Emerging Applications and Regulatory Strategies for Advanced Medicines Manufacturing - Towards the Development of a Platform Approach.

The last decade has seen Advanced Medicines Manufacturing (AMM) progress from isolated product developments to the creation of industry-academic centres of excellence, regulatory innovation progressing leading to new standards, and product commercialisation across multiple product formats. This paper examines these developments focusing on successful applications and strategies presented at the 2023 Symposium of the International Consortium for Advanced Medicines Manufacturing (ICAMM). Despite these exemplar applications, there remain significant challenges to the sector-wide adoption of AMM technologies. Drawing on Symposium delegate expert responses to open-ended questions, our coding-based thematic analysis suggest three primary enablers drive successful adoption of AMM technologies at scale, namely: the ability to leverage pre-competitive collaborations to challenge-based problem solving; information and knowledge sharing through centres of excellence; and the development of AMM specific regulatory standards. Further analysis of expert responses identified the emergence of a 'Platform creation' approach to AMM innovation; characterised by: i) New collaboration modes; ii) Exploration of common product-process platforms for new dosage forms and therapy areas; iii) Development of modular equipment assets that enable scale-out, and offer more decentralized or distributed manufacturing models; iv) Standards based on product-process platform archetypes; v) Implementation strategies where platform-thinking and AMM technologies can significantly reduce timelines between discovery, approval and GMP readiness. We provide a definition of the Platform creation concept for AMM and discuss the requirements for its systematic development.

Why We Need Continuous Pharmaceutical Manufacturing and How to Make It Happen.

We make the case for why continuous pharmaceutical manufacturing is essential, what the barriers are, and how to overcome them. To overcome them, government action is needed in terms of tax incentives or regulatory incentives that affect time.

Regulatory Perspectives on Continuous Pharmaceutical Manufacturing: Moving From Theory to Practice: September 26-27, 2016, International Symposium on the Continuous Manufacturing of Pharmaceuticals.

Continuous manufacturing plays a key role in enabling the modernization of pharmaceutical manufacturing. The fate of this emerging technology will rely, in large part, on the regulatory implementation of this novel technology. This paper, which is based on the 2nd International Symposium on the Continuous Manufacturing of Pharmaceuticals, describes not only the advances that have taken place since the first International Symposium on Continuous Manufacturing of Pharmaceuticals in 2014, but the regulatory landscape that exists today. Key regulatory concepts including quality risk management, batch definition, control strategy, process monitoring and control, real-time release testing, data processing and management, and process validation/verification are outlined. Support from regulatory agencies, particularly in the form of the harmonization of regulatory expectations, will be crucial to the successful implementation of continuous manufacturing. Collaborative efforts, among academia, industry, and regulatory agencies, are the optimal solution for ensuring a solid future for this promising manufacturing technology.

White paper on continuous bioprocessing. May 20-21, 2014 Continuous Manufacturing Symposium.

There is a growing interest in realizing the benefits of continuous processing in biologics manufacturing, which is reflected by the significant number of industrial and academic researchers who are actively involved in the development of continuous bioprocessing systems. These efforts are further encouraged by guidance expressed in recent US FDA conference presentations. The advantages of continuous manufacturing include sustained operation with consistent product quality, reduced equipment size, high-volumetric productivity, streamlined process flow, low-process cycle times, and reduced capital and operating cost. This technology, however, poses challenges, which need to be addressed before routine implementation is considered. This paper, which is based on the available literature and input from a large number of reviewers, is intended to provide a consensus of the opportunities, technical needs, and strategic directions for continuous bioprocessing. The discussion is supported by several examples illustrating various architectures of continuous bioprocessing systems.

White Paper on Continuous Bioprocessing May 20-21 2014 Continuous Manufacturing Symposium.

There is a growing interest in realizing the benefits of continuous processing in biologics manufacturing, which is reflected by the significant number of industrial and academic researchers who are actively involved in the development of continuous bioprocessing systems. These efforts are further encouraged by guidance expressed in recent US FDA conference presentations. The advantages of continuous manufacturing include sustained operation with consistent product quality, reduced equipment size, high-volumetric productivity, streamlined process flow, low-process cycle times, and reduced capital and operating cost. This technology, however, poses challenges, which need to be addressed before routine implementation is considered. This paper, which is based on the available literature and input from a large number of reviewers, is intended to provide a consensus of the opportunities, technical needs, and strategic directions for continuous bioprocessing. The discussion is supported by several examples illustrating various architectures of continuous bioprocessing systems. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

End-to-end continuous manufacturing of pharmaceuticals: integrated synthesis, purification, and final dosage formation.

A series of tubes: The continuous manufacture of a finished drug product starting from chemical intermediates is reported. The continuous pilot-scale plant used a novel route that incorporated many advantages of continuous-flow processes to produce active pharmaceutical ingredients and the drug product in one integrated system.

Regenerative medicine: learning from past examples.

