Investigating the genetic basis of salt-tolerance in common bean: a genome-wide association study at the early vegetative stage.

Salinity poses a significant challenge to global crop productivity, affecting approximately 20% of cultivated and 33% of irrigated farmland, and this issue is on the rise. Negative impact of salinity on plant development and metabolism leads to physiological and morphological alterations mainly due to high ion concentration in tissues and the reduced water and nutrients uptake. Common bean (Phaseolus vulgaris L.), a staple food crop accounting for a substantial portion of consumed grain legumes worldwide, is highly susceptible to salt stress resulting in noticeable reduction in dry matter gain in roots and shoots even at low salt concentrations. In this study we screened a common bean panel of diversity encompassing 192 homozygous genotypes for salt tolerance at seedling stage. Phenotypic data were leveraged to identify genomic regions involved in salt stress tolerance in the species through GWAS. We detected seven significant associations between shoot dry weight and SNP markers. The candidate genes, in linkage with the regions associated to salt tolerance or harbouring the detected SNP, showed strong homology with genes known to be involved in salt tolerance in Arabidopsis. Our findings provide valuable insights onto the genetic control of salt tolerance in common bean and represent a first contribution to address the challenge of salinity-induced yield losses in this species and poses the ground to eventually breed salt tolerant common bean varieties.

Daytime Radiative Cooling: A Perspective toward Urban Heat Island Mitigation.

Traditional cooling and heating systems in residential buildings account for more than 15% of global electricity consumption and 10% of global emissions of greenhouse gases. Daytime radiative cooling (DRC) is an emerging passive cooling technology that has garnered significant interest in recent years due to its high cooling capability. It is expected to play a pivotal role in improving indoor and outdoor urban environments by mitigating surface and air temperatures while decreasing relevant energy demand. Yet, DRC is in its infancy, and thus several challenges need to be addressed to establish its efficient wide-scale application into the built environment. In this Perspective, we critically discuss the strategies and progress in materials development to achieve DRC and highlight the challenges and future paths to pave the way for real-life applications. Advances in nanofabrication in combination with the establishment of uniform experimental protocols, both in the laboratory/field and through simulations, are expected to drive economic increases in DRC.

Strigolactone decreases cadmium concentrations by regulating cadmium localization and glyoxalase defense system: Effects on nodules organic acids and soybean yield.

To decrease environmental and human health risks associated with crop and soil contamination, alternative solutions are still needed. The information on strigolactones (SLs)-mediated elicitation of abiotic stress signaling and triggering physiological alterations is scarce in the plant. To unravel the same, soybean plants were subjected to cadmium (Cd) stress (20 mg kg-1), presence or absence of foliar applied SL (GR24) at the concentration of 10 µM. Excess Cd accumulation causes reduced growth (-52% shoot and +24% root), yield (-35%), physio-biochemical markers, organic acid production, and genes encoding heavy metal resilience in soybean. SL exogenous application decreased the growth and yield suppression (-12%), shielded chlorophyll (+3%), and prominently declined Cd-induced oxidative stress biomarkers accumulation in soybean. Moreover, SL effectively alleviates Cd-induced suppression in organic acids, superoxide dismutase (+73%), catalase activities (+117%), and increments ascorbate glutathione (ASA-GSH) cycle activities comprising ascorbate peroxidase, glutathione peroxidase, glutathione reductase, dehydroascorbate reductase, and monodehydroascorbate reductase. SL-mediated upregulation of genes encoding heavy metals tolerance and glyoxalase defense system in Cd stressed plants. The results of this work point out that SL could be a promising player in mitigating Cd-induced injuries effectively in soybean. It acts through the antioxidant system modulation for redox homeostasis, shielding chloroplasts, enhancing photosynthetic apparatus, and elevating organic acid production in soybean plants.

Mixed Zirconium Phosphate Bis-Phosphonomethyl Glycine from Nanocrystalline α-Zirconium Phosphate: A Tailored Suite for Gold Nanoparticles.

