Jute fibre reinforced biodegradable composites using starch as a biological macromolecule: Fabrication and performance evaluation.

The aim of this study is to develop environment friendly packaging and life style materials for replacing conventionally explored hazardous synthetic materials. The study carried out by using raw jute fibre reinforced thermoplastic corn starch (TPCS) is to develop biodegradable flexible composite materials. Flexible composites are prepared by maintaining with different fibre content (30 %, 40 % and 50 wt%). A thin coating of polyurethane based formulation is applied on one side of the developed composite to make it water resistant. Composite samples are examined in terms of their tensile properties, tear resistance, folding endurance, water absorbency, capillary action etc. The results show that flexible composites, having 50 % fibre content have tensile strength of 12.8 MPa and 12 MPa at cross and machine direction respectively compared to 3.1 MPa for the TPCS film. The Water drop test on the coated side of the developed material concluded that there is no water penetration even after 60 min of wetting. The interaction between two hydrophilic components is established with FTIR analysis. The XRD analysis was carried out to find the crystallinity of TPCS, Jute fibre and composite samples. Surface morphology and fibre/matrix interaction is observed by SEM. The detail chemical mechanism involved of fibre matrix interaction also been postulated. The scientific finding shows that the developed flexible material can be suitable for making packaging and life style items.

Isolated lymph node recurrence in epithelial ovarian cancer - management and outcome.

INTRODUCTION: The aim of our study was to assess the clinical outcome of isolated lymph node recurrence in patients with epithelial ovarian cancer treated by surgery and to analyze the impact of various clinico-pathological factors on prognosis. MATERIAL AND METHODS: We conducted a retrospective analysis of all the epithelial ovarian cancer patients who underwent secondary lymphadenectomy surgery for isolated lymph node recurrence at our institute from 2013 to 2020. Univariate analysis of various factors influencing the post-recurrence disease free survival and post-recurrence survival was done using Kaplan-Meier for categorical variables and cox-proportional hazard progression for continuous variables. RESULTS: A total of 21 patients of isolated lymph node recurrence were treated surgically during the study period. The median disease free interval to develop lymph nodal recurrence was 13 months. All the patients achieved complete resection to no gross residual disease without any significant morbidity associated with the procedure. The median post-recurrence disease free survival after treatment of lymph node recurrence was 25 months with 3-year post-recurrence survival of 72% and 3-year overall survival of 85%. Amongst the factors influencing post-recurrence disease free survival, young age (< 50 years), para-aortic lymph node dissection at initial surgery and single site of lymph node recurrence were significantly associated with better prognosis. A single site of lymph node recurrence was associated with significantly better post-recurrence survival. CONCLUSIONS: Complete resection is feasible for epithelial ovarian cancer patients presenting with isolated lymph node recurrence, without any significant perioperative morbidity. When combined with postoperative adjuvant chemotherapy, complete resection is associated with favourable survival outcomes. Young age, para-aortic lymph node dissection during primary surgery and single site of lymph node recurrence are associated with better prognosis.

Psychological Assessment of Health-Care Workers Working during COVID-19 Pandemic Condition in Bangladesh.

The study was aimed to assess the psychological aspects and relevant factors of the health-care workers (HCWs) working in COVID 19 pandemic condition in Bangladesh. This online cross-sectional survey was conducted from different tertiary, secondary and primary hospitals in Bangladesh. Eligible 638 HCWs who were directly involved in the caring of confirmed or suspected COVID-19 patients were recruited in this study. The mental health was assessed by the Patient Health Questionnare-9 (PHQ-9), Generalized Anxiety Disorder-7 (GAD-7) and Athens Insomnia Scale (AIS). High frequency of depression 536(84.0%), anxiety 386(60.5%) and insomnia 302(47.3%) was found among the HCWs, which were significantly higher in physicians (p<0.001) than nurses. Moderate to severe depression was significantly higher in female, whereas minimal to mild depression was significant in male HCWs (p=0.014). Symptoms of depression (p<0.001), anxiety (p<0.001) and insomnia (p=0.004) were significantly higher among the HCWs of primary and secondary compared to the tertiary level. The HCWs developed psychological trauma due to family health (45.3%) and contagious disease property (66.6%). After adjusting confounders, multivariable logistic regression analysis showed that physicians and HCWs of secondary hospital had significant symptoms of severe depression (OR=2.95, 95% CI=0.50-17.24; p<0.001), anxiety (OR=2.64, 95% CI=0.80-8.72; p<0.001) and insomnia (OR=2.67, 95% CI=1.23-5.84; p=0.018); whereas female HCWs had more risk of developing symptoms of severe insomnia (OR= 1.84; 95% CI=1.23-2.75; p=0.003). High rate of depression, anxiety and insomnia was found among HCWs working in the COVID-19 pandemic condition in this survey.

