Lateral Flow Assays Biotesting by Utilizing Plasmonic Nanoparticles Made of Inexpensive Metals - Replacing Colloidal Gold.

Nanoparticles (NPs) can be conjugated with diverse biomolecules and employed in biosensing to detect target analytes in biological samples. This proven concept was primarily used during the COVID-19 pandemic with gold NPs-based lateral flow assays (LFAs). Considering the gold price and its worldwide depletion, here we show that novel plasmonic nanoparticles (NPs) based on inexpensive metals, titanium nitride (TiN) and copper covered with a gold shell (Cu@Au), perform comparable or even better than gold nanoparticles. After conjugation, these novel nanoparticles provided high figures of merit for LFA testing, such as high signals and specificity and robust naked-eye signal recognition. To the best of our knowledge, our study represents the 1st application of laser-ablation-fabricated nanoparticles (TiN) in the LFA and dot-blot biotesting. Since the main cost of the Au NPs in commercial testing kits is in the colloidal synthesis, our development with TiN is very exciting, offering potentially very inexpensive plasmonic nanomaterials for various bio-testing applications. Moreover, our machine learning study showed that the bio-detection with TiN is more accurate than that with Au.

Regular Arrays of Rod-Shaped Molecular Photoswitches: Synthesis, Preparation, Characterization, and Selective Photoswitching within Mono- and Bilayer Systems.

We assembled photoresponsive mono- and bilayer systems with well-defined properties from rod-shaped molecules equipped with different photoswitches. Using properly chosen chromophores (diarylethene-based switch and unidirectional light-driven molecular motor), we then selectively targeted layers made of the same types of photoswitches using appropriate monochromatic light. UV-vis analysis confirmed smooth and unrestricted photoisomerization. To achieve this, we synthesized a new class of triptycene-based molecular pedestals adept at forming sturdy Langmuir-Blodgett films on a water-air interface. The films were smoothly transferred to gold and quartz surfaces. Repeated deposition afforded bilayer systems: one layer containing diarylethene-based photoswitches and the other a unidirectional light-driven molecular motor. Structural analysis of both mono- and bilayer systems revealed the molecules to be tilted with carboxylic functions pointing to the surface. At least two different polymorphs differing in monolayer thickness and tilt angle (~40° and ~60°) were identified on the gold surface.

Paramagnetism in Microwave-Synthesized Metal-Free Nitrogen-Doped Graphene Quantum Dots.

Nitrogen-doped graphene quantum dots (NGQDs) have gained significant attention due to their various physical and chemical properties; however, there is a gap in the study of NGQDs' magnetic properties. This work adds to the efforts of bridging the gap by demonstrating the room temperature paramagnetism in GQDs doped with Nitrogen up to 3.26 at.%. The focus of this experimental work was to confirm the paramagnetic behavior of metal free NGQDs resulting from the pyridinic N configuration in the GQDs host. Metal-free nitrogen-doped NGQDs were synthesized using glucose and liquid ammonia as precursors by microwave-assisted synthesis. This was followed by dialysis filtration. The morphology, optical, and magnetic properties of the synthesized NGQDs were characterized carefully through atomic force microscopy (AFM), transmission electron microscopy (TEM)), UV-VIS spectroscopy, fluorescence, X-ray photon spectroscopy (XPS), and vibrating sample magnetometer (VSM). The high-resolution TEM analysis of NGQDs showed that the NGQDs have a hexagonal crystalline structure with a lattice fringe of ~0.24 nm of (1120) graphene plane. The N1s peak using XPS was assigned to pyridinic, pyrrolic, graphitic, and oxygenated NGQDs. The magnetic study showed the room-temperature paramagnetic behavior of NGQDs with pyridinic N configuration, which was found to have a magnetization of 20.8 emu/g.

In Situ Ellipsometry Measurements on the Halide Phase Segregation of Mixed Halide Lead Perovskites.

Methylammonium lead iodide bromides MAPb(Brx I1-x )3 are a class of mixed halide lead perovskites, materials that offer high-power conversion efficiencies and bandgap tunability. For these reasons, they are a promising absorber material for future solar cells, although their use is still limited due to several factors. The reversible phase segregation under even low light intensities is one of them, lowering the effective bandgap due to local segregation into iodide-rich and bromide-rich phases. While several studies have been done to illuminate the mechanism and suppression of phase segregation, challenges remain to understand its kinetics. We obtained dynamic ellipsometric measurements from x=0.5 mixed halide lead perovskite thin films protected by a polystyrene layer under green laser light with a power density of ∼11 W/cm2 . Time constants between 1.7(±0.7)×10-3  s-1 for the segregation and 1.5(±0.6)×10-4  s-1 for recovery were calculated. The phase segregation rate constants are surprisingly two orders of magnitude slower than and the recovery rate is consistent with those measured using photoluminescence methods under similar conditions. These results confirm a concern in the literature about the complexity in the phase separation kinetics measured from photoluminescence. We expect ellipsometry to serve as a complementary technique to other spectroscopies in studying mixed-halide lead perovskites phase segregation in the future.

Polymer-solvent interaction and conformational changes at a molecular level: Implication to solvent-assisted deformation and aggregation at the polymer surface.

