The multidirectional roles of the anterior oblique ligament and dorsoradial ligament of the thumb carpometacarpal joint.

The multidirectional biomechanics of the thumb carpometacarpal (CMC) joint underlie the remarkable power and precision of the thumb. Because of the unconfined nature of thumb CMC articulation, these biomechanics are largely dictated by ligaments, notably the anterior oblique ligament (AOL) and the dorsoradial ligament (DRL). However, the rotational and translational stabilizing roles of these ligaments remain unclear, as evidenced by the variety of interventions employed to treat altered pathological CMC biomechanics. The purpose of this study was to determine the effects of sectioning the AOL (n = 8) or DRL (n = 8) on thumb CMC joint biomechanics (rotational range-of-motion [ROM] and stiffness, translational ROM) in 26 rotational directions, including internal and external rotation, and in eight translational directions. Using a robotic musculoskeletal simulation system, the first metacarpal of each specimen (n = 16) was rotated and translated with respect to the trapezium to determine biomechanics before and after ligament sectioning. We observed the greatest increase in rotational ROM and decrease in rotational stiffness in flexion directions and internal rotation following DRL transection and in extension directions following AOL transection. The greatest increase in translational ROM was in dorsal and radial directions following DRL transection and in volar directions following AOL transection. These data suggest the AOL and DRL play complementary stabilizing roles, primarily restraining translations in the direction of and rotations away from the ligament insertion sites. These findings may inform future interventions or implant designs for pathological CMC joints.

The passive biomechanics of the thumb carpometacarpal joint: An in vitro study.

The thumb carpometacarpal (CMC) joint facilitates multidirectional motion of the thumb and affords prehensile power and precision. Traditional methods of quantifying thumb CMC kinematics have been largely limited to range-of-motion (ROM) measurements in 4 orthogonal primary directions (flexion, extension, abduction, adduction) due to difficulties in capturing multidirectional thumb motion. However, important functional motions (e.g., opposition) consist of combinations of these primary directions, as well as coupled rotations (internal and external rotation) and translations. Our goal was to present a method of quantifying the multidirectional in vitro biomechanics of the thumb CMC joint in 6 degrees-of-freedom. A robotic musculoskeletal simulation system was used to manipulate CMC joints of 10 healthy specimens according to specimen-specific joint coordinate systems calculated from computed tomography bone models. To determine ROM and stiffness (K), the first metacarpal (MC1) was rotated with respect to the trapezium (TPM) to a terminal torque of 1 Nm in the four primary directions and in 20 combinations of these primary directions. ROM and K were also determined in internal and external rotation. We found multidirectional ROM was greatest and K least in directions oblique to the primary directions. We also found external rotation coupling with adduction-flexion and abduction-extension and internal rotation coupling with abduction-flexion and adduction-extension. Additionally, the translation of the proximal MC1 was predominantly radial during adduction and predominantly ulnar during abduction. The findings of this study aid in understanding thumb CMC joint mechanics and contextualize pathological changes for future treatment improvement.

Development of an implantable trapezium carpal bone replacement for measuring in vivo loads at the base of the thumb.

Understanding the loads that occur across musculoskeletal joints is critical to advancing our understanding of joint function and pathology, implant design and testing, as well as model verification. Substantial work in these areas has occurred in the hip and knee but has not yet been undertaken in smaller joints, such as those in the wrist. The thumb carpometacarpal (CMC) joint is a uniquely human articulation that is also a common site of osteoarthritis with unknown etiology. We present two potential designs for an instrumented trapezium implant and compare approaches to load calibration. Two instrumented trapezia designs were prototyped using strain gauge technology: Tube and Diaphragm. The Tube design is a well-established structure for sensing loads while the Diaphragm is novel. Each design was affixed to a 6-DOF load cell that was used as the reference. Loads were applied manually, and two calibration methods, supervised neural network (DEEP) and matrix algebra (MAT), were implemented. Bland-Altman 95% confidence interval for the limits of agreement (95% CI LOA) was used to assess accuracy. Overall, the DEEP calibration decreased 95% CI LOA compared with the MAT approach for both designs. The Diaphragm design outperformed the Tube design in measuring the primary load vector (joint compression). Importantly, the Diaphragm design permits the hermetic encapsulation of all electronics, which is not possible with the Tube design, given the small size of the trapezium. Substantial work remains before this device can be approved for implantation, but this work lays the foundation for further device development that will be required.

