RESUMO
BACKGROUND: This study focuses on the determination and classification of patients as rapid or slowcalculusformersbasedontherateofcalculusformationafteroralprophylaxis. It also aims to determine the factors that positively impact the formation and deposition of calculus in patients and identify the factors that accelerate or decelerate the deposition of calculus. METHODS: The study was conducted in the Department of Periodontology, Dr Harvansh Singh Judge Institute of Dental Sciences and Hospital, Panjab University Chandigarh, India. We examined 51 patients after a month of the oral prophylaxis, recorded the amount of calculus present in the oral cavity, and then recorded a detailed history which was briefly divided into Age, Sex, Residence, Oral habits, and maintenance of oral hygiene. RESULTS: An evident and meaningful link was found between age and the rate at which dental calculus forms. The average age of individuals differed significantly between the rapid and slow calculus formers, which could be ascribed to the decline in manual dexterity as age increases, resulting in less effective oral hygiene habits, including toothbrushing. None of the other factors dietary and oral hygiene related could be identified distinctly, probably owing to the small sample of the study. The oral health status exhibited a significant difference between slow and rapid calculus formers. CONCLUSIONS: Within the limitations of the study, the data analyzed, identified age as a significant determinant that impact the rate of formation of calculus in patients and reported a significant difference in the oral health status of rapid and slow calculus formers.
Assuntos
Cálculos Dentários , Higiene Bucal , Escovação Dentária , Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Fatores Etários , Adulto Jovem , Escovação Dentária/estatística & dados numéricos , Índia/epidemiologia , Fatores Sexuais , Idoso , Prevalência , Profilaxia Dentária , Adolescente , Fatores de TempoRESUMO
The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.
Assuntos
Defeitos da Furca , Raiz Dentária , Humanos , Raiz Dentária/anatomia & histologia , Dente Molar/cirurgia , Dente Molar/anatomia & histologia , Colo do Dente , Prognóstico , Biometria , Defeitos da Furca/cirurgia , Defeitos da Furca/diagnósticoRESUMO
Purpose: The awkward and repetitive movements lead to tissue straining, potentially leading to painful musculoskeletal disorders (MSDs). MSDs in dentists result in work inefficiency and a reduction in work hours. A survey was conducted to assess the prevalence of MSDs amongst the dental population of interest. Methods: Customized individual detail questionnaires, Standard Nordic Musculoskeletal questionnaires, and Level of Pain estimation using the Likert Scale were used to deduce the various responsible risk factors for the occurrence of MSDs in dentists. Inferential statistical analysis was done to identify the prevalence and severity of the MSDs. The Chi-Square test (95 % confidence interval) was used to identify and compare the association of risk factors involved in MSDs with the occurrence of the Effect of MSDs, the presence of MSDs, and the severity of the MSDs. Results: The results of the study deduced that the dentists followed the sedentary work practices. The dentists experienced maximum discomfort in the neck region, which was accompanied by the discomfort experienced in the lower back, hands and wrists, making the upper extremity being more susceptible to the MSDs. Gender risk factors the, the prevalence of MSDs in the dentist's upper back, and the severity of pain in the upper back region showed a significant association level. Conclusion: The wrist posture, the prevalence of MSDs and the severity of pain in the dentists' neck, shoulder and upper back showed a significant association level.
RESUMO
This umbrella review aimed to determine the various drugs used to treat trigeminal neuralgia (TN) and to evaluate their efficacies as well as side effects by surveying previously published reviews. An online search was conducted using PubMed, CRD, EBSCO, Web of Science, Scopus, and the Cochrane Library with no limits on publication date or patients' gender, age, and ethnicity. Reviews and meta-analyses of randomized controlled trials pertaining to drug therapy for TN, and other relevant review articles added from their reference lists, were evaluated. Rapid reviews, reviews published in languages other than English, and reviews of laboratory studies, case reports, and series were excluded. A total of 588 articles were initially collected; 127 full-text articles were evaluated after removing the duplicates and screening the titles and abstracts, and 11 articles were finally included in this study. Except for carbamazepine, most of the drugs had been inadequately studied. Carbamazepine and oxcarbazepine continue to be the first choice for medication for classical TN. Lamotrigine and baclofen can be regarded as second-line drugs to treat patients not responding to first-line medication or for patients having intolerable side effects from carbamazepine. Drug combinations using carbamazepine, baclofen, gabapentin, ropivacaine, tizanidine, and pimozide can yield satisfactory results and improve the tolerance to the treatment. Intravenous lidocaine can be used to treat acute exaggerations and botulinum toxin-A can be used in refractory cases. Proparacaine, dextromethorphan, and tocainide were reported to be inappropriate for treating TN. Anticonvulsants are successful in managing trigeminal neuralgia; nevertheless, there have been few studies with high levels of proof, making it challenging to compare or even combine their results in a statistically useful way. New research on other drugs, combination therapies, and newer formulations, such as vixotrigine, is awaited. There is conclusive evidence for the efficacy of pharmacological drugs in the treatment of TN.
