A cellulosomal double-dockerin module from Clostridium thermocellum shows distinct structural and cohesin-binding features.

Cellulosomes are intricate cellulose-degrading multi-enzymatic complexes produced by anaerobic bacteria, which are valuable for bioenergy development and biotechnology. Cellulosome assembly relies on the selective interaction between cohesin modules in structural scaffolding proteins (scaffoldins) and dockerin modules in enzymes. Although the number of tandem cohesins in the scaffoldins is believed to determine the complexity of the cellulosomes, tandem dockerins also exist, albeit very rare, in some cellulosomal components whose assembly and functional roles are currently unclear. In this study, we characterized the structure and mode of assembly of a tandem bimodular double-dockerin, which is connected to a putative S8 protease in the cellulosome-producing bacterium, Clostridium thermocellum. Crystal and NMR structures of the double-dockerin revealed two typical type I dockerin folds with significant interactions between them. Interaction analysis by isothermal titration calorimetry and NMR titration experiments revealed that the double-dockerin displays a preference for binding to the cell-wall anchoring scaffoldin ScaD through the first dockerin with a canonical dual-binding mode, while the second dockerin module was unable to bind to any of the tested cohesins. Surprisingly, the double-dockerin showed a much higher affinity to a cohesin from the CipC scaffoldin of Clostridium cellulolyticum than to the resident cohesins from C. thermocellum. These results contribute valuable insights into the structure and assembly of the double-dockerin module, and provide the basis for further functional studies on multiple-dockerin modules and cellulosomal proteases, thus highlighting the complexity and diversity of cellulosomal components.

Deciphering the stereo-specific catalytic mechanisms of cis-epoxysuccinate hydrolases producing L(+)-tartaric acid.

Microbial epoxide hydrolases, cis-epoxysuccinate hydrolases (CESHs), have been utilized for commercial production of enantiomerically pure L(+)- and D(-)-tartaric acids for decades. However, the stereo-catalytic mechanism of CESH producing L(+)-tartaric acid (CESH[L]) remains unclear. Herein, the crystal structures of two CESH[L]s in ligand-free, product-complexed, and catalytic intermediate forms were determined. These structures revealed the unique specific binding mode for the mirror-symmetric substrate, an active catalytic triad consisting of Asp-His-Glu, and an arginine providing a proton to the oxirane oxygen to facilitate the epoxide ring-opening reaction, which has been pursued for decades. These results provide the structural basis for the rational engineering of these industrial biocatalysts.

Structure of the transcription open complex of distinct σI factors.

Bacterial σI factors of the σ70-family are widespread in Bacilli and Clostridia and are involved in the heat shock response, iron metabolism, virulence, and carbohydrate sensing. A multiplicity of σI paralogues in some cellulolytic bacteria have been shown to be responsible for the regulation of the cellulosome, a multienzyme complex that mediates efficient cellulose degradation. Here, we report two structures at 3.0 Å and 3.3 Å of two transcription open complexes formed by two σI factors, SigI1 and SigI6, respectively, from the thermophilic, cellulolytic bacterium, Clostridium thermocellum. These structures reveal a unique, hitherto-unknown recognition mode of bacterial transcriptional promoters, both with respect to domain organization and binding to promoter DNA. The key characteristics that determine the specificities of the σI paralogues were further revealed by comparison of the two structures. Consequently, the σI factors represent a distinct set of the σ70-family σ factors, thus highlighting the diversity of bacterial transcription.

A phospholipid:diacylglycerol acyltransferase is involved in the regulation of phospholipids homeostasis in oleaginous Aurantiochytrium sp.

