Biomechanical Effects of Different Auxiliary-Aligner Designs for the Extrusion of an Upper Central Incisor: A Finite Element Analysis.

Aim: To evaluate the biomechanical effects of four different auxiliary-aligner combinations for the extrusion of a maxillary central incisor and to define the most effective design through finite element analysis (FEA). Materials and Methods: A full maxillary arch (14 teeth) was modelled by combining two different imaging techniques: cone beam computed tomography and surface-structured light scan. The appliance and auxiliary element geometries were created by exploiting computer-aided design (CAD) procedures. The reconstructed digital models were imported within the finite element solver (Ansys® 17). For the extrusion movement, the authors compared the aligner without an attachment with three auxiliary-aligner designs: a rectangular palatal attachment, a rectangular buccal attachment, and an ellipsoid buccal attachment. The resulting force-moment (MF) system delivered by the aligner to the target tooth and the tooth displacement were calculated for each scenario. Results: The maximum tooth displacement along the z-axis (0.07 mm) was obtained with the rectangular palatal attachment, while the minimum (0.02 mm) was obtained without any attachments. With the ellipsoid attachment, the highest undesired moments M x and M y were found. The rectangular palatal attachment showed the highest F z (2.0 N) with the lowest undesired forces (F x = 0.4 N; F y = -0.2 N). Conclusions: FEA demonstrated that the rectangular palatal attachment can improve the effectiveness of the appliance for the extrusion of an upper central incisor.

Correlation between cephalometric variables and obstructive sleep apnoea severity in children.

AIM: Alterations in craniofacial growth have been associated with obstructive sleep apnoea in children. The main objectives of this study were to analyse the correlation between cephalometric variables and Obstructive Apnea/Hypopnea Index (OAHI) in order to investigate if craniofacial features may influence the severity of obstructive sleep apnoea and to study the correlation between upper nasopharyngeal width and maxillomandibular skeletal discrepancy in sagittal and vertical plane. MATERIALS AND METHODS: Study Design: Correlations between cephalometric variables and obstructive sleep apnoea/hypopnea index and between upper airways space and maxillomandibular skeletal discrepancy were investigated. Forty-seven children with obstructive sleep apnoea diagnosed by overnight sleep study (polysomnography) underwent a lateral radiograph, orthodontic and ear-nose-throat examinations. Cephalometric analysis according to Kirjavainen has been performed to define skeletal and upper airways variables. STATISTICS: Spearman's correlation analysis was performed between OAHI and all cephalometric variables. Pearson's correlation analysis was performed between cephalometric variables of upper airway space and cephalometric variables related to maxillomandibular discrepancy. Chi-square test was used to compare occlusal features with adenoidal and tonsillar hypertrophy. Kruskal-Wallis rank test was used to compare OAHI with occlusal variables and adenotonsillar hypertrophy. RESULTS: The results show a positive correlation between OAHI and maxillomandibular discrepancy measured by ANB angle (rho=0.32; p=0.023). A significant correlation was found between upper nasopharyngeal width and vertical maxillomandibular skeletal discrepancy: 1) ad1-PNS were correlated to Mandibular Plane/Sella- Nasion angle (r=-0.36; p=0.012), Palatal Plane/Mandibular Plane angle (r=-0.39; p=0.007), and Posterior-Anterior Facial Height % (r=0.29; p=0.045); 2) ad2-PNS was correlated to Palatal Plane/Mandibular Plane angle (r=-0.39; p=0.007). No statistically significant differences were found in non-parametric tests between OAHI and occlusal variables or adenoidal and tonsillar hypertrophy. CONCLUSIONS: The present study shows a significant correlation between maxillomandibular discrepancy and the severity of OSA. Moreover, the reduction of nasopharyngeal width was correlated to maxillomandibular hyperdivergent growth pattern. These results support the presence of a correlation between sleep-disordered breathing and craniofacial features even if the cause-effect relation is still unclear. Based on these evidences, we suggest the importance of orthodontic evaluation in the management of paediatric OSA.