RESUMO
Reusing of alloy has become a need of time due to the increasing demand, depletion of resources, and substantial increase in their price. The alloys used require a long-term stay in the oral cavity exposed to a wet environment, so they must have good wear resistance, biocompatibility, and mechanically good strength. In this study, the vertical marginal discrepancy, surface roughness, and microhardness of the new and recast nickel-chromium (base metal) alloys were evaluated. 125 wax patterns were fabricated from a customized stainless steel master die with a heavy chamfer cervical margin divided into 5 groups. Each group had 25 samples. Group A: 25 wax patterns were cast using 100% by weight of new alloy, Group B: the casting was done by using 75% new alloy and 25% alloy by weight, Group C: wax patterns were cast using 50% new alloy and 50% alloy, Group D: 25% new alloy and 75% alloy and Group E: 100% recast alloy. The vertical marginal discrepancy was measured by an analytical scanning microscope, microhardness was tested on a universal testing machine, and surface roughness was on a tester of surface roughness. Castings produced using new alloys were better than those obtained with reused alloys. Alloys can be reused till 50% by weight along with the new alloy and accelerated casting technique can be used to save the lab time to fabricate castings with acceptable vertical marginal discrepancy, microhardness, and surface roughness. This indicated that 50% recasting of (Ni-Cr) can be used as a good alternative for the new alloy from an economical point of view.
RESUMO
Biopolymers are organic polymers that can be treated into intricate designs with porous characteristics that mimic essential biologic components. Due to their superior biosafety, biodegradability, biocompatibility, etc., they have been utilized immensely in biomedical engineering, regeneration, and drug delivery. To obtain the greatest number of results, a literature search was undertaken in scientific search engines utilizing keywords. Chitosan is used in a variety of medical sectors, with the goal of emphasizing its applications and benefits in the clinical dental industry. Chitosan can be dissolved in liquid form and combined with other substances to create a variety of products, including fibers, hydrogels, membranes, microspheres, resins, sponges, pastes, tablets, and micro granules. Chitosan has been studied in a variety of dental applications. Chitosan is used in the prevention of caries and wear, in pulpotomy to accelerate osteogenesis in guided tissue regeneration due to its hemostatic property, and primarily to benefit from its antimicrobial activity by adding it to materials, such as glass ionomer cement, calcium hydroxide, and adhesive systems. With its antibacterial activity and biocompatibility, chitosan is leading the pack as a promising ingredient in the production of dental materials. The current review provides an update on the background, fundamentals, and wide range of uses of chitosan and its gels in dental science.
RESUMO
BACKGROUND: Evaluation of the working postures and development of new techniques are paramount in reducing the awkward postures and occurrence of musculoskeletal disorders (MSDs). The Kinect sensor, a portable and cost-effective device, appears to be a promising alternative to study work postures. OBJECTIVE: The current study aimed to evaluate the validity of Kinect against the gold-standard instrument (electro-goniometers) for body joint angle measurements. METHODS: A unique software application was developed to measure the critical body joint angles for postural evaluation by using the Kinect's skeletal tracking feature. The body joint angle data of ten volunteers were measured simultaneously by both Kinect and electro-goniometers. The validation analysis was conducted in both static and dynamic domains of application. RESULTS: Minimal variation was observed between the two techniques, and the Kinect correlated well for upper-arm joint angles of 45∘, 60∘ and 90∘; lower-arm joint angles of 30∘, 45∘, 60∘, and 90∘; straight neck position, neck joint angle at maximum possible flexion; straight trunk position, trunk bend angle at full flexion. In dynamic analysis, four out of five ICC values were > 0.75 except for the upper arm. Discrepancies in the results indicated the disapproval of Kinect for only wrist measurements. CONCLUSION: The results of the static and dynamic studies gave a sufficient basis to consider the Kinect tool as an alternative to contemporary posture-based ergonomic evaluation methods.
