Formulation and Development of Flurbiprofen Colon-Specific Eudragit Coated Matrix Tablets: Use of a Novel Crude Banana Peel Powder as a Time-Dependent Polymer.

The rationale for the current investigation is to study the crude banana peel (CBP) powder efficiency as a novel natural time-dependent polymer along with a pH-sensitive polymer to develop flurbiprofen colon-specific tablets. The direct compression method is utilized to prepare the flurbiprofen-CBP matrix tablets using 9 mm punches on the rotary tableting machine and subsequently coated with Eudragit® S 100 by a dip coating method. The tablets were evaluated for various tableting properties and in vitro drug release studies. From the results of dissolution studies, the F6 formulation showed negligible drug release (5.76% in 5 h) in the upper gastrointestinal tract and progressive release in the colon (99.08% in 24 h). Mean dissolution time, T10%, and T80% were found to be 13.33 h, 5.8 h, and 20.7 h, respectively, which explains the efficiency of the present combination of polymers for colon-specific drug release. From the dissolution studies results of stability studies, the similarity index was calculated and found to be 74.75. In conclusion, utilizing CBP as a natural, time-dependent polymer in conjunction with Eudragit® S 100 to develop the flurbiprofen tablets seems like a promising approach for delivering drugs specifically to the colon.

Quality by design (QbD) approach to develop fast-dissolving tablets using melt-dispersion paired with surface-adsorption method: formulation and pharmacokinetics of flurbiprofen melt-dispersion granules.

Developing amorphous solid dispersions with good flow properties is always challenging for formulation scientists to convert into tablets. Hence, the present study investigates the impact of the combination of melt-dispersion and surface-adsorption methods to prepare melt-dispersion granules with enhanced dissolution rate and flow properties. This study covers the formulation and pharmacokinetic study of fast-dissolving flurbiprofen tablets using PEG 6000 (hydrophilic carrier) and lactose (adsorbent). Response surface methodology (RSM) using the central composite design (CCD) was used to optimize independent variables like carrier concentrations and adsorbent concentrations, and their interactions with the dependent variables (responses), including solubility, angle of repose, Carr's index, and cumulative % drug release, were investigated. The optimized formulation was selected based on the numerical optimization method and further investigated for FTIR spectroscopy, differential scanning calorimetry, and X-ray diffractometry. Then, the optimized formulation was compressed into tablets and evaluated for both in vitro dissolution and in vivo pharmacokinetics parameters. In vitro dissolution studies revealed that the prepared fast-dissolving tablets released the drug entirely within 15 min (Q15 of F4 tablets: 99.34 ± 1.24%), whereas conventional tablets took around 60 min for complete dissolution. Pharmacokinetic studies in rats revealed that fast-dissolving tablets showed 1.38-fold higher peak-plasma concentration (Cmax) and 1.39-fold higher bioavailability than conventional tablets. Overall, this study revealed the successful fabrication of fast-dissolving tablets via melt-dispersion paired with the surface-adsorption method to enhance the flow properties and the dissolution rate.

Enhancement of dissolution rate of racecadotril by liquisolid compact technology

Abstract The current investigation was used to improve the rate of dissolution of an anti-diarrheal drug i.e., racecadotril (RT) at low pH conditions (i.e., in the stomach) by reducing the water secretion and electrolyte in to the intestine by liquisolid tablets. Different formulations (liquisolid) were prepared using Avicel PH 102 as a carrier. Aerosil 200 as a coating material and sodium starch glycolate used as a disintegrant. Polyethylene glycol 200 was used as a non-volatile vehicle to dissolve the drug. FTIR, DSC, XRD and dissolution studies were conducted to characterise liquisolid tablets. Characterisation studies indicated that no interactions between carrier and drug. Solid state characterization had shown a reduction in crystallinity that further supports increment in solubility and dissolution. The optimised formulation showed a significant increase in dissolution i.e., 99.54±0.62% in 30 min compared to directly compressible tablets (38.47±0.26%). The % dissolution efficiency of racecadotril liquisolid tablets 76.86% compared to marketed tablet (27.56%) and conventional direct compression tablet (17.11%). Significant reduction in mean dissolution time of racecadotril from liquisolid tablets (6.84 min) compared to direct compression tablet (44.57 min), indicating faster release of drug and faster onset of action. Formulation of liquisolid tablets could enhance solubility, dissolution and bioavailability of racecadotril

Solubility and dissolution enhancement of flurbiprofen by solid dispersion using hydrophilic carriers

