RESUMO
OBJECTIVE: Considering that misfit is a significant predictor of the clinical success of indirect restorations, the objective of this study was to evaluate the marginal and internal misfit of two computer-aided design and manufacturing (CAD/CAM) RMC ceramic materials used as occlusal veneers (OVs) of different thicknesses. METHODS AND MATERIALS: A CAD model of a mandibular first molar was obtained and OV preparations 0.5-, 1.0-, and 1.5-mm thick were modeled and milled in two different materials (n=10/group): resin nanoceramic (RNC) and polymer-infiltrated ceramic network (PICN). Using the same CAD model, tooth preparations were milled in fiber-reinforced epoxy resin (n=20/thickness). The marginal and internal misfit of the restorations was assessed by X-ray microtomography. The measurements of the marginal gap (MG) and absolute marginal discrepancy were performed in two locations on each slice, whereas internal gap (IG) measurements were performed at ten locations on each slice. The data obtained were analyzed using two-way analysis of variance and Tukey post-hoc tests (α=0.05). RESULTS: No significant effect was attributable to the material type or material-thickness interaction for the MG, absolute marginal discrepancy (AMD), or IG (p>0.05). However, the thickness significantly affected the IG of the restorations (p<0.05). CAD/CAM RNC and PICN systems presented similar MG and AMD for OVs 0.5-, 1.0-, and 1.5-mm thick. However, the IG varied between thicknesses.
Assuntos
Cerâmica , Desenho Assistido por Computador , Microtomografia por Raio-X , Dente MolarRESUMO
Botulinum toxins (BoNTs) are a product of the bacteria Clostridium botulinum. By entering nerve endings, they cleave and inactivate SNARE proteins, which are essential for neurotransmitter release. Prevention of acetylcholine release at the neuromuscular junction causes long-lasting and potentially fatal flaccid paralysis-a major feature of botulism. However, an intramuscular injection of minute amounts of BoNTs, primarily type A (BoNT-A), has useful long-lasting muscle relaxation effects on spastic motor disorders. This characteristic of BoNT-A is widely used in neurology and cosmetics. Over the last few decades, it has been demonstrated that the functions of BoNT-A are not limited to muscle-relaxing or autonomic cholinergic effects but that it can act as an analgesic agent as well. More recently, it was revealed that this antinociceptive effect starts after entering the sensory nerve endings, where these agents are axonally transported to the central nervous system, suggesting that at least part of their analgesic effect might be of central origin. Because of its antinociceptive effect, BoNT-A is currently approved for treatment of chronic migraine; nonetheless, case reports and preclinical and clinical experiments indicating its benefit in numerous potential painful conditions have increased. In the field of dentistry, the US Food and Drug Administration approved BoNT-A for the treatment of sialorrhea only. Legal status of the use of BoNT-A in other countries is less known. However, there are controlled clinical trials suggesting its efficacy in other conditions, such as bruxism, temporomandibular disorders, and trigeminal neuropathic pain. Thereby, using criteria of the American Academy of Neurology, we critically reviewed the uses of BoNTs in oral medicine and found it effective for trigeminal neuralgia (category A) and probably effective in temporomandibular disorders and bruxism.
Assuntos
Analgésicos/uso terapêutico , Toxinas Botulínicas Tipo A/uso terapêutico , Neuralgia do Trigêmeo/tratamento farmacológico , Bruxismo/tratamento farmacológico , Ensaios Clínicos Controlados como Assunto , Humanos , Medicina Bucal , Transtornos da Articulação Temporomandibular/tratamento farmacológicoRESUMO
This study reviews the clinical and radiographic outcomes of Mini-implants (MI) and Narrow Diameter Implants (NDI) as mandibular overdenture (MO) retainers. Six databases were consulted for clinical studies that evaluated implants with diameter ≤3.5 mm. Data on the MI and NDI for survival and success rate and peri-implant bone loss and were collected and submitted to meta-analysis. Thirty-six studies were included, 24 reporting MI performance and 12 describing NDI results. The MI group comprised data from 1 cross-sectional clinical study, 3 retrospective longitudinal (RL) clinical studies, 13 prospective longitudinal (PL) clinical studies and 7 randomised clinical trials (RCT) with follow-up periods ranging from 1 day to 7 years. Eight studies used conventional loading, thirteen used immediate loading, two studies used both loading types, and one study did not report. The NDI group comprised data from 3 RL clinical studies, 6 PL clinical studies and 3 RCT with follow-up ranging from 6 months to 10 years. Ten studies used conventional loading, 1 study used immediate loading, and 1 study did not report. The average survival rates of MI and NDI studies were 98% and 98%, respectively, while the average success rates were 93% and 96%, respectively. The average peri-implant bone loss after 12, 24 and 36 months was 0.89, 1.18 and 1.02 mm for MI and 0.18, 0.12 and -0.32 mm for NDI. Both MI and NDI showed adequate clinical behaviour as overdenture retainers. The NDI showed a better long-term predictability to retain OM with most studies adopting conventional loading.