Regenerative medicine products have characteristically shown great therapeutic potential, but limited market success. Learning from the past attempts at capturing value is critical for new and emerging regenerative medicine therapies to define and evolve their business models as new therapies emerge and others mature. We propose a framework that analyzes technological developments along with alternative business models and illustrates how to use both strategically to map value capture by companies in regenerative medicine. We analyze how to balance flexibility of the supply chain and clarity in the regulatory pathway for each business model and propose the possible pathways of evolution between business models. We also drive analogies between cell-based therapies and other healthcare products such as biologicals and medical devices and suggest how to strategically evolve from these areas into the cell therapy space.

Lessons from innovation in drug-device combination products.

Drug-device combination products introduced a new dynamic on medical product development, regulatory approval, and corporate interaction that provide valuable lessons for the development of new generations of combination products. This paper examines the case studies of drug-eluting stents and transdermal patches to facilitate a detailed understanding of the challenges and opportunities introduced by combination products when compared to previous generations of traditional medical or drug delivery devices. Our analysis indicates that the largest barrier to introduce a new kind of combination products is the determination of the regulatory center that is to oversee its approval. The first product of a new class of combination products offers a learning opportunity for the regulator and the sponsor. Once that first product is approved, the leading regulatory center is determined, and the uncertainty about the entire class of combination products is drastically reduced. The sponsor pioneering a new class of combination products assumes a central role in reducing this uncertainty by advising the decision on the primary function of the combination product. Our analysis also suggests that this decision influences the nature (pharmaceutical, biotechnology, or medical devices) of the companies that will lead the introduction of these products into the market, and guide the structure of corporate interaction thereon.

Light induced fluorescence for predicting API content in tablets: sampling and error.

The use of a light induced fluorescence (LIF) instrument to estimate the total content of fluorescent active pharmaceutical ingredient in a tablet from surface sampling was demonstrated. Different LIF sampling strategies were compared to a total tablet ultraviolet (UV) absorbance test for each tablet. Testing was completed on tablets with triamterene as the active ingredient and on tablets with caffeine as the active ingredient, each with a range of concentrations. The LIF instrument accurately estimated the active ingredient within 10% of total tablet test greater than 95% of the time. The largest error amongst all of the tablets tested was 13%. The RMSEP between the techniques was in the range of 4.4-7.9%. Theory of the error associated with the surface sampling was developed and found to accurately predict the experimental error. This theory uses one empirically determined parameter: the deviation of estimations at different locations on the tablet surface. As this empirical parameter can be found rapidly, correct use of this prediction of error may reduce the effort required for calibration and validation studies of non-destructive surface measurement techniques, and thereby rapidly determine appropriate analytical techniques for estimating content uniformity in tablets.

Quantification of lubricant activity of magnesium stearate by atomic force microscopy.

Magnesium stearate (MgSt) is commonly used in pharmaceutical formulations as a lubricant to facilitate tablet release from the die after compression. In this study, we quantify the effect of MgSt on the interaction forces between microcrystalline cellulose (MCC) and steel surfaces. A quantitative approach to better understand the mechanism by which MgSt affects powder performance will assist in improved control and formulation design. We find that the forces between MgSt and steel surface are stronger than the interactions between MgSt itself, between MgSt and an MCC particle, and an MCC particle and a steel surface. These quantitative findings offer an explanation how MgSt facilitates lubrication during tablet ejection.

Nondestructive and on-line monitoring of tablets using light-induced fluorescence technology.

A system using light-induced fluorescence (LIF) technology was developed for rapid and nondestructive analysis of active pharmaceutical ingredients on tablet surfaces. Nonhomogeneous tablets with defined layer of active ingredients were made by 3-Dimensional Printing technology to determine penetration depths of the light source and the resultant fluorescence responses. The LIF method of analysis showed penetration to depths of up to 3 mm into tablets. A correlation between LIF signals from analysis of tablet surfaces and the total drug content of the respective tablets was established. This method of surface analysis was verified with UV spectrometric methods for the total drug content of each respective tablet. The results from a small sample population of tablets made from both homogeneous and nonhomogeneous powder mixtures established good correlation between LIF surface monitoring and total tablet content. The use of on-line monitoring of the individual tablet for surface content demonstrated consistent LIF profiles from simulated production rates up to 3000 tablets a minute. The instrument was also field tested successfully on a tablet analyzer.

Application of vortex flow adsorption technology to intein-mediated recovery of recombinant human alpha1-antitrypsin.

Vortex flow is a secondary flow pattern that appears above a critical rotation rate in the annular gap between an inner rotating solid cylinder and an outer stationary cylindrical shell. By suspending adsorbent resin in the vortices, a novel unit operation, vortex flow adsorption (VFA), is created. In VFA, the rotation of the inner cylinder facilitates the fluidization of the adsorbent resin. Similar to expanded bed processes, VFA has high fluid voidage so that it can be used to recover biochemical products directly from fermentation broths or cell homogenates without removing cells or cell debris first. In this study, recombinant human alpha1-antitrypsin (alpha1-AT) was expressed in Escherichia coli as a fusion with a modified intein containing a chitin-binding domain. Therefore, the fusion protein can be recovered by chitin resin affinity adsorption. The intein can be induced to undergo in vitro peptide bond cleavage to specifically release alpha1-AT from the bound fusion protein. The capture efficiency of the fusion protein, 26.2%, was obtained in the VFA process. In addition, the specific activity of alpha1-AT was dramatically improved from 0.3 to 205.2 EIC/(mg total protein) after adsorption and cleavage. Therefore, vortex flow adsorption is an integrative technology to combine the primary clarification, concentration, and purification steps in conventional downstream processing into a single unit operation to efficiently recover and purify biochemical products.