Multidisciplinary approach to the treatment of double bilateral upper permanent incisors in a young boy.

BACKGROUND: A double tooth is a rare developmental anomaly referring to the fusion of two adjacent tooth buds or the gemination of a single bud. CASE REPORT: This case report describes the multidisciplinary approach to an 11-year-old patient with two double upper permanent incisors. The clinical intraoral examination showed a mixed dentition with bilateral double maxillary central incisors, molar Class I malocclusion and palatal ectopy of two lateral upper incisors. Computed tomography of the upper dental arch revealed the presence of double central incisors with two distinct roots. The clinical choice consisted of an innovative treatment including surgical, endodontic, orthodontic and restorative treatments. This management protocol produced good aesthetic, healthy and functional results that were stable also two years post-treatment.

Translation and validation of the italian version of the Psychosocial Impact of Dental Aesthetics Questionnaire (pidaq) among adolescents.

AIM: The Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) is a valid tool aiming to evaluate the self-reported influence of dental aesthetics on quality of life. This questionnaire was developed in English for young adults, and later translated and validated with an Italian population. A new version of the questionnaire was recently introduced to be used in adolescents (11-17 years- old), but it had not been translated in Italian yet. Hence, the purpose of this study was to translate, cross-culturally adapt and validate the PIDAQ for adolescents, for its use among Italian subjects. METHODS: To develop the Italian PIDAQ, the original version was translated, back-translated, cross-culturally adapted and pre-tested. Afterwards, the Italian PIDAQ was administered to a convenience sample of 677 subjects, aged 11-17 years, together with two other written questionnaires: the Aesthetic Component of the Index of Orthodontic Treatment Need (IOTN-AC) and the Perception of Occlusion Scale (POS), which are instruments dedicated to assess the self-reported degree of malocclusion. A one-way ANOVA was performed to assess the difference between groups, within each PIDAQ factor, according to POS and IOTN-AC scores. The correlation between PIDAQ factors and POS/IOTN-AC scores was measured as Spearman's rank correlation. The internal consistency was assessed as Cronbach's alpha coef?cient (α), and the test-retest reproducibility as Intra-Class Correlation Coef?cient (ICC). RESULTS: The one-way ANOVA showed that all the factors of the self- reported impact of dental aesthetics on quality of life significantly increased as the degree of malocclusion worsened (P<0.001). Furthermore, all the factors showed statistically significant correlations with both IOTN-AC and POS scores. The α ranged between 0.79 and 0.90, and the ICC ranged between 0.93-0.97. CONCLUSION: The Italian adolescent PIDAQ showed good reliability and validity. The psychometric properties of this version of the questionnaire support its use for the assessment of the psychosocial impact of dental aesthetics among Italian adolescents.

Skeletal and dental effects of Class III orthopaedic treatment: a systematic review and meta-analysis.

To summarise the skeletal, dental and soft tissue effects of orthopaedic treatment on growing skeletal class III patients compared with a concurrent untreated similar control group and to evaluate whether the design of the primary studies may affect the results. A literature search was performed up to the end of February 2016. No restrictions were applied concerning language and appliances. Once the quality score was assessed, a meta-analysis was performed for the appliances used in more than three studies. A moderator analysis for study design was performed. The level of evidence was evaluated by means of the Grades of Recommendation, Assessment, Development and Evaluation (GRADE) tool. The search resulted in 21 papers. The quality of most of the studies was medium. Each study reported skeletal sagittal improvement and overjet correction. Fourteen studies reported a significant increase in lower facial height. Follow-up data showed slight relapses in about 15% of patients. Meta-analyses were performed for the facemask and chin cup. The two appliances were efficient for correcting the sagittal discrepancy, increasing the divergence. In the analysis for study design, the retrospective studies showed a more efficient appliance than RCTs for 6 of 13 variables. The level of evidence was between very low and moderate. There is very low to low evidence that orthopaedic treatment is effective in the correction of Class III skeletal discrepancies and moderate evidence for the correction of the overjet. A common side effect is mandibular clockwise rotation in older subjects.

