Exploring traditional and modern approaches for extracting bioactive compounds from Ferulago trachycarpa.

For more than two millennia, Ferulago species have been revered as therapeutic herbs, maintaining their significance in present-day folk medicine practices. Therefore, the present study was conducted to investigate the phytochemical composition, inhibitory effects on metabolic enzymes, and possible therapeutic applications of F. trachycarpa, specifically focusing on its efficacy in diabetes management, anticholinergic effects, and antioxidant capabilities. The current investigation comprised an evaluation of a range of extracts acquired via conventional and modern methodologies, such as soxhlet (SOX), maceration (MAC) accelerated solvent extraction (ASE), homogenizer-assisted extraction (HAE), supercritical fluid extraction (SFE), microwave-assisted extraction (MW), and ultrasound-assisted extraction (UAE). Various techniques were employed to assess their antioxidant capacity and enzyme inhibition. Furthermore, the research utilized ultra-high performance liquid chromatography-MS/MS (UHPLC-MS/MS) to ascertain the principal phenolic compounds that are responsible for the antioxidant capacity observed in the various F. trachycarpa extracts. Among these, extracts from HAE, ASE, and MW revealed the most promise across all methodologies tested for their antioxidant potential. Furthermore, SFE and MAC extracts inhibited the most enzymes, including cholinesterases, tyrosinase, α -amylase, and α -glycosidase, indicating their potential as efficient natural treatments for several health-related issues.

Production, modification and degradation of fructans and fructooligosacharides by enzymes originated from plants.

Non-starch polysaccharides exhibit numerous beneficial health effects but compounds belonging to FODMAP (Fermentable Oligo- Di- and Monosaccharides and Polyols) has been recently connected to several gastrointestinal disorders. This review presents integrated literature data on the occurrence and types of fructans and fructooligosaccharids (classified as FODMAPs) as well as their degrading enzymes present in plants. Plants from the family Asteraceae and many monocotyledones, including families Poaceae and Liliaceae, are the most abundant sources of both fructans and fructan-degrading enzymes. So far, vast majority of publications concerning the application of these specific plants in production of bakery products is related to increase of dietary fibre content in these products. However, there is limited research on their effect on FODMAP content and fibre balance. The authors emphasize the possibility of application of enzyme rich plant extract in food production casting light on the new scientific approach to fibre modification.

UHPLC-MS/MS analysis, cytotoxic, enzyme inhibition, and antioxidant properties of Lantana camara L. extracts obtained by conventional and nonconventional methods.

Lantana camara is widely known as a garden plant, but its use for various medicinal purposes is widespread in traditional medicine. In the frame of this study, L. camara was subjected to several different extraction techniques, including supercritical carbon dioxide extraction, accelerated solvent extraction (ASE), homogenizer-assisted extraction, microwave-assisted extraction, ultrasound-assisted extraction, maceration, and Soxhlet extraction. The investigation encompasses the analysis of the chemical composition alongside assessments of biological activities, such as antioxidant and enzyme-inhibition potential and cytotoxicity of the obtained extracts. The obtained results showed that the extract obtained by accelerated-solvent extraction was the richest in the content of total phenols and of individual compounds. Of the 17 components identified in total, hispidulin was detected in the highest concentration (5.43-475.97 mg/kg). In the antioxidant assays, the extracts obtained by accelerated-solvent and microwave extraction possessed the highest level of antioxidant and antiradical protection. All obtained extracts showed enzyme-inhibitory action on amylase, glucosidase, tyrosinase, and cholinesterase, showing a high potential for application against diseases induced by excessive activity of these enzymes. Cytotoxic analysis was performed on normal and tumor cells, whereby the obtained IC50 values were in the range of 7.685-79.26 µg/mL, showing the high cytotoxicity of the obtained extracts. Using Z score analysis, ASE resulted in an optimal combination of tested quality characteristics of the L. camara extracts.

Exploring the composition and potential uses of four hops varieties through different extraction techniques.

Hydrophilic, lipophilic extracts and essential oil of four hops varieties from Slovenia were examined in this study. Lipophilic extracts were obtained by supercritical extraction (SFE), while for hydrophilic extracts ultrasound and microwave extraction were employed. Essential oils were isolated by the hydrodistillation process. The lipophilic composition of essential oils and lipophilic extracts was determined by GC-MS analysis. Monoterpenes and sesquiterpene hydrocarbons were the most abundant class of compounds in oils (62.27-79.65 %), with myrcene being the most abundant constituent. Limonene and trans-caryophyllene were two terpenes determined in all essential oils while only trans-caryophyllene was detected in SFE samples. Antioxidant, antimicrobial, and cytotoxic activity, determined by applying in vitro assays, was more influenced by extraction technique than by varieties. Molecular docking was carried out to gain insight into the potential cancer protein targets BCL-2 and MMP9, whereby humulene epoxide II displayed good binding configuration within the cavities of the two proteins.

Extractions of aerial parts of Hippomarathrum scabrum with conventional and green methodologies: Chemical profiling, antioxidant, enzyme inhibition, and anti-cancer effects.