A novel synthetic approach was investigated for the preparation of nanoplatelets of mixed zirconium phosphate bis-phosphonomethyl glycine, ZPGly, by the reaction of a gel of nanocrystalline α-type zirconium phosphate with N,N-bis-phosphonomethyl glycine, H3Gly. The syntheses were carried out in the absence of hydrofluoric acid by changing both the reagent relative amounts and temperature. An H3Gly/Zr molar ratio >2 did not significantly improve the degree of crystallinity of the materials, while an increase of temperature from 80 °C to 120 °C improved the crystallinity; the best result was obtained with H3Gly/Zr molar ratio = 2 and with a temperature reaction of 120 °C. The sample consisted of nanoplatelets with the size in the range 20-40 nm, and it was successfully exfoliated by treatment with a solution of methylamine. By treatment of the ZPGly colloidal dispersions with HAuCl4, a color change from white to red-violet was observed, indicating the formation of gold nanoparticles. The size and morphology of the gold particles were affected by the degree of crystallinity and, in turn, by the composition of the ZPGly support. As a matter of fact, large micrometric Au particles with a cubo-octahedral morphology were obtained by using the less crystalline ZPGly_R2-80 sample, while interconnected Au particles, with a size of about 16 nm, were obtained by using ZPGly_R2-120. The samples exhibited an absorption maximum in the visible region due to the surface plasmon resonance of gold nanoparticles.

In Vitro Oxidative Stress Threatening Maize Pollen Germination and Cytosolic Ca2+ Can Be Mitigated by Extracts of Emmer Wheatgrass Biofortified with Selenium.

In this work, we studied the effects of in vitro oxidative stress applied by H2O2 to maize pollen germination and cytosolic Ca2+, taken as an experimental model to test the biological activity of extracts of emmer (Triticum turgidum L. spp. dicoccum (Schrank ex Shubler) Thell.) wheatgrass obtained from grains sprouted with distilled water, or salinity (50 mM) or selenium (45 mg L-1 of Na2SeO3). Wheatgrass extracts were obtained in two ways: by direct extraction in methanol, which represented the free phenolic fraction of extracts (Ef), and by residual content after alkaline digestion, which made it possible to obtain extracts with the bound fraction (Eb). Comparative tests on maize pollen were carried out by differently combining H2O2 and either wheatgrass extracts or pure phenolic acids (4-HO benzoic, caffeic, p-coumaric and salicylic). The cytosolic Ca2+ of maize pollen was influenced by either H2O2 or pure phenolic acids or Ef, but not by Eb. The negative effect of H2O2 on maize pollen germination and cytosolic Ca2+ was mitigated by Ef and, slightly, by Eb. The extent of the biological response of Ef depended on the sprouting conditions (i.e., distilled water, salinity or selenium). The extracts of Se-biofortified wheatgrass were the most effective in counteracting the oxidative stress.

Agronomic potential of two different glass-based materials as novel inorganic slow-release iron fertilizers.

BACKGROUND: Large amounts of chemical fertilizers are still currently used to compensate the soil nutrients scarcity in order to increase and sustain crop yield with consequent rising of environmental pollution and health problems. To mitigate these environmental risks, fertilizers with slow-release behaviours have been developed. The aim of this study was to assess the agronomic potential of two different glass-based materials (by-products from the ceramic sector) as inorganic slow-release iron (Fe) fertilizers. RESULTS: The X-ray powder diffraction confirmed the presence of amorphous structure and the richness in Fe of the investigated materials. The solubility analysis highlighted the slow Fe release from the glassy network and that the maximum of the Fe release was at alkaline pH suggesting their potential use as slow-release Fe fertilizers, especially in calcareous soils. The pot and leaching experiments demonstrated that although the glass-based materials increased the amount of soil available Fe, we did not observe Fe leaching and plant toxicity. This fact would suggest their reliability to increase soil fertility without negative effects on the environment. CONCLUSION: The use of glass-based materials, specifically by-products from the ceramic sectors, as inorganic slow-release Fe fertilizers can be sustained. The tests performed at three different pH conditions testified the slow-release behaviour of the tested materials and underlined that the Fe release increases at alkaline environment. Therefore, the present study pointed out the glass-based materials by products from the ceramic sector as novel slow-release and environmental-friendly fertilizers in agriculture. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Persistence of the Effects of Se-Fertilization in Olive Trees over Time, Monitored with the Cytosolic Ca2+ and with the Germination of Pollen.

Selenium (Se) is an important micronutrient for living organisms, since it is involved in several physiological and metabolic processes. Biofortification with Se increases the nutritional and qualitative values of foods in Se-deficient regions and increases tolerance to oxidative stress in olive trees. Many studies have shown that Se, in addition to improving the qualitative and nutritional properties of EVO oil, also improves the plant's response to abiotic stress. This study addressed this issue by monitoring the effects of Se on cytosolic Ca2+ and on the germination of olive pollen grains in oxidative stress. The olive trees subjected to treatment with Na-selenate in the field produced pollen with a Se content 6-8 times higher than the controls, even after 20 months from the treatment. Moreover, part of the micronutrient was organic in selenium methionine. The higher selenium content did not produce toxic effects in the pollen, rather it antagonized the undesirable effects of oxidative stress in the parameters under study. The persistence of the beneficial effects of selenium observed over time in pollens, in addition to bringing out an undisputed adaptability of olive trees to the micronutrient, suggested the opportunity to reduce the number of treatments in the field.

