Metal Recovery from Natural Saline Brines with an Electrochemical Ion Pumping Method Using Hexacyanoferrate Materials as Electrodes.

The electrochemical ion pumping device is a promising alternative for the development of the industry of recovering metals from natural sources-such as seawater, geothermal water, well brine, or reverse osmosis brine-using electrochemical systems, which is considered a non-evaporative process. This technology is potentially used for metals like Li, Cu, Ca, Mg, Na, K, Sr, and others that are mostly obtained from natural brine sources through a combination of pumping, solar evaporation, and solvent extraction steps. As the future demand for metals for the electronic industry increases, new forms of marine mining processing alternatives are being implemented. Unfortunately, both land and marine mining, such as off-shore and deep sea types, have great potential for severe environmental disruption. In this context, a green alternative is the mixing entropy battery, which is a promising technique whereby the ions are captured from a saline natural source and released into a recovery solution with low ionic force using intercalation materials such as Prussian Blue Analogue (PBA) to store cations inside its crystal structure. This new technique, called "electrochemical ion pumping", has been proposed for water desalination, lithium concentration, and blue energy recovery using the difference in salt concentration. The raw material for this technology is a saline solution containing ions of interest, such as seawater, natural brines, or industrial waste. In particular, six main ions of interest-Na+, K+, Mg2+, Ca2+, Cl-, and SO42--are found in seawater, and they constitute 99.5% of the world's total dissolved salts. This manuscript provides relevant information about this new non-evaporative process for recovering metals from aqueous salty solutions using hexacianometals such as CuHCF, NiHCF, and CoHCF as electrodes, among others, for selective ion removal.

Intermolecular Resonance Correlates Electron Pairs Down a Supermolecular Chain: Antiferromagnetism in K-Doped p-Terphenyl.

Recent interest in potassium-doped p-terphenyl has been fueled by reports of superconductivity at Tc values surprisingly high for organic compounds. Despite these interesting properties, studies of the structure-function relationships within these materials have been scarce. Here, we isolate a phase-pure crystal of potassium-doped p-terphenyl: [K(222)]2[p-terphenyl3]. Emerging antiferromagnetism in the anisotropic structure is studied in depth by magnetometry and electron spin resonance. Combining these experimental results with density functional theory calculations, we describe the antiferromagnetic coupling in this system that occurs in all 3 crystallographic directions. The strongest coupling was found along the ends of the terphenyls, where the additional electron on neighboring p-terphenyls antiferromagnetically couple. This delocalized bonding interaction is reminiscent of the doubly degenerate resonance structure depiction of polyacetylene. These findings hint toward magnetic fluctuation-induced superconductivity in potassium-doped p-terphenyl, which has a close analogy with high Tc cuprate superconductors. The new approach described here is very versatile as shown by the preparation of two additional salts through systematic changing of the building blocks.

Crystallization Induced Enhanced Emission in Two New Zn(II) and Cd(II) Supramolecular Coordination Complexes with the 1-(3,4-Dimethylphenyl)-5-Methyl-1H-1,2,3-Triazole-4-Carboxylate Ligand.

Two new d10 metal supramolecular metal-organic frameworks (SMOFs) with general formula [ML2(H2O)2]n (M = Zn, Cd) have been synthetized using the sodium salt of the anionic 1-(3,4-dimethylphenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylate ligand (Na+L-). Both SMOFs have been structurally characterized by single-crystal X-ray diffraction analysis and IR spectroscopy. The compounds are isostructural and form supramolecular aggregates via hydrogen bonds with the presence of less common dihydrogen bonds. Interestingly, they show ionic conductivity and porosity. The luminescent properties have been also studied by means of the excitation and emission spectra. Periodic DFT and molecular TD-DFT calculations have been used to unravel the emergence of luminescence in the otherwise non-emitting 1-(3,4-dimethylphenyl)-5-methyl-1H-1,2,3-triazole-4-carboxylate ligand once incorporated in the SMOFs. Our results also illustrate the importance of considering the dielectric environment in the crystal when performing excited state calculations for isolated fragments to capture the correct electronic character of the low-lying states, a practice which is not commonly adopted in the community.

Engineering Polar Oxynitrides: Hexagonal Perovskite BaWON2.

