Spatial and temporal variation in the prevalence of illegal lead shot in reared and wild mallards harvested in England.

The use of lead shotgun ammunition for shooting wildfowl has been restricted in England since 1999, but surveys finding lead shot in harvested birds show compliance with regulations has been low. Following the announcement in 2020 of a voluntary transition from lead to non-lead shot by UK shooting organizations, we investigated spatiotemporal variation in the composition of ammunition used for shooting mallards Anas platyrhynchos. We collected 176 harvested mallards during the 2021/22 shooting season and analyzed recent shot extracted from carcasses to determine shot composition. Using a separate collection of ducks of known provenance, we used stable isotope analysis as a means of differentiating captive-reared from wild mallards. This allowed us to understand how compliance might vary between driven game shooters, characterized by shooting birds that are flushed over a stationary line of shooters, and who primarily harvest captive-reared and released ducks, and wild duck shooters. Of 133 mallards containing recent shot, 92 (69%) had been illegally shot with lead. Analysis of this and five comparable surveys between 2001 and 2019 indicates regional and temporal variation in lead shot presence in England. In the North West and West Midlands, the likelihood of mallards containing lead shot decreased significantly over time, but no other regions showed significant changes. The use of non-lead shot types varied over time, with increases in steel shot use approximately matched by declines in bismuth shot. Mallards likely to be reared were more likely to have been shot with lead (75%) than those likely to be wild (48%). This suggests the use of lead shot is more frequent among driven game shooters than wild duck shooters. In England in 2021/22, most mallards continued to be shot with lead, suggesting that neither legislation nor voluntary approaches have been effective in substantially reducing illegal use of lead shot.

Molecular organization of fibroin heavy chain and mechanism of fibre formation in Bombyx mori.

Fibroins' transition from liquid to solid is fundamental to spinning and underpins the impressive native properties of silk. Herein, we establish a fibroin heavy chain fold for the Silk-I polymorph, which could be relevant for other similar proteins, and explains mechanistically the liquid-to-solid transition of this silk, driven by pH reduction and flow stress. Combining spectroscopy and modelling we propose that the liquid Silk-I fibroin heavy chain (FibH) from the silkworm, Bombyx mori, adopts a newly reported ß-solenoid structure. Similarly, using rheology we propose that FibH N-terminal domain (NTD) templates reversible higher-order oligomerization driven by pH reduction. Our integrated approach bridges the gap in understanding FibH structure and provides insight into the spatial and temporal hierarchical self-assembly across length scales. Our findings elucidate the complex rheological behaviour of Silk-I, solutions and gels, and the observed liquid crystalline textures within the silk gland. We also find that the NTD undergoes hydrolysis during standard regeneration, explaining key differences between native and regenerated silk feedstocks. In general, in this study we emphasize the unique characteristics of native and native-like silks, offering a fresh perspective on our fundamental understanding of silk-fibre production and applications.

Multicolor Photoluminescent Carbon Dots à La Carte for Biomedical Applications.

Dual-emission fluorescence probes that provide high sensitivity are key for biomedical diagnostic applications. Nontoxic carbon dots (CDs) are an emerging alternative to traditional fluorescent probes; however, robust and reproducible synthetic strategies are still needed to access materials with controlled emission profiles and improved fluorescence quantum yields (FQYs). Herein, we report a practical and general synthetic strategy to access dual-emission CDs with FQYs as high as 0.67 and green/blue, yellow/blue, or red/blue excitation-dependent emission profiles using common starting materials such as citric acid, cysteine, and co-dopants to bias the synthetic pathway. Structural and physicochemical analysis using nuclear magnetic resonance, absorbance and fluorescence spectroscopy, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy in addition to transmission electron and atomic force microscopy (TEM and AFM) is used to elucidate the material's composition which is responsible for the unique observed photoluminescence properties. Moreover, the utility of the probes is demonstrated in the clinical setting by the synthesis of green/blue emitting antibody-CD conjugates which are used for the immunohistochemical staining of human brain tissues of glioblastoma patients, showing detection under two different emission channels.

Direct visualization of sequence-specific DNA binding by gonococcal type IV pili.