Polydopamine Coated CeO2 as Radical Scavenger Filler for Aquivion Membranes with High Proton Conductivity.

CeO2 nanoparticles were coated with polydopamine (PDA) by dopamine polymerization in water dispersions of CeO2 and characterized by Infrared and Near Edge X-ray Absorption Fine Structure spectroscopy, Transmission Electron Microscopy, Thermogravimetric analysis and X-ray diffraction. The resulting materials (PDAx@CeO2, with x = PDA wt% = 10, 25, 50) were employed as fillers of composite proton exchange membranes with Aquivion 830 as ionomer, to reduce the ionomer chemical degradation due to hydroxyl and hydroperoxyl radicals. Membranes, loaded with 3 and 5 wt% PDAx@CeO2, were prepared by solution casting and characterized by conductivity measurements at 80 and 110 °C, with relative humidity ranging from 50 to 90%, by accelerated ex situ degradation tests with the Fenton reagent, as well as by in situ open circuit voltage stress tests. In comparison with bare CeO2, the PDA coated filler mitigates the conductivity drop occurring at increasing CeO2 loading especially at 110 °C and 50% relative humidity but does not alter the radical scavenger efficiency of bare CeO2 for loadings up to 4 wt%. Fluoride emission rate data arising from the composite membrane degradation are in agreement with the corresponding changes in membrane mass and conductivity.

"Shake 'n Bake" Route to Functionalized Zr-UiO-66 Metal-Organic Frameworks.

We report a novel synthetic procedure for the high-yield synthesis of metal-organic frameworks (MOFs) with fcu topology with a UiO-66-like structure starting from a range of commercial ZrIV precursors and various substituted dicarboxylic linkers. The syntheses are carried out by grinding in a ball mill the starting reagents, namely, Zr salts and the dicarboxylic linkers, in the presence of a small amount of acetic acid and water (1 mL total volume for 1 mmol of each reagent), followed by incubation at either room temperature or 120 °C. Such a simple "shake 'n bake" procedure, inspired by the solid-state reaction of inorganic materials, such as oxides, avoids the use of large amounts of solvents generally used for the syntheses of Zr-MOF. Acidity of the linkers and the amount of water are found to be crucial factors in affording materials of quality comparable to that of products obtained under solvo- or hydrothermal conditions.

Development of a Smart Leg Splint by Using New Sensor Technologies and New Therapy Possibilities.

Nowadays, after suffering a fracture in an upper or lower limb, a plaster cast is placed on the affected limb. It is a very old and efficient technique for recovery from an injury that has not had significant changes since its origin. This project aims to develop a new low-cost smart 3D printed splint concept by using new sensing techniques. Two rapidly evolving Advanced Manufacturing (AM) technologies will be used: 3D scanning and 3D printing, thus combining engineering, medicine and materials evolution. The splint will include new small and lightweight sensors to detect any problem during the treatment process. Previous studies have already incorporated this kind of sensor for medical purposes. However, in this study it is implemented with a new concept: the possibility of applying treatments during the immobilization process and obtaining information from the sensors to modify the treatment. Due to this, rehabilitation treatments like infrared, ultrasounds or electroshock may be applied during the treatment, and the sensors (as it is showed in the study) will be able to detect changes during the rehabilitation process. Data of the pressure, temperature, humidity and colour of the skin will be collected in real time and sent to a mobile device so that they can be consulted remotely by a specialist. Moreover, it would be possible to include these data into the Internet of Things movement. This way, all the collected data might be compared and studied in order to find the best treatment for each kind of injury. It will be necessary to use a biocompatible material, submersible and suitable for contact with skin. These materials make it necessary to control the conditions in which the splint is produced, to assure that the properties are maintained. This development, makes it possible to design a new methodology that will help to provide faster and easier treatment.

The First Evidence of the Beneficial Effects of Se-Supplementation on In Vitro Cultivated Olive Tree Explants.