Dorsal Subluxation of the First Metacarpal During Thumb Flexion is an Indicator of Carpometacarpal Osteoarthritis Progression.

BACKGROUND: Measurable changes in patients with progression of thumb carpometacarpal (CMC) osteoarthritis (OA) include joint space narrowing, osteophyte formation, subluxation, and adjacent-tissue changes. Subluxation, an indication of mechanical instability, is postulated as an early biomechanical indicator of progressing CMC OA. Various radiographic views and hand postures have been proposed to best assess CMC subluxation, but 3D measurements derived from CT images serve as the optimal metric. However, we do not know which thumb pose yields subluxation that most indicates OA progression. QUESTIONS/PURPOSES: Using osteophyte volume as a quantitative measure of OA progression, we asked: (1) Does dorsal subluxation vary by thumb pose, time, and disease severity in patients with thumb CMC OA? (2) In which thumb pose(s) does dorsal subluxation most differentiate patients with stable CMC OA from those with progressing CMC OA? (3) In those poses, what values of dorsal subluxation indicate a high likelihood of CMC OA progression? METHODS: Between 2011 and 2014, 743 patients were seen at our institutions for trapeziometacarpal pain. We considered individuals who were between the ages of 45 and 75 years, had tenderness to palpation or a positive grind test result, and had modified Eaton Stage 0 or 1 radiographic thumb CMC OA as potentially eligible for enrollment. Based on these criteria, 109 patients were eligible. Of the eligible patients, 19 were excluded because of a lack of interest in study participation, and another four were lost before the minimum study follow-up or had incomplete datasets, leaving 86 (43 female patients with a mean age of 53 ± 6 years and 43 male patients with a mean age of 60 ± 7 years) patients for analysis. Twenty-five asymptomatic participants (controls) aged 45 to 75 years were also prospectively recruited to participate in this study. Inclusion criteria for controls included an absence of thumb pain and no evidence of CMC OA during clinical examination. Of the 25 recruited controls, three were lost to follow-up, leaving 22 for analysis (13 female patients with a mean age of 55 ± 7 years and nine male patients with a mean age of 58 ± 9 years). Over the 6-year study period, CT images were acquired of patients and controls in 11 thumb poses: neutral, adduction, abduction, flexion, extension, grasp, jar, pinch, grasp loaded, jar loaded, and pinch loaded. CT images were acquired at enrollment (Year 0) and Years 1.5, 3, 4.5, and 6 for patients and at Years 0 and 6 for controls. From the CT images, bone models of the first metacarpal (MC1) and trapezium were segmented, and coordinate systems were calculated from their CMC articular surfaces. The volar-dorsal location of the MC1 relative to the trapezium was computed and normalized for bone size. Patients were categorized into stable OA and progressing OA subgroups based on trapezial osteophyte volume. MC1 volar-dorsal location was analyzed by thumb pose, time, and disease severity using linear mixed-effects models. Data are reported as the mean and 95% confidence interval. Differences in volar-dorsal location at enrollment and rate of migration during the study were analyzed for each thumb pose by group (control, stable OA, and progressing OA). A receiver operating characteristic curve analysis of MC1 location was used to identify thumb poses that differentiated patients whose OA was stable from those whose OA was progressing. The Youden J statistic was used to determine optimized cutoff values of subluxation from those poses to be tested as indicators of OA progression. Sensitivity, specificity, negative predictive values, and positive predictive values were calculated to assess the performance of pose-specific cutoff values of MC1 locations as indicators of progressing OA. RESULTS: In flexion, the MC1 locations were volar to the joint center in patients with stable OA (mean -6.2% [95% CI -8.8% to -3.6%]) and controls (mean -6.1% [95% CI -8.9% to -3.2%]), while patients with progressing OA exhibited dorsal subluxation (mean 5.0% [95% CI 1.3% to 8.6%]; p < 0.001). The pose associated with the most rapid MC1 dorsal subluxation in the progressing OA group was thumb flexion (mean 3.2% [95% CI 2.5% to 3.9%] increase per year). In contrast, the MC1 migrated dorsally much slower in the stable OA group (p < 0.001), at only a mean of 0.1% (95% CI -0.4% to 0.6%) per year. A cutoff value of 1.5% for the volar MC1 position during flexion at enrollment (C-statistic: 0.70) was a moderate indicator of OA progression, with a high positive predictive value (0.80) but low negative predictive value (0.54). Positive and negative predictive values of subluxation rate in flexion (2.1% per year) were high (0.81 and 0.81, respectively). The metric that most indicated a high likelihood of OA progression (sensitivity 0.96, negative predictive value 0.89) was a dual cutoff that combined the subluxation rate in flexion (2.1% per year) with that of loaded pinch (1.2% per year). CONCLUSION: In the thumb flexion pose, only the progressing OA group exhibited MC1 dorsal subluxation. The MC1 location cutoff value for progression in flexion was 1.5% volar to the trapezium , which suggests that dorsal subluxation of any amount in this pose indicates a high likelihood of thumb CMC OA progression. However, volar MC1 location in flexion alone was not sufficient to rule out progression. The availability of longitudinal data improved our ability to identify patients whose disease will likely remain stable. In patients whose MC1 location during flexion changed < 2.1% per year and whose MC1 location during pinch loading changed < 1.2% per year, the confidence that their disease would remain stable throughout the 6-year study period was very high. These cutoff rates were a lower limit, and any patients whose dorsal subluxation advanced faster than 2% to 1% per year in their respective hand poses, were highly likely to experience progressive disease. CLINICAL RELEVANCE: Our findings suggest that in patients with early signs of CMC OA, nonoperative interventions aimed to reduce further dorsal subluxation or operative treatments that spare the trapezium and limit subluxation may be effective. It remains to be determined whether our subluxation metrics can be rigorously computed from more widely available technologies, such as plain radiography or ultrasound.

