Gold-Speckled SPION@SiO2 Nanoparticles Decorated with Thiocarbohydrates for ASGPR1 Targeting: Towards HCC Dual Mode Imaging Potential Applications.

Efforts are made to perform an early and accurate detection of hepatocellular carcinoma (HCC) by simultaneous exploiting multiple clinically non-invasive imaging modalities. Original nanostructures derived from the combination of different inorganic domains can be used as efficient contrast agents in multimodal imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) and Au nanoparticles (NPs) possess well-established contrasting features in magnetic resonance imaging (MRI) and X-ray computed tomography (CT), respectively. HCC can be targeted by using specific carbohydrates able to recognize asialoglycoprotein receptor 1 (ASGPR1) overexpressed in hepatocytes. Here, two different thiocarbohydrate ligands were purposely designed and alternatively conjugated to the surface of Au-speckled silica-coated SPIONs NPs, to achieve two original nanostructures that could be potentially used for dual mode targeted imaging of HCC. The results indicated that the two thiocarbohydrate decorated nanostructures possess convenient plasmonic/superparamagnetic properties, well-controlled size and morphology and good selectivity for targeting ASGPR1 receptor.

PbS Quantum Dots Decorating TiO2 Nanocrystals: Synthesis, Topology, and Optical Properties of the Colloidal Hybrid Architecture.

Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials' properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO2/PbS heterostructures. The interest in such hybrid nanostructures arises from their absorption properties that make them advantageous candidates as solar cell materials for more efficient solar light harvesting and improved light conversion. Due to the strong lattice mismatch between TiO2 and PbS, the yield of the hybrid structure and the control over its properties are challenging. In this study, a systematic investigation of the heterostructure synthesis as a function of the experimental conditions (such as seeds' surface chemistry, reaction temperature, and precursor concentration), its topology, structural properties, and optical properties are carried out. The morphological and chemical characterizations confirm the formation of small dots of PbS by decorating the oleylamine surface capped TiO2 nanocrystals under temperature control. Remarkably, structural characterization points out that the formation of heterostructures is accompanied by modification of the crystallinity of the TiO2 domain, which is mainly ascribed to lattice distortion. This result is also confirmed by photoluminescence spectroscopy, which shows intense emission in the visible range. This originated from self-trapped excitons, defects, and trap emissive states.

Au nanoparticle in situ decorated RGO nanocomposites for highly sensitive electrochemical genosensors.

A novel hybrid nanocomposite formed by RGO flakes, surface functionalized by 1-pyrene carboxylic acid (PCA), densely and uniformly in situ decorated by Au NPs, that are concomitantly coordinated by the PCA carboxylic group, and by an aromatic thiol used as the reducing agent in the synthesis, both ensuring, at the same time, a stable non-covalent NPs anchorage to the RGO flakes, and an efficient interparticle electron coupling along the NP network onto the RGO, is reported. The obtained solution processable hybrid material is used to modify Screen-Printed Carbon Electrodes (SPCEs). The hybrid modified SPCEs, functionalized with a thiolated DNA capture probe, are tested in a streptavidin-alkaline-phosphatase catalyzed assay, for the detection of the biotinylated miRNA-221, and for its determination in spiked human blood serum samples. The proposed genosensor demonstrates a high sensitivity (LOD of 0.7 pM), attesting for a performance comparable with the most effective reported sensors. The enhanced sensitivity is explained in terms of the very fast heterogeneous electron transfer kinetics, the concomitant decrease of the electron transfer resistance at the electrode/electrolyte interface, the high electroactivity and the high surface area of the nanostructured hybrid modified SPCEs that provide a convenient platform for nucleic acid biosensing.

Spectroscopic Insights into Carbon Dot Systems.

The controversial nature of the fluorescent properties of carbon dots (CDs), ascribed either to surface states or to small molecules adsorbed onto the carbon nanostructures, is an unresolved issue. To date, an accurate picture of CDs and an exhaustive structure-property correlation are still lacking. Using two unconventional spectroscopic techniques, fluorescence correlation spectroscopy (FCS) and time-resolved electron paramagnetic resonance (TREPR), we contribute to fill this gap. Although electron micrographs indicate the presence of carbon cores, FCS reveals that the emission properties of CDs are based neither on those cores nor on molecular species linked to them, but rather on free molecules. TREPR provides deeper insights into the structure of carbon cores, where C sp2 domains are embedded within C sp3 scaffolds. FCS and TREPR prove to be powerful techniques, characterizing CDs as inherently heterogeneous systems, providing insights into the nature of such systems and paving the way to standardization of these nanomaterials.

Fabrication of photoactive heterostructures based on quantum dots decorated with Au nanoparticles.

Silica based multifunctional heterostructures, exhibiting near infrared (NIR) absorption (650-1200 nm) and luminescence in the visible region, represent innovative nanosystems useful for diagnostic or theranostic applications. Herein, colloidal synthetic procedures are applied to design a photoactive multifunctional nanosystem. Luminescent silica (SiO2) coated quantum dots (QDs) have been used as versatile nanoplatforms to assemble on their surface gold (Au) seeds, further grown into Au spackled structures. The synthesized nanostructures combine the QD emission in the visible region, and, concomitantly, the distinctive NIR absorption of Au nanodomains. The possibility of having multiple QDs in a single heterostructure, the SiO2 shell thickness, and the extent of Au deposition onto SiO2 surface have been carefully controlled. The work shows that a single QD entrapped in 16 nm thick SiO2 shell, coated with Au speckles, represents the most suitable geometry to preserve the QD emission in the visible region and to generate NIR absorption from metal NPs. The resulting architectures present a biomedical potential as an effective optical multimodal probes and as promising therapeutic agents due to the Au NP mediated photothermal effect.

