Nanoporous graphene-based thin-film microelectrodes for in vivo high-resolution neural recording and stimulation.

One of the critical factors determining the performance of neural interfaces is the electrode material used to establish electrical communication with the neural tissue, which needs to meet strict electrical, electrochemical, mechanical, biological and microfabrication compatibility requirements. This work presents a nanoporous graphene-based thin-film technology and its engineering to form flexible neural interfaces. The developed technology allows the fabrication of small microelectrodes (25 µm diameter) while achieving low impedance (∼25 kΩ) and high charge injection (3-5 mC cm-2). In vivo brain recording performance assessed in rodents reveals high-fidelity recordings (signal-to-noise ratio >10 dB for local field potentials), while stimulation performance assessed with an intrafascicular implant demonstrates low current thresholds (<100 µA) and high selectivity (>0.8) for activating subsets of axons within the rat sciatic nerve innervating tibialis anterior and plantar interosseous muscles. Furthermore, the tissue biocompatibility of the devices was validated by chronic epicortical (12 week) and intraneural (8 week) implantation. This work describes a graphene-based thin-film microelectrode technology and demonstrates its potential for high-precision and high-resolution neural interfacing.

Application of HPLC-UV combined with chemometrics for the detection and quantification of 'true cinnamon' adulteration.

Cinnamon is one of the most popular spices used in cuisines worldwide. Among its different species, Ceylon cinnamon ("true cinnamon") is the one with the most health benefits due to its high concentration in the antioxidant eugenol and the ultra-low content of the hepatotoxic compound coumarin. However, the higher price of Ceylon cinnamon makes it vulnerable to fraudulent adulteration with more economic species of cinnamon, such as Cassia and Saigon. Thus, for the detection of frauds in cinnamon samples, a HPLC-UV method was developed for the determination of 4 characteristic cinnamon compounds: eugenol, cinnamaldehyde, coumarin and cinnamic acid. The obtained data were analyzed by PLS to attain not only the authentication of cinnamon species but also the detection and quantification of partial adulterations. Several mixtures prepared in the laboratory using different cinnamon powder samples considered 'pure' Ceylon, Cassia or Saigon were tested, concluding that the proposed approach allows a clear identification of Ceylon cinnamon and a suitable quantification of the Ceylon: non-Ceylon ratio regardless of the commercial sample selected (RMSE <0.06 for both training and test sets).

Active chiral dynamics and boundary accumulation phenomenon in confined camphor particles.

In this work, we perform experimental and numerical investigations on the dynamics of camphor-infused discs, well-established as active particles in their behavior. Our analysis focuses on examining the individual dynamics of these discs within a confined circular domain, revealing that they exhibit characteristics akin to active chiral particles. To characterize this behavior effectively, we introduce a methodology for estimating key model parameter values from our experiments, including linear velocity, angular velocity, and angular noise intensity. To validate our findings, we compare our experimental results with numerical simulations of the model. Our results demonstrate a striking phenomenon associated with camphor-infused discs: a pronounced accumulation of particles along the boundary. This intriguing observation suggests the occurrence of an attractive interaction between the active particles and the boundary, resulting in a kind of adsorption effect. The latter results in the confinement of the camphor disc along the Petri dish wall, which we refer to as sliding dynamics. We empirically determine the velocity of the particle along the Petri dish wall as well as its fluctuations, properties whose behavior notably deviates from the bulk dynamics.

Trypanosoma cruzi in Mexican Neotropical vectors and mammals: wildlife, livestock, pets, and human population.

OBJECTIVE: To provide primary evidence of Trypanosoma cruzi landscape genetics in the Mexican Neotropics. MATERIALS AND METHODS: Trypanosoma cruzi and discrete typing units (DTU) prevalence were analyzed in landscape communities of vectors, wildlife, livestock, pets, and sympatric human populations using endpoint PCR and sequencing of all relevant amplicons from mitochondrial (kDNA) and nuclear (ME, 18S, 24Sα) gene markers. RESULTS: Although 98% of the infected sample-set (N=2 963) contained single or mixed infections of DTUI (TcI, 96.2%) and TcVI (22.6%), TcIV and TcII were also identified. Sensitivity of individual markers varied and was dependent on host taxon; kDNA, ME and 18S combined identified 95% of infections. ME genotyped 90% of vector infections, but 60% of mammals (36% wildlife), while neither 18S nor 24Sα typed more than 20% of mammal infections. CONCLUSION: Available gene fragments to identify or genotype T. cruzi are not universally sensitive for all landscape parasite populations, highlighting important T. cruzi heteroge- neity among mammal reservoir taxa and triatomine species.