Bone morphological changes of the trapezium and first metacarpal with early thumb osteoarthritis progression.

BACKGROUND: Thumb carpometacarpal osteoarthritis is characterized by osteophyte growth and changes in the curvature of the articular surfaces of the trapezium and first metacarpal. The aim of this longitudinal study was to quantify in-vivo bone morphology changes with osteoarthritis progression. METHODS: The study analyzed an observational dataset of 86 subjects with early thumb osteoarthritis and 22 age-matched asymptomatic controls. CT scans of subjects' affected hands were acquired at enrollment (year 0), and at 1.5, 3, 4.5, and 6-year follow-up visits. Osteoarthritic subjects were classified into stable and progressive groups, as defined by osteophyte volume and the rate of osteophyte growth. Trapezium height, width, and volar facet recession, along with first metacarpal volar beak recession and recession angle, were quantified. FINDINGS: Mean trapezium width increased 12% over six years in the progressive osteoarthritis group. Trapezium volar recession of the progressive osteoarthritis group was significantly greater than stable at enrollment (P < 0.0001) and year 6 (P < 0.0001). The first metacarpal volar beak of the progressive osteoarthritis group recessed significantly faster than stable (P = 0.0004) and control (P = 0.0003). In year 6, volar beak surfaces in subjects with progressive osteoarthritis were flatter with reduced curvature, measuring -8.7 ± 4.0 degrees, compared to the stable osteoarthritis (P < 0.0001) and control groups (P = 0.0003), which maintained nominal curvatures, measuring 0.7 ± 2.5 and 0.2 ± 3.2 degrees, respectively. INTERPRETATION: Our results demonstrate significant recession and reduction in the angle of the first metacarpal volar beak in progressive osteoarthritis. Flattening of the first metacarpal volar beak may have important associations with carpometacarpal joint contact and loading migrations, further propagating osteophyte formation and bony remodeling. This work highlights the volar beak of the first metacarpal as a region of morphology change with disease.

Evaluation of the PROMIS Upper Extremity Against Validated Patient-Reported Outcomes in Patients With Early Carpometacarpal Osteoarthritis.