BACKGROUND: Thraustochytrids have gained attention as a potential source for the production of docosahexaenoic acid (DHA), where DHA is predominantly stored in the form of triacylglycerol (TAG). The TAG biosynthesis pathways, including the acyl-CoA-dependent Kennedy pathway and the acyl-CoA-independent pathway, have been predicted in thraustochytrids, while the specific details regarding their roles are currently uncertain. RESULTS: Phospholipid:diacylglycerol acyltransferase (PDAT) plays a key role in the acyl-CoA-independent pathway by transferring acyl-group from phospholipids (PL) to diacylglycerol (DAG) to from TAG. In thraustochytrid Aurantiochytrium sp. SD116, an active AuPDAT was confirmed by heterologous expression in a TAG-deficient yeast strain H1246. Analysis of AuPDAT function in vivo revealed that deletion of AuPDAT led to slow growth and a significant decrease in cell number, but improved PL content in the single cell during the cell growth and lipid accumulation phases. Interestingly, deletion of AuPDAT did not affect total lipid and TAG content, but both were significantly increased within a single cell. Moreover, overexpression of AuPDAT also resulted in a decrease in cell number, while the total lipid and cell diameter of a single cell were markedly increased. Altogether, both up-regulation and down-regulation of AuPDAT expression affected the cell number, which further associated with the total lipid and TAG content in a single cell. CONCLUSIONS: Our study demonstrates that AuPDAT-mediated pathway play a minor role in TAG synthesis, and that the function of AuPDAT may be involved in regulating PL homeostasis by converting PL to TAG in a controlled manner. These findings expand our understanding of lipid biosynthesis in Aurantiochytrium sp. and open new avenues for developing "customized cell factory" for lipid production.

Fabrication of cationic cellulose nanofibrils/sodium alginate beads for Congo red removal.

Congo red is hard to remove from dye wastewater due to its structure stability and high chemical oxygen demand. In this study, cationic cellulose nanofibrils (CCNF) prepared from herb residues was physically crosslinked with sodium alginate (SA) in the presence of calcium ions, and the obtained CCNF/SA beads were used to adsorb Congo red. Results showed that CCNF/SA beads with porous internal structure were beneficial to adsorption. The maximum adsorption capacity of Congo red could reach to 518.4 mg/g, which was superior to most cellulose-based adsorption materials. Furthermore, the equilibrium adsorption isotherms and XPS analysis indicated the adsorption for Congo red was a physical process, and hydrogen bond and electrostatic adsorption were proposed as dominant adsorption mechanism. In addition, the Congo red removal efficiency of the beads was still higher than 70% after three cycles. Therefore, this high efficiency and green beads have great potential as adsorbents for anionic dyes removal.

Prediction of postoperative health-related quality of life among patients with metastatic spinal cord compression secondary to lung cancer.

Background: Health-related quality of life (HRQoL) is a critical aspect of overall well-being for patients with lung cancer, particularly those with metastatic spinal cord compression (MSCC). However, there is currently a lack of universal evaluation of HRQoL in this specific patient population. The aim of this study was to develop a nomogram that can accurately predict HRQoL outcomes in patients with lung cancer-related MSCC. Methods: A total of 119 patients diagnosed with MSCC secondary to lung cancer were prospectively collected for analysis in the study. The least absolute shrinkage and selection operator (LASSO) regression analysis, along with 10-fold cross-validation, was employed to select the most significant variables for inclusion in the nomogram. Discriminative and calibration abilities were assessed using the concordance index (C-index), discrimination slope, calibration plots, and goodness-of-fit tests. Net reclassification index (NRI) and integrated discrimination improvement (IDI) analyses were conducted to compare the nomogram's performance with and without the consideration of comorbidities. Results: Four variables were selected to construct the final nomogram, including the Eastern Cooperative Oncology Group (ECOG) score, targeted therapy, anxiety scale, and number of comorbidities. The C-index was 0.87, with a discrimination slope of 0.47, indicating a favorable discriminative ability. Calibration plots and goodness-of-fit tests revealed a high level of consistency between the predicted and observed probabilities of poor HRQoL. The NRI (0.404, 95% CI: 0.074-0.734, p = 0.016) and the IDI (0.035, 95% CI: 0.004-0.066, p = 0.027) confirmed the superior performance of the nomogram with the consideration of comorbidities. Conclusions: This study develops a prediction nomogram that can assist clinicians in evaluating postoperative HRQoL in patients with lung cancer-related MSCC. This nomogram provides a valuable tool for risk stratification and personalized treatment planning in this specific patient population.