Methods and variables in Electrical discharge machining of titanium alloy - A review.

Titanium alloys are difficult to machine using conventional methods, therefore, nonconventional processes are often chosen in many applications. Electrical discharge machining (EDM) is one of those nonconventional processes that is used frequently for shaping titanium alloys with their respective pros and cons. However, a good understanding of this process is very difficult to achieve as research results are not properly connected and presented. Therefore, this study investigates different types of EDM processes such as, wire EDM, die-sink EDM, EDM drill and hybrid EDM used to machine titanium alloys. Machining mechanism, tool electrode, dielectric, materials removal rate (MRR), and surface integrity of all these processes are critically analysed and correlated based on the evidence accessible in literature. Machining process suffer from lower material removal rate and high tool wear while applied on titanium alloys. Formation of recast layer, heat affected zone and tool wear is common in all types of EDM processes. Additional challenge in wire EDM of titanium alloys is wire breakage under severe machining conditions. The formation of TiC and TiO2 are noticed in recast layer depending on the type of dielectrics. Removal of debris from small holes during EDM drilling is a challenge. All these restricts the applications EDMed titanium alloys in high-tech applications such as, aerospace and biomedical areas. Most of these challenges come up due to extraordinary properties such as, low thermal conductivity, high melting point and high hardness, of titanium alloys. Though hybrid EDM has been introduced and there is some work on simulation of EDM process, further developments in EDM of this alloy is required for widening the application of this methods.

Benchmarking an 11-qubit quantum computer.

The field of quantum computing has grown from concept to demonstration devices over the past 20 years. Universal quantum computing offers efficiency in approaching problems of scientific and commercial interest, such as factoring large numbers, searching databases, simulating intractable models from quantum physics, and optimizing complex cost functions. Here, we present an 11-qubit fully-connected, programmable quantum computer in a trapped ion system composed of 13 171Yb+ ions. We demonstrate average single-qubit gate fidelities of 99.5[Formula: see text], average two-qubit-gate fidelities of 97.5[Formula: see text], and SPAM errors of 0.7[Formula: see text]. To illustrate the capabilities of this universal platform and provide a basis for comparison with similarly-sized devices, we compile the Bernstein-Vazirani and Hidden Shift algorithms into our native gates and execute them on the hardware with average success rates of 78[Formula: see text] and 35[Formula: see text], respectively. These algorithms serve as excellent benchmarks for any type of quantum hardware, and show that our system outperforms all other currently available hardware.

Observation of Hopping and Blockade of Bosons in a Trapped Ion Spin Chain.

The local phonon modes in a Coulomb crystal of trapped ions can represent a Hubbard system of coupled bosons. We selectively prepare single excitations at each site and observe free hopping of a boson between sites, mediated by the long-range Coulomb interaction between ions. We then implement phonon blockades on targeted sites by driving a Jaynes-Cummings interaction on individually addressed ions to couple their internal spin to the local phonon mode. The resulting dressed states have energy splittings that can be tuned to suppress phonon hopping into the site. This new experimental approach opens up the possibility of realizing large-scale Hubbard systems from the bottom up with tunable interactions at the single-site level.

Complete 3-Qubit Grover search on a programmable quantum computer.