Photoactive hybrid material based on pyrene functionalized PbS nanocrystals decorating CVD monolayer graphene.

A simple and facile solution-based procedure is implemented for decorating a large area, monolayer graphene film, grown by chemical vapor deposition, with size-tunable light absorbing colloidal PbS nanocrystals (NCs). The hybrid is obtained by exposing a large area graphene film to a solution of 1-pyrene butyric acid surface coated PbS NCs, obtained by a capping exchange procedure onto presynthesized organic-capped NCs. The results demonstrate that at the interface, multiple and cooperative π-π stacking interactions promoted by the pyrene ligand coordinating the NC surface lead to a successful anchoring of the nano-objects on the graphene platform which concomitantly preserves its aromatic structure. Interligand interactions provide organization of the nano-objects in highly interconnected nanostructured multilayer coatings, where the NCs retain geometry and composition. The resulting hybrid exhibits a sheet resistance lower than that of bare graphene, which is explained in terms of electronic communication in the hybrid, due to the interconnection of the NC film and to a hole transfer from photoexcited PbS NCs to graphene, channelled at the interface by pyrene. Such a direct electron coupling makes the manufactured hybrid material an interesting component for optoelectronics, sensors and for optical communication and information technology.

Tuning light emission of PbS nanocrystals from infrared to visible range by cation exchange.

Colloidal semiconductor nanocrystals, with intense and sharp-line emission between red and near-infrared spectral regions, are of great interest for optoelectronic and bio-imaging applications. The growth of an inorganic passivation layer on nanocrystal surfaces is a common strategy to improve their chemical and optical stability and their photoluminescence quantum yield. In particular, cation exchange is a suitable approach for shell growth at the expense of the nanocrystal core size. Here, the cation exchange process is used to promote the formation of a CdS passivation layer on the surface of very small PbS nanocrystals (2.3 nm in diameter), blue shifting their optical spectra and yielding luminescent and stable nanostructures emitting in the range of 700-850 nm. Structural, morphological and compositional investigation confirms the nanocrystal size contraction after the cation-exchange process, while the PbS rock-salt crystalline phase is retained. Absorption and photoluminescence spectroscopy demonstrate the growth of a passivation layer with a decrease of the PbS core size, as inferred by the blue-shift of the excitonic peaks. The surface passivation strongly increases the photoluminescence intensity and the excited state lifetime. In addition, the nanocrystals reveal increased stability against oxidation over time. Thanks to their absorption and emission spectral range and the slow recombination dynamics, such highly luminescent nano-objects can find interesting applications in sensitized photovoltaic cells and light-emitting devices.

Three-dimensional self-assembly of networked branched TiO2 nanocrystal scaffolds for efficient room-temperature processed depleted bulk heterojunction solar cells.

In this work, we report on ∼4% power conversion efficiency (PCE) depleted bulk heterojunction (DBH) solar cells based on a high-quality electrode with a three-dimensional nanoscale architecture purposely designed so as to maximize light absorption and charge collection. The newly conceived architecture comprises a mesoporous electron-collecting film made of networked anisotropic metal-oxide nanostructures, which accommodates visible-to-infrared light harvesting quantum dots within the recessed regions of its volume. The three-dimensional electrodes were self-assembled by spin-coating a solution of colloidal branched anatase TiO2 NCs (BNC), followed by photocatalytic removal of the native organic capping from their surface by a mild UV-light treatment and filling with small PbS NCs via infiltration. The PCE ∼ 4% of our TiO2 BNC/PbS QD DBH solar cell features an enhancement of 84% over the performance obtained for a planar device fabricated under the same conditions. Overall, the DBH device fabrication procedure is entirely carried out under mild processing conditions at room temperature, thus holding promise for low-cost and large-scale manufacturing.

Polyelectrolyte multilayers as a platform for luminescent nanocrystal patterned assemblies.

The fabrication of uniform and patterned nanocrystal (NC) assemblies has been investigated by exploiting the possibility of carefully tailoring colloidal NC surface chemistry and the ability of polyelectrolyte (PE) to functionalize substrates through an electrostatic layer-by-layer (LbL) strategy. Appropriate deposition conditions, substrate functionalization, and post-preparative treatments were selected to tailor the substrate surface chemistry to effectively direct the homogeneous electrostatic-induced assembly of NCs. Water-dispersible luminescent NCs, namely, (CdSe)ZnS and CdS, were differently functionalized by (1) ligand-exchange reaction, (2) growth of a hydrophilic silica shell, and (3) formation of a hydrophilic inclusion complex, thus providing functional NCs stable in a defined pH range. The electrostatically charged functional NCs represent a comprehensive selection of examples of surface-functionalized NCs, which enables the systematic investigation of experimental parameters in NC assembly processes carried out by combining LbL procedures with microcontact printing and also exploiting NC emission, relevant for potential applications, as a prompt and effective probe for evaluating assembly quality. Thus, an ample showcase of combinations has been investigated, and the spectroscopic and morphological features of the resulting NC-based structures have been discussed.