Structural insight into why S-linked glycosylation cannot adequately mimic the role of natural O-glycosylation.

There is an increasing interest in using S-glycosylation as a replacement for the more commonly occurring O-glycosylation, aiming to enhance the resistance of glycans against chemical hydrolysis and enzymatic degradation. However, previous studies have demonstrated that these two types of glycosylation exert distinct effects on protein properties and functions. In order to elucidate the structural basis behind the observed differences, we conducted a systematic and comparative analysis of 6 differently glycosylated forms of a model glycoprotein, CBM, using NMR spectroscopy and molecular dynamic simulations. Our findings revealed that the different stabilizing effects of S- and O-glycosylation could be attributed to altered hydrogen-bonding capability between the glycan and the polypeptide chain, and their diverse impacts on binding affinity could be elucidated by examining the interactions and motion dynamics of glycans in substrate-bound states. Overall, this study underscores the pivotal role of the glycosidic linkage in shaping the function of glycosylation and advises caution when switching glycosylation types in protein glycoengineering.

Bioinspired, Robust, and Absorbable Cellulose Nanofibrils/Chitosan Filament with Remarkable Cytocompatibility and Wound Healing Properties.

Surgical threads are of great importance to prevent wound infection and accelerate tissue healing in surgical treatment. Cellulose nanofibrils (CNF) and chitosan (CS) are attracting increasing attention to be employed as biomedicine materials due to their nontoxicity, cytocompatibility, and biodegradability. However, a robust and absorbable cellulose-based surgical thread has not been explored. Therefore, in this work, a bioinspired CNF/CS composite thread containing 5% cationic polyacrylamide (CPAM) by the mass of CS was prepared, and the obtained CNF/CS-5C thread exhibited excellent mechanical properties and low swelling ratio in water due to the high cross-link degree. Especially, the tensile strength (1877 ± 107 MPa) of this thread was much higher than that of most reported CNF-based threads. Meanwhile, compared with commercial silk and Vicryl surgical threads, the CNF/CS-5C thread exhibited better in vitro cytocompatibility toward endothelial and fibroblast cells and lower inflammatory response in vivo to subcutaneous tissues of rats. In addition, the obtained thread could be regarded as a promising absorbable suture, which exhibited excellent wound healing performances in vivo. Therefore, the prepared absorbable thread will open a new window to prepare novel and advanced cellulose-based threads for medical applications.

Modular Metabolic Engineering of Mortierella alpina by the 2A Peptide Platform to Improve Arachidonic Acid Production.

Arachidonic acid (ARA) is an essential fatty acid in human nutrition. Mortierella alpina, a filamentous fungus, has been widely used for the production of ARA. Here, we report a modular engineering approach that systematically eliminates metabolic bottlenecks in the multigene elongase/desaturase pathway and has led to significant improvements of the ARA titer. The elongase/desaturase pathway in Mortierella alpina was recast into two modules, namely, push and pull modules, based on its function in the ARA synthesis. Combinatorial optimization of these two modules has balanced the production and consumption of intermediate metabolites. A 2A peptide-based facile assembly platform that can achieve multigene expression as a polycistron was first established. The platform was then applied to express the push and pull modules in Mortierella alpina. In the shake-flask fermentation, the lipid and ARA contents of the engineered strain MA5 were increased by 1.2-fold and 77.6%, respectively, resulting in about fivefold increase of the ARA yield. The final ARA titer reached 4.4 g L-1 in shake-flask fermentation. The modular engineering strategies presented in this study demonstrate a generalized approach for the engineering of cell factories in the production of valuable metabolites.

Key roles of ß-glucosidase BglA for the catabolism of both laminaribiose and cellobiose in the lignocellulolytic bacterium Clostridium thermocellum.