A Complex Reaction Network Model for Spontaneous Mirror Symmetry Breaking in Viedma Deracemizations.

Attrition-enhanced chiral symmetry breaking in crystals, known as Viedma deracemization, is a promising method for converting racemic solid phases into enantiomerically pure ones under non-equilibrium conditions. However, many aspects of this process remain unclear. In this study, we present a new investigation into Viedma deracemization using a comprehensive kinetic rate equation continuous model based on classical primary nucleation theory, crystal growth, and Ostwald ripening. Our approach employs a fully microreversible kinetic scheme with a size-dependent solubility following the Gibbs-Thomson rule. To validate our model, we use data from a real NaClO3 deracemization experiment. After parametrization, the model shows spontaneous mirror symmetry breaking (SMSB) under grinding. Additionally, we identify a bifurcation scenario with a lower and upper limit of the grinding intensity that leads to deracemization, including a minimum deracemization time within this window. Furthermore, this model uncovers that SMSB is caused by multiple instances of concealed high-order autocatalysis. Our findings provide new insights into attrition-enhanced deracemization and its potential applications in chiral molecule synthesis and understanding biological homochirality.

Effect of a Biosurfactant Extract Obtained from a Corn Kernel Fermented Stream on the Sensory Colour Properties of Apple and Orange Juices.

In this work, we assessed the effect of a biosurfactant extract, which possesses preservative properties, on the sensory properties, regarding colour, of two fruit juices: pasteurized apple juice and natural orange juice. This biosurfactant extract was obtained from corn steep liquor, a secondary stream of the corn wet-milling industry. The biosurfactant extract is composed of natural polymers and biocompounds released during the spontaneous fermentation of corn kernels during the steeping process of corn. The reason for this study is based on the importance of colour as a visual attribute that can determine the consumer's preferences; it is important to study the effect of the biosurfactant extract under evaluation before including it in juice matrices. For this, a surface response factorial design was employed and the effects of the biosurfactant extract concentration (0-1 g/L), the storage time (1-7 days), and the conservation temperature (4-36 °C) on the CIELAB colour parameters (L*, a*, b*) of the juice matrices were evaluated, as well as the total colour differences (ΔE*) regarding the control juices and the saturation index (Cab*). Moreover, the CIELAB coordinates of each conducted treatment were converted into RGB values to obtain visual colour differences that can be appreciated by testers or consumers.

Effect of a Multifunctional Biosurfactant Extract Obtained from Corn Steep Liquor on Orange and Apple Juices.

Biosurfactant extracts are multifunctional ingredients composed of natural polymers that can be used in the food industry as stabilizing and antimicrobial agents, although their inclusion in food matrices has been scarcely explored. In this work, a biosurfactant extract, with antimicrobial properties, obtained from a fermented stream of the corn wet-milling industry was introduced into an apple and orange juice matrix to evaluate the changes produced in the sugar consumption, pH, and biomass formation at different temperatures (4-36 °C) and storage time (1-7 days). It was observed that the addition of biosurfactant extract reduced the hydrolysis rate of polymeric sugars, decreasing the concentration of soluble sugars from 85.4 g/L to 49.0 g/L in apple juice after 7 days at 20 °C in the absence and presence of biosurfactant extract, respectively. In general, soluble sugars increased in juices for 5-6 days and after those sugars decreased at different rates depending on the temperature of storage. Differences in sugar solubilization and degradation were more significant in apple juice than in orange juice at 20 °C and 7 days of storage, achieving for orange juice values of 101 and 102 g/L in the absence and presence of biosurfactant extract, respectively. Biomass growth was almost unaffected by the biosurfactant extract concentration and the optimal conditions for biomass production were detected at intermediated temperatures after 6-7 days of storage for both apple and orange juices, obtaining maximum concentrations of 1.68 g/L and 1.54 g/L for apple juice and orange juice, respectively, in the absence of biosurfactant extract. The pH during storage was kept in the range of 3.35-3.48 for apple juice and of 3.40-3.77 for orange juice.

Modes of synchrony in self-propelled pentanol drops.