The Grover quantum search algorithm is a hallmark application of a quantum computer with a well-known speedup over classical searches of an unsorted database. Here, we report results for a complete three-qubit Grover search algorithm using the scalable quantum computing technology of trapped atomic ions, with better-than-classical performance. Two methods of state marking are used for the oracles: a phase-flip method employed by other experimental demonstrations, and a Boolean method requiring an ancilla qubit that is directly equivalent to the state marking scheme required to perform a classical search. We also report the deterministic implementation of a Toffoli-4 gate, which is used along with Toffoli-3 gates to construct the algorithms; these gates have process fidelities of 70.5% and 89.6%, respectively.

Demonstration of a small programmable quantum computer with atomic qubits.

Quantum computers can solve certain problems more efficiently than any possible conventional computer. Small quantum algorithms have been demonstrated on multiple quantum computing platforms, many specifically tailored in hardware to implement a particular algorithm or execute a limited number of computational paths. Here we demonstrate a five-qubit trapped-ion quantum computer that can be programmed in software to implement arbitrary quantum algorithms by executing any sequence of universal quantum logic gates. We compile algorithms into a fully connected set of gate operations that are native to the hardware and have a mean fidelity of 98 per cent. Reconfiguring these gate sequences provides the flexibility to implement a variety of algorithms without altering the hardware. As examples, we implement the Deutsch-Jozsa and Bernstein-Vazirani algorithms with average success rates of 95 and 90 per cent, respectively. We also perform a coherent quantum Fourier transform on five trapped-ion qubits for phase estimation and period finding with average fidelities of 62 and 84 per cent, respectively. This small quantum computer can be scaled to larger numbers of qubits within a single register, and can be further expanded by connecting several such modules through ion shuttling or photonic quantum channels.

Respiratory Morbidity among Indian Tea Industry Workers.

BACKGROUND: Indian tea industry workers are exposed to various exposures at their workplace. OBJECTIVE: To investigate the respiratory health of Indian tea industry workers. METHODS: We administered a respiratory questionnaire to and measured lung function in workers of 34 tea gardens and 46 tea factories. We used correlation matrices to test the association between their respiratory symptoms and lung functions. RESULTS: The garden workers complained of shortness of breath 3 times higher than the factory workers. However, nasal allergy was more predominant among the factory workers compared to garden workers (69.6% vs 41.2%, p=0.02). The factory workers had higher total (median 107.3% vs 92.9%, p=0.05, as measured by R at 5 Hz) and peripheral airway resistance (143.8% vs 61.1%, p=0.005, as measured by R at 5-20 Hz) than the garden workers. Respiratory symptoms were inversely associated with airway obstruction as measured by the ratio between forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) and positively correlated with increased overall airway reactance among the workers. CONCLUSION: Respiratory symptoms and increased allergen susceptibility of Indian tea industry workers due to occupational exposures warrant routine systematic surveillance of their workplace air quality and health monitoring.

DNA damage-induced ephrin-B2 reverse signaling promotes chemoresistance and drives EMT in colorectal carcinoma harboring mutant p53.

Mutation in the TP53 gene positively correlates with increased incidence of chemoresistance in different cancers. In this study, we investigated the mechanism of chemoresistance and epithelial-to-mesenchymal transition (EMT) in colorectal cancer involving the gain-of-function (GOF) mutant p53/ephrin-B2 signaling axis. Bioinformatic analysis of the NCI-60 data set and subsequent hub prediction identified EFNB2 as a possible GOF mutant p53 target gene, responsible for chemoresistance. We show that the mutant p53-NF-Y complex transcriptionally upregulates EFNB2 expression in response to DNA damage. Moreover, the acetylated form of mutant p53 protein is recruited on the EFNB2 promoter and positively regulates its expression in conjunction with coactivator p300. In vitro cell line and in vivo nude mice data show that EFNB2 silencing restores chemosensitivity in mutant p53-harboring tumors. In addition, we observed high expression of EFNB2 in patients having neoadjuvant non-responder colorectal carcinoma compared with those having responder version of the disease. In the course of deciphering the drug resistance mechanism, we also show that ephrin-B2 reverse signaling induces ABCG2 expression after drug treatment that involves JNK-c-Jun signaling in mutant p53 cells. Moreover, 5-fluorouracil-induced ephrin-B2 reverse signaling promotes tumorigenesis through the Src-ERK pathway, and drives EMT via the Src-FAK pathway. We thus conclude that targeting ephrin-B2 might enhance the therapeutic potential of DNA-damaging chemotherapeutic agents in mutant p53-bearing human tumors.