The thermophilic bacterium Clostridium thermocellum efficiently degrades polysaccharides into oligosaccharides. The metabolism of ß-1,4-linked cello-oligosaccharides is initiated by three enzymes, i.e., the cellodextrin phosphorylase (Cdp), the cellobiose phosphorylase (Cbp), and the ß-glucosidase A (BglA), in C. thermocellum. In comparison, how the oligosaccharides containing other kinds of linkage are utilized is rarely understood. In this study, we found that BglA could hydrolyze the ß-1,3-disaccharide laminaribiose with much higher activity than that against the ß-1,4-disaccharide cellobiose. The structural basis of the substrate specificity was analyzed by crystal structure determination and molecular docking. Genetic deletions of BglA and Cbp, respectively, and enzymatic analysis of cell extracts demonstrated that BglA is the key enzyme responsible for laminaribiose metabolism. Furthermore, the deletion of BglA can suppress the expression of Cbp and the deletion of Cbp can up-regulate the expression of BglA, indicating that BglA and Cbp have cross-regulation and BglA is also critical for cellobiose metabolism. These insights pave the way for both a fundamental understanding of metabolism and regulation in C. thermocellum and emphasize the importance of the degradation and utilization of polysaccharides containing ß-1,3-linked glycosidic bonds in lignocellulose biorefinery.

Artificial Small Molecules as Cofactors and Biomacromolecular Building Blocks in Synthetic Biology: Design, Synthesis, Applications, and Challenges.

Enzymes are essential catalysts for various chemical reactions in biological systems and often rely on metal ions or cofactors to stabilize their structure or perform functions. Improving enzyme performance has always been an important direction of protein engineering. In recent years, various artificial small molecules have been successfully used in enzyme engineering. The types of enzymatic reactions and metabolic pathways in cells can be expanded by the incorporation of these artificial small molecules either as cofactors or as building blocks of proteins and nucleic acids, which greatly promotes the development and application of biotechnology. In this review, we summarized research on artificial small molecules including biological metal cluster mimics, coenzyme analogs (mNADs), designer cofactors, non-natural nucleotides (XNAs), and non-natural amino acids (nnAAs), focusing on their design, synthesis, and applications as well as the current challenges in synthetic biology.

Essential autoproteolysis of bacterial anti-σ factor RsgI for transmembrane signal transduction.

Autoproteolysis has been discovered to play key roles in various biological processes, but functional autoproteolysis has been rarely reported for transmembrane signaling in prokaryotes. In this study, an autoproteolytic effect was discovered in the conserved periplasmic domain of anti-σ factor RsgIs from Clostridium thermocellum, which was found to transmit extracellular polysaccharide-sensing signals into cells for regulation of the cellulosome system, a polysaccharide-degrading multienzyme complex. Crystal and NMR structures of periplasmic domains from three RsgIs demonstrated that they are different from all known proteins that undergo autoproteolysis. The RsgI-based autocleavage site was located at a conserved Asn-Pro motif between the ß1 and ß2 strands in the periplasmic domain. This cleavage was demonstrated to be essential for subsequent regulated intramembrane proteolysis to activate the cognate SigI, in a manner similar to that of autoproteolysis-dependent activation of eukaryotic adhesion G protein-coupled receptors. These results indicate the presence of a unique prevalent type of autoproteolytic phenomenon in bacteria for signal transduction.

Integrated lactic acid production from lignocellulosic agricultural wastes under thermal conditions.

