Selective femtosecond laser ablation via two-photon fluorescence imaging through a multimode fiber.

We demonstrate the ability of a multimode fiber probe to provide two-photon fluorescence (TPF) imaging feedback that guides the femtosecond laser ablation (FLA) in biological samples for highly selective modifications. We implement the system through the propagation of high power femtosecond pulses through a graded-index (GRIN) multimode fiber and we investigate the limitations posed by the high laser peak intensities required for laser ablation. We demonstrate that the GRIN fiber probe can deliver laser intensities up to 1.5x1013 W/cm2, sufficient for the ablation of a wide range of materials, including biological samples. Wavefront shaping through an ultrathin probe of around 400 µm in diameter is used for diffraction limited focusing and digital scanning of the focus spot. Selective FLA of cochlear hair cells is performed based on the TPF images obtained through the same multimode fiber probe.

High power, ultrashort pulse control through a multi-core fiber for ablation.

Ultrashort pulse ablation has become a useful tool for micromachining and biomedical surgical applications. Implementation of ultrashort pulse ablation in confined spaces has been limited by endoscopic delivery and focusing of a high peak power pulse. Here we demonstrate ultrashort pulse ablation through a thin multi-core fiber (MCF) using wavefront shaping, which allows for focusing and scanning the pulse without requiring distal end optics and enables a smaller ablation tool. The intensity necessary for ablation is significantly higher than for multiphoton imaging. We show that the ultimate limitations of the MCF based ablation are the nonlinear effects induced by the pulse in the MCFs cores. We characterize and compare the performance of two devices utilizing a different number of cores and demonstrate ultrashort pulse ablation on a thin film of gold.

Three-dimensional microfabrication through a multimode optical fiber.

3D printing based on additive manufacturing is an advanced manufacturing technique that allows the fabrication of arbitrary macroscopic and microscopic objects. Many 3D printing systems require large optical elements or nozzles in proximity to the built structure. This prevents their use in applications in which there is no direct access to the area where the objects have to be printed. Here, we demonstrate three-dimensional microfabrication based on two-photon polymerization (TPP) through an ultra-thin printing nozzle of 560 µm in diameter. Using wavefront shaping, femtosecond infrared pulses are focused and scanned through a multimode optical fiber (MMF) inside a photoresist that polymerizes via two-photon absorption. We show the construction of arbitrary 3D structures built with voxels of diameters down to 400 nm on the other side of the fiber. To our knowledge, this is the first demonstration of microfabrication through a multimode optical fiber. The proposed printing nozzle can reach and manufacture micro-structures in otherwise inaccessible areas through small apertures. Our work represents a new area which we refer to as endofabrication.

Lensless two-photon imaging through a multicore fiber with coherence-gated digital phase conjugation.

We performed near-diffraction limited two-photon fluorescence (TPF) imaging through a lensless, multicore-fiber (MCF) endoscope utilizing digital phase conjugation. The phase conjugation technique is compatible with commercially available MCFs with high core density. We demonstrate focusing of ultrashort pulses through an MCF and show that the method allows for resolution that is not limited by the MCF core spacing. We constructed TPF images of fluorescent beads and cells by digital scanning of the phase-conjugated focus on the target object and collection of the emitted fluorescence through the MCF.

Light control in a multicore fiber using the memory effect.

Endoscopic imaging through a multicore fiber (MCF) is widely used but is affected by pixelated images, which limits its resolution to a few micrometers. This is due to the spacing between the cores in the MCF, which is large enough to avoid core-to-core light coupling. Wavefront shaping techniques have been shown to focus light to a resolution finer than the inter core spacing, however a long calibration procedure is needed. Moreover the calibration depends on the optical fiber conformation. Here, we show a calibration method using only one digital hologram. The method is based on digital phase conjugation and the memory effect of the MCF to focus and scan a spot. In addition, we show how simple patterns can be projected using the same multicore fiber.

Super-resolution photoacoustic imaging through a scattering wall.

The use of wavefront shaping to compensate for scattering has brought a renewed interest as a potential solution to imaging through scattering walls. A key to the practicality of any imaging through scattering technique is the capability to focus light without direct access behind the scattering wall. Here we address this problem using photoacoustic feedback for wavefront optimization. By combining the spatially non-uniform sensitivity of the ultrasound transducer to the generated photoacoustic waves with an evolutionary competition among optical modes, the speckle field develops a single, high intensity focus significantly smaller than the acoustic focus used for feedback. Notably, this method is not limited by the size of the absorber to form a sub-acoustic optical focus. We demonstrate imaging behind a scattering medium using two different imaging modalities with up to ten times improvement in signal-to-noise ratio and five to six times sub-acoustic resolution.

Subsurface ablation of atherosclerotic plaque using ultrafast laser pulses.