HYPOTHESIS: We hypothesize that varying the chemical structure of the monomeric unit in a polymer will affect the surface structure and interfacial molecular group orientations of the polymer film leveraging its response to solvents of different chemical affinities. EXPERIMENTS: Poly (2-methoxy ethyl methacrylate) and poly (2-tertbutoxy ethyl methacrylate) thin films exposed to either deuterated water (D2O) or deuterated chloroform (CDCl3) were studied by sum frequency generation (SFG) spectroscopy, contact angle goniometry, and atomic force microscopy (AFM) at the polymer-solvent interface, supported with molecular simulation studies. FINDINGS: SFG spectral analysis of the polymer thin films corroborated molecular re-organization at the surface when exposed to different chemical environments. The AFM height images of the polymer surfaces were homogeneously flat under CDCl3 and showed swollen regions under D2O. Following the removal of D2O, the exposed areas have imprinted, recessed locations and exposure to CDCl3 resulted in the formation of aggregates. The chemical affinity and characteristics of the solvents played a role in conformational change at the polymer surface. It had direct implications to interfacial processes involving adsorption, permeation which eventually leads to swelling, deformation or aggregation, and possibly dissolution.

Evident phase separation and surface segregation of hydrophobic moieties at the copolymer surface using atomic force microscopy and SFG spectroscopy.

HYPOTHESIS: Copolymers are developed to enhance the overall physical and chemical properties of polymers. The surface nature of a copolymer is relevant to creating efficient materials to improve adhesion and biocompatibility. We hypothesize that the improved adhesion, as a surface property, is due to phase separation, surface segregation, and the overall molecular organization of different polymer components at the copolymer surface. EXPERIMENTS: The surface structure of a copolymer composed of 2-hydroxyethyl methacrylate (HEMA) monomer and 2-phenoxyethyl methacrylate (PhEMA) monomer was analyzed in comparison to the polyHEMA and polyPhEMA homopolymers using atomic force microscopy (AFM) and sum frequency generation (SFG) spectroscopy. FINDINGS: The contrast in the phase images was due to the variance in the hydrophobic level provided by the hydroxyl and phenoxy modified monomers in the copolymer. The distribution of the adhesion values, supporting the presence of hydrophobic moieties, across the polymer surface defined the surface segregation of these two components. SFG spectra of the copolymer thin film showed combined spectral features of both polyHEMA and polyPhEMA thin films at the polymer surface. The tilt angles of the alpha-methyl group of homopolymers using the polarization intensity ratio analysis and the polarization mapping method were estimated to be in the range from 48° to 66°.

Role of the cationic headgroup to conformational changes undergone by shorter alkyl chain surfactant and water molecules at the air-liquid interface.

HYPOTHESIS: Surfactants are commonly used as corrosion inhibitors for oil-and-gas pipelines. The alkyl chain of surfactants and their overall conformation contributes to the adsorption, flotation, and foam separation in the inhibition process. We hypothesize that the conformation of shorter alkyl chains and chemical nature of surfactants has an effect on the ordering of water molecules at the air-water interface which is not yet well understood. EXPERIMENTS: Alkyl (C4, C6, C8, C10, and C12) dimethylbenzylammonium bromides (Quats) were synthesized. Aqueous solutions at 0% and with different salt concentrations were studied at the air-liquid interface using sum frequency generation spectroscopy. Surface tension and pH measurement were also conducted for comparison. FINDINGS: Surfactant solutions at 0%, 1%, and 10% salt showed a zigzag trend for the number of gauche defects. At 0% salt, an increasing trend of OH band intensity at 3182 cm-1 was observed from C6 to C12 SFG spectra. Yet, C4 showed a more prominent SFG signal from strongly hydrogen-bonded water molecules compared to C6. The headgroup's chemical nature was found to play a role in the ordering of water molecules for a C4 alkyl chain length. The OH band intensity decreases with increasing ionic strength.

Orientational Analysis of Monolayers at Low Surface Concentrations Due to an Increased Signal-to-Noise Ratio (S/N) Using Broadband Sum Frequency Generation Vibrational Spectroscopy.

Sum frequency generation (SFG) * Equal contributors. spectroscopy was used to deduce the orientation of the terminal methyl (CH3) group of self-assembled monolayers (SAMs) at the air-solid and air-liquid interfaces at surface concentrations as low as 1% protonated molecules in the presence of 99% deuterated molecules. The SFG spectra of octadecanethiol (ODT) and deuterated octadecanethiol (d37 ODT) SAMs on gold were used for analysis at the air-solid interface. However, the eicosanoic acid (EA) and deuterated EA (d39 EA) SAMs on the water were analyzed at the air-liquid interface. The tilt angle of the terminal CH3 group was estimated to be ∼39 ° for a SAM of 1% ODT : 99% d37 ODT, whereas the tilt angle of the terminal CH3 group of the 1% EA : 99% d39 EA monolayer was estimated to be ∼32 °. The reliability of the orientational analysis at low concentrations was validated by testing the sensitivity of the SFG spectroscopy. A signal-to-noise (S/N) ratio of ∼60 and ∼45 was obtained for the CH3 symmetric stretch (SS) of 1% ODT : 99% d37 ODT and 1% EA : 99% d39 EA, respectively. The estimated increase in S/N ratio values, as a measure of the sensitivity of the SFG spectroscopy, verified the capacity to acquire the SFG spectra at low concentrations of interfacial molecules under ambient conditions. Overall, the orientational analysis of CH3 SS vibrational mode was feasible at low concentrations of protonated molecules due to increased S/N ratio. In support, the improved S/N ratio on varying incident power density of the visible beam was also experimentally demonstrated.