Assuntos
Postura , Software , Humanos , Reprodutibilidade dos Testes , Ergonomia , Extremidade Superior , Fenômenos BiomecânicosRESUMO
OBJECTIVES: This study aimed to compare the effectiveness of an experimental root canal irrigant and 17% Ethylene-di-amine tetra acetic acid for removal of the smear layer in the coronal, middle and apical portions of the root canal. MATERIALS AND METHODS: Ninety human single rooted maxillary and mandibular teeth were selected for this study. The teeth were randomly divided into two experimental groups and one control group as follows: Group A (Ethanolic extract of Sapindus Mukorossi), Group B (17% EDTA), and Group C (Distilled water). The root canals of all three groups were prepared with stainless steel K-files by means of the standard step-back technique and irrigated with 5.25% sodium hypo chloride. The teeth were decoronated, following the irrigation and divided longitudinally into two-halves and visualized using scanning electron microscope (SEM) for the amount of smear layer present utilizing the three-point score system. The observations were noted both before and after the treatment. Nonparametric tests were applied for the comparison and p-value ⩽ 0.05 was considered as statistically significant. RESULTS: It was evident from that smear layer was completely removed in coronal portion of 27 out of 30 teeth in-group A. For middle and apical areas of group A, 24 and 19 teeth showed complete smear layer removal. In-group B it was found that there were 24, 21, and 3 teeth at coronal, middle and apical, areas respectively where smear layer were completely absent. Intra group comparison showed a significant difference (p = 0.002) in smear layer removal was found for group A at coronal, middle and apical thirds. Similarly, a significant difference (p = 0.001) was also found for group B; however heavy smear layer was found among the three parts of the canal for group C. CONCLUSIONS: Ethanolic extract of Sapindus Mukorossi have higher effectiveness in removing the smear layer from the root canal in comparison to 17% EDTA.
Assuntos
Ácido Edético , Irrigantes do Canal Radicular , Tratamento do Canal Radicular , Sapindus , Camada de Esfregaço , Raiz Dentária , Humanos , Cavidade Pulpar/diagnóstico por imagem , Cavidade Pulpar/efeitos dos fármacos , Ácido Edético/farmacologia , Microscopia Eletrônica de Varredura , Irrigantes do Canal Radicular/farmacologia , Preparo de Canal Radicular/métodos , Camada de Esfregaço/tratamento farmacológico , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/efeitos dos fármacos , Tratamento do Canal Radicular/métodos , Extratos Vegetais/administração & dosagem , Extratos Vegetais/uso terapêutico , Doenças Dentárias/tratamento farmacológico , Doenças Dentárias/terapia , FitoterapiaRESUMO
The data on how lifestyle factors of school-going children affect their oral health are not sufficient; therefore, there is a need to analyze the adverse effects of poor lifestyle habits and the role of mothers' education on oral health. The aim of this study was to analyze the association of socioeconomic and lifestyle factors with the oral health status of school-going children through a structured questionnaire and oral examination. Ninety-five (26.5%) children were from class 1. One hundred eighty-seven (52.1%) mothers were educated while 172 (47.9%) were uneducated. Two hundred seventy-six (76.9%) children had never visited the dentist. The results indicate that dental health behavior is associated with lifestyle factors as well as socio-demographic variables. Parent education and awareness regarding oral health plays a major role in determining the oral health of children.
RESUMO
BACKGROUND: Endodontically treated teeth are structurally more susceptible to root fractures. Proper tooth restorations with digitally fabricated or fibre post following endodontic therapy is essential to restore function and esthetics. OBJECTIVE: The aim of this in vitro study is to evaluate the fracture load of digitally fabricated and prefabricated fibre posts in endodontically treated teeth. METHODS: Sixty extracted human single rooted teeth were selected. The crowns were sectioned at the cement-enamel junction to standardize the remaining root length at 15 mm from the apices. Cleaning, shaping and obturation was done using conventional step back technique to an ISO K-file size 40. The roots were divided into two groups of 30 samples each: Group S: teeth reinforced with digitally fabricated posts; Group F: teeth reinforced with fibre posts. Each group was further divided into three subgroups (S7, S9, S12, F7, F9, F12) based on lengths 7, 9 and 12 mm at which the posts were cemented. Composite resin core was fabricated and prepared to receive a complete metal crown. Universal testing machine was used to measure the compressive load required to fracture the teeth. RESULTS: The highest fracture resistance of 1532N was observed with fibre posts at 12 mm of post space length followed by digitally fabricated post 1398N at 12 mm, but the difference was not statistically significant. CONCLUSION: The highest fracture resistance was observed in the teeth restored with fibre posts with 12 mm length and the lowest with digitally fabricated post with 7 mm length. As the length of post increases irrespective of type of post fracture resistance increased.
