Trapeziometacarpal joint mobility in gibbons (fam. Hylobatidae) and rhesus macaques (Macaca mulatta).

OBJECTIVES: The purpose of this study is to investigate the differences in 3D kinematics of the trapeziometacarpal (TMC) joint between gibbons (fam. Hylobatidae) and macaques (Macaca mulatta), two non-human primate groups with a distinct locomotor behavior. Gibbons are highly arboreal species, while macaques are quadrupeds. Here, we investigate the mobility and structural constraints of the TMC joint in both these primates and evaluate the hypothesis that differences in locomotor mode are reflected in joint structure and function. MATERIALS AND METHODS: We have developed an innovative software suite allowing for the quantification of in situ 3D kinematics based on medical imaging of the primate TMC joint using a unique sample of eight gibbons and seven macaques. These analyses are further supported by detailed dissection of the surrounding ligaments. RESULTS: The data demonstrate distinct differences in TMC joint mobility between gibbons and macaques, with wide ranges of motion in the gibbon TMC joint and restricted movement in macaques. Furthermore, the dissections show little dissimilarity in ligament anatomy that could be associated with the differences in TMC joint capabilities. CONCLUSION: We conclude that gibbons possess a highly mobile TMC joint and the ball-and-socket morphology allows for large ranges of motion. This type of morphology, however, does not offer much inherent stabilization. Lack of structural joint reinforcement suggests that gibbons may have difficulty in performing any type of power grasp with high loads. Macaques, on the other hand, are shown to have a considerably reinforced TMC joint, which is likely related to the habitual loading of the thumb during locomotion.

Assessment of healthy trapeziometacarpal cartilage properties using indentation testing and contrast-enhanced computed tomography.

BACKGROUND: The trapeziometacarpal joint is a common site for osteoarthritis development in the hand. When osteoarthritis is present, it results in significant functional disabilities due to the broad range of activities performed by this joint. However, our understanding of osteoarthritis initiation and progression at this joint is limited because of the current lack of knowledge regarding the properties and structure of the corresponding cartilage layers. The objective of this study is to assess the morphological and mechanical properties of trapeziometacarpal cartilage via the combination of indentation testing and contrast-enhanced computed tomography. Such research may lead to the development of medical imaging-based approaches to measure cartilage properties in vivo. METHODS: Intact first metacarpals and trapezia were extracted from 16 fresh-frozen human cadaver hands. For each specimen, load-displacement behavior was measured at 9 testing sites using a standardized indentation testing device to calculate the normal force and Young's modulus of the cartilage sub-regions. The specimens were then immersed in CA4+ contrast agent solution for 48 h and subsequently scanned with a resolution of 41 µm in a HR-pQCT scanner to measure cartilage thickness and attenuation. Finally, correlations between compressive Young's modulus and contrast-enhanced computed tomography attenuation of the cartilage were assessed. FINDINGS: No significant difference was found in cartilage thickness between the trapezium and first metacarpal, but the comparison between articular regions showed thinner cartilage around the volar aspect of both the first metacarpal and the trapezium. The first metacarpal cartilage was stiffer than the trapezial cartilage. A significant positive correlation was observed between Young's modulus and mean contrast-enhanced CT attenuations in superficial and full-depth cartilage in both the first metacarpal and the trapezium cartilage. INTERPRETATION: The quantitative measurements of trapeziometacarpal thickness and stiffness as well as a correlation between Young's modulus and contrast-enhanced computed tomography attenuation provides a method for the non-destructive in vivo assessment of cartilage properties, a greater understanding of thumb cartilage behavior, and a dataset for the development of more accurate computer models.

Impact of Osteoarthritis and Total Joint Arthroplasty on the Kinematics of the Trapeziometacarpal Joint: A Pilot Study.