PURPOSE: Internal consistency, construct, and criterion validity of the Patient-Reported Outcomes Measurement Information System (PROMIS) upper extremity (UE) v1.2 were evaluated in patients with early-stage carpometacarpal (CMC) osteoarthritis (OA). We hypothesized that in patients with early CMC OA, PROMIS UE scores would: (1) be lower than those in asymptomatic controls; (2) correlate with established patient-reported outcomes; (3) correlate with pinch and grip strengths; and (4) not correlate with radiographic disease progression. METHODS: Patients with early CMC OA (modified Eaton stage 0 or 1) and matched asymptomatic control patients completed the PROMIS UE, Australian and Canadian Osteoarthritis Hand Index, and Patient-Rated Wrist-Hand Evaluation at 2 time points. The PROMIS UE's internal consistency was evaluated by Cronbach's alpha, construct validity by Spearman correlation coefficients among the patient-reported outcome measures, and criterion validity using measures of strength. A floor or ceiling effect was indicated if more than 15% of patients achieved the lowest or highest possible score. RESULTS: The PROMIS UE had high internal consistency. Patients with early CMC OA had a lower score than healthy controls (average, 42 vs 54, respectively). We observed moderate to high correlations between the PROMIS UEv1.2, Australian and Canadian Osteoarthritis Hand Index, and Patient-Rated Wrist-Hand Evaluation and good criterion validity when compared to key pinch and grip strengths. The PROMIS UE did not correlate to radiographic disease severity. CONCLUSIONS: The PROMIS UE had a high correlation with Australian and Canadian Osteoarthritis Hand Index and a moderate correlation with Patient-Rated Wrist-Hand Evaluation. The PROMIS UE had high internal consistency and good criterion validity. CLINICAL RELEVANCE: The PROMIS UE is a valid assessment for disability in patients with early CMC OA and can serve as a clinical adjunct to an outcome assessment.

Head Impact Exposure in Youth and Collegiate American Football.

The relationship between head impact and subsequent brain injury for American football players is not well-defined, especially for youth. The objective of this study is to quantify and assess Head Impact Exposure (HIE) metrics among youth and collegiate football players. This multi-season study enrolled 639 unique athletes (354 collegiate; 285 youth, ages 9-14), recording 476,209 head impacts (367,337 collegiate; 108,872 youth) over 971 sessions (480 collegiate; 491 youth). Youth players experienced 43 and 65% fewer impacts per competition and practice, respectively, and lower impact magnitudes compared to collegiate players (95th percentile peak linear acceleration (PLA, g) competition: 45.6 vs 61.9; 95th percentile PLA practice: 42.6 vs 58.8; 95th percentile peak rotational acceleration (PRA, rad·s-2) competition: 2262 vs 4422; 95th percentile PRA practice: 2081 vs 4052; 95th percentile HITsp competition: 25.4 vs 32.8; 95th percentile HITsp practice: 23.9 vs 30.2). Impacts during competition were more frequent and of greater magnitude than during practice at both levels. Quantified comparisons of head impact frequency and magnitude between youth and collegiate athletes reveal HIE differences as a function of age, and expanded insight better informs the development of age-appropriate guidelines for helmet design, prevention measures, standardized testing, brain injury diagnosis, and recovery management.

Uncemented Collared Femoral Stems in Total Hip Arthroplasty.

The procedure of total hip arthroplasty (THA) is rapidly evolving. Patients undergoing THA are younger and more active, and they demand an earlier return to their daily activities. All of these factors increase both the early forces on uncemented femoral stems and the risk for complications. Consequently, surgeons must choose implants that provide immediate primary stability. This has led to renewed interest in the use of uncemented collared stems, which have benefits including increased primary stability, decreased risk of subsidence and periprosthetic fracture, and improved load transfer to the proximal femur. [Orthopedics. 2022;45(3):e122-e126.].

The Association of AUSCAN and PRWHE Patient-reported Outcome Measures With Radiographic Progression of Early Thumb Carpometacarpal Arthritis at 36-Month Follow-up Is Limited to Subtle Changes in the Pain Subscale.