The production of lactic acid (LA) from agricultural wastes attracts great attention because of the sustainability and abundance of lignocellulosic feedstocks, as well as the increasing demand for biodegradable polylactic acid. In this study, we isolated a thermophilic strain Geobacillus stearothermophilus 2H-3 for use in robust production of L-(+)LA under the optimal conditions of 60 °C, pH 6.5, which were consistent with the whole-cell-based consolidated bio-saccharification (CBS) process. Sugar-rich CBS hydrolysates derived from various agricultural wastes, including corn stover, corncob residue, and wheat straw, were used as the carbon sources for 2H-3 fermentation by directly inoculating 2H-3 cells into the CBS system, without intermediate sterilization, nutrient supplementation, or adjustment of fermentation conditions. Thus, we successfully combined two whole-cell-based steps into a one-pot successive fermentation process to efficiently produce LA with high optical purity (99.5%), titer (51.36 g/L), and yield (0.74 g/gbiomass). This study provides a promising strategy for LA production from lignocellulose through CBS and 2H-3 fermentation integration.

Molecular Basis of TcdR-Dependent Promoter Activity for Toxin Production by Clostridioides difficile Studied by a Heterologous Reporter System.

The alternative σ factor TcdR controls the synthesis of two major enterotoxins: TcdA and TcdB in Clostridioides difficile. Four potential TcdR-dependent promoters in the pathogenicity locus of C. difficile showed different activities. In this study, we constructed a heterologous system in Bacillus subtilis to investigate the molecular basis of TcdR-dependent promoter activity. The promoters of the two major enterotoxins showed strong TcdR-dependent activity, while the two putative TcdR-dependent promoters in the upstream region of the tcdR gene did not show detectable activity, suggesting that the autoregulation of TcdR may need other unknown factors involved. Mutation analysis indicated that the divergent -10 region is the key determinant for different activities of the TcdR-dependent promoters. Analysis of the TcdR model predicted by AlphaFold2 suggested that TcdR should be classified into group 4, i.e., extracytoplasmic function, σ70 factors. The results of this study provide the molecular basis of the TcdR-dependent promoter recognition for toxin production. This study also suggests the feasibility of the heterologous system in analyzing σ factor functions and possibly in drug development targeting these factors.

Structural characterization on a ß-agarase Aga86A_Wa from Wenyingzhuangia aestuarii reveals the prevalent methyl-galactose accommodation capacity of GH86 enzymes at subsite -1.

Agarans are sulfated galactans extracted from red algae with high structural complexity, of which natural methylation often occurs on the O-6 position of its ß-d-galactopyranose units. Although many agaran degrading enzymes, including agarases and porphyranases, have been characterized, little attention has been paid to the tolerance of methyl groups at cleavage subsites. In this study, the structure of GH86 ß-agarase Aga86A_Wa from Wenyingzhuangia aestuarii was determined by X-ray crystallography and investigated from a structural biology perspective. The structure indicated that an accommodation pocket formed by F367, Y280, and Q326 at subsite -1 contributes to the methyl-galactose tolerance of Aga86A_Wa. Furthermore, we found that similar accommodation pockets were present in the structures of two other GH86 enzymes BuGH86 from Bacteroides uniformis and BpGH86A from Phocaeicola plebeius, and their previously undisclosed methyl-galactose tolerance was verified, validating the function of the pockets. Phylogenetic analysis, structural modeling, and hydrolysis product characterization suggested that the methyl-galactose accommodation capacity at subsite -1 was prevalent in GH86 members. These findings achieve a better understanding of the function and mechanism of GH86 agaran degrading enzymes, and will facilitate the precise preparation of agaran oligosaccharides by employing defined tools.

Bioconversion of non-food corn biomass to polyol esters of fatty acid and single-cell oils.