Continuous desulfurization of dibenzothiophene with Rhodococcusrhodochrous IGTS8 (ATCC 53968).

Desulfurization of a model fuel system consisting of hexadecane and dibenzothiophene (DBT) by Rhodococcus rhodochrous IGTS8 was demonstrated in a 2-L continuous stirred tank reactor (CSTR). The reactor was operated in a semicontinuous and continuous mode with and without recycling of the model fuel. A constant volumetric desulfurization activity A(t), (in mg HBP L(-1) h(-1)) was maintained in the reactor with a feeding strategy of fresh cell suspension based on a first-order decay of the biocatalyst. Maximum desulfurization rates, as measured by specific desulfurization activity, of 1.9 mg HBP/g DCW h were attained. Rates of biocatalyst decay were on the order of 0.072 h(-1). Theoretical predictions of a respiratory quotient (RQ) associated with this biotransformation reaction agree well with experimental data from off-gas analysis. In addition, the ratio of the specific desulfurization activity a(t), (in mg HBP/g DCW h) of recycled and fresh biocatalyst was determined and evaluated.

Relationship between protein structure and methionine oxidation in recombinant human alpha 1-antitrypsin.

alpha 1-Antitrypsin is a metastable and conformationally flexible protein that belongs to the serpin family of protease inhibitors. Although it is known that methionine oxidation in the protein's active site results in a loss of biological activity, there is little specific knowledge regarding the reactivity of each of the protein's methionine residues. In this study, we have used peptide mapping to study the oxidation kinetics of each of alpha 1-antitrypsin's methionines in alpha 1-AT((C232S)) as well as M351L and M358V mutants. These kinetic studies establish that Met1, Met226, Met242, Met351, and Met358 are reactive with hydrogen peroxide at neutral pH and that each reactive methionine is oxidized in a bimolecular, rather than coupled, mechanism. Analysis of Met226, Met351, and Met358 oxidation provides insights regarding the structure of alpha 1-antitrypsin's active site that allow us to relate conformation to experimentally observed reactivity. The relationship between solution pH and methionine oxidation was also examined to evaluate methionine reactivity under conditions that perturb the native structure. Methionine oxidation data show that at pH 5, global conformational changes occur that alter the oxidation susceptibility of each of alpha 1-antitrypsin's 10 methionine residues. Between pH 6 and 9, however, more localized conformational changes occur that affect primarily the reactivity of Met242. In sum, this work provides a detailed analysis of methionine oxidation in alpha 1-antitrypsin and offers new insights into the protein's solution structure.

The reactivity and oxidation pathway of cysteine 232 in recombinant human alpha 1-antitrypsin.

Oxidative damage to the sulfur-containing amino acids, methionine and cysteine, is a major concern in biotechnology and medicine. alpha1-Antitrypsin, which is a metastable and conformationally flexible protein that belongs to the serpin family of protease inhibitors, contains nine methionines and a single cysteine in its primary sequence. Although it is known that methionine oxidation in the protein active site results in a loss of biological activity, there is little specific knowledge regarding the reactivity of its unpaired thiol, Cys-232. In this study, the thiol-modifying reagent NBD-Cl (7-chloro-4-nitrobenz-2-oxa-1,3-diazole) was used to label peroxide-modified alpha1-antitrypsin and demonstrate that the Cys-232 in vitro oxidation pathway begins with a stable sulfenic acid intermediate and is followed by the formation of sulfinic and cysteic acid in successive steps. pH-dependent reactivity with hydrogen peroxide showed that Cys-232 has a pK(a) of 6.86 +/- 0.05, a value that is more than 1.5 pH units lower than that of a typical protein thiol. pH-induced conformational changes in the region surrounding Cys-232 were also examined and indicate that mildly acidic conditions induce a conformation that enhances Cys-232 reactivity. In summary, this work provides new insights into alpha1-antitrypsin reactivity in oxidizing environments and shows that a unique structural environment renders its unpaired thiol, Cys-232, its most reactive amino acid.

Development of a peptide mapping procedure to identify and quantify methionine oxidation in recombinant human alpha1-antitrypsin.

A peptide mapping procedure was developed to identify and quantify methionine oxidation in recombinant human alpha1-antitrypsin. Due to the protein's complex structural biochemistry, chromatographic analysis of methionine containing digest peptides was a significant challenge. However, by using a combination of mass spectrometry, protein engineering, and high-temperature reversed-phase liquid chromatography, we were able to identify methionine residues that are susceptible to oxidation by hydrogen peroxide. and quantify their reactivity. Our results show that five of the protein's 10 methionine residues are susceptible to oxidation at neutral pH, four of which are localized to the active site region.