Unravelling dispersion forces in liquid-phase enantioseparation. Part II: Planar chiral 1-(iodoethynyl)-3-arylferrocenes.

BACKGROUND: In the first part of our study on possible contribution of dispersion forces in liquid-phase enantioseparations, the enantioseparation of the axially chiral 3,3'-dibromo-5,5'-bis-ferrocenylethynyl-4,4'-bipyridine with an amylose tris(3,5-dimethylphenylcarbamate)-based chiral column appeared reasonably consistent with a picture of the enantioselective recognition based on the interplay between hydrogen bond (HB), π-π stacking and dispersion interactions. RESULTS: In the second part of this study, we evaluated the impact of analyte and chiral stationary phase (CSP) structure, mobile phase and temperature on the enantioseparations of planar chiral 1-(iodoethynyl)-3-arylferrocenes (3-aryl = phenyl, 2-naphthyl, 4-methylphenyl, 4-t-butylphenyl) with polysaccharide-based chiral columns. The main aim of the present study was to understand the molecular bases of the high affinity observed for the second eluted (Rp)-enantiomer of some of these analytes toward amylose phenylcarbamate-based selectors when methanol-containing mixtures were used as mobile phases. Significantly, higher affinity of the second eluted (Rp)-enantiomer toward the selector could be also observed for the sterically hindered 1-(iodoethynyl)-3-(4-t-butylphenyl)ferrocene (k2 = 6.21) compared to the smaller 1-(iodoethynyl)-3-(4-methylphenyl)ferrocenes (k2 = 4.07) as 2.5% methanol was added to the n-hexane-based mobile phase. SIGNIFICANCE: This study reasonably showed that the contribution of dispersion forces may explain the unusually large retention of the second eluted enantiomers observed for the enantioseparation of some planar chiral 1-(iodoethynyl)-3-arylferrocenes with amylose-based selectors. Based on the obtained results, we can conclude that in liquid-phase enantioseparation steric repulsion can be turned into attraction depending on the features of analyte, selector, and mobile phase.

Discordance in acute gastrointestinal toxicity between synchrotron-based proton and linac-based electron ultra-high dose rate irradiation.

Purpose: Proton FLASH has been investigated using cyclotron and synchrocyclotron beamlines but not synchrotron beamlines. We evaluated the impact of dose rate (ultra-high [UHDR] vs. conventional [CONV]) and beam configuration (shoot-through [ST] vs. spread-out-Bragg-peak [SOBP]) on acute radiation-induced gastrointestinal toxicity (RIGIT) in mice. We also compared RIGIT between synchrotron-based protons and linac-based electrons with matched mean dose rates. Methods and Materials: We administered abdominal irradiation (12-14 Gy single fraction) to female C57BL/6J mice with an 87 MeV synchrotron-based proton beamline (2 cm diameter field size as a lateral beam). Dose rates were 0.2 Gy/s (S-T pCONV), 0.3 Gy/s (SOBP pCONV), 150 Gy/s (S-T pFLASH), and 230 Gy/s (SOBP pFLASH). RIGIT was assessed by the jejunal regenerating crypt assay and survival. We also compared responses to proton [pFLASH and pCONV] with responses to electron CONV (eCONV, 0.4 Gy/s) and electron FLASH (eFLASH, 188-205 Gy/s). Results: The number of regenerating jejunal crypts at each matched dose was lowest for pFLASH (similar between S-T and SOBP), greater and similar between pCONV (S-T and SOBP) and eCONV, and greatest for eFLASH. Correspondingly, mice that received pFLASH SOBP had the lowest survival rates (50% at 50 days), followed by pFLASH S-T (80%), and pCONV SOBP (90%), but 100% of mice receiving pCONV S-T survived (log-rank P = 0.047 for the four groups). Conclusions: Our findings are consistent with an increase in RIGIT after synchrotron-based pFLASH versus pCONV. This negative proton-specific FLASH effect versus linac-based electron irradiation underscores the importance of understanding the physical and biological factors that will allow safe and effective clinical translation.

On the acceptance, commissioning, and quality assurance of electron FLASH units.

