J(SC) ) of 14.8 mA cm(-2) , and a maximum power conversion efficiency (η(P) ) of 2.4%. The X-ray single-crystal structures together with the grazing incidence X-ray diffraction (GIXRD) data of thin film samples reveal that the peripheral methyl substituent(s) and platinum(II) ion are essential for the high degree of film crystallinity resulting in improved performance of the as-fabricated field-effect transistors (FETs) and OPV cells.

Organo- and hydrogelators based on luminescent monocationic terpyridyl platinum(II) complexes with biphenylacetylide ligands.

A series of phosphorescent terpyridyl platinum(II) complexes with ancillary biphenylacetylide ligands, namely, [(R(3)tpy)PtC≡C(biphenyl)]X (R=tBu, H, or Et(2)N; tpy=2,2';6',2''-terpyridyl; X is an anion) were synthesized and structurally characterized by various spectroscopic techniques and X-ray diffraction methods. Despite a lack of long alkyl chain(s) or hydrogen-bonding motif(s), complexes [(tpy)PtC≡C(biphenyl)]Cl and [(tBu(3)tpy)PtC≡C(biphenyl)]X (X=Cl, ClO(4), PF(6), or BF(4)) were found to gelate water and organic solvents, respectively. The self-aggregation of these complexes in solutions and the resulting gels were investigated with variable-temperature (VT) (1)H NMR spectroscopy, polarized optical microscopy, and absorption/emission spectroscopy. SEM micrographs on dry gels revealed entangled nanofibers with diameters of 20-40 nm and lengths of tens of micrometers. Powder X-ray diffraction (PXRD) study revealed various degrees of crystallinity of these fibrillar nanostructures. The substituents on both the terpyridyl and acetylide ligands and counterion of these complexes play a profound but concerted role in tuning the intermolecular metal···metal and/or π-π interactions, and hence the gelation properties.

Homoleptic ruthenium(III) chalcogenolates: a single precursor to metal chalcogenide nanoparticles catalyst.

Eight homoleptic metal(III) arylchalcogenolate polymers [M(EPh-p-X)(3)](n) (M = Ru, Cr, and Mo) were characterized by PXRD. Structural solution of [Ru(SPh-p-tBu)(3)](n)1 was achieved by Rietveld refinement of the PXRD data. Pyrolysis of [Ru(SePh)(3)](n)4 produced nanostructured RuSe(2), which selectively catalyzed the reduction of nitro compounds in the presence of other functionalities.

Semirigid aromatic sulfone-carboxylate molecule for dynamic coordination networks: multiple substitutions of the ancillary ligands.

We report dynamic, multiple single-crystal to single-crystal transformations of a coordination network system based on a semirigid molecule, TCPSB = 1,3,5-tri(4'-carboxyphenylsulphonyl)benzene, which nicely balances shape persistence and flexibility to bring about the framework dynamics in the solid state. The networks here generally consist of (1) the persistent core component (denoted as CoTCPSB) of linear Co(II) aqua clusters (Co-O-Co-O-Co) integrated into 2D grids by 4,4'-bipyridine and TCPSB and (2) ancillary ligands (AL) on the two terminal Co(II) ions-these include DMF (N,N'-dimethylformamide), DMA (N,N'-dimethylacetamide), CH(3)CN, and water. Most notably, the ancillary ligand sites are highly variable and undergo multiple substitution sequences while maintaining the solid reactants/products as single-crystals amenable to X-ray structure determinations. For example, when immersed in CH(3)CN, the AL of an as-made single crystal of CoTCPSB-DMF (i.e., DMF being the AL) is replaced to form CoTCPSB-CH(3)CN, which, in air, readily loses CH(3)CN to form CoTCPSB-H(2)O; the CoTCPSB-H(2)O single crystals, when placed in DMF, give back CoTCPSB-DMF in single-crystal form. Other selective, dynamic exchanges include the following: CoTCPSB-DMF reacts with CH(3)CN (to form CoTCPSB-CH(3)CN) but NOT with water, methanol, ethanol, DMA, or pyridine; CoTCPSB-H(2)O specifically pick outs DMF from a mixture of DMF, DMA, and DEF; an amorphous, dehydrated solid from CoTCPSB-H(2)O regains crystalline order simply by immersion in DMF (to form CoTCPSB-DMF). Further exploration with functional, semirigid ligands like TCPSB shall continue to uncover a wider array of advanced dynamic behaviors in solid state materials.

Copper stabilization via spinel formation during the sintering of simulated copper-laden sludge with aluminum-rich ceramic precursors.