Non-centrosymmetric polar compounds have important technological properties. Reported perovskite oxynitrides show centrosymmetric structures, and for some of them high permittivities have been observed and ascribed to local dipoles induced by partial order of nitride and oxide. Reported here is the first hexagonal perovskite oxynitride BaWON2 , which shows a polar 6H polytype. Synchrotron X-ray and neutron powder diffraction, and annular bright-field in scanning transmission electron microscopy indicate that it crystalizes in the non-centrosymmetric space group P63 mc, with a total order of nitride and oxide at two distinct coordination environments in cubic and hexagonal packed BaX3 layers. A synergetic second-order Jahn-Teller effect, supported by first principle calculations, anion order, and electrostatic repulsions between W6+ cations, induce large distortions at two inequivalent face-sharing octahedra that lead to long-range ordered dipoles and spontaneous polarization along the c axis. The new oxynitride is a semiconductor with a band gap of 1.1 eV and a large permittivity.

Structure and Properties of (CH3NH3)3Tl2Cl9: A Thallium-Based Hybrid Perovskite-Like Compound.

The new compound (CH3NH3)3Tl2Cl9 was synthesized and fully characterized. X-ray photoelectron spectroscopy and Raman spectroscopy are consistent with the crystal structure solved by single-crystal X-ray diffraction. This compound is a semiconductor with a measured band gap of Eg = 2.91 eV. It is the first thallium-based hybrid perovskite and shows remarkably high stability to ambient conditions.

Charge Delocalization, Oxidation States, and Silver Mobility in the Mixed Silver-Copper Oxide AgCuO2 ¤.

The electronic structure of AgCuO2, and more specifically the possible charge delocalization and its implications for the transport properties, has been the object of debate. Here the problem is faced by means of first-principles density functional theory calculations of the electron and phonon band structures as well as molecular dynamics simulations for different temperatures. It is found that both Cu and Ag exhibit noninteger oxidation states, in agreement with previous spectroscopic studies. The robust CuO2 chains impose a relatively short contact distance to the silver atoms, which are forced to partially use their d z2 orbitals to build a band. This band is partially emptied through overlap with a band of the CuO2 chain, which should be empty if copper were in a Cu3+ oxidation state. In that way, although structural correlations could roughly be consistent with an Ag+Cu3+O2 formulation, the appropriate oxidation states for the silver and copper atoms become Ag(1+δ)+ and Cu(3-δ)+, and as a consequence, the stoichiometric material should be metallic. The study of the electronic structure suggests that Ag atoms form relatively stable chains that can easily slide despite the linear coordination with oxygen atoms of the CuO2 chains. Phonon dispersion calculations and molecular dynamics simulations confirm the stability of the structure although pointing out that sliding of the silver chains is an easy motion that does not lead to substantial modifications of the electronic structure around the Fermi level and, thus, should not alter the good conductivity of the system. However, this sliding of the silver atoms from the equilibrium position explains the observed large thermal factors.

Graphene and novel graphitic ZnO and ZnS nanofilms: the energy landscape, non-stoichiometry and water dissociation.

The energy landscapes of ultra-thin nanofilms of ZnO and ZnS are examined in detail using periodic hybrid density functional calculations. We predict new staggered graphitic forms, which are stable only for the thinnest films and are of particular interest as the electronic structure shows a spontaneous symmetry breaking across the film and consequently a marked decrease in band gap with thickness. The relative energies of the various forms, their structural and electronic properties and their variation with film thickness are discussed. Possible kinetic pathways for transitions from the graphitic forms are examined by explicit evaluation of transition state energies. For polar surfaces, such as (0001) würtzite and (111) zinc blende, many different mechanisms operate to remove or reduce the surface dipole depending on the number of layers in the nanofilm. The polar ZnS nanofilms, but not the polar ZnO analogues or any non-polar film, are predicted to spontaneously become non-stoichiometric by loss of zinc atoms from the surface. The behaviour of adsorbed water on the ultra-thin films is also examined. There is no dissociation on any ZnS film. For ZnO, dissociation into OH- and H+ takes place not only on (101̄0) würtzite, but also on (110) zinc blende. This result that does not appear to have been reported previously and deserves future experimental study. While we concentrate on ZnO and ZnS, similar energy landscapes are expected for any oxide or sulphide which adopts the würtzite or zinc blende structure in the bulk.

A theoretical study of substitutional boron-nitrogen clusters in diamond.