Assuntos
Prótese Dentária Fixada por Implante/instrumentação , Falha de Restauração Dentária/estatística & dados numéricos , Revestimento de Dentadura , Arcada Edêntula/cirurgia , Mandíbula/diagnóstico por imagem , Radiografia , Perda do Osso Alveolar/diagnóstico por imagem , Estudos Transversais , Planejamento de Prótese Dentária , Humanos , Arcada Edêntula/diagnóstico por imagem , Mandíbula/cirurgia , Resultado do TratamentoRESUMO
This longitudinal clinical study investigated the differences in the masticatory function (MF), satisfaction and oral health-related quality of life (OHRQoL) between atrophic patients (AP) and non-atrophic patients (NAP) before and after rehabilitation with mandibular overdenture (MO). Twenty-six complete denture (CD) wearers were categorised into two groups, according to the mandibular bone atrophy (MBA) degree. MF was evaluated before and after 1, 3, 6 and 12 months of the MO loading via 2 standardised tests: (i) MP, masticatory performance (MP_X50, MPB, ME 5·6, ME 2·8) and (ii) ST, swallowing threshold (time, number of cycles, ST_X50, STB, ME 5·6, ME 2·8). The dental impact on daily living (DIDL) questionnaire measured changes in the satisfaction level and OHRQoL. MP comparisons showed significant difference only for ME 5·6 12 months after MO loading (AP=33·79 ± 23·6; NAP=17·58 ± 20·1). ST presented significant differences before MO loading for: ST_X50 (AP=5·48 ± 0·83; NAP=4·31 ± 1·44), ME 5·6 (AP=53·17 ± 24·71; NAP=29·83 ± 31·45) and ME 2·8 (AP=8·76 ± 6·91; NAP=18·61 ± 10·71). One month after MO loading, NAP performed the ST test 21% faster than AP. After 3 months, significant improvements in STB (AP=4·93 ± 4·82; NAP=2·73 ± 1·27) and ME 2·8 (AP=17·15 ± 10·00; NAP=24·69 ± 7·82) also were observed. DIDL evaluation showed significant differences in the oral comfort domain after 3 months (AP=0·66 ± 0·29; NAP=0·87 ± 0·16) and after 6 months (AP=0·79 ± 0·22; NAP=0·98 ± 0·08), with lower satisfaction levels in the AP. MBA negatively affects the MF mainly the ST. After 6 months, differences between AP and NAP disappeared and ST results were equalised. AP initially has lower satisfaction levels reaching similar levels of satisfaction as NAP after 1 year.
Assuntos
Atrofia/fisiopatologia , Revestimento de Dentadura , Doenças Mandibulares/fisiopatologia , Mastigação/fisiologia , Idoso , Atrofia/complicações , Prótese Total , Feminino , Humanos , Estudos Longitudinais , Masculino , Doenças Mandibulares/complicações , Educação de Pacientes como Assunto , Satisfação do Paciente/estatística & dados numéricos , Qualidade de Vida , Resultado do TratamentoRESUMO
OBJECTIVES: The aim of this study was to investigate the restoration of broken-down endodontically treated incisors with the ferrule effect using glass ceramic crowns bonded to composite resin core buildups with or without a fiber post. A no-ferrule group with post was also included for comparison. METHODS AND MATERIALS: Thirty decoronated endodontically treated bovine incisors with a 2-mm ferrule were restored with a direct buildup using a nanohybrid direct composite resin (Miris 2 and Optibond FL) with or without a glass-fiber-reinforced post. An additional group of 15 teeth without a ferrule were restored with buildup and a fiber post. All teeth were prepared to receive bonded glass ceramic crowns (e.max CAD luted with Variolink Esthetic DC) and were subjected to accelerated fatigue testing. Cyclic isometric loading was applied to the incisal edge at an angle of 30° and a frequency of 5 Hz, beginning with a load of 100 N (×5000 cycles). A 100 N load increase was applied each 15,000 cycles. Specimens were loaded until failure or to a maximum of 1000 N (×140,000 cycles). Groups were compared using the Kaplan Meier survival analysis (log rank test at p=0.05). RESULTS: None of the tested specimens withstood all 140,000 load cycles. Specimens with posts but without a ferrule were affected by an initial failure phenomenon (wide gap at the lingual margin between the buildup/crown assembly and the root). There was a significant difference in mean survived cycles between the ferrule groups (Fp=73,332× and FNp=73,244×) and the no-ferrule group (50,121×; p=0.001). The addition of a fiber post was not significant in the presence of the ferrule (p=0.884). In both groups with posts, 100% of failures were unrestorable. The no-post group had 47% of restorable and possibly restorable failures. CONCLUSIONS: The survival of broken-down nonvital incisors was improved by the presence of the ferrule but not by the fiber-reinforced post. Fiber posts were always detrimental to the failure mode and were not able to compensate for the absence of a ferrule.