The feasibility of incorporating copper-laden sludge into low-cost ceramic products, such as construction ceramics, was investigated by sintering simulated copper-laden sludge with four aluminum-rich ceramic precursors. The results indicated that all of these precursors (γ-Al(2)O(3), corundum, kaolinite, mullite) could crystallochemically stabilize the hazardous copper in the more durable copper aluminate spinel (CuAl(2)O(4)) structure. To simulate the process of copper transformation into a spinel structure, CuO was mixed with the four aluminum-rich precursors, and fired at 650-1150 °C for 3 h. The products were examined using powder X-ray diffraction (XRD) and scanning electron microscopic techniques. The efficiency of copper transformation among crystalline phases was quantitatively determined through Rietveld refinement analysis of the XRD data. The sintering experiment revealed that the optimal sintering temperature for CuAl(2)O(4) formation was around 1000 °C and that the efficiency of copper incorporation into the crystalline CuAl(2)O(4) structure after 3 h of sintering ranged from 40 to 95%, depending on the type of aluminum precursor used. Prolonged leaching tests were carried out by using acetic acid with an initial pH value of 2.9 to leach CuO and CuAl(2)O(4) samples for 22 d. The sample leachability analysis revealed that the CuAl(2)O(4) spinel structure was more superior to stabilize copper, and suggested a promising and reliable technique for incorporating copper-laden sludge or its incineration ash into usable ceramic products. Such results also demonstrated the potential of a waste-to-resource strategy by using waste materials as part of the raw materials with the attainable temperature range used in the production of ceramics.

Synthesis, photophysical and electrophosphorescent properties of fluorene-based platinum(II) complexes.

A series of platinum(II) complexes bearing tridentate cyclometalated C^N^N (C^N^N=6-phenyl-2,2'-bipyridine and π-extended R-C^N^N=3-[6'-(naphthalen-2''-yl)pyridin-2'-yl]isoquinoline) ligands with fluorene units have been synthesised and their photophysical properties have been studied. The fluorene units are incorporated into the cyclometalated ligands by a Suzuki coupling reaction. An increase in the π-conjugation of the cyclometalated ligands confers favourable photophysical properties compared to the 6-phenyl-2,2'-bipyridine analogues. The fluorene-based platinum(II) complexes display vibronic-structured emission bands with λ(max)=558-601 nm, and high emission quantum yields up to 0.76 in degassed dichloromethane. Their emissions are tentatively assigned to excited states with mixed (3)IL/(3)MLCT parentage (IL=intraligand, MLCT=metal-to-ligand charge transfer). The crystal structures of these platinum(II) complexes reveal extensive Pt(II)···π and/or π-π interactions. The fluorene-based platinum(II) complexes are soluble in organic solvents, have high thermal stability with decomposition temperature >350 °C, and can be thermally vacuum-sublimed or solution-processed as phosphorescent dopants for the fabrication of organic light-emitting diodes (OLEDs). A monochromic OLED with 3d as dopant (2 wt%) fabricated by vacuum deposition gave a current efficiency of 14.7 cd A(-1) and maximum brightness of 27000 cd m(-2). A high current efficiency (9.2 cd A(-1)) has been achieved in a solution-processed OLED using complex 3f (5 wt%) doped in a PVK (poly(9-vinylcarbazole)) host.

Coordination networks from Cu cations and tetrakis(methylthio)benzenedicarboxylic acid: tunable bonding patterns and selective sensing for NH(3) gas.

This paper aims to illustrate the rich potential of the thioether-carboxyl combination in generating coordination networks with tunable and interesting structural features. By simply varying the ratio between Cu(NO(3))(2) and the bifunctional ligand tetrakis(methylthio)benzenedicarboxylic acid (TMBD) as the reactants, three coordination networks can be hydrothermally synthesized in substantial yields, which present a distinct evolution with regard to metal-ligand interactions. Specifically, Cu(TMBD)(0.5)(H(2)TMBD)(0.5)·H(2)TMBD (1) was obtained with a relatively small (1:1) Cu(NO(3))(2)/TMBD ratio, and crystallizes as an one-dimensional (1D) coordination assembly based on Cu(I)-thioether interactions, which is integrated by hydrogen-bonding to additional H(2)TMBD molecules to form a three-dimensional (3D) composite network with all the carboxylic acid and carboxylate groups remaining uncoordinated to the metal ions. A medium (1.25:1) Cu(NO(3))(2)/TMBD ratio leads to compound Cu(2)TMBD, in which Cu(I) ions simultaneously bond to the carboxylate and thioether groups, while an even higher (2.4:1) Cu(NO(3))(2)/TMBD ratio produced a mixed-cation compound Cu(II)(2)OHCu(I)(TMBD)(2)·2H(2)O (2), in which the carboxylic groups are bonded to (cupric) Cu(II) ions, and the thioether groups to Cu(I). Despite the lack of open channels in 2, crystallites of this compound exhibit a distinct and selective absorption of NH(3), with a concomitant color change from green to blue, indicating substantial network flexibility and dynamics with regards to gas transport.