Sialolithiasis of an accessory parotid gland: an unusual case.

We report a rare case of sialolithiasis of an accessory parotid gland, which was located anteromedial to the masseter muscle and isolated from the main parotid gland. The calculus developed from this accessory gland, and the main gland was free of lithiasis and inflammation. To our knowledge, there is no reported case of 14 stones in an accessory parotid salivary gland. The calculus was removed through a standard incision without injury to the facial nerve or a salivary fistula.

Disruption of the 5S RNP-Mdm2 interaction significantly improves the erythroid defect in a mouse model for Diamond-Blackfan anemia.

Diamond-Blackfan anemia (DBA) is a congenital erythroid hypoplasia caused by haploinsufficiency of genes encoding ribosomal proteins (RPs). Perturbed ribosome biogenesis in DBA has been shown to induce a p53-mediated ribosomal stress response. However, the mechanisms of p53 activation and its relevance for the erythroid defect remain elusive. Previous studies have indicated that activation of p53 is caused by the inhibition of mouse double minute 2 (Mdm2), the main negative regulator of p53, by the 5S ribonucleoprotein particle (RNP). Meanwhile, it is not clear whether this mechanism solely mediates the p53-dependent component found in DBA. To approach this question, we crossed our mouse model for RPS19-deficient DBA with Mdm2(C305F) knock-in mice that have a disrupted 5S RNP-Mdm2 interaction. Upon induction of the Rps19 deficiency, Mdm2(C305F) reversed the p53 response and improved expansion of hematopoietic progenitors in vitro, and ameliorated the anemia in vivo. Unexpectedly, disruption of the 5S RNP-Mdm2 interaction also led to selective defect in erythropoiesis. Our findings highlight the sensitivity of erythroid progenitor cells to aberrations in p53 homeostasis mediated by the 5S RNP-Mdm2 interaction. Finally, we provide evidence indicating that physiological activation of the 5S RNP-Mdm2-p53 pathway may contribute to functional decline of the hematopoietic system in a cell-autonomous manner over time.

The antiacetylcholinesterase and antileishmanial activities of Canarium patentinervium Miq.

In continuation of our natural and medicinal research programme on tropical rainforest plants, a bioassay guided fractionation of ethanolic extract of leaves of Canarium patentinervium Miq. (Burseraceae Kunth.) led to the isolation of scopoletin (1), scoparone (2), (+)-catechin (3), vomifoliol (4), lioxin (5), and syringic acid (6). All the compounds exhibited antiacetylcholinesterase activity with syringic acid, a phenolic acid exhibiting good AChE inhibition (IC50 29.53 ± 0.19 µ g/mL). All compounds displayed moderate antileishmanial activity with scopoletin having the highest antileishmanial activity (IC50 163.30 ± 0.32 µ g/mL). Given the aforementioned evidence, it is tempting to speculate that Canarium patentinervium Miq. represents an exciting scaffold from which to develop leads for treatment of neurodegenerative and parasitic diseases.

Optimal quantum control of multimode couplings between trapped ion qubits for scalable entanglement.

We demonstrate entangling quantum gates within a chain of five trapped ion qubits by optimally shaping optical fields that couple to multiple collective modes of motion. We individually address qubits with segmented optical pulses to construct multipartite entangled states in a programmable way. This approach enables high-fidelity gates that can be scaled to larger qubit registers for quantum computation and simulation.

Beat note stabilization of mode-locked lasers for quantum information processing.

We stabilize a chosen radio frequency beat note between two optical fields derived from the same mode-locked laser pulse train in order to coherently manipulate quantum information. This scheme does not require access or active stabilization of the laser repetition rate. We implement and characterize this external lock, in the context of two-photon stimulated Raman transitions between the hyperfine ground states of trapped 171Yb(+) quantum bits.

Quality characteristics and stability of Moringa oleifera seed oil of Indian origin.