Assuntos
Resinas Compostas/química , Porcelana Dentária/química , Restauração Dentária Permanente/métodos , Técnica para Retentor Intrarradicular , Cimentos de Resina/química , Dente não Vital/terapia , Animais , Bovinos , Coroas , Planejamento de Prótese Dentária , Falha de Restauração Dentária , Análise do Estresse Dentário , Técnicas In Vitro , IncisivoRESUMO
The fungus Candida albicans is carried orally and causes a range of superficial infections that may become systemic. Oral bacteria Actinomyces oris and Streptococcus oralis are abundant in early dental plaque and on oral mucosa. The aims of this study were to determine the mechanisms by which S. oralis and A. oris interact with each other and with C. albicans in biofilm development. Spatial distribution of microorganisms was visualized by confocal laser scanning microscopy of biofilms labeled by differential fluorescence or by fluorescence in situ hybridization (FISH). Actinomyces oris and S. oralis formed robust dual-species biofilms, or three-species biofilms with C. albicans. The bacterial components tended to dominate the lower levels of the biofilms while C. albicans occupied the upper levels. Non-fimbriated A. oris was compromised in biofilm formation in the absence or presence of streptococci, but was incorporated into upper biofilm layers through binding to C. albicans. Biofilm growth and hyphal filament production by C. albicans was enhanced by S. oralis. It is suggested that the interkingdom biofilms are metabolically coordinated to house all three components, and this study demonstrates that adhesive interactions between them determine spatial distribution and biofilm architecture. The physical and chemical communication processes occurring in these communities potentially augment C. albicans persistence at multiple oral cavity sites.
Assuntos
Actinomyces/fisiologia , Biofilmes/crescimento & desenvolvimento , Candida albicans/fisiologia , Película Dentária/microbiologia , Streptococcus oralis/fisiologia , Actinomyces/crescimento & desenvolvimento , Actinomyces/metabolismo , Aderência Bacteriana , Biofilmes/classificação , Candida albicans/crescimento & desenvolvimento , Candida albicans/metabolismo , Película Dentária/diagnóstico por imagem , Placa Dentária/microbiologia , Humanos , Hibridização in Situ Fluorescente/métodos , Interações Microbianas , Microscopia Confocal , Boca/microbiologia , Mucosa Bucal/microbiologia , Streptococcus oralis/crescimento & desenvolvimento , Streptococcus oralis/metabolismoRESUMO
Alendronate therapy has been associated with serious side effects. Altering the alendronate concentration and combining with high-frequency loading as mechanical intervention was explored in this animal study as a treatment for osteoporosis. The bone anabolic potency of high-frequency loading was overruled by the different alendronate dosages applied in the present study. Further exploration of reduced hormonal therapy associated with mechanical interventions in osteoporosis treatment should be sought. INTRODUCTION: The aim of the present study was to investigate the effect of alendronate (ALN) administration at two different dosages, associated or not with high-frequency (HF) loading, on the bone microstructural response. METHODS: Sixty-four female Wistar rats were used, of which 48 were ovariectomized (OVX) and 16 were sham-operated (shOVX). The OVX animals were divided into three groups: two groups were treated with alendronate, at a dosage of 2 mg/kg (ALN(2)) or at a reduced dosage of 1 mg/kg (ALN(1)) three times per week. A third OVX group did not receive pharmaceutical treatment. All four groups were mechanically stimulated via whole body vibration (WBV) at HF (up to 150 Hz) or left untreated (shWBV). ALN and HF were administered for 6 weeks, starting at 10-week post-(sh)OVX. Tibia bone structural parameters were analyzed using ex vivo microcomputed tomography. RESULTS: Trabecular bone loss and structural deterioration resulting from ovariectomy were partially restored by ALN administration, demonstrated by the improvement of trabecular patter factor (Tb.Pf), trabecular separation (Tb.Sp), and structure model index (SMI) of the ALN groups compared to that of the OVX group, regardless of the applied dosage [ALN(2) or ALN(1)] or mechanical loading regime (shWBV or WBV). However, a significant positive effect of the ALN(1) administration on trabecular (decrease of Tb.Sp and SMI) and cortical bone (increase of cortical thickness) microarchitecture compared to that of the OVX status group was observed for both loading regimes was not seen for ALN(2). Furthermore, HF loading resulted in cortical bone changes, with an increased trabeculary area and endocortical perimeter. Finally, the benefits of a combined therapy of ALN with HF loading could not be discerned in the present experimental conditions. CONCLUSIONS: The bone anabolic potency of HF loading was overruled by the ALN dosages applied in the present study. Further altering the ALN dosage combined with robust mechanical stimuli needs to be considered in osteoporosis research and eventually therapy.