Selenium is an essential micronutrient that provides important benefits to plants and humans. At proper concentrations, selenium increases plant growth, pollen vitality, the shelf life of fresh products, and seems to improve stress resistance; these effects can certainly be attributed to its direct and indirect antioxidant capacity. For these reasons, in the present work, the effects of selenium at different dosages on in vitro cultivated olive explants were investigated to observe possible positive effects (in terms of growth and vigor) on the proliferation phase. The work was carried out on four different olive cultivars: "San Felice", "Canino", "Frantoio", and "Moraiolo". The explants were cultured in aseptic conditions on olive medium (OM), with the addition of 4 mg·L-1 of zeatin, 30 g·L-1 of sucrose, and 7 g·L-1 of agar. The experimental scheme included a comparison between explants grown with five different concentrations of Na2SeO4 (0, 10, 20, 40, and 80 mg L-1) added to the medium during three successive subcultures. Interesting information has emerged from the results and all varieties responded to different concentrations of Selenium. The optimal Se dosages varied for each cultivar, but in general, Se concentration between 10 and 40 mg L-1 increased fresh and dry weight of the explants and shoot lengths. Se treatment induced in all cultivars and for all dosages used an increase in total Se content in proliferated explants. Furthermore, as the subcultures proceeded, the ability of the explants to absorb Se did not diminish. The Se content ranged from 8.55 to 114.21 µg kg-1 plant DW in 'Frantoio', from 9.83 to 94.85 µg kg-1 plant DW in 'Moraiolo', from 19.84 to 114.21 µg kg-1 plant DW in 'Canino', and from 20.97 to 95.54 µg kg-1 plant DW in 'San Felice'. In general, the effect of selenium tends to decrease with the progress of subcultures and this suggests a sort of "adaptation" effect of the explants to its presence. The present study highlights for the first time the possibility of using in vitro cultures as biotechnological support to study supplementation with selenium and its effects on in vitro olive plant growth.

In Vitro Evaluation of the Inhibitory Activity of Different Selenium Chemical Forms on the Growth of a Fusarium proliferatum Strain Isolated from Rice Seedlings.

In this study, the in vitro effects of different Se concentrations (5, 10, 15, 20, and 100 mg kg-1) from different Se forms (sodium selenite, sodium selenate, selenomethionine, and selenocystine) on the development of a Fusarium proliferatum strain isolated from rice were investigated. A concentration-dependent effect was detected. Se reduced fungal growth starting from 10 mg kg-1 and increasing the concentration (15, 20, and 100 mg kg-1) enhanced the inhibitory effect. Se bioactivity was also chemical form dependent. Selenocystine was found to be the most effective at the lowest concentration (5 mg kg-1). Complete growth inhibition was observed at 20 mg kg-1 of Se from selenite, selenomethionine, and selenocystine. Se speciation analysis revealed that fungus was able to change the Se speciation when the lowest Se concentration was applied. Scanning Electron Microscopy showed an alteration of the fungal morphology induced by Se. Considering that the inorganic forms have a higher solubility in water and are cheaper than organic forms, 20 mg kg-1 of Se from selenite can be suggested as the best combination suitable to inhibit F. proliferatum strain. The addition of low concentrations of Se from selenite to conventional fungicides may be a promising alternative approach for the control of Fusarium species.

Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers.

Composite materials with natural fillers have been increasingly used as an alternative to synthetically produced materials. This trend is visible from a representation of polymeric composites with natural cellulose fibers in the automotive industry of the European Union. This trend is entirely logical, owing to a preference for renewable resources. The experimental program itself follows pronounced hypotheses and focuses on a description of the mechanical properties of untreated and alkali-treated natural vegetable fibers, coconut and abaca fibers. These fibers have great potential for use in composite materials. The results and discussion sections contribute to an introduction of an individual methodology for mechanical property assessment of cellulose fibers, and allows for a clear definition of an optimal process of alkalization dependent on the content of hemicellulose and lignin in vegetable fibers. The aim of this research was to investigate the influence of alkali treatment on the surface microstructure and tensile properties of coir and abaca fibers. These fibers were immersed into a 5% solution of NaOH at laboratory temperature for a time interval of 30 min, 1 h, 2 h, 3 h, 6 h, 12 h, 24 h, and 48 h, rinsed and dried. The fiber surface microstructures before and after the alkali treatment were evaluated by SEM (scanning electron microscopy). SEM analysis showed that the alkali treatment in the NaOH solution led to a gradual connective material removal from the fiber surface. The effect of the alkali is evident from the visible changes on the surface of the fibers.