We perform subsurface ablation of atherosclerotic plaque using ultrafast pulses. Excised mouse aortas containing atherosclerotic plaque were ablated with ultrafast near-infrared (NIR) laser pulses. Optical coherence tomography (OCT) was used to observe the ablation result, while the physical damage was inspected in histological sections. We characterize the effects of incident pulse energy on surface damage, ablation hole size, and filament propagation. We find that it is possible to ablate plaque just below the surface without causing surface damage, which motivates further investigation of ultrafast ablation for subsurface atherosclerotic plaque removal.

High contrast three-dimensional photoacoustic imaging through scattering media by localized optical fluence enhancement.

We demonstrate enhanced three-dimensional photoacoustic imaging behind a scattering material by increasing the fluence in the ultrasound transducer focus. We enhance the optical intensity using wavefront shaping before the scatterer. The photoacoustic signal induced by an object placed behind the scattering medium serves as feedback to optimize the wavefront, enabling one order of magnitude enhancement of the photoacoustic amplitude. Using the enhanced optical intensity, we scan the object in two-dimensions before post-processing of the data to reconstruct the image. The temporal profile of the photoacoustic signal provides the information used to reconstruct the third dimension.

Real-time resilient focusing through a bending multimode fiber.

Multimode optical fibers are attractive for biomedical and sensing applications because they possess a small cross section and can bend over small radii of curvature. However, mode phase-velocity dispersion and random mode coupling change with bending, temperature, and other perturbations, producing scrambling interference among propagating modes; hence preventing its use for focusing or imaging. To tackle this problem we introduce a system capable of re-focusing light through a multimode fiber in 37ms, one order of magnitude faster than demonstrated in previous reports. As a result, the focus spot can be maintained during significant bending of the fiber, opening numerous opportunities for endoscopic imaging and energy delivery applications. We measure the transmission matrix of the fiber by projecting binary-amplitude computer generated holograms using a digital micro-mirror device controlled by a field programmable gate array. The system shows two orders of magnitude enhancements of the focus spot relative to the background.

Laser speckle contrast imaging with extended depth of field for in-vivo tissue imaging.

This work presents, to our knowledge, the first demonstration of the Laser Speckle Contrast Imaging (LSCI) technique with extended depth of field (DOF). We employ wavefront coding on the detected beam to gain quantitative information on flow speeds through a DOF extended two-fold compared to the traditional system. We characterize the system in-vitro using controlled microfluidic experiments, and apply it in-vivo to imaging the somatosensory cortex of a rat, showing improved ability to image flow in a larger number of vessels simultaneously.

Color image projection through a strongly scattering wall.

We present multi-color image projection through highly scattering media for image formation without need of reconstruction. We overcome the fundamental limitations to the transmission of visual information imposed by multiple scattering phenomena via multi-parametric adaptive wavefront modulation that takes into account the scattering properties of the medium. In order to evaluate the wavefront modulation required for a specific image formation we implement a global optimization via a genetic algorithm. We create color images by diffraction and multiple scattering effects as well as via RGB demosaicing.

Genetic algorithm optimization for focusing through turbid media in noisy environments.

We introduce genetic algorithms (GA) for wavefront control to focus light through highly scattering media. We theoretically and experimentally compare GAs to existing phase control algorithms and show that GAs are particularly advantageous in low signal-to-noise environments.

High-speed scattering medium characterization with application to focusing light through turbid media.

We introduce a phase-control holographic technique to characterize scattering media with the purpose of focusing light through it. The system generates computer-generated holograms implemented via a deformable mirror device (DMD) based on micro-electro-mechanical technology. The DMD can be updated at high data rates, enabling high speed wavefront measurements using the transmission matrix method. The transmission matrix of a scattering material determines the hologram required for focusing through the scatterer. We demonstrate this technique measuring a transmission matrix with 256 input modes and a single output mode in 33.8 ms and creating a focus with a signal to background ratio of 160. We also demonstrate focusing through a temporally dynamic, strongly scattering sample with short speckle decorrelation times.

Three-dimensional parallel particle manipulation and tracking by integrating holographic optical tweezers and engineered point spread functions.

We demonstrate an integrated holographic optical tweezers system with double-helix point spread function (DH-PSF) imaging for high precision three-dimensional multi-particle tracking. The tweezers system allows for the creation and control of multiple optical traps in three-dimensions, while the DH-PSF allows for high precision, 3D, multiple-particle tracking in a wide field. The integrated system is suitable for particles emitting/scattering either coherent or incoherent light and is easily adaptable to existing holographic tweezers systems. We demonstrate simultaneous tracking of multiple micro-manipulated particles and perform quantitative estimation of the lateral and axial forces in an optical trap by measuring the fluid drag force exerted on the particles. The system is thus capable of unveiling complex 3D force landscapes that make it suitable for quantitative studies of interactions in colloidal systems, biological materials, and a variety of soft matter systems.