Assuntos
Alendronato/administração & dosagem , Conservadores da Densidade Óssea/administração & dosagem , Osteoporose/terapia , Vibração/uso terapêutico , Alendronato/uso terapêutico , Animais , Densidade Óssea/fisiologia , Conservadores da Densidade Óssea/uso terapêutico , Terapia Combinada , Relação Dose-Resposta a Droga , Feminino , Osteoporose/tratamento farmacológico , Osteoporose/fisiopatologia , Ovariectomia , Ratos Wistar , Tíbia/fisiopatologia , Suporte de Carga/fisiologia , Microtomografia por Raio-X/métodosRESUMO
Monolithic zirconia crowns have many favorable properties and may potentially be used to solve dental problems such as chipping. However, monolithic zirconia crown resistance can be affected by its phase transformation when subjected to low temperatures, humidity, and stress. This study evaluated the fracture load and phase transformation of monolithic zirconia crowns submitted to different thermal and mechanical aging tests. Seventy monolithic zirconia crowns were randomly divided into the following five groups: control, no treatment; hydrothermal aging at 122°C, two bar for one hour; thermal fatigue, 104 cycles between 5°C and 55°C, dwell time, 30 seconds; and mechanical fatigue, 106 cycles with a load of 70 N, sliding of 1.5 mm at 1.4 Hz; and combination of mechanical plus thermal fatigue. Fracture load was measured with a universal testing machine. Surface changes and fracture mode and origin were examined with a scanning electron microscope. Monoclinic phase content was evaluated by x-ray diffraction. The fracture load was analyzed using one-way analysis of variance at a level of 5%, and Weibull distribution was performed. No statistically significant differences were observed in the mean fracture load and characteristic fracture load among the groups (p>0.05). The Weibull modulus ranged from 6.2 to 16.6. The failure mode was similar for all groups with the crack origin located at the contact point of the indenter. Phase transformation was shown at different surfaces of the crown in all groups (1.9% to 8.9%). In conclusion, monolithic zirconia crowns possess high fracture load, structural reliability, and low phase transformation.
RESUMO
Osteoporosis leads to increased bone fragility, thus effective approaches enhancing bone strength are needed. Hence, this study investigated the effect of single or combined application of high-frequency (HF) loading through whole body vibration (WBV) and alendronate (ALN) on the mechanical competence of ovariectomy-induced osteoporotic bone. Thirty-four female Wistar rats were ovariectomized (OVX) or sham-operated (shOVX) and divided into five groups: shOVX, OVX-shWBV, OVX-WBV, ALN-shWBV and ALN-WBV. (Sham)WBV loading was applied for 10 min/day (130 to 150 Hz at 0.3g) for 14 days and ALN at 2 mg/kg/dose was administered 3x/week. Finite element analysis based on micro-CT was employed to assess bone biomechanical properties, relative to bone micro-structural parameters. HF loading application to OVX resulted in an enlarged cortex, but it was not able to improve the biomechanical properties. ALN prevented trabecular bone deterioration and increased bone stiffness and bone strength of OVX bone. Finally, the combination of ALN with HF resulted in an increased cortical thickness in OVX rats when compared to single treatments. Compared to HF loading, ALN treatment is preferred for improving the compromised mechanical competence of OVX bone. In addition, the association of ALN with HF loading results in an additive effect on the cortical thickness.