Assuntos
Fraturas Ósseas , Técnica para Retentor Intrarradicular , Fraturas dos Dentes , Dente não Vital , Humanos , Dente não Vital/terapia , Vidro , CoroasRESUMO
Dental anxiety is one of the most common conditions present amongst the masses globally. It is this fear that makes individuals avoid seeking dental treatment which results in a deteriorated oral health-related quality of life (OHRQoL). Discrepancies exist in the prevalence of dental anxiety based on gender, education levels, level of deprivation of a society and its socioeconomic status. In this study, a sample size of 522 respondents was collected. Kuppuswamy's socioeconomic status scale and modified dental anxiety scales were used to collect the necessary data. These data were analyzed by cross tabbing and chi-square test of significance was applied to assess the association between dental anxiety and other factors. Female gender was significantly associated with dental anxiety with p-value = 0.03. Higher education levels and dental anxiety also displayed significant associations with each other, with a p-value of 0.048. Seventy-six percent of the individuals of lower socioeconomic status were prone to be more dentally anxious. Dental anxiety was more significant in individuals with higher levels of education in our study. Respondents who were part of a lower socioeconomic class were also more prone to being anxious while receiving dental treatment. Knowing the factors that cause dental anxiety can help dentists effectively manage and treat their patients.
RESUMO
This study aimed to analyze the existing literature on how artificial intelligence is being used to support the identification of cephalometric landmarks. The systematic analysis of literature was carried out by performing an extensive search in PubMed/MEDLINE, Google Scholar, Cochrane, Scopus, and Science Direct databases. Articles published in the last ten years were selected after applying the inclusion and exclusion criteria. A total of 17 full-text articles were systematically appraised. The Cochrane Handbook for Systematic Reviews of Interventions (CHSRI) and Newcastle-Ottawa quality assessment scale (NOS) were adopted for quality analysis of the included studies. The artificial intelligence systems were mainly based on deep learning-based convolutional neural networks (CNNs) in the included studies. The majority of the studies proposed that AI-based automatic cephalometric analyses provide clinically acceptable diagnostic performance. They have worked remarkably well, with accuracy and precision similar to the trained orthodontist. Moreover, they can simplify cephalometric analysis and provide a quick outcome in practice. Therefore, they are of great benefit to orthodontists, as with these systems they can perform tasks more efficiently.
RESUMO
The present study aimed to analyze mid horizontal facial third proportions, those being the interpupillary, inner intercanthal, and bizygomatic distance modified with golden proportion, The Preston proportion, golden percentage and 70% recurring esthetic dental proportion were used for determining maxillary anterior teeth width. A total of 230 participants took part in this study. The front dental and facial photographs along dental stone cast which were converted to three-dimensional (3D) models were used for evaluation. The mid horizontal facial third proportions showed no significant relationship with maxillary anterior teeth width without modification with dental proportions. Whereas, with modification, no statistically significant difference was found between inner-intercanthal distance by golden percentage and width of central incisors. The bizygomatic distance was greater than intercanine distance. While the interpupillary distance by golden proportion was found to be consistent with intercanine distance in female participants. The modified anterior teeth width was significantly different from measured values, when determined by using the three mid facial proportions with Preston and 70% recurring esthetic dental (RED) proportion. Furthermore, the measured width of maxillary anterior teeth showed no difference when plaster dental casts widths were compared with 3D models. The interpupillary, inner-intercanthal, and bizygomatic distance should not be directly used to determine maxillary anterior teeth width. While maxillary anterior teeth width can be determined by modifying the inner inter-canthal distance with golden percentage and interpupillary distance with golden proportion. Moreover, the midfacial third proportions modified with Preston and 70% recurrent esthetic dental proportion were found to be unreliable for the determination of maxillary anterior teeth widths.