Hippomarathrum scabrum L. is an endemic medicinal plant in Turkey; however, there have been few studies investigating the phytochemistry and biological properties of these plants has not been investigated. The aim of this work is to determine the chemical composition of different extracts (extracts obtained by using supercritical carbon dioxide extraction, accelerated solvent extraction, homogenizer-assisted extraction, microwave-assisted extraction, and ultrasound-assisted extraction from Hippomarathrum scabrum L., and evaluate their biological properties. The analysis revealed that 5-O-caffeoylquinic acid, rutin, and isorhamnetin 3-O-rutinoside were the main bioactive compounds. The extract obtained by accelerated extraction contains the highest concentration of 5-O-Caffeoylquinic acid (7616.74 ± 63.09 mg/kg dry extract) followed by the extract obtained by homogenizer-assisted extraction (6682.53 ± 13.04 mg/kg dry extract). In antioxidant tests, all extracts expressed significant antioxidant activity. Also, cytotoxic and anticancer effects of these plant extracts were detected in the human prostate cancer cell line. Intrinsic apoptotic genes were up-regulated and anti-apoptotic genes were down-regulated in human prostate cancer cells after inhibition concentration dose treatment. The findings are promising, and suggest the use of these plant extracts could be used as natural sources with different biological activities, as well as anticancer agents.

New Biological and Chemical Insights into Optimization of Chamomile Extracts by Using Artificial Neural Network (ANN) Model.

Chamomile is one of the most consumed medicinal plants worldwide. Various chamomile preparations are widely used in various branches of both traditional and modern pharmacy. However, in order to obtain an extract with a high content of the desired components, it is necessary to optimize key extraction parameters. In the present study, optimization of process parameters was performed using the artificial neural networks (ANN) model using a solid-to-solvent ratio, microwave power and time as inputs, while the outputs were the yield of the total phenolic compounds (TPC). Optimized extraction conditions were as follows: a solid-to-solvent ratio of 1:80, microwave power of 400 W, extraction time of 30 min. ANN predicted the content of the total phenolic compounds, which was later experimentally confirmed. The extract obtained under optimal conditions was characterized by rich composition and high biological activity. Additionally, chamomile extract showed promising properties as growth media for probiotics. The study could make a valuable scientific contribution to the application of modern statistical designs and modelling to improve extraction techniques.

An application of the standardised reference extract quantification strategy in the quality control of ginseng infusions by liquid chromatography with mass spectrometric detection.

INTRODUCTION: Limited availability of individual standards is a bottleneck for quality control of functional foods and natural medicines. The use of standard mixtures or secondary standards is a possible alternative in this case. Earlier, an approach known as standardised reference extract (RE) strategy was introduced for HPLC-UV analysis of different plant materials; however, its application in HPLC-MS analysis has not been investigated. OBJECTIVE: To establish an HPLC-MS-based RE method for determination of ginsenoside content in ginseng infusions using commercially available extract reference material of Panax quinquefolius L. RESULTS: The developed HPLC-MS method was validated as precise (1.1%-9.4% intra-day variation; 1.6%-12.8% inter-day variation) and highly sensitive [limit of detection (LOD): 1-40 ng/mL; limit of quantification (LOQ): 4-120 ng/mL]. The stability of samples was satisfactory (5.7%-16.3%). The RE quantification method was compared with the external standard method, and the obtained difference was not significant, mostly in the range of 5%-10%. Matrix effects for the diluted samples of RE and ginseng infusions, determined via the standard addition method, were in the range of 85%-115% and 80%-126%, respectively, and were also positively correlated with the ginsenoside concentration. Eleven batches of ginseng infusions from different manufacturers were analysed using the established method. CONCLUSION: The method for HPLC-MS-based ginsenoside quantification using RE as a secondary standard was established for the first time. The results of this study demonstrate that the application of the standardised RE strategy in HPLC-MS can minimise the matrix effect-related error in addition to the cost-effective quality control of herbal products, foods, and traditional medicines.

Isolation of Cherry Seed Oil Using Conventional Techniques and Supercritical Fluid Extraction.

This study aims to compare the suitability of three extraction techniques (cold pressing, Soxhlet and supercritical fluid extraction (SFE)) to isolate oil from cherry seeds. Oils were examined in terms of extraction yield, fatty acids profile, tocopherols yield and antioxidant activity. Additionally, influence of SFE parameters was evaluated using one-factor-at-a-time design with pressure (200−350 bar), temperature (40−70 °C), flow rate (0.2−0.4 kg/h) and particle size (<800 µm and >800 µm). Oil yields ranged from 2.50% to 13.02%, whereas the highest yield was achieved with SFE. Samples were rich in polyunsaturated fatty acids, regardless of the applied extraction technique. The main fatty acids were linoleic (46.32−47.29%), oleic (40.89−41.65%), palmitic (6.56−8.00%) and stearic (2.21−2.30%) acid. Total tocopherols yield was between 16.63 mg/100 g oil and 60.61 mg/100 g oil, and highest yield was achieved with SFE. Among the tocopherols, γ-tocopherol was the most abundant, followed by α-, δ- and ß-tocopherol. Antioxidant activity was determined using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic) cation (ABTS) assays, and the results indicated that SFE extracts exhibited better or comparable antioxidant potential compared to traditional techniques. The comparison between modern and conventional extractions for oil recovery demonstrates pros and cons for the possibility of industrial application.