Determining the Aethalometer multiple scattering enhancement factor C from the filter loading parameter.

Light-absorbing aerosols heat the atmosphere; an accurate quantification of their absorption coefficient is mandatory. However, standard reference instruments (CAPS, MAAP, PAX, PTAAM) are not always available at each measuring site around the world. By integrating all previous published studies concerning the Aethalometers, the AE33 filter loading parameter, provided by the dual-spot algorithm, were used to determine the multiple scattering enhancement factor from the Aethalometer itself (hereinafter CAE) on an yearly and a monthly basis. The method was developed in Milan, where Aethalometer measurements were compared with MAAP data; the comparison showed a good agreement in terms of equivalent black carbon (R2 = 0.93; slope = 1.02 and a negligible intercept = 0.12 µg m-3) leading to a yearly experimental multiple scattering enhancement factor of 2.51 ± 0.04 (hereinafter CMAAP). On a yearly time base the CAE values obtained using the new approach was 2.52 ± 0.01, corresponding to the experimental one (CMAAP). Considering the seasonal behavior, higher experimental CMAAP and computed CAE values were found in summer (2.83 ± 0.12) whereas, the lower ones in winter/early-spring (2.37 ± 0.03), in agreement with the single scattering albedo behavior in the Po Valley. Overall, the agreement between the experimental CMAAP and CAE showed a root mean squared error (RMSE) of just 0.038 on the CMAAP prediction, characterized by a slope close to 1 (1.001 ± 0.178), a negligible intercept (-0.002 ± 0.455) and a high degree of correlation (R2 = 0.955). From an environmental point of view, the application of a dynamic (space/time) determination of CAE increases the accuracy of the aerosol heating rate (compared to applying a fixed C value) up to 16 % solely in Milan, and to 114 % when applied in the Arctic at 80°N.

Aerosol source apportionment uncertainty linked to the choice of input chemical components.

For a Positive Matrix Factorization (PMF) aerosol source apportionment (SA) studies there is no standard procedure to select the most appropriate chemical components to be included in the input dataset for a given site typology, nor specific recommendations in this direction. However, these choices are crucial for the final SA outputs not only in terms of number of sources identified but also, and consequently, in the source contributions estimates. In fact, PMF tends to reproduce most of PM mass measured independently and introduced as a total variable in the input data, regardless of the percentage of PM mass which has been chemically characterized, so that the lack of some specific source tracers (e.g. levoglucosan) can potentially affect the results of the whole source apportionment study. The present study elaborates further on the same concept, evaluating quantitatively the impact of lacking specific sources' tracers on the whole source apportionment, both in terms of identified sources and source contributions. This work aims to provide first recommendations on the most suitable and critical components to be included in PMF analyses in order to reduce PMF output uncertainty as much as possible, and better represent the most commons PM sources observed in many sites in Western countries. To this aim, we performed three sensitivity analyses on three different datasets across EU, including extended sets of organic tracers, in order to cover different types of urban conditions (Mediterranean, Continental, and Alpine), source types, and PM fractions. Our findings reveal that the vehicle exhaust source resulted to be less sensitive to the choice of analytes, although source contributions estimates can deviate significantly up to 44 %. On the other hand, for the detection of the non-exhaust one is clearly necessary to analyze specific inorganic elements. The choice of not analysing non-polar organics likely causes the loss of separation of exhaust and non-exhaust factors, thus obtaining a unique road traffic source, which provokes a significant bias of total contribution. Levoglucosan was, in most cases, crucial to identify biomass burning contributions in Milan and in Barcelona, in spite of the presence of PAHs in Barcelona, while for the case of Grenoble, even discarding levoglucosan, the presence of PAHs allowed identifying the BB factor. Modifying the rest of analytes provoke a systematic underestimation of biomass burning source contributions. SIA factors resulted to be generally overestimated with respect to the base case analysis, also in the case that ions were not included in the PMF analysis. Trace elements were crucial to identify shipping emissions (V and Ni) and industrial sources (Pb, Ni, Br, Zn, Mn, Cd and As). When changing the rest of input variables, the uncertainty was narrow for shipping but large for industrial processes. Major and trace elements were also crucial to identify the mineral/soil factor at all cities. Biogenic SOA and Anthropogenic SOA factors were sensitive to the presence of their molecular tracers, since the availability of OC alone is unable to separate a SOA factor. Arabitol and sorbitol were crucial to detecting fungal spores while odd number of higher alkanes (C27 to C31) for plant debris.

Spatial and temporal variability of carbonaceous aerosols: Assessing the impact of biomass burning in the urban environment.

Biomass burning (BB) is a significant source of atmospheric particles in many parts of the world. Whereas many studies have demonstrated the importance of BB emissions in central and northern Europe, especially in rural areas, its impact in urban air quality of southern European countries has been sparsely investigated. In this study, highly time resolved multi-wavelength absorption coefficients together with levoglucosan (BB tracer) mass concentrations were combined to apportion carbonaceous aerosol sources. The Aethalometer model takes advantage of the different spectral behavior of BB and fossil fuel (FF) combustion aerosols. The model was found to be more sensitive to the assumed value of the aerosol Ångström exponent (AAE) for FF (AAEff) than to the AAE for BB (AAEbb). As result of various sensitivity tests the model was optimized with AAEff=1.1 and AAEbb=2. The Aethalometer model and levoglucosan tracer estimates were in good agreement. The Aethalometer model was further applied to data from three sites in Granada urban area to evaluate the spatial variation of CMff and CMbb (carbonaceous matter from FF or BB origin, respectively) concentrations within the city. The results showed that CMbb was lower in the city centre while it has an unexpected profound impact on the CM levels measured in the suburbs (about 40%). Analysis of BB tracers with respect to wind speed suggested that BB was dominated by sources outside the city, to the west in a rural area. Distinguishing whether it corresponds to agricultural waste burning or with biomass burning for domestic heating was not possible. This study also shows that although traffic restrictions measures contribute to reduce carbonaceous concentrations, the extent of the reduction is very local. Other sources such as BB, which can contribute to CM as much as traffic emissions, should be targeted to reduce air pollution.

[Peripartum dilatative cardiomyopathy. Case report with literature review]. / La cardiomiopatia dilatativa peripartum. Messa a punto e descrizione di un caso clinico.

Peripartum cardiomyopathy (PPCM) is a rare form of heart failure affecting women in the last month of pregnancy or the first six months post-partum. The etiology of PPCM remains poorly understood although some risk factors were described. Diagnosis is often difficult and is always necessary to exclude other prior heart disease and other cause of left ventricular dysfunction in pregnancy. Medical therapy for PPCM is similar to that for other forms of congestive heart failure; prognosis is better than in idiopathic cardiomyopathy but many authors observed that women who have had one episode of PPCM are likely to have recurrences in subsequent pregnancies. The present report describes the case of a woman presenting with severe cardiac failure immediately after cesarean section for twin pregnancy. The patient is a 35-year-old nulliparous white woman, with history of anorexia, subsequent amenorrhea, sterility and pregnancy induced with Gn-Rh. The diagnosis of PPCM was difficult for the presence of preeclampsia and acute pulmonary edema occurred four hours after delivery. The successful outcome was possible with an intensive treatment (mechanical ventilation, Swan-Ganz catheter). The whole resolution of the heart failure, six months post-partum, was demonstrated by ultrasonography.