BACKGROUND: There is a paucity of literature that examines how patient-reported outcomes correspond to early radiographic progression of thumb carpometacarpal (CMC) osteoarthritis (OA). This study examines how Australian/Canadian Osteoarthritis Hand Index (AUSCAN) and Patient-Rated Hand and Wrist Evaluation (PRWHE) scores change over 36 months in subjects with early CMC OA. METHODS: Ninety-one subjects with symptomatic early thumb CMC OA were enrolled. Differences in AUSCAN and PRWHE scores were measured between subjects at baseline and at 18-month follow-up, and between the subjects at baseline and at 36-month follow-up. Radiographic progression was defined as an increase in modified Eaton Stage. Differences in AUSCAN and PRWHE scores were compared between these 2 groups in order to determine if radiographic progression was associated with a greater change in AUSCAN and PRWHE at 18- and 36-month follow-up. RESULTS: At 18- and 36-month follow-up visits, there were no significant differences in AUSCAN or PRWHE compared to baseline. Multivariable logistic regression analysis did not reveal any significant differences between subjects with radiographic progression to subjects without radiographic progression at 18-month follow-up. At 36-month follow-up, this analysis did demonstrate that subjects with evidence of radiographic progression had a significant increase in the PRWHE pain subscale. CONCLUSION: AUSCAN and PRWHE scores were not found to significantly progress at 18-month and 36-month follow-up. However, when comparing the subset of subjects with and without radiographic OA, subjects with early CMC OA who had 1 stage of radiographic progression were found to have a significantly higher intensity of pain on the PRWHE pain subscale at 36-month follow-up.

An Anatomical Evaluation of the Trapezium and Its Relationship to Basilar Joint Osteophytic Change.

BACKGROUND: To perform a comprehensive osteologic investigation into trapezium anatomy and investigate the relationship between anatomical factors and osteophyte formation, focusing on sex-specific differences. METHODS: This was a cadaveric study involving 1233 trapezia and first metacarpals. Two subgroups ("Control" and "Main Study") were established. The "Control" cohort was used to identify features of the trapezium in specimens devoid of osteophytic change. The prevalence and severity of osteophytic change were investigated in the "Main Study" cohort. Sex differences were specifically assessed. Regression analyses were used to identify factors associated with osteophyte formation. RESULTS: Three discrete surface morphologies exist at the trapezium trapeziometacarpal (TM) facet: heart, quadrilateral, and bean. Controlling for height, men have a larger trapezium TM facet surface area. However, the trapezium assumes the same off-center saddle shape in both sexes. The presence of osteophytes at the basilar joint is a common finding; no differences in osteologic prevalence exist between sexes. The progression of osteophytic change complements the radiographic Eaton-Littler classification system. The trapezium TM facet increases the surface area with incremental osteophyte involvement, with the degree of surface area expansion correlated with increases in the severity of osteophytic change. Increased age, increased surface area, bean morphology, and decreased volar joint depth are associated with more severe osteophyte formation. CONCLUSIONS: Anatomical features of the trapezium may contribute to osteophyte development. Although the prevalence of osteophytic disease appears equal between sexes, sex differences exist in some anatomical parameters. These differences may help explain the increased prevalence of symptomatic basilar joint disease in women.

"Stress taper" fixation increases torsional failure strength in a cadaveric femur model.

BACKGROUND: To potentially limit peri-implant fractures our institution commonly implements a "stress-taper" fixation construct in which the screw lengths towards the proximal end of a construct are incrementally decreased, in order to avoid a focal stress-riser when loaded. To assess this construct, we asked: 1) Does the stress taper strategy increase torsional strength than the bicortical locking construct when biomechanically tested in a cadaveric femur model? 2) Does it fail in a less comminuted fracture pattern? METHODS: Seven matched pairs of cadaveric femora were randomly assigned to one of two distal femur fixation groups: plating with stress taper strategy or bicortical fixation. Specimens were first cyclically loaded, then axially rotated to failure under 800 N of compression. Peak torque at failure, degrees of rotation at failure, and energy to failure were calculated and compared using paired t-tests. Fractures were categorized with the assistance of fluoroscopy according to the Orthopedic Trauma Association classification, 32. FINDINGS: There was significantly greater peak torque (110.6 ± 49.7 Nm vs. 80.6 ± 35.2 Nm), rotation at failure (23.8 ± 5.3° vs 18.9 ± 4.5°) and energy to failure (25.3 ± 15.7 J vs. 14.1 ± 8.3 J) in the stress-taper group as compared to the bicortical group (p = 0.0424), (p = 0.0213) and (p = 0.0460), respectively. 6/7 fractures in the stress-taper group were classified 32 A1 with 1/7 classified A2. 5/7 fractures in the bicortical group were classified B1 and 2/7 classified A2. INTERPRETATION: 'Stress taper fixation' in distal femurs may be protective against peri-implant fractures compared to traditional bicortical fixation. The 'stress taper' concept can increase torsional failure strength in an in vitro model.