RESUMO
The objective of this study was to investigate general dentists' observations of various aesthetic dental procedures among social media users. A cross-sectional study was conducted at the Department of Prosthodontics, Altamash Institute of Dental Medicine, over a duration of six months. Data were collected using a well-structured questionnaire comprising 21 predefined responses. The questionnaire was uploaded and disseminated through Google Surveys by forwarding web page links through emails and WhatsApp. The data collected were analysed through Statistical Package for Social Sciences (SPSS-Version 25). The majority (90.7%) of the dental practitioners surveyed believed that there is an increase in the demand for aesthetic dental procedures and social media is a major contributor to it. Moreover, most of the 377 (81.8%) participants agreed that social media is a beneficial platform enabling them to educate, advertise, and communicate with patients. Concerning popular aesthetic procedures, teeth whitening (54.7%), Hollywood smile (17.1%), dental veneers (11.9%), and Invisalign (10.4%) were the most commonly demanded aesthetic procedures. The patients showed desire for these procedures because they were trending on social media platforms. Almost half of the general dental practitioners used social media to post their content related to aesthetic dentistry and to promote their work. They preferred using before and after pictures (48.6%) for advertising their content related to aesthetic dentistry. Within the limitations of the study, it is concluded that the demand for aesthetic dentistry is rapidly growing, and social media is the main driving force behind this revolution as the general population has direct access to the profiles of celebrities and influencers, who all appear to have 'the perfect smile'. This shift in people's self-image has created a surge in patients seeking cosmetic treatments.
RESUMO
Background and Objective: Gingival biotype can be assessed using a variety of invasive and non-invasive procedures, such as direct probing, transgingival probing, ultrasound-guided approaches, and, for the more sophisticated, cone-beam computed tomography. The aim of this study was to evaluate gingival biotype in relation to transgingival probing and cone-beam computed tomography (CBCT). Materials and Methods: This study included a total of two hundred healthy individuals. Gingival thickness was assessed and measured from the right and left maxillary central incisor teeth using CBCT and transgingival probing of the attached gingiva. The measurements were analyzed with regard to tooth type (central incisor). Linear measurements for gingival biotype were measured using both methods. Correlations and differences between measurement methods were assessed. Results: The mean age of study participants was 32.49 ± 8.61 years. The radiographic measurements on CBCT were 1.34 ± 0.17 mm for the right central and 1.28 ± 0.21mm for the left central. The transgingival probing measurements were 1.31 ± 0.18 for the right central and 1.22 ± 0.21mm for the left central. Conclusion: As per the results of this study, there is a significant positive correlation between transgingival probing and CBCT measurements of gingival biotypes.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Incisivo , Adulto , Tomografia Computadorizada de Feixe Cônico/métodos , Gengiva/diagnóstico por imagem , Humanos , Incisivo/diagnóstico por imagem , Maxila/diagnóstico por imagem , Adulto JovemRESUMO
Background and Objectives: The elicitation of a host's immune−inflammatory responses to overcome oral bacterial biofilm challenges is mediated by numerous cytokines. We explored the role of three such cytokines, viz. interleukin (IL)-17, 18 and 21, by measuring their levels in the gingival crevicular fluid (GCF) of Indian individuals with healthy gingiva, chronic gingivitis, or chronic periodontitis. Materials and Method: Ninety systemically healthy individuals were enrolled in the study on the basis of predefined criteria and were categorized into three groups of 30 participants each. Groups A, B and C were composed of a control group with healthy gingiva, subjects with chronic gingivitis and subjects with chronic periodontitis, respectively. The periodontal disease status was assessed on the basis of a subject's gingival index, probing pocket depth, clinical attachment loss and radiographic evidence of bone loss. After the complete history-taking and identification of gingival sulcus/pocket depth areas for GCF collection, a sample was collected from each subject in all groups for an estimation of the cytokine levels using ELISA. Statistical analysis was performed using SPSS v 21.0. Intergroup comparisons were conducted using a post hoc Tukey's test. A value of p < 0.05 was considered to be statistically significant. Results: The mean IL-17, 18 and 21 concentrations in pg/mL was the greatest for Group C (99.67 ± 18.85, 144.61 ± 20.83 and 69.67 ± 12.46, respectively), followed by Group B (19.27 ± 2.78, 22.27 ± 2.43 and 22.74 ± 1.43, respectively) and finally by Group A (healthy control; 11.56 ± 0.99, 17.94 ± 1.24 and 12.83 ± 1.21 respectively). A statistically significant difference in the mean concentrations of two interleukins (IL-17 and IL-18) was observed between Groups A and C and also between Groups B and C. A statistically significant difference in the mean concentrations of IL-21 was observed between Groups B and C. Conclusions: Within the limitations of the present study, the findings revealed that the GCF levels of IL-17, IL-18 and IL-21 rose and correlated well with the severity of the disease. Thus, these cytokines present in GCF have the potential to be considered as biomarkers for periodontal tissue destruction. IL-21 in particular appears to be a promising biomarker for differentiating between gingivitis and periodontitis.