In†Situ X-ray Diffraction Investigation of the Crystallisation of Perfluorinated CeIV -Based Metal-Organic Frameworks with UiO-66 and MIL-140 Architectures*.

We report on the results of an in situ synchrotron powder X-ray diffraction study of the crystallisation in aqueous medium of two recently discovered perfluorinated CeIV -based metal-organic frameworks (MOFs), analogues of the already well investigated ZrIV -based UiO-66 and MIL-140A, namely, F4_UiO-66(Ce) and F4_MIL-140A(Ce). The two MOFs were originally obtained in pure form in similar conditions, using ammonium cerium nitrate and tetrafluoroterephthalic acid as reagents, and small variations of the reaction parameters were found to yield mixed phases. Here, we investigate the crystallisation of these compounds, varying parameters such as temperature, amount of the protonation modulator nitric acid and amount of the coordination modulator acetic acid. When only HNO3 is present in the reaction environment, only F4_MIL-140A(Ce) is obtained. Heating preferentially accelerates nucleation, which becomes rate determining below 57 °C. Upon addition of AcOH to the system, alongside HNO3 , mixed-phased products are obtained. F4_UiO-66(Ce) is always formed faster, and no interconversion between the two phases occurs. In the case of F4_UiO-66(Ce), crystal growth is always the rate-determining step. A higher amount of HNO3 favours the formation of F4_MIL-140A(Ce), whereas increasing the amount of AcOH favours the formation of F4_UiO-66(Ce). Based on the in situ results, a new optimised route to achieving a pure, high-quality F4_MIL-140A(Ce) phase in mild conditions (60 °C, 1 h) is also identified.

The chemistry of Ce-based metal-organic frameworks.

Metal-organic frameworks (MOFs) have gained widespread attention due to their modular construction that allows the tuning of their properties. Within this vast class of compounds, metal carboxylates containing tri- and tetravalent metal ions have been in the focus of many studies due to their often high thermal and chemical stabilities. Cerium has a rich chemistry, which depends strongly on its oxidation state. Ce(iii) exhibits properties typically observed for rare earth elements, while Ce(iv) is mostly known for its oxidation behaviour. In MOF chemistry this is reflected in their unique optical and catalytic properties. The synthetic parameters for Ce(iii)- and Ce(iv)-MOFs also differ substantially and conditions must be chosen to prevent reduction of Ce(iv) for the formation of the latter. Ce(iii)-MOFs are usually reported in comprehensive studies together with those constructed with other RE elements and normally they are isostructural. They exhibit a greater structural diversity, which is reflected in the larger variety of inorganic building units. In contrast, the synthesis conditions of Ce(iv)-MOFs were only recently (2015) established. These lead selectively to hexanuclear Ce-O clusters that are well-known for Zr-MOFs and therefore very similar structural and isoreticluar chemistry is found. Hence Ce(iv)-MOFs exhibit often high porosity, while only a few porous Ce(iii)-MOFs have been described. Some of these show structural flexibility which makes them interesting for separation processes. For Ce(iv)-MOFs the redox properties are most relevant. Thus, they are intensively discussed for catalytic, photocatalytic and sensing applications. In this perspective, the synthesis, structural chemistry and properties of Ce-MOFs are summarized.

Development of a Smart Splint to Monitor Different Parameters during the Treatment Process.

For certain musculoskeletal complex rupture injuries, the only treatment available is the use of immobilization splints. This type of treatment usually causes discomfort and certain setbacks in patients. In addition, other complications are usually generated at the vascular, muscular, or articular level. Currently, there is a really possible alternative that would solve these problems and even allows a faster and better recovery. This is possible thanks to the application of engineering on additive manufacturing techniques and the use of biocompatible materials available in the market. This study proposes the use of these materials and techniques, including sensor integration inside the splints. The main parameters considered to be studied are pressure, humidity, and temperature. These aspects are combined and analyzed to determine any kind of unexpected evolution of the treatment. This way, it will be possible to monitor some signals that would be studied to detect problems that are associated to the very initial stage of the treatment. The goal of this study is to generate a smart splint by using biomaterials and engineering techniques based on the advanced manufacturing and sensor system, for clinical purposes. The results show that the prototype of the smart splint allows to get data when it is placed over the arm of a patient. Two temperatures are read during the treatment: in contact with the skin and between skin and splint. The humidity variations due to sweat inside the splint are also read by a humidity sensor. A pressure sensor detects slight changes of pressure inside the splint. In addition, an infrared sensor has been included as a presence detector.