Total Wrist Arthroplasty Alignment and Its Potential Association with Clinical Outcomes.

Purpose There is a lack of quantitative research that describes the alignment and, more importantly, the effects of malalignment on total wrist arthroplasty (TWA). The main goal of this pilot study was to assess the alignment of TWA components in radiographic images and compare them with measures computed by three-dimensional analysis. Using these measures, we then determined if malalignment is associated with range of motion (ROM) or clinical outcomes (PRWHE, PROMIS, QuickDash, and grip strength). Methods Six osteoarthritic patients with a single type of TWA were recruited. Radiographic images, computed tomography images, and clinical outcomes of the wrists were recorded. Using posteroanterior and lateral radiographs, alignment measurements were defined for the radial and carpal components. Radiographic measurements were validated with models reconstructed from computed tomography images using Bland-Altman analysis. Biplanar videoradiography (<1mm and <1 degree accuracy) was used to capture and compute ROM of the TWA components. Linear regression assessed the associations between alignment and outcomes. Results Radiographic measures had a 95% limit-of-agreement (mean difference ± 1.96 × SD) of 3 degrees and 3mm with three-dimensional values, except for the measures of the carpal component in the lateral view. In our small cohort, wrist flexion-extension and radial-ulnar deviation were correlated with volar-dorsal tilt and volar-dorsal offset of the radial component and demonstrated a ROM increase of 3.7 and 1.6 degrees per degree increase in volar tilt, and 10.8 and 4.2 degrees per every millimeter increase in volar offset. The carpal component's higher volar tilt was also associated with improvements in patient-reported pain. Conclusions We determined metrics describing the alignment of TWA, and found the volar tilt and volar offset of the radial component could potentially influence the replaced wrist's ROM. Clinical Relevance TWA component alignment can be measured reliably in radiographs, and may be associated with clinical outcomes. Future studies must evaluate its role in a larger cohort.

The role of scapholunate interosseous, dorsal intercarpal, and radiolunate ligaments in wrist biomechanics.

Rupture to wrist ligaments predisposes the joint to degenerative changes. Scapholunate interosseous ligament (SLIL) rupture, especially when compounded by dorsal intercarpal ligament (DIC) and long radiolunate ligament (LRL) disruption, can cause carpal bone kinematic abnormalities. It is essential to delineate the role of these ligaments and their constraints on wrist range-of-motion (ROM) and center of rotation (COR). Wrist ROM and COR location were determined in 9 specimens using a six degree-of-freedom robotic musculoskeletal simulator in 24 directions of wrist motion for four experimental conditions: intact, and after sequential sectioning of the SLIL, DIC, and LRL. Sectioning the SLIL alone did not change wrist ROM in any direction (p > 0.10), while sectioning the SLIL and both the DIC and LRL caused significant increases in radial deviation, radial-extension, and ulnar-flexion ROM (p < 0.05). The COR of the intact wrist was located between the proximal third and middle third of the capitate, depending on the direction of wrist motion. While SLIL sectioning alone did not affect the COR, subsequent DIC sectioning led to a distal shift of COR in motions involving ulnar-extension relative to the intact condition. Additional sectioning of the LRL caused a proximal shift of COR in motions involving radial-flexion. A proximal shift implies a more dominant role of the radiocarpal joint, while a distal shift of the COR implies an increased role for the midcarpal joint. Understanding the role of ligaments on overall wrist mechanics is critical to devising new treatment strategies to restore wrist function.

Biomechanics of the Distal Radioulnar Joint During In Vivo Forearm Pronosupination.