Neisseria gonorrhoeae, the causative agent of gonorrhoea, is a major burden on global healthcare systems, with an estimated ~80-90 million new global cases annually. This burden is exacerbated by increasing levels of antimicrobial resistance, which has greatly limited viable antimicrobial therapies. Decreasing gonococcal drug susceptibility has been driven largely by accumulation of chromosomal resistance determinants, which can be acquired through natural transformation, whereby DNA in the extracellular milieu is imported into cells and incorporated into the genome by homologous recombination. N. gonorrhoeae possesses a specialized system for DNA uptake, which strongly biases transformation in favour of DNA from closely related bacteria by recognizing a 10-12 bp DNA uptake sequence (DUS) motif, which is highly overrepresented in their chromosomal DNA. This process relies on numerous proteins, including the DUS-specific receptor ComP, which assemble retractile protein filaments termed type IV pili (T4P) extending from the cell surface, and one model for neisserial DNA uptake proposes that these filaments bind DNA in a DUS-dependent manner before retracting to transport DNA into the periplasm. However, conflicting evidence indicates that elongated pilus filaments may not have such a direct role in DNA binding uptake as this model suggests. Here, we quantitatively measured DNA binding to gonococcal T4P fibres by directly visualizing binding complexes with confocal fluorescence microscopy in order to confirm the sequence-specific, comP-dependent DNA binding capacity of elongated T4P fibres. This supports the idea that pilus filaments could be responsible for initially capturing DNA in the first step of sequence-specific DNA uptake.

Rapid Detection of Neisseria gonorrhoeae Genomic DNA Using Gold Nanoprobes Which Target the Gonococcal DNA Uptake Sequence.

The rapid spread of antimicrobial resistant Neisseria gonorrhoeae continues to pose a serious threat to global health. To successfully treat and control gonococcal infections, rapid diagnosis is critical. Currently, nucleic acid amplification tests are the recommended diagnostic, however, these are both technically demanding and time consuming, making them unsuitable for resource-poor clinics. Consequently, there is a substantial need for an affordable, point-of-care diagnostic to use in these settings. In this study, DNA-functionalised gold nanoparticles (gold nanoprobes), with the ability to specifically detect the DNA Uptake Sequence (DUS) of Neisseria gonorrhoeae, were prepared. Using complementary annealing, the gold nanoprobes were shown to hybridise to genomic gonococcal DNA, causing a significant shift in their salt stability. By exploiting the shift in nanoprobe stability under the presence of target DNA, a solution-based colorimetric diagnostic for gonococcal DNA was prepared. Detection of purified genomic DNA was achieved in under 30 minutes, with a detection limit of 15.0 ng. Significantly, testing with DNA extracted from an off-target control organism suggested specificity for Neisseria. These results highlight the potential of DUS-specific gold nanoprobes in the rapid point-of-care diagnosis of gonococcal infections.

Small variations in reaction conditions tune carbon dot fluorescence.

The development of robust and reproducible synthetic strategies for the production of carbon dots (CDs) with improved fluorescence quantum yields and distinct emission profiles is of great relevance given the vast range of applications of CDs. The fundamental understanding at a molecular level of their formation mechanism, chemical structure and how these parameters are correlated to their photoluminescence (PL) properties is thus essential. In this study, we describe the synthesis and structural characterization of a range of CDs with distinct physico-chemical properties. The materials were prepared under three minutes of microwave irradiation using the same common starting materials (D-glucosamine hydrochloride 1 and ethylenediamine 2) but modifying the stoichiometry of the reagents. We show that small variation in reaction conditions leads to changes in the fluorescent behaviour of the CDs, especially in the selective enhancement of overlapped fluorescence bands. Structural analysis of the different CD samples suggested different reaction pathways during the CD formation and surface passivation, with the latter step being key to the observed differences. Moreover, we demonstrate that these materials have distinct reversible response to pH changes, which we can be attribute to different behaviour towards protonation/deprotonation events of distinct emission domains present within each nanomaterial. Our results highlight the importance of understanding the reaction pathways that lead to the formation of this carbon-based nanomaterials and how this can be exploited to develop tailored materials towards specific applications.

Quantitative and qualitative analysis of operator inhaled aerosols during routine motorised equine dental treatment.