Background & Purpose: FLASH or ultra-high dose rate (UHDR) radiation therapy (RT) has gained attention in recent years for its ability to spare normal tissues relative to conventional dose rate (CDR) RT in various preclinical trials. However, clinical implementation of this promising treatment option has been limited because of the lack of availability of accelerators capable of delivering UHDR RT. Commercial options are finally reaching the market that produce electron beams with average dose rates of up to 1000 Gy/s. We established a framework for the acceptance, commissioning, and periodic quality assurance (QA) of electron FLASH units and present an example of commissioning. Methods: A protocol for acceptance, commissioning, and QA of UHDR linear accelerators was established by combining and adapting standards and professional recommendations for standard linear accelerators based on the experience with UHDR at four clinical centers that use different UHDR devices. Non-standard dosimetric beam parameters considered included pulse width, pulse repetition frequency, dose per pulse, and instantaneous dose rate, together with recommendations on how to acquire these measurements. Results: The 6- and 9-MeV beams of an UHDR electron device were commissioned by using this developed protocol. Measurements were acquired with a combination of ion chambers, beam current transformers (BCTs), and dose-rate-independent passive dosimeters. The unit was calibrated according to the concept of redundant dosimetry using a reference setup. Conclusions: This study provides detailed recommendations for the acceptance testing, commissioning, and routine QA of low-energy electron UHDR linear accelerators. The proposed framework is not limited to any specific unit, making it applicable to all existing eFLASH units in the market. Through practical insights and theoretical discourse, this document establishes a benchmark for the commissioning of UHDR devices for clinical use.

Multi-Institutional Audit of FLASH and Conventional Dosimetry With a 3D Printed Anatomically Realistic Mouse Phantom.

PURPOSE: We conducted a multi-institutional dosimetric audit between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3-dimensional (3D) printed mouse phantom. METHODS AND MATERIALS: A computed tomography (CT) scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene (∼1.02 g/cm3) and polylactic acid (∼1.24 g/cm3) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid (∼0.64 g/cm3). Hounsfield units (HU), densities, and print-to-print stability of the phantoms were assessed. Three institutions were each provided a phantom and each institution performed 2 replicates of irradiations at selected anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film. RESULTS: Compared with the reference CT scan, CT scans of the phantom demonstrated mass density differences of 0.10 g/cm3 for bone, 0.12 g/cm3 for lung, and 0.03 g/cm3 for soft tissue regions. Differences in HU between phantoms were <10 HU for soft tissue and bone, with lung showing the most variation (54 HU), but with minimal effect on dose distribution (<0.5%). Mean differences between FLASH and CONV decreased from the first to the second replicate (4.3%-1.2%), and differences from the prescribed dose decreased for both CONV (3.6%-2.5%) and FLASH (6.4%-2.7%). Total dose accuracy suggests consistent pulse dose and pulse number, although these were not specifically assessed. Positioning variability was observed, likely due to the absence of robust positioning aids or image guidance. CONCLUSIONS: This study marks the first dosimetric audit for FLASH using a nonhomogeneous phantom, challenging conventional calibration practices reliant on homogeneous phantoms. The comparison protocol offers a framework for credentialing multi-institutional studies in FLASH preclinical research to enhance reproducibility of biologic findings.

Multi-Institutional Audit of FLASH and Conventional Dosimetry with a 3D-Printed Anatomically Realistic Mouse Phantom.

We conducted a multi-institutional audit of dosimetric variability between FLASH and conventional dose rate (CONV) electron irradiations by using an anatomically realistic 3D-printed mouse phantom. A CT scan of a live mouse was used to create a 3D model of bony anatomy, lungs, and soft tissue. A dual-nozzle 3D printer was used to print the mouse phantom using acrylonitrile butadiene styrene ($~1.02 g/cm^3$) and polylactic acid ($~1.24 g/cm^3$) simultaneously to simulate soft tissue and bone densities, respectively. The lungs were printed separately using lightweight polylactic acid ($~0.64 g/cm^3$). Hounsfield units (HU) and densities were compared with the reference CT scan of the live mouse. Print-to-print reproducibility of the phantom was assessed. Three institutions were each provided a phantom, and each institution performed two replicates of irradiations at selected mouse anatomic regions. The average dose difference between FLASH and CONV dose distributions and deviation from the prescribed dose were measured with radiochromic film. Compared to the reference CT scan, CT scans of the phantom demonstrated mass density differences of $0.10 g/cm^3$ for bone, $0.12 g/cm^3$ for lung, and $0.03 g/cm^3$ for soft tissue regions. Between phantoms, the difference in HU for soft tissue and bone was <10 HU from print to print. Lung exhibited the most variation (54 HU) but minimally affected dose distribution (<0.5% dose differences between phantoms). The mean difference between FLASH and CONV from the first replicate to the second decreased from 4.3% to 1.2%, and the mean difference from the prescribed dose decreased from 3.6% to 2.5% for CONV and 6.4% to 2.7% for FLASH. The framework presented here is promising for credentialing of multi-institutional studies of FLASH preclinical research to maximize the reproducibility of biological findings.