ABSTRACT The intent of the current work is to study the effect of polyethylene glycol 8000 and polyethylene glycol 10000 as hydrophilic carriers on dissolution behaviour of flurbiprofen. In the present study, solvent evaporation method was used to prepare flurbiprofen solid dispersions and evaluated for physico-chemical properties, drug-carrier compatibility studies and dissolution behaviour of drug. Solubility studies showed more solubility in higher pH values and formulations SD4 and SD8 were selected to prepare the fast dissolving tablets. FTIR and DSC study showed no interaction and drug was dispersed molecularly in hydrophilic carrier. XRD studies revealed that there was change in the crystallinity of the drug. The results of In vitro studies showed SD8 formulation confer significant improvement (p<0.05) in drug release, Q20 was 99.08±1.35% compared to conventional and marketed tablets (47.31±0.74% and 56.86±1.91%). The mean dissolution time (MDT) was reduced to 8.79 min compared to conventional and marketed tablets (25.76 and 22.22 min.) indicating faster drug release. The DE (% dissolution efficiency) was increased by 2.5 folds (61.63%) compared to conventional tablets (23.71%). From the results, it is evident that polyethylene glycol solid dispersions in less carrier ratio may enhance the solubility and there by improve the dissolution rate of flurbiprofen.

Formulation and Pharmacokinetic Evaluation of Polymeric Dispersions Containing Valsartan.

BACKGROUND: Valsartan exhibits poor aqueous solubility and dissolution rate limited absorption. The lower solubility in the upper part of gastrointestinal tract (pH-dependant solubility) where its absorption window exists further contributes to the low oral bioavailability of valsartan. OBJECTIVE: The present work was aimed to improve the in vivo pharmacokinetics of valsartan by preparing amorphous polymeric dispersions using Eudragit E 100 as carrier. Eudragit E 100 is a cationic polymer soluble in gastric fluid up to pH 5.0 and exhibits pH-dependent release. Hence, the dispersions prepared using Eudragit E 100 rapidly dissolves at lower pH presenting drug in molecularly dispersed and soluble form at its absorption site. METHODS: Polymeric solid dispersions were prepared in different drug-to-carrier ratios. The prepared dispersions were evaluated for drug-carrier interactions, solid-state transitions and drug-release properties with the help of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and in vitro dissolution studies. The optimized formulation containing valsartan was tested in rats for bioavailability and pharmacokinetic parameters and compared with that of valsartan pure drug. RESULTS: The results from FTIR studies indicated no interactions between drug and excipients. DSC studies confirmed reduction in crystallinity of drug. The dissolution studies performed in 0.1 N HCl showed significant improvement (p < 0.05) in the dissolution of valsartan. In vivo pharmacokinetic studies showed 199 % relative bioavailability with significant improvement (p < 0.05) in area under the curve compared to valsartan pure drug. CONCLUSION: Eudragit E 100 can be used to improve the dissolution of drugs that show low solubility at lower pH and thereby enhancing the bioavailability.

Formulation and pharmacokinetics of gelucire solid dispersions of flurbiprofen.

CONTEXT: Development of solid dispersions is to improve the therapeutic efficacy by increasing the drug solubility, dissolution rate, bioavailability as well as to attain rapid onset of action. OBJECTIVE: The present research deals with the development of solid dispersions of flurbiprofen which is poorly water soluble to improve the solubility and dissolution rate using gelucires. MATERIALS AND METHODS: In this study, solid dispersions were prepared following solvent evaporation method using gelucire 44/14 and gelucire 50/13 as carriers in different ratios. Then the formulations were evaluated for different physical parameters, solubility studies, DSC, FTIR studies and in vitro dissolution studies to select the best formulation that shows rapid dissolution rate and finally subjected to pharmacokinetic studies. RESULTS AND DISCUSSION: From the in vitro dissolution study, formulation F3 showed the better improvement in solubility and dissolution rate. From the pharmacokinetic evaluation, the control tablets produced peak plasma concentration (Cmax) of 9140.84 ± 614.36 ng/ml at 3 h Tmax and solid dispersion tablets showed Cmax = 11 445.46 ± 149.23 ng/ml at 2 h Tmax. The area under the curve for the control and solid dispersion tablets was 31 495.16 ± 619.92 and 43 126.52 ± 688.89 ng h/ml and the mean resident time was 3.99 and 3.68 h, respectively. CONCLUSION: From the above results, it is concluded that the formulation of gelucire 44/14 solid dispersions is able to improve the solubility, dissolution rate as well as the absorption rate of flurbiprofen than pure form of drug.