Evaluation of the relationship between obesity, dental caries and periodontal disease in adolescents.

AIM: To assess the prevalence of caries, oral hygiene quality and periodontal disease in a cohort of obese adolescents compared to a control group. MATERIALS AND METHODS: Study Design: cross-sectional study conducted on 204 subjects (age range 10-16 years). Ninety obese subjects (BMI >90) and 114 normal-weight subjects (BMI <75) were visited at the Bambino Gesù Children's Hospital and in a junior high school in Rome, respectively. An ad hoc questionnaire (investigating demographic and oral health behaviour data) was filled in by patients and their caregivers. Accurate oral examinations were conducted. The Decayed-Missing-Filled Teeth/Surfaces Index in both permanent (DMFT/DMFS) and primary dentition (dmft/dmfs), Gingival Bleeding Index (GBI), Visible Plaque Index (VPI), and Probing Depth (PD) were recorded. STATISTICS: data analysis was carried out using the Statistical Package for the Social Sciences (SPSS 21.0; SPSS IBM, New York, NY). The data of the two groups were compared by means of Student's t Test or the Mann-Whitney test for numerical data and the Chi-square test for categorical data. RESULTS: Patients affected by obesity, compared with controls, presented less compromised teeth in the primary dentition (dmft obese: 0.30 ±± 1.12; normal-weight: 1.00 ± 1.90; P<0.001) and less compromised dental surfaces (dmfs obese: 0.51 ± 2.14; normal-weight: 1.61 ± 3.10; P<0.001). Furthermore obese patients showed minor gingival inflammation with less bleeding on probing (GBI) (obese: 23.95 ± 21.43; normal-weight: 38.17± 24.37; P<0.001), and less probing depth in a greater number of sites (PPD ≤ 3) (obese: 101.92 ± 9.27; normal-weight: 97.28 ± 12.13; P<0.001). Moreover, the obese group showed a better oral hygiene (VPI) (obese: 25.69 ±25.83; normal-weight: 37.72 ±24.34; P<0.001). CONCLUSION: In our study, obese adolescents showed a better oral hygiene, fewer compromised teeth and better periodontal health when compared with normal-weight patients.

Dental and skeletal effects of palatal expansion techniques: a systematic review of the current evidence from systematic reviews and meta-analyses.

The aim was to assess the quality and to summarise the findings of the Systematic Reviews (SRs) and Meta-Analyses (MAs) on the dental and skeletal effects of maxillary expansion. Electronic and manual searches have been independently conducted by two investigators, up to February 2015. SRs and MAs on the dentoalveolar and skeletal effects of fixed expanders were included. The methodological quality was assessed using the AMSTAR (A Measurement Tool to Assess Systematic Reviews). The design of the primary studies included in each SR/MA was assessed with the LRD (Level of Research Design scoring). The evidence for each outcome was rated applying a pre-determined scale. Twelve SRs/MAs were included. The AMSTAR scores ranged from 4 to 10. Two SRs/MAs included only RCTs. The current findings from SRs/MAs support with high evidence a significant increase in the short-term of maxillary dentoalveolar transversal dimensions after Rapid Maxillary Expansion (RME). The same effect is reported with moderate evidence after Slow Maxillary Expansion (SME). However, there is moderate evidence of a non-significant difference between the two expansion modalities concerning the short-term dentoalveolar effects. With both RME and SME, significant increase of skeletal transversal dimension in the short-term is reported, and the skeletal expansion is always smaller than the dentoalveolar. Even though dental relapse to some extent is present, long-term results of the dentoalveolar effects show an increase of the transversal dimension, supported by moderate evidence for RME and low evidence for SME. Skeletal long-term effects are reported only with RME, supported by very low evidence.

Class II functional orthopaedic treatment: a systematic review of systematic reviews.