Background Ulnar variance (UV) and center of rotation (COR) location at the level of the distal radioulnar joint (DRUJ) change with forearm rotation. Nevertheless, these parameters have not been assessed dynamically during active in vivo pronosupination. This assessment could help us to improve our diagnosis and treatment strategies. Questions/purposes We sought to (1) mathematically model the UV change, and (2) determine the dynamic COR's location during active pronosupination. Methods We used biplanar videoradiography to study DRUJ during in vivo pronation and supination in nine healthy subjects. UV was defined as the proximal-distal distance of ulnar fovea with respect to the radial sigmoid notch, and COR was calculated using helical axis of motion parameters. The continuous change of UV was evaluated using a generalized linear regression model. Results A second-degree polynomial with R 2 of 0.85 was able to model the UV changes. Maximum negative UV occurred at 38.0 degrees supination and maximum positive UV occurred at maximum pronation. At maximum pronation, the COR was located 0.5 ± 1.8 mm ulnarly and 0.6 ± 0.8 mm volarly from the center of the ulnar fovea, while at maximum supination, the COR was located 0.2 ± 0.6 mm radially and 2.0 ± 0.5 mm volarly. Conclusion Changes in UV and volar translation of the COR are nonlinear at the DRUJ during pronosupination. Clinical Relevance Understanding the dynamic nature of UV as a function of pronosupination can help guide accurate evaluation and treatment of wrist pathology where the UV is an important consideration. The dynamic behavior of COR might be useful in designing DRUJ replacement implants to match the anatomical motion.

In vivo articular contact pattern of a total wrist arthroplasty design.

Total wrist arthroplasty (TWA) designs suffer from relatively high complication rates when compared to other arthroplasties. Understanding the contact pattern of hip and knee replacement has improved their design and function; however, the in vivo contact pattern of TWA has not yet been examined and is thus the aim of this study. We hypothesized that the center of contact (CoC) is located at the geometric centers of the carpal component and radial component in the neutral posture and that the CoC moves along the principal arcs of curvature throughout primary anatomical motions. Wrist motion and implant kinematics of six patients with the Freedom® total wrist implant were studied during various tasks using biplanar videoradiography. The location of the CoC of the components was investigated by calculating distance fields between the articular surfaces. We found the CoC at the neutral posture was not at the geometric centers but was located 3.5 mm radially on the carpal component and 1.2 mm ulnarly on the radial component. From extension to flexion, the CoC moved 10.8 mm from dorsal to volar side on the carpal component (p < 0.0001) and 7.2 mm from volar to dorsal on the radial component (p = 0.0009). From radial to ulnar deviation, the CoC moved 12.4 mm from radial to ulnar on the carpal component (p < 0.0001), and 5.6 mm from ulnar to radial on the radial component (p = 0.009). The findings of this study may eventually improve TWA success by advancing future designs through a more accurate understating of their kinematic performance in vivo.

Optical motion capture accuracy is task-dependent in assessing wrist motion.

Optical motion capture (OMC) systems are commonly used to capture in-vivo three-dimensional joint kinematics. However, the skin-based markers may not reflect the underlying bone movement, a source of error known as soft tissue artifact (STA). This study examined STA during wrist motion by evaluating the agreement between OMC and biplanar videoradiography (BVR). Nine subjects completed 7 different wrist motion tasks: doorknob rotation to capture supination and pronation, radial-ulnar deviation, flexion-extension, circumduction, hammering, and pitcher pouring. BVR and OMC captured the motion simultaneously. Wrist kinematics were quantified using helical motion parameters of rotation and translation, and Bland-Altman analysis quantified the mean difference (bias) and 95% limit of agreement (LOA). The rotational bias of doorknob pronation, a median bias of -4.9°, was significantly larger than the flexion-extension (0.7°, p < 0.05) and radial-ulnar deviation (1.8°, p < 0.01) tasks. The rotational LOA range was significantly smaller in the flexion-extension task (5.9°) compared to pitcher (11.6°, p < 0.05) and doorknob pronation (17.9°, p < 0.05) tasks. The translation bias did not differ between tasks. The translation LOA range was significantly larger in circumduction (9.8°) compared to the radial-ulnar deviation (6.3°, p < 0.05) and pitcher (3.4°, p < 0.05) tasks. While OMC technology has a wide-range of successful applications, we demonstrated it has relatively poor agreement with BVR in tracking wrist motion, and that the agreement depends on the nature and direction of wrist motion.