BACKGROUND: Lignocellulose is a valuable carbon source for the production of biofuels and biochemicals, thus having the potential to substitute fossil resources. Consolidated bio-saccharification (CBS) is a whole-cell-based catalytic technology previously developed to produce fermentable sugars from lignocellulosic agricultural wastes. The deep-sea yeast strain Rhodotorula paludigena P4R5 can produce extracellular polyol esters of fatty acids (PEFA) and intracellular single-cell oils (SCO) simultaneously. Therefore, the integration of CBS and P4R5 fermentation processes would achieve high-value-added conversion of lignocellulosic biomass. RESULTS: The strain P4R5 could co-utilize glucose and xylose, the main monosaccharides from lignocellulose, and also use fructose and arabinose for PEFA and SCO production at high levels. By regulating the sugar metabolism pathways for different monosaccharides, the strain could produce PEFA with a single type of polyol head. The potential use of PEFA as functional micelles was also determined. Most importantly, when sugar-rich CBS hydrolysates derived from corn stover or corncob residues were used to replace grain-derived pure sugars for P4R5 fermentation, similar PEFA and SCO productions were obtained, indicating the robust conversion of non-food corn plant wastes to high-value-added glycolipids and lipids. Since the produced PEFA could be easily collected from the culture via short-time standing, we further developed a semi-continuous process for PEFA production from corncob residue-derived CBS hydrolysate, and the PEFA titer and productivity were enhanced up to 41.1 g/L and 8.22 g/L/day, respectively. CONCLUSIONS: Here, we integrated the CBS process and the P4R5 fermentation for the robust production of high-value-added PEFA and SCO from non-food corn plant wastes. Therefore, this study suggests a feasible way for lignocellulosic agro-waste utilization and the potential application of P4R5 in industrial PEFA production.

Robust, Scalable, and Cost-Effective Surface Carbonized Pulp Foam for Highly Efficient Solar Steam Generation.

Recently, a solar-driven evaporator has been applied in seawater desalination, but the low stability, high cost, and complex fabrication limit its further application. Herein, we report a novel, low-cost, scalable, and easily fabricated pulp-natural rubber (PNR) foam with a unique porous structure, which was directly used as a solar-driven evaporator after facile surface carbonization. This surface carbonized PNR (CPNR) foam without interface adhesion or modification was composed of a top photothermal layer with light absorption ability and a bottom hydrophilic foam layer with a porous and interconnected network structure. Due to the strong light absorption ability (93.2%) of the carbonized top layer, together with the low thermal conductivity (0.1 W m K-1) and good water adsorption performance (9.9 g g-1) of the bottom layer, the evaporation rate and evaporation efficiency of the pulp foam evaporator under 1 sun of illumination attained 1.62 kg m-2 h-1 and 98.09%, respectively, which were much higher than those of most cellulose-based solar-driven evaporators. Furthermore, the CPNR foam evaporator with high cost-effectiveness presented high light-thermal conversion, heat localization, and good salt rejection properties due to the unique porous structure. Additionally, the CPNR foam evaporator exhibited potential applications in the treatments of simulated sewage, metal ion concentration, and seawater desalination. Its cost-effectiveness was clearly higher than that of most reported evaporators as well. Therefore, this novel, low-cost, and stable pulp foam evaporator demonstrated here can be a very promising solution for water desalination and purification.

Core-Shell Filament with Excellent Wound Healing Property Made of Cellulose Nanofibrils and Guar Gum via Interfacial Polyelectrolyte Complexation Spinning.

Natural polymer-based sutures have attractive cytocompatibility and degradability in surgical operations. Herein, anionic cellulose nanofibrils (ACNF) and cationic guar gum (CGG) are employed to produce nontoxic CGG/ACNF composite filament with a unique core-shell structure via interfacial polyelectrolyte complexation (IPC) spinning. The comprehensive characterization and application performance of the resultant CGG/ACNF filament as a surgical suture are thoroughly investigated in comparison with silk and PGLA (90% glycolide and 10% l-lactide) sutures in vitro and in vivo, respectively. Results show that the CGG/ACNF filament with the typical core-shell structure and nervation pattern surface exhibits a high orientation index (0.74) and good mechanical properties. The tensile strength and knotting strength of CGG/ACNF suture prepared by twisting CGG/ACNF filaments increase by 69.5%, and CGG/ACNF suture has a similar friction coefficient to silk and PGLA sutures. Moreover, CGG/ACNF suture with antibiosis and cytocompatibility exhibits better growth promotion of cells than silk suture, similar to PGLA suture in vitro. In addition, the stitching experiment of mice with the CGG/ACNF suture further confirms better healing properties and less inflammation in vivo than silk and PGLA sutures do. Hence, the CGG/ACNF suture with a simple preparation method and excellent application properties is promising in surgical operations.