We report various modes of synchrony observed for a population of two, three and four pentanol drops in a rectangular channel at the air-water interface. Initially, the autonomous oscillations of a single 1-pentanol drop were studied in a ferroin DI water solution pre-mixed with some volume of pentanol. A pentanol drop performs continuous motion on the air-water interface due to Marangoni forces. A linear channel was prepared to study the uniaxial movement of the drop(s). Thereafter, a systematic study of the self-propelled motion of a 1-pentanol drop was reported as a function of the drop volume. Subsequently, the coupled dynamics were studied for two, three and four drops, respectively. We observed anti-phase oscillations in a pair of pentanol drops. In the case of three drops, relay synchronization was observed, wherein consecutive pairs of drops were exhibiting out-of-phase oscillations and alternate drops were performing in-phase oscillations. Four pentanol drops showed two different modes of synchrony: one was relay synchrony and the other was out-of-phase oscillations between two pairs of drops (within a pair, the drops exhibit in-phase oscillations).

A hybrid sensing system combining simultaneous optical and electrochemical measurements: Application to beer discrimination.

A hybrid sensing system, which combines simultaneous cyclic voltammetric (CV) and UV-vis absorbance measurements using a commercial carbon screen-printed electrode and a set of optical fibres in disposable cuvettes, is proposed. The hybrid system approach was applied to 27 samples of recognized beer brands, improving the classification power as compared to only voltammetric or only spectrophotometric measurements. The developed partial least squares discriminant analysis (PLS-DA) model was able to discriminate between five types of beer (lager, marzen, black/stout, alcohol-free and white/ale). The model was also successfully applied to 28 beer samples of white-label brands sold in local supermarkets, demonstrating their similarity to recognized brand beers.

Enhanced voltammetric performance of sensors based on oxidized 2D layered black phosphorus.

The exceptional properties of 2D layered black phosphorus (BP) make it a promising candidate for electrochemical sensing applications and, even though BP is considered unstable and tends to degrade by the presence of oxygen and moisture, its oxidation can be beneficial in some situations. In this work, we present an unequivocal demonstration that the exposition of BP-based working electrodes to normal ambient conditions can indeed be advantageous, leading to an enhancement of voltammetric sensing applications. This point was proved using a BP modified screen-printed carbon electrode (BP-SPCE) for the voltammetric determination of dopamine (DA) as a model target analyte. Oxidized BP-SPCE (up to 35% of PxOy at the surface) presented an enhanced analytical performance with a 5-fold and 2-fold increase in sensitivity, as compared to bare-SPCE and non-oxidized BP-SPCE stored in anhydrous atmosphere, respectively. Good detection limit, repeatability, reproducibility, stability, selectivity, and accuracy were also achieved. Overall, the results presented herein display the prominent possibilities of preparing and working with BP based-sensors in normal ambient settings and showcase their implementation under physiological conditions.

Vibrating boron-doped diamond electrode: A new, durable and highly sensitive tool for the detection of cadmium.

In this paper, a vibrating boron-doped diamond (BDD) electrode electroanalytical device and respective method for the analysis of ultralow concentrations of Cd(II) in water were studied. The enhanced mass transfer on the electrode surface was studied using Ru(NH3)6Cl3. Vibration with 133 Hz frequency enhanced the Ru(III) to Ru(II) reduction by 92.6% compared to a static electrode. The peak current of the anodic stripping voltammetry (ASV) method employed was increased by a factor of 5.3 and 4.7 for 10 and 30 µg L-1 Cd(II) concentrations, respectively, when a frequency of 200 Hz was used. A calibration plot with two linear regions was resolved between 0.01 and 1 µg L-1 and 1-30 µg L-1 with the LOD and LOQ of 0.04 µg L-1 and 0.12 µg L-1, respectively. The applicability of the device and the respective method in the analysis of real environmental samples was successfully verified by analysis of river samples and comparing the results with the ICP analysis presenting high reproducibility and trueness. According to the results of this research, the vibrating BDD electrode with the ASV method has excellent analytical performance without surface modification or regular replacement or polishing of the electrode surface. Combining the exceptional electrochemical and chemical properties of BDD with enhanced mass transfer and signal strength of vibrating electrodes makes the system especially suitable for on-site and online analysis of heavy metals.

Correction: López-Prieto et al. Fungistatic and Fungicidal Capacity of a Biosurfactant Extract Obtained from Corn Steep Water. Foods 2020, 9, 662.

The authors would like to make the following correction to the published paper [1]: a few words should be corrected in the abstract, pages 7 and 9 [...].

Spontaneous Deracemizations.