Effects of ovariectomy and estrogen replacement on basal and pelvic nerve stimulated vaginal lubrication in an animal model.

The goal of this study was to investigate the effects of ovariectomy and estrogen replacement on vaginal tissue integrity and vaginal lubrication in basal conditions and in response to pelvic nerve stimulation (PNS). Two weeks after ovariectomy, female New Zealand White rabbits were administered vehicle or estradiol (200 micrograms/day) for an additional 2 weeks. Ovariectomy caused significant vaginal atrophy and diminished vaginal lubrication in the basal state and after PNS, compared to intact controls. Estrogen replacement normalized lubrication values and tissue wet weight to control levels. In conclusion, vaginal tissue integrity and lubrication are diminished by ovariectomy and are normalized by estrogen replacement.

Effects of medical or surgical castration on erectile function in an animal model.

The goal of this study was to investigate the effects of medical castration (luteinizing hormone-receptor hormone [LH-RH] agonist treatment) or surgical castration on erectile function in an animal model. New Zealand White male rabbits were either kept intact (control); surgically orchiectomized; or treated for 2, 4, or 8 weeks with the LH-RH agonist leuprolide acetate (107 microg/kg/mo). At 2 weeks, plasma testosterone levels of orchiectomized and leuprolide acetate-treated animals were 12.8% and 57.4% of intact control animals, respectively. Erectile function was assessed by continuously recording systemic arterial pressure (SAP) and intracavernosal blood pressure (ICP) and determining the ICP:SAP ratios in response to electrical stimulation of the pelvic nerve at varying frequencies (2.5-32 Hz). Androgen deprivation by surgical (orchiectomy) or medical (leuprolide acetate) castration reduced ICP at all frequencies tested but did not alter SAP. Administration of the phosphodiesterase type 5 inhibitor vardenafil (10 microg/kg) did not enhance ICP in surgically orchiectomized or leuprolide acetate-treated animals. Nitric oxide synthase and arginase activities in the corpus cavernosum were not significantly altered by surgical or medical castration. Further, Masson trichrome staining of erectile tissue from androgen-ablated animals showed a reduction in smooth muscle content. These data demonstrate that androgen deprivation achieved by surgical or medical castration adversely affects penile hemodynamics and erectile function without producing significant changes in the activities of nitric oxide synthase or arginase. We conclude that androgen deprivation produces structural alterations in the corpus cavernosum leading to corporal veno-occlusive dysfunction.

Efficacy of vardenafil and sildenafil in facilitating penile erection in an animal model.

Vardenafil and sildenafil are potent and specific phosphodiesterase type 5 (PDE 5) inhibitors. In human penile cavernosal smooth muscle cells, we have previously shown that vardenafil has a lower biochemical inhibition constant (Ki) than sildenafil. In this study, we compared the efficacy of vardenafil and sildenafil in facilitating penile erection in a rabbit model. Penile erections were elicited by submaximal (2.5 or 6 Hz) pelvic nerve stimulation (PNS) repeated every 5 minutes for 30 minutes with or without intravenous (i.v.) administration of vardenafil (1-30 microg/kg) or sildenafil (10-30 microg/kg). Erectile response was assessed by continuously recording intracavernosal pressure (ICP) and systemic arterial pressure (SAP). All data were expressed as a ratio of ICP:SAP. I.v. administration of either PDE 5 inhibitor facilitated PNS-induced erection and increased ICP:SAP in a dose-dependent manner, reaching peak response at approximately 5 minutes. However, the threshold dose at which facilitation of erection occurred was lower for vardenafil (3 microg/kg) than for sildenafil (10 microg/kg). At the 10-microg/kg dose (i.v.), the response duration was significantly greater with vardenafil (169 +/- 23 seconds) than with sildenafil (137 +/- 31 seconds). Direct intracavernosal (i.c.) injection of 1-30 microg/kg vardenafil or sildenafil also caused dose-dependent increases in ICP:SAP in the absence of PNS. Response durations increased in a dose-dependent manner and lasted more than 5 times that of i.v. drug administration coupled with PNS. Irrespective of the route of administration (i.c. or i.v.), at equivalent doses, vardenafil was significantly more efficacious than sildenafil in facilitating pelvic nerve-mediated penile erection and in eliciting erection in the absence of PNS. The increases in ICPs occurred more quickly, were of larger magnitude, and were sustained for longer durations for vardenafil than for sildenafil. On the basis of the biochemical data and physiological responses from this study, further clinical evaluation of vardenafil as treatment for erectile dysfunction is warranted.