Substitutional clusters of multiple light element dopants are a promising route to the elusive shallow donor in diamond. To understand the behaviour of co-dopants, this report presents an extensive first principles study of possible clusters of boron and nitrogen. We use periodic hybrid density functional calculations to predict the geometry, stability and electronic excitation energies of a range of clusters containing up to five N and/or B atoms. Excitation energies from hybrid calculations are compared to those from the empirical marker method, and are in good agreement. When a boron-rich or nitrogen-rich cluster consists of three to five atoms, the minority dopant element-a nitrogen or boron atom respectively-can be in either a central or peripheral position. We find B-rich clusters are most stable when N sits centrally, whereas N-rich clusters are most stable with B in a peripheral position. In the former case, excitation energies mimic those of the single boron acceptor, while the latter produce deep levels in the band-gap. Implications for probable clusters that would arise in high-pressure high-temperature co-doped diamond and their properties are discussed.

Self-Assembly of Discrete Metallocycles versus Coordination Polymers Based on Cu(I) and Ag(I) Ions and Flexible Ligands: Structural Diversification and Luminescent Properties.

Three new Ag(I) and one Cu(I) coordination compounds with two different positional isomers, propane-1,3-diyl bis(pyridine-4-carboxylate) (L1) and propane-1,3-diyl bis(pyridine-3-carboxylate) (L2), of a bis-(pyridyl-carboxylate) ligand have been synthesized. X-ray diffraction analysis revealed that the self-assembly of L1 with AgCF3SO3 and AgClO4 salts leads to the formation of discrete binuclear metallocycles {Ag(L1)CF3SO3}2 (1) and {Ag(L1)ClO4}2 (2), respectively. However, self-assembly of the other ligand, L2, with AgCF3SO3 and CuCl salts, results in a 1-D zig-zag chain {Ag(L2)CF3SO3}∞ (3) and a 1-D double-stranded helical chain {Cu2Cl2(L2)2}∞ (4) coordination polymers, respectively. Solid emission spectra recorded at room temperature show interesting luminescence properties for all four compounds in the range from 438 to 550 nm, especially for compound 4 that was found to change its emission color when the wavelength of the excitation radiation is switched from 332 to 436 nm.

Electronic Structure and Magnetic Properties of CuFeS2.

Chalcopyrite (CuFeS2) is an antiferromagnetic semiconductor with unusual magnetic and electrical properties, which are still not clearly understood. Neutron diffraction experiments reveal a phase transition at ∼50 K that has been attributed to an unexpected appearance of magnetic moments on Cu ions, having a paramagnetic arrangement down to 50 K and then ordering to an antiferromagnetic state at lower temperatures. In this study we use DFT-based computational methods to investigate the electronic structure and magnetic properties of CuFeS2 in order to obtain a reliable source of information for the interpretation of the observed magnetic behavior, and in particular to shed some light on the magnetic behavior of copper atoms in this compound. We have calculated the electronic structure of the ground and low-energy magnetically excited states and deduced a set of exchange coupling constants that are used afterward in classical Monte Carlo simulations to obtain magnetic susceptibility data, which compare successfully with our experimental results above ∼170 K. From our results it can be inferred that copper atoms remain in a diamagnetic state in this temperature range, although spin delocalization from neighboring iron atoms results in a non-negligible spin density on the copper atoms at high temperatures.

Nature of holes, oxidation states, and hypervalency in covellite (CuS).

The electronic structure of covellite (CuS) is analyzed on the basis of density functional theory calculations. The nature of holes in the valence band, as well as the so far much debated question of the appropriate oxidation formalism for this conductor, is discussed. The role of S-S bonds and the anomalous coordination of one type of sulfur atom (hypervalency) are considered. It is suggested that the low-temperature transition is mostly a symmetry-lowering process slightly stabilizing the Cu-S network.

Structural stability of quaternary ACuFeS2 (A = Li, K) phases: a computational approach.

At ambient conditions, the quaternary sulfides LiCuFeS(2) and KCuFeS(2) present totally different crystal structures: while LiCuFeS(2) crystallizes in a trigonal CaAl(2)Si(2)-type structure, a tetragonal ThCr(2)Si(2)-like structure is found for KCuFeS(2). In this work, we present a computational study describing first the changes in the structural preference of the ACuFe(2) phases as a function of the alkali ion and second, the structural stability of the CuFeS(2) phases obtained by electrochemical removal of the alkali cations from the two ACuFeS(2) compounds. A high copper mobility is found to be responsible for the observed metastability of the layered trigonal CuFeS(2) phase obtained by delithiation of LiCuFeS(2). In contrast, the tetragonal CuFeS(2) structure obtained removing potassium from KCuFeS(2) is predicted to be stable, both from the kinetic and thermodynamic points of view. The possibility of stabilizing mixed Li(x)Cu(1-x)FeS(2) phases with a ThCr(2)Si(2)-type structure and the mobility of lithium in these is also explored.