Spontaneous deracemizations is a challenging, multidisciplinary subject in current chirality research. In the absence of any chiral inductors, an achiral substance or a racemic composition is driven into an enantioenriched or even homochiral state through a selective energy input, e.g., chemical potential, photoirradiation, mechanical grinding, ultrasound waves, thermal gradients, etc. The most prominent examples of such transformations are the Soai reaction and the Viedma deracemization. In this review, we track the most recent developments in this topic and recall that many other deracemizations have been reported for solutions from mesophases to conglomerate crystallizations. A compiled set of simply available achiral organic, inorganic, organometallic, and MOF compounds, yielding conglomerate crystals, should give the impetus to realize new experiments on spontaneous deracemizations. Taking into account thermodynamic constraints, modeling efforts have shown that structural features alone are not sufficient to describe spontaneous deracemizations. As a guideline of this review, particular attention is paid to the physicochemical origin and symmetry requirements of such processes.

Characterization of extracellular and cell bound biosurfactants produced by Aneurinibacillus aneurinilyticus isolated from commercial corn steep liquor.

The presence of biosurfactants produced by a Bacillus strain in corn steep liquor (CSL), a wastewater stream of the corn milling process, has been recently discovered. However, the species responsible for their production has not been identified at the moment. Therefore, in this work, the Bacillus strain isolated from CSL, with capacity to produce biosurfactants, was subjected to amplification and sequence analysis of the 16S rRNA, being identified as Aneurinibacillus aneurinilyticus. This strain has been proved to be endospore forming and thermophile, what would explain its presence in the commercial CSL. It was observed that the strain under evaluation has the ability to produce both cell-bound and extracellular biosurfactant extracts, which were characterized in this work. The electrospray ionization mass spectrometry (ESI) analysis of the biosurfactant extracts revealed that the extracellular biosurfactant produced by Aneurinibacillus aneurinilyticus is composed by a mixture of lipopeptides, containing C16 and C18 fatty acids and amino acids, including valine, phenylalanine, proline, cysteine, histidine, aspartic acid/asparagine, alanine, glycine, leucine/isoleucine, with biomarkers between 1025-458 m/z. Conversely, the cell-bound biosurfactant extract produced by Aneurinibacillus aneurinilyticus was composed by the cyclic decapeptide gramicidin S, with a characteristic peak at 571 m/z, and lipopeptides with characteristic peaks between 1034-705 m/z, containing alanine, glycine, cysteine, serine, proline, aspartic acid/asparagine, similarly to the amino acid sequence of the extracellular biosurfactant extract.

Characterization and Cytotoxic Effect of Biosurfactants Obtained from Different Sources.

In this work, five biosurfactant extracts, obtained from different sources, all of them with demonstrated antimicrobial properties, were characterized and subjected to a cytotoxic study using mouse fibroblast cells (NCTC clone 929). Biosurfactant extracts obtained directly from corn steep water (CSW) showed similar surfactant characteristics to those of the extracellular biosurfactant extract produced by Bacillus isolated from CSW and grown in tryptic soy broth, observing that they are amphoteric, consisting of viscous and yellowish liquid with no foaming capacity. Contrarily, cell-bound biosurfactant extracts produced from Lactobacillus pentosus or produced by Bacillus sp isolated from CSW are nonionic, consisting of a white powder with foaming capacity. All the biosurfactants possess a similar fatty acid composition. The cytotoxic test revealed that the extracts under evaluation, at a concentration of 1 g/L, were not cytotoxic for fibroblasts (fibroblast growth > 90%). The biosurfactant extract obtained from CSW with ethyl acetate, at 1 g/L, showed the highest cytotoxic effect but above the cytotoxicity limit established by the UNE-EN-ISO10993-5. It is remarkable that the cell-bound biosurfactant produced by L. pentosus, at a concentration of 1 g/L, promoted the growth of the fibroblast up to 113%.

Electroanalysis from the past to the twenty-first century: challenges and perspectives.

A personal mini-review is presented on the history of electroanalysis and on their present achievements and future challenges. The manuscript is written from the subjective view of two generations of electroanalytical chemists that have witnessed for many years the evolution of this discipline.

Fungistatic and Fungicidal Capacity of a Biosurfactant Extract Obtained from Corn Steep Water.