Biplanar Videoradiography to Study the Wrist and Distal Radioulnar Joints.

Accurate measurement of skeletal kinematics in vivo is essential for understanding normal joint function, the influence of pathology, disease progression, and the effects of treatments. Measurement systems that use skin surface markers to infer skeletal motion have provided important insight into normal and pathological kinematics, however, accurate arthrokinematics cannot be attained using these systems, especially during dynamic activities. In the past two decades, biplanar videoradiography (BVR) systems have enabled many researchers to directly study the skeletal kinematics of the joints during activities of daily living. To implement BVR systems for the distal upper extremity, videoradiographs of the distal radius and the hand are acquired from two calibrated X-ray sources while a subject performs a designated task. Three-dimensional (3D) rigid-body positions are computed from the videoradiographs via a best-fit registrations of 3D model projections onto to each BVR view. The 3D models are density-based image volumes of the specific bone derived from independently acquired computed-tomography data. Utilizing graphics processor units and high-performance computing systems, this model-based tracking approach is shown to be fast and accurate in evaluating the wrist and distal radioulnar joint biomechanics. In this study, we first summarized the previous studies that have established the submillimeter and subdegree agreement of BVR with an in vitro optical motion capture system in evaluating the wrist and distal radioulnar joint kinematics. Furthermore, we used BVR to compute the center of rotation behavior of the wrist joint, to evaluate the articulation pattern of the components of the implant upon one another, and to assess the dynamic change of ulnar variance during pronosupination of the forearm. In the future, carpal bones may be captured in greater detail with the addition of flat panel X-ray detectors, more X-ray sources (i.e., multiplanar videoradiography), or advanced computer vision algorithms.

The Effectiveness of Regulations and Behavioral Interventions on Head Impacts and Concussions in Youth, High-School, and Collegiate Football: A Systematized Review.

The purpose of this study was to assess the effectiveness of regulations and behavioral interventions on head impacts and concussions in youth, high-school, and collegiate football, using a systematic search strategy to identify relevant literature. Six databases were searched using key search terms related to three categories: football, head-injuries, and interventions. Studies that met inclusion criteria were included in the study and underwent data extraction. Twenty articles met inclusion criteria and were included in the final systematized review. Of the 20 included studies, 8 studies evaluated interventions in high-school football, 5 studies evaluated interventions in collegiate football, 6 studies evaluated interventions in youth football, and 1 study evaluated interventions in both, high-school and collegiate football. The four categories of interventions and regulations included rule changes, training, education/instruction/coaching tactical changes, and tackle football alternatives. Studies evaluating the effectiveness of interventions and regulations on reducing head impact exposures or head injuries have shown mixed results. Some regulations may be more effective than others, but methodological design and risk of bias pose limitations to generalize effects.

Proximal-distal shift of the center of rotation in a total wrist arthroplasty is more than twice of the healthy wrist.

Reproduction of healthy wrist biomechanics should minimize the abnormal joint forces that could potentially result in the failure of a total wrist arthroplasty (TWA). To date, the in vivo kinematics of TWA have not been measured and it is unknown if TWA preserves healthy wrist kinematics. Therefore, the purpose of this in vivo study was to determine the center of rotation (COR) for a current TWA design and to compare its location to the healthy wrist. The wrist COR for six patients with TWA and 10 healthy subjects were calculated using biplane videoradiography as the subjects performed various range-of-motion and functional tasks that included coupled wrist motions. An open-source registration software, Autoscoper, was used for model-based tracking and kinematics analysis. It was demonstrated that the COR was located near the centers of curvatures of the carpal component for the anatomical motions of flexion-extension and radial-ulnar deviation. When compared to healthy wrists, the COR of TWAs was located more distal in both pure radial deviation (P < .0001) and pure ulnar deviation (P = .07), while there was no difference in its location in pure flexion or extension (P = .99). Across all coupled motions, the TWA's COR shifted more than two times that of the healthy wrists in the proximal-distal direction (17.1 vs 7.2 mm). We postulate that the mismatch in the COR location and behavior may be associated with increased loading of the TWA components, leading to an increase in the risk of component and/or interface failure.