Cold pressed and hexane extracted moringa seed oils (CPMSO and HEMSO) were evaluated for their physico-chemical and stability characteristics. The iodine value, saponification value and unsaponifiable matter of CPMSO and HEMSO were found to be 67.8 and 68.5 g I2 / 100 g oil, 190.4 and 191.2 mg KOH / g oil and 0.59 and 0.65%, respectively. The total tocopherols of CPMSO and HEMSO were found to be 95.5 and 90.2 mg/Kg. The fatty acid composition of CPMSO and HEMSO showed oleic acid as the major fatty acid (78-79%). The oxidative, thermal and frying stabilities of the CPMSO were compared with commercial raw and refined groundnut oil (GNO and RGNO). The CPMSO was of adequate thermal stability and better oxidative stability as it showed 79% lesser peroxide formation than GNO. The frying stability of CPMSO was better as it showed lower increase in free fatty acid (28%), peroxide value (10 meq O2/Kg) and color (25%) than RGNO (48%, 22 meq O2/kg and 52%, respectively) after frying.

Coherent error suppression in multiqubit entangling gates.

We demonstrate a simple pulse shaping technique designed to improve the fidelity of spin-dependent force operations commonly used to implement entangling gates in trapped ion systems. This extension of the Mølmer-Sørensen gate can theoretically suppress the effects of certain frequency and timing errors to any desired order and is demonstrated through Walsh modulation of a two qubit entangling gate on trapped atomic ions. The technique is applicable to any system of qubits coupled through collective harmonic oscillator modes.

Tripartite entanglement versus tripartite nonlocality in three-qubit Greenberger-Horne-Zeilinger-class states.

We analyze the relationship between tripartite entanglement and genuine tripartite nonlocality for three-qubit pure states in the Greenberger-Horne-Zeilinger class. We consider a family of states known as the generalized Greenberger-Horne-Zeilinger states and derive an analytical expression relating the three-tangle, which quantifies tripartite entanglement, to the Svetlichny inequality, which is a Bell-type inequality that is violated only when all three qubits are nonlocally correlated. We show that states with three-tangle less than 1/2 do not violate the Svetlichny inequality. On the other hand, a set of states known as the maximal slice states does violate the Svetlichny inequality, and exactly analogous to the two-qubit case, the amount of violation is directly related to the degree of tripartite entanglement. We discuss further interesting properties of the generalized Greenberger-Horne-Zeilinger and maximal slice states.

Interface effects on mechanical properties of particle-reinforced composites.

OBJECTIVES: Effective bonding between the filler and matrix components typically improves the mechanical properties of polymer composites containing inorganic fillers. The aim of this study was to test the hypothesis that composite flexural modulus, flexure strength, and toughness are directly proportional to filler-matrix interfacial shear strength. METHODS: The resin matrix component of the experimental composite consisted of a 60:40 blend of BisGMA:TEGDMA. Two levels of photoinitiator components were used: 0.15, and 0.5%. Raman spectroscopy was used to determine degree of cure, and thermogravimetry (TGA) was used to quantify the degree of silane, rubber, or polymer attachment to silica and glass particles. Filler-matrix interfacial shear strengths were measured using a microbond test. Composites containing glass particles with various surface treatments were prepared and the modulus, flexure strength, and fracture toughness of these materials obtained using standard methods. Mechanical properties were measured on dry and soaked specimens. RESULTS: The interfacial strength was greatest for the 5% MPS treated silica, and it increased for polymers prepared with 0.5% initiator compared with 0.15% initiator concentrations. For the mechanical properties measured, the authors found that: (1) the flexural modulus was independent of the type of filler surface treatment, though flexural strength and toughness were highest for the silanated glass; (2) rubber at the interface, whether bonded to the filler and matrix or not, did not improve toughness; (3) less grafting of resin to silanated filler particles was observed when the initiator concentration decreased. SIGNIFICANCE: These findings suggest that increasing the strength of the bond between filler and matrix will not result in improvements in the mechanical properties of particulate-reinforced composites in contrast to fiber-reinforced composites. Also, contraction stresses in the 0.5 vs 0.15% initiator concentration composites may be responsible for increases in interfacial shear strengths, moduli, and flexural strengths.