Biosurfactants are surface-active compounds that are produced by microorganisms, which in addition to their surfactant capacity, can possess interesting antimicrobial activities that are used in their incorporation into the agrifood industry. In this work, the preservative capacity of a novel biosurfactant extract obtained from a residual stream of the corn-milling industry was evaluated against two different fungi (Aspergillus brasiliensis and Candida albicans) under different biosurfactant concentrations (0.33-0.99 mg/mL), temperatures (4-40 °C), and incubation times (5-11 days). All the assays started with the same concentration of fungi (2 × 106 CFU/mL). The results showed that temperature played an important role in the bactericidal and fungistatic effects of this biosurfactant extract. It was observed that at a low biosurfactant concentration (0.33 mg/mL) and low or high temperatures in the range tested, this biosurfactant extract possessed an important fungicidal effect (complete inhibition) on A. brasiliensis, while at intermediate temperatures, it achieved a fungistatic effect (50% of inhibition). Regarding C. albicans, it was observed that this strain was more resistant than A. brasiliens, although it was possible to achieve growth inhibitions of 76.3% at temperatures of 40 °C after 8 days of incubation with a biosurfactant concentration of 0.99 mg/mL. This work supports the possible application of biosurfactants extracted from corn steep water as preservatives and antimicrobial agents against fungal contaminations on agrifood products.

Screen-Printed Electrodes for the Voltammetric Sensing of Benzotriazoles in Water.

Benzotriazoles (BZTs) are high production volume industrial chemicals that are used in various applications such as corrosion inhibitors, antifreeze agents, and UV radiation stabilizers. Given their potential ecotoxicological implications for different ecosystems and in human health, as well as their poor biodegradability, they are of increasing concern. In this study, a new voltammetric method using commercial screen-printed electrodes (SPEs) has been developed for the sensing of BZTs in water samples to help in their environmental monitoring. To this end, different types of SPEs based on carbon nanoallotropes and copper were tested under several experimental conditions to determine the two BZTs most frequently detected in the environment: 1H-benzotriazole (BZT) and 5-methyl-1H-benzotriazole (Me-BZT, tolyltriazole) as model compounds for BZTs. Carbon nanofibers electrodes exhibited the best performance, allowing detection limits as low as 0.4 mg L-1 for both BZTs, with repeatability and reproducibility of ca. 5%. The applicability of the method was tested through the determination of BZT in spiked drinking water samples, suggesting its suitability for the sensing of samples heavily polluted with BZTs.

Effectiveness of a Multifactorial Intervention in the First 1000 Days of Life to Prevent Obesity and Overweight in Childhood: Study Protocol.

(1) Background: Obesity is a global health problem, and its prevention must be a priority goal of public health, especially considering the seriousness of the problem among children. It is known that fetal and early postnatal environments may favor the appearance of obesity in later life. In recent years, the impact of the programs to prevent obesity in childhood has been scarce. The aim of this research is to evaluate the effectiveness of an intervention based on the concept of early programming. (2) Methods: Non-randomized controlled trial design. Inclusion criteria are: two-year-old infants whose gestational period begins in the 14 months following the start of the intervention, and whose mothers have made the complete follow-up of their pregnancy in the same clinical unit of the study. The intervention will be developed over all the known factors that affect early programming, during pregnancy up to 2 years of life. Data will be collected through a data collection sheet by the paediatricians. A unibivariate and multivariate analysis of the data will be carried out. (3) Ethics and dissemination: The trial does not involve any risk to participants and their offspring. Signed informed consent is obtained from all participants. Ethical approval has been obtained. (4) Results: It is expected that this study will provide evidence on the importance of the prevention of obesity from the critical period of the first 1000 days of life, being able to establish this as a standard intervention in primary care.

An elegant technology for ultrasensitive impedimetric and voltammetric determination of cholestanol based on a novel molecularly imprinted electrochemical sensor.

In this work, a novel molecularly imprinted electrochemical sensor (MIES) has been fabricated based on electropolymerization of a molecularly imprinted polymer (MIP) onto a glassy carbon electrode (GCE) modified with gold-palladium alloy nanoparticles (AuPd NPs)/polydopamine film (PDA)/multiwalled carbon nanotubes-chitosan-ionic liquid (MWCNTs-CS-IL) for voltammetric and impedimetric determination of cholestanol (CHO). Modifications applied to the bare GCE formed an excellent biocompatible composite film which was able to selectively detect CHO molecules. Modifications applied to the bare GCE were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (SEM). Under optimal experimental conditions, the sensor was able to detect CHO in the range of 0.1-60 pM and 1-50 pM by EIS and DPV, respectively. Moreover, the sensor showed high sensitivity, selectivity, repeatability, reproducibility, low interference and good stability towards CHO determination. Our records confirmed that the sensor was successfully able to the analysis real samples for determination of CHO.