Deciphering Cellodextrin and Glucose Uptake in Clostridium thermocellum.

Sugar uptake is of great significance in industrially relevant microorganisms. Clostridium thermocellum has extensive potential in lignocellulose biorefineries as an environmentally prominent, thermophilic, cellulolytic bacterium. The bacterium employs five putative ATP-binding cassette transporters which purportedly take up cellulose hydrolysates. Here, we first applied combined genetic manipulations and biophysical titration experiments to decipher the key glucose and cellodextrin transporters. In vivo gene inactivation of each transporter and in vitro calorimetric and nuclear magnetic resonance (NMR) titration of each putative sugar-binding protein with various saccharides supported the conclusion that only transporters A and B play the roles of glucose and cellodextrin transport, respectively. To gain insight into the structural mechanism of the transporter specificities, 11 crystal structures, both alone and in complex with appropriate saccharides, were solved for all 5 putative sugar-binding proteins, thus providing detailed specific interactions between the proteins and the corresponding saccharides. Considering the importance of transporter B as the major cellodextrin transporter, we further identified its cryptic, hitherto unknown ATPase-encoding gene as clo1313_2554, which is located outside the transporter B gene cluster. The crystal structure of the ATPase was solved, showing that it represents a typical nucleotide-binding domain of the ATP-binding cassette (ABC) transporter. Moreover, we determined that the inducing effect of cellobiose (G2) and cellulose on cellulosome production could be eliminated by deletion of transporter B genes, suggesting the coupling of sugar transport and regulation of cellulosome components. This study provides key basic information on the sugar uptake mechanism of C. thermocellum and will promote rational engineering of the bacterium for industrial application. IMPORTANCE Highly efficient sugar uptake is important to microbial cell factories, and sugar transporters are therefore of great interest in the study of industrially relevant microorganisms. Clostridium thermocellum is a lignocellulolytic bacterium known for its multienzyme complex, the cellulosome, which is of great potential value in lignocellulose biorefinery. In this study, we clarify the function and mechanism of substrate specificity of the five reported putative sugar transporters using genetic, biophysical, and structural methods. Intriguingly, the results showed that only one of them, transporter B, is the major cellodextrin transporter, whereas another, transporter A, represents the major glucose transporter. Considering the importance of transporter B, we further identified the missing ATPase gene of transporter B and revealed the correlation between transporter B and cellulosome production. Revealing the mechanism by which C. thermocellum utilizes cellodextrins will help pave the way for engineering the strain for industrial applications.

Dissolved xylan inhibits cellulosome-based saccharification by binding to the key cellulosomal component of Clostridium thermocellum.

Polysaccharides derived from lignocellulose are promising sustainable carbon sources. Cellulosome is a supramolecular machine integrating multi-function enzymes for effective lignocellulose bio-saccharification. However, how various non-cellulose components of lignocellulose affect the cellulosomal saccharification is hitherto unclear. This study first investigated the stability and oxygen sensitivity of the cellulosome from Clostridium thermocellum during long-term saccharification process. Then, the differential inhibitory effects of non-cellulose components, including lignin, xylan, and arabinoxylan, on the cellulosome-based saccharification were determined. The results showed that lignin played inhibitory roles by non-productively adsorbing extracellular proteins of C. thermocellum. Differently, arabinoxylan preferred to bind with the cellulosomal components. Almost no adsorption of cellulosomal proteins on solid xylan was detected. Instead, xylan in water-dissolved form interacted with the cellulosomal proteins, especially the key exoglucanase Cel48S, leading to the xylan inhibitory effect. Compared to xylan, xylooligosaccharides influenced the cellulosome activity slightly. Hence, this work demonstrates that the timely hydrolysis or removal of dissolved xylan is important for cellulosome-based lignocellulose saccharification.