Assuntos
Periodontite Crônica , Gengivite , Biomarcadores/análise , Citocinas/análise , Líquido do Sulco Gengival/química , Humanos , Interleucina-17/análise , Interleucina-18 , Perda da Inserção PeriodontalRESUMO
Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey's multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.
Assuntos
Bebidas , Cerâmica , Teste de Materiais , Propriedades de Superfície , ÁguaRESUMO
Nanotechnology provides solutions by combining the fields of textiles and medicine to prevent infectious microbial spread. Our study aimed to evaluate the antimicrobial activity of nanofiber sheets incorporated with a well-known antibiotic, ceftriaxone. It is a third-generation antibiotic that belongs to the cephalosporin group. Different percentages (0, 5%, 10%, 15%, and 20%; based on polymer wt%) of ceftriaxone were incorporated with a polymer such as polyvinyl alcohol (PVA) via electrospinning to fabricate nanofiber sheets. The Kirby-Bauer method was used to evaluate the antimicrobial susceptibility of the nanofiber sheets using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). For the characterization of the nanofiber sheets incorporated with the drug, several techniques were used, such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Our results showed that the nanofiber sheets containing ceftriaxone had potential inhibitory activity against E. coli and S. aureus as they had inhibition zones of approximately 20-25 mm on Mueller-Hinton-agar-containing plates. In conclusion, our nanofiber sheets fabricated with ceftriaxone have potential inhibitory effects against bacteria and can be used as a dressing to treat wounds in hospitals and for other biomedical applications.
RESUMO
Coronavirus disease 2019 (COVID-19) first emerged in Wuhan city in December 2019, and became a grave global concern due to its highly infectious nature. The Severe Acute Respiratory Coronavirus-2, with its predecessors (i.e., MERS-CoV and SARS-CoV) belong to the family of Coronaviridae. Reportedly, COVID-19 has infected 344,710,576 people around the globe and killed nearly 5,598,511 persons in the short span of two years. On November 24, 2021, B.1.1.529 strain, later named Omicron, was classified as a Variant of Concern (VOC). SARS-CoV-2 has continuously undergone a series of unprecedented mutations and evolved to exhibit varying characteristics. These mutations have largely occurred in the spike (S) protein (site for antibody binding), which attribute high infectivity and transmissibility characteristics to the Omicron strain. Although many studies have attempted to understand this new challenge in the COVID-19 strains race, there is still a lot to be demystified. Therefore, the purpose of this review was to summarize the structural or virologic characteristics, burden, and epidemiology of the Omicron variant and its potential to evade the immune response.
RESUMO
There are more than 30 species of Glycyrrhiza genus extensively spread worldwide. It was the most prescribed herb in Ancient Egyptian, Roman, Greek, East China, and the West from the Former Han era. There are various beneficial effects of licorice root extracts, such as treating throat infections, tuberculosis, respiratory, liver diseases, antibacterial, anti-inflammatory, and immunodeficiency. On the other hand, traditional medicines are getting the attraction to treat many diseases. Therefore, it is vital to screen the medicinal plants to find the potential of new compounds to treat chronic diseases such as respiratory, cardiovascular, anticancer, hepatoprotective, etc. This work comprehensively reviews ethnopharmacological uses, phytochemistry, biological activities, clinical evidence, and the toxicology of licorice, which will serve as a resource for future clinical and fundamental studies. An attempt has been made to establish the pharmacological effect of licorice in different diseases. In addition, the focus of this review article is on the molecular mechanism of licorice extracts and their four flavonoids (isoliquiritigenin, liquiritigenin, lichalocone, and glabridin) pharmacologic activities. Licorice could be a natural alternative for current therapy to exterminate new emerging disorders with mild side effects. This review will provide systematic insights into this ancient drug for further development and clinical use.