Highly conducting two-dimensional copper(I) 4-hydroxythiophenolate network.

An unprecedented 2-D Cu-S network is constructed by self-assembly coordination between Cu(I) and 4-hydroxythiophenol and its structure was determined by using powder X-ray diffraction data. The self-assembled coordination network displays ionic behavior with a bulk electrical conductivity value of 120 S cm(-1).

Reactions of H2S with AgCl within a porous coordination network.

A silver(I) sulfide species is now imbedded in a porous coordination network. Such a composite system builds on the molecule tetrakis(methylthio)-1,4-benzenedicarboxate that holds out the hard carboxylate to europium(III) to form a host net, while taking on AgCl using its soft sulfur side arms. AgCl is then treated with H(2)S to form the dark-colored Ag(2)S species, while leaving the hard host net intact and upstanding. This hard-soft duality serves to conjoin the rich electronic flavors of metal chalcogenides and the flexible textures of coordination nets.

Homoleptic platinum(II) and palladium(II) organothiolates and phenylselenolates: solvothermal synthesis, structural determination, optical properties, and single-source precursors for PdSe and PdS nanocrystals.

Homoleptic d(8)-metal organothiolates and phenylselenolates [M(EC(6)H(5))(2)](infinity) (E=S, M=Pt 1, M=Pd 2, M=Ni 5; E=Se, M=Pt 3, M=Pd 4) were prepared as crystalline solids under solvothermal conditions. Their structures were solved using powder X-ray diffraction data. In each case, the EC(6)H(5) (E=S, Se) ligand binds to two metal ions (M=Pt, Pd, and Ni) to form chain-like structures with planar (in 1) or zig-zag (in 2-5) conformations. The [M(SR)(2)](infinity) complexes (M=Pt, R=4-tert-butylphenyl 6; R=2-naphthyl 8; R=4-nitrophenyl 10 and M=Pd, R=4-tert-butylphenyl 7; R=2-naphthyl 9; R=4-nitrophenyl 11) were prepared under similar solvothermal conditions. Based on the XPS binding energies and elemental analyses, complexes 6-11 have the same [M(SR)(2)](infinity) formulation as 1 and 2. The cyclic complex [Pd(6)(SCH(3))(12)] 12 was prepared as a crystalline solid by solvothermal annealing treatment of the amorphous precipitate. A chain-like polymer structure is proposed for both [Pd(SC(12)H(25))(2)](infinity) 13 and [Pd(SC(16)H(33))(2)](infinity) 14; these polymeric chains self-assemble to give layer-like structures. Solid-state diffuse reflectance spectra reveal that the optical band gap E(g) (eV) of complexes 1, 6, 8, 10 and of 2, 7, 9, 11 are in the range of 2.10-3.00 eV and 2.10-2.63 eV, respectively, and 5 has the lowest E(g) value (1.72 eV). Heating solid samples of 4 and 13 under solvothermal conditions afforded phase-pure Pd(17)Se(15) and PdS nanocrystals, respectively. Field-effect transistors fabricated with a drop-cast thin film made from Pd(17)Se(15) nanocrystals prior treated with an ethanolic solution of 1-hexadecanethiol displayed ambipolar charge transporting properties with hole and electron mobility being 7x10(-2) cm(2) V(-1) s(-1) and 6x10(-2) cm(2) V(-1) s(-1), respectively.

trans-[Os(III)(salen)(CN)(2)](-): a new paramagnetic building block for the construction of molecule-based magnetic materials.

A novel dicyanoosmium(III) complex, trans-Ph(4)P[Os(III)(salen)(CN)(2)].CH(2)Cl(2).H(2)O (1; Ph(4)P(+) = tetraphenylphosphonium cation, salen(2-) = N,N'-ethylenebis(salicylideneaminato) dianion), has been synthesized and structurally characterized. Reactions of 1 with [Cu(Me(3)tacn)(H(2)O)(2)](ClO(4))(2) (Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane) under different conditions produce the 1-D ferromagnetic zigzag chains [Os(salen)(CN)(2)](2)[Cu(Me(3)tacn)].CH(3)OH (2) and [Os(salen)(CN)(2)][Cu(Me(3)tacn)].ClO(4) (3).

Dual anti-angiogenic and cytotoxic properties of ruthenium(III) complexes containing pyrazolato and/or pyrazole ligands.

An oxo-bridged diruthenium(III) complex containing pyrazolato and pyrazole ligands is stable against ascorbic-acid reduction, induces apoptosis (60%, 48 h) against HeLa cells at 10 microM level and exhibits promising anti-angiogenic activity at its sub-cytotoxic concentrations. Other mononuclear ruthenium(III) complexes containing pyrazole ligands [Ru(pz)(4)X(2)](+) exhibit dual anti-angiogenic and cytotoxic properties.