This Systematic Review (SR) aims to assess the quality of SRs and Meta-Analyses (MAs) on functional orthopaedic treatment of Class II malocclusion and to summarise and rate the reported effects. Electronic and manual searches were conducted until June 2014. SRs and MAs focusing on the effects of functional orthopaedic treatment of Class II malocclusion in growing patients were included. The methodological quality of the included papers was assessed using the AMSTAR (Assessment of Multiple Systematic Reviews). The design of the primary studies included in each SR was assessed with Level of Research Design scoring. The evidence of the main outcomes was summarised and rated according to a scale of statements. 14 SRs fulfilled the inclusion criteria. The appliances evaluated were as follows: Activator (2 studies), Twin Block (4 studies), headgear (3 studies), Herbst (2 studies), Jasper Jumper (1 study), Bionator (1 study) and Fränkel-2 (1 study). Four studies reviewed several functional appliances, as a group. The mean AMSTAR score was 6 (ranged 2-10). Six SRs included only controlled clinical trials (CCTs), three SRs included only randomised controlled trials (RCTs), four SRs included both CCTs and RCTs and one SR included also expert opinions. There was some evidence of reduction of the overjet, with different appliances except from headgear; there was some evidence of small maxillary growth restrain with Twin Block and headgear; there was some evidence of elongation of mandibular length, but the clinical relevance of this results is still questionable; there was insufficient evidence to determine an effect on soft tissues.

Ligneous periodontal lesions in a young child with severe plasminogen deficiency: a case report.

BACKGROUND: Ligneous periodontitis or gingivitis is a rare periodontal disorder, secondary to plasminogen deficiency, characterised by nodular gingival enlargements and progressive destructive membranous periodontal disease. CASE REPORT: We describe the early and successful dental management of a case of ligneous gingivitis secondary to plasminogen deficiency in a 6-year- old girl. The patient was referred because of a nodular asymptomatic gingival hypertrophy with ulceration around the eruption site of tooth 36, without any detectable tooth mobility. After non-surgical management of the lesion and strict follow-up, the first molar erupted completely, with no signs of bone and periodontal disease. CONCLUSION: Ulcerated periodontal lesions could represent the ?rst signs of plasminogen deficiency. The early treatment is essential in preventing infections and the onset of a destructive periodontitis. The paediatric dentist may play a key role in early diagnosis and treatment.

Effect of autoclaving on the surfaces of TiN -coated and conventional nickel-titanium rotary instruments.

AIM: To evaluate the effects of repeated autoclave sterilization cycles on surface topography of conventional nickel-titanium ( NiTi ) and titanium nitride ( TiN )-coated rotary instruments. METHODOLOGY: A total of 60 NiTi rotary instruments, 30 ProTaper (Dentsply Maillefer) and 30 TiN -coated AlphaKite (Komet/Gebr. Brasseler), were analysed. Instruments were evaluated in the as-received condition and after 1, 5 and 10 sterilization cycles. After sterilization, the samples were observed using scanning electron microscope (SEM), and surface chemical analysis was performed on each instrument with energy dispersive X-ray spectroscopy (EDS). Moreover, the samples were analysed by atomic force microscopy (AFM), and roughness average (Ra) and the root mean square value (RMS) of the scanned surface profiles were recorded. Data were analysed by means of anova followed by Tukey's test. RESULT: Scanning electron microscope observations revealed the presence of pitting and deep milling marks in all instruments. EDS analysis confirmed that both types of instruments were composed mainly of nickel and titanium, whilst AlphaKite had additional nitride. After multiple autoclave sterilization cycles, SEM examinations revealed an increase in surface alterations, and EDS values indicated changes in chemical surface composition in all instruments. Ra and RMS values of ProTaper significantly increased after 5 (P = 0.006) and 10 cycles (P = 0.002) with respect to the as-received instruments, whilst AlphaKite showed significant differences compared with the controls after 10 cycles (P = 0.03). CONCLUSIONS: Multiple autoclave sterilization cycles modified the surface topography and chemical composition of conventional and TiN -coated NiTi rotary instruments.