BACKGROUND: Routine equine odontoplasty is performed by both Veterinary Surgeons and Equine Dental Technicians. The production of aerosolised particulates from motorised equipment has been well documented in human orthodontics but has yet to be investigated in the veterinary industry. OBJECTIVES: To assess the size, quantity and composition of particulates produced during routine motorised odontoplasty and to model their deposition in the human respiratory tree. STUDY DESIGN: Analytic observational study. METHODS: Fifteen-minute routine motorised odontoplasties were performed on cadaver heads with monitoring equipment placed 30 cm away from the oral cavity to simulate the position of the operator's face. For quantitative analysis, an active air sampling photometric monitor was used to detect the concentration of fully respirable (<4.25 µm) particles produced. The use of water and non-water-cooled equipment and 2 different types of face mask (standard surgical and FFP3) were compared. An 8-stage Marple Personal Cascade Impactor modelled the deposition of the particulates in relation to the human respiratory tree. Qualitative analysis of these particulates was performed using scanning electron microscopy and energy dispersive x-ray spectroscopy. RESULTS: Motorised odontoplasty created aerosolised particulates that could reach all levels of the human respiratory tree. These particulates were composed mostly of calcium and phosphate, although traces of metals were found. The concentration of fully respirable particulates exceeded the recommended exposure limits set by the Health and Safety Executive. The use of an FFP-3 face mask significantly reduced the level of inhaled particulates. MAIN LIMITATIONS: This was a simulated experiment. It does not take into account the variety of environments in which routine treatment takes place. CONCLUSIONS: There are possible health risks in performing a large amount of routine motorised dentistry due to inhalation of aerosolised particulates. The use of an adequate face mask lowers exposure levels to within acceptable limits and, therefore, should be worn.

Biopolymeric Coacervate Microvectors for the Delivery of Functional Proteins to Cells.

The extent to which biologic payloads can be effectively delivered to cells is a limiting factor in the development of new therapies. Limitations arise from the lack of pharmacokinetic stability of biologics in vivo. Encapsulating biologics in a protective delivery vector has the potential to improve delivery profile and enhance performance. Coacervate microdroplets are developed as cell-mimetic materials with established potential for the stabilization of biological molecules, such as proteins and nucleic acids. Here, the development of biodegradable coacervate microvectors (comprising synthetically modified amylose polymers) is presented, for the delivery of biologic payloads to cells. Amylose-based coacervate microdroplets are stable under physiological conditions (e.g., temperature and ionic strength), are noncytotoxic owing to their biopolymeric structure, spontaneously interacted with the cell membrane, and are able to deliver and release proteinaceous payloads beyond the plasma membrane. In particular, myoglobin, an oxygen storage and antioxidant protein, is successfully delivered into human mesenchymal stem cells (hMSCs) within 24 h. Furthermore, coacervate microvectors are implemented for the delivery of human bone morphogenetic protein 2 growth factor, inducing differentiation of hMSCs into osteoprogenitor cells. This study demonstrates the potential of coacervate microdroplets as delivery microvectors for biomedical research and the development of new therapies.

Identification of integrative and conjugative elements in pathogenic and commensal Neisseriaceae species via genomic distributions of DNA uptake sequence dialects.

Mobile genetic elements (MGEs) are key factors responsible for dissemination of virulence determinants and antimicrobial-resistance genes amongst pathogenic bacteria. Conjugative MGEs are notable for their high gene loads donated per transfer event, broad host ranges and phylogenetic ubiquity amongst prokaryotes, with the subclass of chromosomally inserted integrative and conjugative elements (ICEs) being particularly abundant. The focus on a small number of model systems has biased the study of ICEs towards those conferring readily selectable phenotypes to host cells, whereas the identification and characterization of integrated cryptic elements remains challenging. Even though antimicrobial resistance and horizontally acquired virulence genes are major factors aggravating neisserial infection, conjugative MGEs of Neisseria gonorrhoeae and Neisseria meningitidis remain poorly characterized. Using a phenotype-independent approach based on atypical distributions of DNA uptake sequences (DUSs) in MGEs relative to the chromosomal background, we have identified two groups of chromosomally integrated conjugative elements in Neisseria: one found almost exclusively in pathogenic species possibly deriving from the genus Kingella, the other belonging to a group of Neisseria mucosa-like commensals. The former element appears to enable transfer of traditionally gonococcal-specific loci such as the virulence-associated toxin-antitoxin system fitAB to N. meningitidis chromosomes, whilst the circular form of the latter possesses a unique attachment site (attP) sequence seemingly adapted to exploit DUS motifs as chromosomal integration sites. In addition to validating the use of DUS distributions in Neisseriaceae MGE identification, the >170 identified ICE sequences provide a valuable resource for future studies of ICE evolution and host adaptation.

Surface Patterning of Uniform 2D Platelet Block Comicelles via Coronal Chain Collapse.