PURPOSE: To quantify the effect of osteoarthritis (OA) and total trapeziometacarpal (TMC) joint replacement on thumb kinematics during the primary physiological motions of the thumb. METHODS: We included 4 female patients with stage III TMC OA. A computed tomography-based markerless method was used to quantify the 3-dimensional thumb kinematics in patients before and after TMC joint replacement surgery with the Arpe implant. RESULTS: Trapeziometacarpal OA led to a marked decrease of internal rotation and abduction of the first metacarpal (MC1) during thumb flexion and a decrease of MC1 adduction during thumb adduction. As a compensatory phenomenon, the trapezium displayed increased abduction. The absence of MC1 translation in the ball-and-socket implant seems to induce a decrease of MC1 adduction as well as a decrease of trapezium adduction during thumb adduction, compared with OA and healthy joints. Implant replacement displayed an unchanged MC1 flexion during thumb flexion and seemed to slightly increase MC1 axial rotation during thumb flexion and adduction. Abduction and adduction of the MC1 are limited and compensated by this somewhat increased axial rotation, allowing more efficient thumb opposition. CONCLUSIONS: The study highlights that advanced TMC OA mainly restricts the MC1 mobility. We also showed that, whereas total joint arthroplasty is able to restore thumb function, it cannot fully replicate the kinematics of the healthy TMC joint. CLINICAL RELEVANCE: The quantification of TMC joint kinematics in OA and implanted patients is essential to improve our understanding of TMC OA as well as to enhance the functionality of implant designs.

In vivo biomechanical behavior of the trapeziometacarpal joint in healthy and osteoarthritic subjects.

BACKGROUND: The contact biomechanics of the trapeziometacarpal joint have been investigated in several studies. However, these led to conflicting results and were mostly performed in vitro. The purpose of this study was to provide further insight on the contact biomechanics of the trapeziometacarpal joint by in vivo assessment of healthy and osteoarthritic subjects. METHODS: The hands of 16 healthy women and 6 women with trapeziometacarpal osteoarthritis were scanned in positions of maximal thumb extension, flexion, abduction and adduction during three isometric tasks (lateral key pinch, power grasp and jar twist) and in thumb rest posture (relaxed neutral). Three-dimensional surface models of the trapezium and first metacarpal were created for each thumb configuration. The articular surface of each bone was measured in the neutral posture. A computed tomography-based proximity mapping algorithm was developed to calculate the distance between opposing joint surfaces, which was used as a surrogate for intra-articular stress. FINDINGS: Distinct proximity patterns were observed across tasks with a recurrent pattern reported on the volar aspect of the first metacarpal. The comparison between healthy and arthritic subjects showed a significantly larger articular area, in parallel with a significant joint space narrowing and an increase in proximity area in arthritic subjects. We also observed severe articular deformations in subjects with late stage osteoarthritis. INTERPRETATION: This study has increased our insight in the contact biomechanics of the trapeziometacarpal joint during tasks and positions of daily life in healthy and arthritic subjects, which might contribute to a better understanding of the occurrence mechanisms of degenerative diseases such as osteoarthritis.

In vivo kinematics of the thumb during flexion and adduction motion: Evidence for a screw-home mechanism.

The thumb plays a crucial role in basic hand function. However, the kinematics of its entire articular chain have not yet been quantified. Such investigation is essential to improve our understanding of thumb function and to develop better strategies to treat thumb joint pathologies. The primary objective of this study is to quantify the in vivo kinematics of the trapeziometacarpal (TMC) and scaphotrapezial (ST) joints during flexion and adduction of the thumb. In addition, we want to evaluate the potential coupling between the TMC and ST joints during these tasks. The hand of 16 asymptomatic women without signs of thumb osteoarthritis were CT scanned in positions of maximal thumb extension, flexion, abduction, and adduction. The CT images were segmented and three-dimensional surface models of the radius, scaphoid, trapezium, and the first metacarpal were created for each thumb motion. The corresponding rotations angles, translations, and helical axes were calculated for each sequence. The analysis shows that flexion and adduction of the thumb result in a three-dimensional rotation and translation of the entire articular chain, including the trapezium and scaphoid. A wider range of motion is observed for the first metacarpal, which displays a clear axial rotation. The coupling of axial rotation of the first metacarpal with flexion and abduction during thumb flexion supports the existence of a screw-home mechanism in the TMC joint. In addition, our results point to a potential motion coupling between the TMC and ST joints and underline the complexity of thumb kinematics. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1556-1564, 2017.

Subject-specific thumb muscle activity during functional tasks of daily life.