Effects of sodium hypochlorite and ethylenediaminetetraacetic acid on rotary nickel-titanium instruments evaluated using atomic force microscopy.

AIM: To use atomic force microscopy (AFM) to evaluate the effects of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic acid (EDTA) on the surface characteristics of ProTaper rotary nickel-titanium instruments. METHODOLOGY: A total of twenty ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) instruments (S1, S2, F1, F2) were divided into five groups: no immersion, immersion in 5.25% NaOCl for 5 or 10min and immersion in 17% EDTA for 5 or 10min. Twenty surface areas along 3-mm sections at the tip of the files (perfect squares of 1x1µm) were analysed by AFM operating in contact mode under ambient conditions. Three-dimensional images (400x400 lines) were processed using Gwyddion software, and the roughness average (Ra) and the root mean square value (RMS) of the scanned surface profiles were recorded. Data were analysed by means of anova and paired samples t-test. RESULTS: Three-dimensional AFM images of the surface of ProTaper instruments, including new and those immersed in NaOCl and EDTA solutions, revealed topographic irregularities at the nanometric scale. RMS and Ra values of instruments treated with NaOCl and EDTA solutions were statistically higher than that of the new ones (P<0.05). CONCLUSIONS: Atomic force microscopy three-dimensional images and roughness values indicated that short-term contact between NaOCl and EDTA endodontic irrigants and ProTaper instruments caused alterations in the surface of instruments.

Biomineralized porous composite scaffolds prepared by chemical synthesis for bone tissue regeneration.

Scaffold design is a key factor in the clinical success of bone tissue engineering grafts. To date, no existing single biomaterial used in bone repair and regeneration fulfils all the requirements for an ideal bone graft. In this study hydroxyapatite/polycaprolactone (HA/PCL) composite scaffolds were prepared by a wet chemical method at room temperature. The physico-chemical properties of the composite materials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, while scaffold morphology was investigated by scanning electron microscopy (SEM) with energy-dispersive spectroscopy to validate the process used for synthesis. Finally, the response of bone marrow-derived human mesenchymal stem cells (hMSCs) in terms of cell proliferation and differentiation to the osteoblastic phenotype was evaluated using the Alamar blue assay, SEM and alkaline phosphatase activity. Microstructural analysis indicated that the HA particles were distributed homogeneously within the PCL matrix. The biological results revealed that the HA/PCL composite scaffolds are suitable for the proliferation and differentiation of MSCs in vitro, supporting osteogenesis after 15 days. All the results indicate that these scaffolds meet the requirements of materials for bone tissue engineering and could be used for many clinical applications in orthopaedic and maxillofacial surgery.

cAMP induced modifications of HOX D gene expression in prostate cells allow the identification of a chromosomal area involved in vivo with neuroendocrine differentiation of human advanced prostate cancers.

The acquisition of epithelial-neuroendocrine differentiation (ND) is a peculiarity of human advanced, androgen-independent, prostate cancers. The HOX genes are a network of transcription factors controlling embryonal development and playing an important role in crucial adult eukaryotic cell functions. The molecular organization of this 39-gene network is unique in the genome and probably acts by regulating phenotype cell identity. The expression patterns of the HOX gene network in human prostate cell phenotypes, representing different stages of prostate physiology and prostate cancer progression, make it possible to discriminate between different human prostate cell lines and to identify loci and paralogous groups harboring the HOX genes mostly involved in prostate organogenesis and cancerogenesis. Exposure of prostate epithelial phenotypes to cAMP alters the expression of lumbo-sacral HOX D genes located on the chromosomal region 2q31-33 where the cAMP effector genes CREB1, CREB2, and cAMP-GEFII are present. Interestingly, this same chromosomal area harbors: (i) a global cis-regulatory DNA control region able to coordinate the expression of HOX D and contiguous phylogenetically unrelated genes; (ii) a prostate specific ncRNA gene associated with high-risk prostate cancer (PCGEM1); (iii) a series of neurogenic-related genes involved with epithelial-neuronal cell conversion. We report the expression of neurexin 1, Neuro D1, dlx1, and dlx2 in untreated and cAMP treated epithelial prostate cells. The in vivo expression of Neuro D1 in human advanced prostate cancers correlate with the state of tumor differentiation as measured by Gleason score. Thus, we suggest that the chromosomal area 2q 31-33 might be involved in the epithelial-ND characteristic of human advanced prostate cancers.