The formation of colloids with anisotropically patterned surfaces is of growing interest for the creation of hierarchical structures and the templating of nanoparticles. We have recently shown that well-defined two-dimensional platelets with low areal dispersities can be formed by the seeded growth of a blend of homopolymers and block copolymers. Herein we form rectangular platelets containing two block copolymers with different coronal chemistries. On addition of a solvent that is only able to solvate the corona of one block, we were able to form colloidally stable micelles with patterned surfaces via coronal collapse. Scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy and atomic force microscopy were employed to provide information on the structure and size of the patches decorating the micelle surfaces.

Size-dependent melting point depression of nickel nanoparticles.

We investigate the phase-transition behaviour of nickel nanoparticles (3-6 nm) via dynamic TEM. The nanoparticles were synthesized within a reverse microemulsion and then monitored via dynamic TEM simultaneously while undergoing controlled heating. The size-dependent melting point depression experimentally observed is compared with, and is in good agreement with existing thermodynamic and molecular dynamic predictions.

Selective photothermal killing of cancer cells using LED-activated nucleus targeting fluorescent carbon dots.

The development of effective theranostic probes in cancer therapy is hampered due to issues with selectivity and off-target toxicity. We report the selective LED-photothermal ablation of cervical (HeLa) cancer cells over human dermal fibroblasts (HDF) using a new class of green-emissive fluorescent carbon dots (FCDs). The FCDs can be easily prepared in one pot using cheap and commercial starting materials. Physico-chemical characterization revealed that a surface coating of 2,5-deoxyfructosazine on a robust amorphous core gives rise to the nanomaterial's unique properties. We show that intracellular uptake mostly involves passive mechanisms in combination with intracellular DNA interactions to target the nucleus and that cancer cell selective killing is likely due to an increase in intracellular temperature in combination with ATP depletion, which is not observed upon exposure to either the "naked" core FCDs or the surface components individually. The selectivity of these nanoprobes and the lack of apparent production of toxic metabolic byproducts make these new nanomaterials promising agents in cancer therapy.

Practical Three-Minute Synthesis of Acid-Coated Fluorescent Carbon Dots with Tuneable Core Structure.

We report a one-pot, three-minute synthesis of carboxylic acid-decorated fluorescent carbon dots (COOH-FCDs) with tuneable core morphology dependent on the surface passivating agent. Mechanism investigations highlighted the presence of key pyrazine and polyhydroxyl aromatic motifs, which are formed from the degradation of glucosamine in the presence of a bifunctional linker bearing acid and amine groups. The novel COOH-FCDs are selective Fe3+ and hemin sensors. Furthermore, the FCDs are shown to be non-toxic, fluorescent bioimaging agents for cancer cells.

Surface functionalisation significantly changes the physical and electronic properties of carbon nano-dots.

Biomolecule functionalisation of carbon nano-dots (CDs) greatly enhances their biocompatibility and applicability, however, little is known about their molecular structure. Using an arsenal of spectroscopic and analytical techniques, we provide new insights into the physical and electronic structure of uncoated and glycan-functionalised CDs. Our studies reveal that surface functionalisation does not always result in a homogenous corona surrounding the core, and the choice of carbohydrate significantly affects the electronic structure of the surface CD states. Further, the average surface coverage of an ensemble of CDs can be probed via transient absorption spectroscopy. These findings have implications for CDs targeted at interactions with biological systems or local sensors.

Chloroplast-containing coacervate micro-droplets as a step towards photosynthetically active membrane-free protocells.

Encapsulation of structurally and functionally intact chloroplasts within coacervate micro-droplets is used to prepare membrane-free protocells capable of light-induced electron transport.

Zeolite Y supported nickel phosphide catalysts for the hydrodenitrogenation of quinoline as a proxy for crude bio-oils from hydrothermal liquefaction of microalgae.

This work demonstrates the potential of zeolite Y supported nickel phosphide materials as highly active catalysts for the upgrading of bio-oil as an improved alternative to noble metal and transition metal sulphide systems. Our systematic work studied the effect of using different counterions (NH4+, H+, K+ and Na+) and Si/Al ratios (2.56 and 15) of the zeolite Y. It demonstrates that whilst the zeolite counterion itself has little impact on the catalytic activity of the bare Y-zeolite, it has a strong influence on the activity of the resulting nickel phosphide catalysts. This effect is related to the nature of the nickel phases formed during the synthesis process Zeolites containing K+ and Na+ favour the formation of a mixed Ni12P5/Ni2P phase, H+ Y produces both Ni2P and metallic Ni, whereas NH4+ Y produces pure Ni2P, which can be attributed to the strength of the phosphorus-aluminium interaction and the metal reduction temperature. Using quinoline as a model for the nitrogen-containing compounds in bio-oils, it is shown that the hydrodenitrogenation activity increases in the order Ni2P > Ni0 > Ni12P5. While significant research has been dedicated to the development of bio-oils produced by thermal liquefaction of biomass, surprisingly little work has been conducted on the subsequent catalytic upgrading of these oils to reduce their heteroatom content and enable processing in conventional petrochemical refineries. This work provides important insights for the design and deployment of novel active transition metal catalysts to enable the incorporation of bio-oils into refineries.