Phytoremediation Potential of Crop Plants in Countering Nickel Contamination in Carbonation Lime Coming from the Sugar Industry.

The phytoremediation potential of four crop species cultivated on carbonation lime coming from the sugar industry with water-soluble nickel (Ni) exceeding the Italian legal limit of 10 µg L-1 was assessed. Two autumn-winter species (spinach and canola) were tested with and without the addition of bentonite in a greenhouse experiment in order to overcome prolonged unfavourable weather conditions. Two spring-summer species (sunflower and sorghum) were grown in outdoor boxes. Plant species were selected among crops of interest for phytoremediation and their rotation throughout the year enable to maintain a permanent vegetation cover. Nickel concentration in different plant tissues and the concentrations of soluble and bioavailable Ni in lime were measured. In the greenhouse study, soluble Ni decreased below the legal limit in all the tests, and the combined effect of bentonite and plants reduced Ni in lime mainly in the bioavailable fraction. Spinach and sunflower emerged to be more suitable for phytoextraction than canola and sorghum, because of the higher concentration of the metal in the epigeal portions. The results from the outdoor experiment highlighted that sorghum has a good phytostabilisation potential since its ability to accumulate Ni mainly at the root level and to attract a significant amount of bioavailable Ni in the rhizosphere. This study arose from a real scenario of environmental contamination and investigated the potential of different approaches on the bioremediation of a specific industrial waste product.

Green and simple extraction of free seleno-amino acids from powdered and lyophilized milk samples with natural deep eutectic solvents.

Natural deep eutectic solvents (NADES) were introduced for the extraction of free seleno-amino acids from lyophilized and powdered milk samples. Different NADES were evaluated, and lactic acid:glucose (LGH) showed the highest selenium recoveries. Selenium analysis was performed by inductively coupled plasma mass spectrometry (ICP MS). Se-NADES analysis in ICP MS was optimized according to the radio frequency power and nebulization gas flow rate. Se-NADES extraction was optimized by an experimental design. LGH dilution, LGH volume, sample quantity, and ultrasound time were factors influencing the extraction. Seleno-amino acids were determined by liquid chromatography-ICP MS. After optimization, the limits of detection obtained were 7.37, 8.63, and 9.64 µg kg-1 for selenocysteine, selenomethionine, and seleno-methyl-selenocysteine, respectively. The NADES-extraction is a green procedure with 2 penalty points in the EcoScale. The method was applied to the analysis of powdered milk, lyophilized Se-fortified sheep milk, and ERM-BD151 skimmed milk powder.

Zeolite and bentonite as nickel sequestrants in carbonation lime coming from the sugar industry.

A laboratory trial was performed to test the sequestration capacity of two minerals (bentonite and zeolite) at three initial concentrations (2.5, 5 and 10%) in order to counter water-soluble nickel (Ni) exceeding the Italian legal limit (10 µg L-1) in carbonation lime disposed of in a field and sampled for an 85-day lab study. The results show a noticeable reduction in water-soluble and bioavailable Ni in lime after the addition of sequestrants, especially at the dose of 5% bentonite or zeolite, thereby indicating a "ceiling effect" of the sequestrant, i.e., an increasing dose could reduce the adsorption capacity and be less effective. The alkaline pH and the presence of organic matter could be the main factors affecting the good performance of sequestrant addition, causing an increase in the negative charge of the organic and mineral colloids and the formation of unavailable Ni precipitates. The 85-day experiment seems to be sufficient to reach an adsorption equilibrium for water-soluble nickel, while for the bioavailable form a longer period appears to be necessary.

Current Knowledge on Selenium Biofortification to Improve the Nutraceutical Profile of Food: A Comprehensive Review.

Selenium (Se) is an important micronutrient for living organisms, since it is involved in several physiological and metabolic processes. Se intake in humans is often low and very seldom excessive, and its bioavailability depends also on its chemical form, with organic Se as the most available after ingestion. The main dietary source of Se for humans is represented by plants, since many species are able to metabolize and accumulate organic Se in edible parts to be consumed directly (leaves, flowers, fruits, seeds, and sprouts) or after processing (oil, wine, etc.). Countless studies have recently investigated the Se biofortification of plants to produce Se-enriched foods and elicit the production of secondary metabolites, which may benefit human health when incorporated into the diet. Moreover, feeding animals Se-rich diets may provide Se-enriched meat. This work reviews the most recent literature on the nutraceutical profile of Se-enriched foods from plant and animal sources.