Evaluation of ovarian functionality after a dietary treatment in obese women with polycystic ovary syndrome.

In women with polycystic ovary syndrome (PCOS) weight loss is associated with an improvement in insulin sensitivity and a reduction of the insulin concentration in the plasma. It is clear, then, that the first therapeutic approach that can be considered in obese PCOS patients for restoration of the menstrual cycle should be a diet. The aim of our study was to examine the effect of long-term caloric restriction on the clinical and biochemical abnormalities in obese PCOS women. The results obtained make it clear that caloric restriction for 4 weeks causes an increase in SHBG and decreases of free testosterone and insulin, with consequent improvement of the clinical picture.

[The cellular and molecular bases of "tooth framing"]. / Le basi cellulari e molecolari della "costruzione" dei denti.

Progress in molecular biology in recent years has enormously increased interest in tooth generation. The enamel knot has been discovered, in consequence. This is a transient structure acting as molecular signaling center, responsible for controlling cusp formation, stimulating growth of surrounding epithelium, and generating new knots or their disappearance through apoptosis. Both tooth development and enamel knots are regulated by a cascade of gene activity where Fgf4, Shh, BMP4, Lef1 and p21 are the prime movers of the processes. Homeobox genes (Msx, Dlx) are the orchestrators of the framing and a series of proteins (adhesion molecules, extracellular matrix components) are the executors of "tooth framing". An important concept has emerged from developmental biology through the identification of the basic mechanisms involved in tooth development: the molecular basis of structure framing shares common rules. Thus similar genetic programs are involved in body structure generation (limb bud, tooth, branching morphogenesis). A deeper understanding of developmental rules regulating tooth formation will make it possible in the near future: a) to modify in vivo homeobox gene expression and restore tooth generation hampered by tooth agenesia due to homeobox gene deregulation; b) to induce complete tooth formation, in case of tooth loss due to trauma or diseases, through implantation in the patient's oral cavity of a synthetic ball containing morphogens and growth factors to stimulate, in the right spatio-temporal sequence, the entire tooth genetic cascade. These concepts will certainly enforce cultural and practical interaction between biology and dentistry.

Usefulness of a 12-month treatment with finasteride in idiophathic and polycystic ovary syndrome-associated hirsutism.

OBJECTIVE: Hirsutism is considered as a skin disease due to increased 5 alpha-reductase activity in the pilosebaceous unit and finasteride is a drug that inhibits this enzymatic activity. This study showed the effectiveness of a chronic treatment with a selective 5 alpha-reductase inhibitor, finasteride, in idiopathic and PCOS-associated hirsutism. METHODS: Finasteride was administered orally at a daily dose of 5 mg for a period of 12 months to 20 women with IH and 20 women with PCOS. MAIN OUTCOME MEASURES: Each group was submitted to clinical (with Ferriman-Gallwey method) and serum hormonal (FSH, LH, 17 beta-estradiol, total and free T, delta 4-androstenedione, DHEAS; dihydrotestosterone, 3 alpha-androstanediol glucuronide) studies at baseline and after 3, 6 and 12 months of treatment. RESULTS: After 3 months of finasteride treatment, a significant decrease in the average hirsutism scores was recorded both in IH (p < 0.0001) and PCOS patients (p < 0.0001). A progressive significant decrease of hirsutism score was observed in IH patients after 6 and 12 months (p < 0.002) and in PCOS patients after 6 but not 12 months. In fact, the maximal therapeutic effect on the hirsutism was obtained after 12 months in the IH and 6 months in PCOS group.