Dimensional Control and Morphological Transformations of Supramolecular Polymeric Nanofibers Based on Cofacially-Stacked Planar Amphiphilic Platinum(II) Complexes.

Square-planar platinum(II) complexes often stack cofacially to yield supramolecular fiber-like structures with interesting photophysical properties. However, control over fiber dimensions and the resulting colloidal stability is limited. We report the self-assembly of amphiphilic Pt(II) complexes with solubilizing ancillary ligands based on polyethylene glycol [PEGn, where n = 16, 12, 7]. The complex with the longest solubilizing PEG ligand, Pt-PEG16, self-assembled to form polydisperse one-dimensional (1D) nanofibers (diameters <5 nm). Sonication led to short seeds which, on addition of further molecularly dissolved Pt-PEG16 complex, underwent elongation in a "living supramolecular polymerization" process to yield relatively uniform fibers of length up to ca. 400 nm. The fiber lengths were dependent on the Pt-PEG16 complex to seed mass ratio in a manner analogous to a living covalent polymerization of molecular monomers. Moreover, the fiber lengths were unchanged in solution after 1 week and were therefore "static" with respect to interfiber exchange processes on this time scale. In contrast, similarly formed near-uniform fibers of Pt-PEG12 exhibited dynamic behavior that led to broadening of the length distribution within 48 h. After aging for 4 weeks in solution, Pt-PEG12 fibers partially evolved into 2D platelets. Furthermore, self-assembly of Pt-PEG7 yielded only transient fibers which rapidly evolved into 2D platelets. On addition of further fiber-forming Pt complex (Pt-PEG16), the platelets formed assemblies via the growth of fibers selectively from their short edges. Our studies demonstrate that when interfiber dynamic exchange is suppressed, dimensional control and hierarchical structure formation are possible for supramolecular polymers through the use of kinetically controlled seeded growth methods.

Regulation of Scaffold Cell Adhesion Using Artificial Membrane Binding Proteins.

The rapid pace of development in biotechnology has placed great importance on controlling cell-material interactions. In practice, this involves attempting to decouple the contributions from adhesion molecules, cell membrane receptors, and scaffold surface chemistry and morphology, which is extremely challenging. Accordingly, a strategy is presented in which different chemical, biochemical, and morphological properties of 3D biomaterials are systematically varied to produce novel scaffolds with tuneable cell affinities. Specifically, cationized and surfactant-conjugated proteins, recently shown to have non-native membrane affinity, are covalently attached to 3D scaffolds of collagen or carboxymethyl-dextran, yielding surface-functionalized 3D architectures with predictable cell immobilization profiles. The artificial membrane-binding proteins enhance cellular adhesion of human mesenchymal stem cells (hMSCs) via electrostatic and hydrophobic binding mechanisms. Furthermore, functionalizing the 3D scaffolds with cationized or surfactant-conjugated myoglobin prevents a slowdown in proliferation of seeded hMSCs cultured for seven days under hypoxic conditions.

Three-minute synthesis of sp3 nanocrystalline carbon dots as non-toxic fluorescent platforms for intracellular delivery.

A one-pot, three-minute, gram-scale synthesis of novel sp3-nanocrystalline, water-soluble, and fluorescent carbon dots (FCDs), from simple and cheap sugar starting materials is described. Mechanism studies showed that NH2-FCD formation proceeds via a crucial imine intermediate derived from reaction between a sugar hemiacetal and an amine. Moreover, we successfully demonstrate the utility of lactose functionalized FCDots (Lac-FCDots) as non-toxic fluorescent intracellular delivery vehicles.

3D Bioprinting Using a Templated Porous Bioink.

3D tissue printing with adult stem cells is reported. A novel cell-containing multicomponent bioink is used in a two-step 3D printing process to engineer bone and cartilage architectures.