BACKGROUND: The trapeziometacarpal joint is subjected to high compressive forces during powerful pinch and grasp tasks due to muscle loading. In addition, muscle contraction is important for stability of the joint. The aim of the present study is to explore if different muscle activation patterns can be found between three functional tasks. METHODS: Isometric forces and fine-wire electromyographic (fEMG) activity produced by three intrinsic and four extrinsic thumb muscles were measured in 10 healthy female volunteers. The participants performed isometric contractions in a lateral key pinch, a power grasp and a jar twist task. The tasks were executed with and without EMG recording to verify if electrode placement influenced force production. RESULTS: A subject-specific muscle recruitment was found which remained largely unchanged across tasks. Extrinsic thumb muscles were significantly more active than intrinsic muscles in all tasks. Insertion of the fEMG electrodes decreased force production significantly in all tasks. CONCLUSION: The thumb muscles display a high variability in muscle activity during functional tasks of daily life. The results of this study suggest that to produce a substantial amount of force, a well-integrated, but subject-specific, co-contraction between the intrinsic and extrinsic thumb muscles is necessary.

In vivo contact biomechanics in the trapeziometacarpal joint using finite deformation biphasic theory and mathematical modelling.

The assessment of the contact biomechanics in the trapeziometacarpal (TMC) joint during functional tasks represents a relevant way to obtain a better understanding of the onset of osteoarthritis (OA). CT scans of the hand region of 20 female volunteers were taken in relaxed neutral, lateral key pinch and power grasp configuration. 3D models of the first metacarpal (MC1) and the trapezium were created. The articular area of each bone was quantified and a mathematical model was developed in Matlab to evaluate the projected contact area and stress distribution of each bone. The articular areas of the MC1 and the trapezium presented no significant difference. A slightly smaller projected contact area was calculated for the trapezium compared to the MC1. Similar amounts of stress were reported in the neutral and lateral pinch configurations. The highest stress levels were observed during power grasp. Very consistent results for high stress location on the volar/radial articular sub-region were found in the neutral and power grasp configurations. More variation was reported during lateral pinch. The mathematical model presented in this paper offers the possibility to predict contact patterns within the TMC joint based on in vivo CT images.

Oblique ulnar styloid osteotomy--a treatment for ulnar styloid impaction syndrome.

PURPOSE: We report a series of 5 patients (mean age, 41 y) presenting with ulnar styloid impingement syndrome (USIS) and treated by an oblique ulnar styloid osteotomy. The purpose of the study was to determine whether the osteotomy is an effective method for treating USIS. METHODS: The diagnosis of USIS was made based on a history of ulnar-sided wrist pain supported by clinical and radiological findings. Clinical assessment included provocative tests to differentiate USIS from pain associated with ulnocarpal impaction syndrome. The ulnar styloid length was assessed with a posteroanterior X-ray using the methods of Garcia-Elias and Biyani. The ulnar styloid was deemed excessively long if the ulnar styloid process index was greater than 0.21 or if the overall styloid length was greater than 6 mm. Ulnar variance was recorded. All wrists were assessed by computed tomography arthrography and magnetic resonance imaging studies to rule out any associated soft tissue abnormalities, including ligamentous injuries. Preoperative and postoperative pain levels were recorded using a pain scoring system. RESULTS: Patients were followed up for a mean of 46 months. Before surgery, the mean styloid length was 10 mm, and the ulnar styloid process index was 0.32. The reported pain score was significantly reduced following surgery and all patients, except one, returned to premorbid levels of activity. CONCLUSIONS: Oblique ulnar styloid osteotomy is an effective means of relieving impaction of the ulnar styloid while preserving the integrity of the intrinsic ulnar styloid ligaments. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Bilateral avascular necrosis of the trapezoid.

We present a 5-year follow-up of a patient with bilateral necrosis of the trapezoid that improved clinically and radiographically with nonoperative treatment.

Post-traumatic bone loss of the femur treated with segmental bone allograft and bone morphogenetic protein: a case report.

Reconstruction of a major bone loss remains a challenge for the orthopaedic surgeon. Most of the bone defects result from a bone tumour resection whereas a post-traumatic bone loss is more rare due to the numerous options available for bone fixation. However in high-energy trauma, the injury to bone may be so extensive as to justify removal of fragmented bone. A 57-year-old man presented with a severe injury at the thigh after a hunting accident, including a comminuted fracture of the femoral shaft. After thorough debridement, he was left with a large diaphyseal bone defect which was subsequently treated with a structural bone allograft, autogenous graft and rhBMP-7. Bone healing was achieved after several months.