Assuntos
Conservadores da Densidade Óssea/farmacologia , Osso e Ossos/efeitos dos fármacos , Difosfonatos/farmacologia , Fenômenos Mecânicos , Osteoporose/tratamento farmacológico , Osteoporose/etiologia , Ovariectomia/efeitos adversos , Análise de Variância , Animais , Conservadores da Densidade Óssea/administração & dosagem , Osso e Ossos/diagnóstico por imagem , Difosfonatos/administração & dosagem , Modelos Animais de Doenças , Feminino , Osteoporose/diagnóstico por imagem , Ratos , Vibração , Suporte de Carga , Microtomografia por Raio-XRESUMO
Candida albicans and streptococci of the mitis group form communities in multiple oral sites, where moisture and nutrient availability can change spatially or temporally. This study evaluated structural and virulence characteristics of Candida-streptococcal biofilms formed on moist or semidry mucosal surfaces, and tested the effects of nutrient availability and hyphal morphotype on dual-species biofilms. Three-dimensional models of the oral mucosa formed by immortalized keratinocytes on a fibroblast-embedded collagenous matrix were used. Infections were carried out using Streptococcus oralis strain 34, in combination with a C. albicans wild-type strain, or pseudohyphal-forming mutant strains. Increased moisture promoted a homogeneous surface biofilm by C. albicans. Dual biofilms had a stratified structure, with streptococci growing in close contact with the mucosa and fungi growing on the bacterial surface. Under semidry conditions, Candida formed localized foci of dense growth, which promoted focal growth of streptococci in mixed biofilms. Candida biofilm biovolume was greater under moist conditions, albeit with minimal tissue invasion, compared with semidry conditions. Supplementing the infection medium with nutrients under semidry conditions intensified growth, biofilm biovolume and tissue invasion/damage, without changing biofilm structure. Under these conditions, the pseudohyphal mutants and S. oralis formed defective superficial biofilms, with most bacteria in contact with the epithelial surface, below a pseudohyphal mass, resembling biofilms growing in a moist environment. The presence of S. oralis promoted fungal invasion and tissue damage under all conditions. We conclude that moisture, nutrient availability, hyphal morphotype and the presence of commensal bacteria influence the architecture and virulence characteristics of mucosal fungal biofilms.
Assuntos
Biofilmes , Candida albicans/fisiologia , Mucosa Bucal/microbiologia , Streptococcus oralis/fisiologia , Biofilmes/classificação , Biofilmes/crescimento & desenvolvimento , Candida , Candida albicans/crescimento & desenvolvimento , Candida albicans/patogenicidade , Meios de Cultura , Hifas/classificação , Hifas/crescimento & desenvolvimento , Mucosa Bucal/ultraestrutura , Mutação , Streptococcus oralis/crescimento & desenvolvimento , Streptococcus oralis/patogenicidade , Simbiose , VirulênciaRESUMO
OBJECTIVE: The aim of this study was to evaluate the composition of the salivary pellicle (SP) and multispecies biofilm developed on titanium nitrided by cold plasma. METHODS: Titanium discs were allocated into a control group (Ti) and an experimental group (TiN - titanium-nitrided by cold plasma). The disc surface topography was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The chemical composition of the disc surface was determined by X-ray photoelectron spectroscopy (XPS). Stimulated, clarified, and filtered saliva was used to form pellicles on the discs. Proteome analysis of the adsorbed SP proteins was performed by liquid chromatography-mass spectrometry (LC-MS). The surface free energy (SFE) was evaluated before and after SP formation. A multispecies biofilm composed of Actinomyces naeslundii, Streptococcus oralis, Streptococcus mutans, Fusobacterium nucleatum, Veillonella dispar, and Candida albicans was developed on the SP-coated discs. Viable microorganism counts were determined. The biomass and average thickness of biofilms were analyzed by confocal laser-scanning microscopy (CLSM) with COMSTAT software. The biofilm organization was visualized by SEM. RESULTS: The surface topography was similar in both groups. The SFE of the TiN group did not differ from that of the Ti group (p>0.05), although the adsorption of pellicle proteins increased the SFE in both pellicle-coated groups (p<0.001). Different proteins were identified on the Ti and TiN surfaces. The amount of biofilm was similar for both groups (p=0.416), but the counts of F. nucleatum and S. oralis were higher in the TiN group (p<0.001). Similar biofilms were characterized by the COMSTAT data, CLSM images, and SEM images. CONCLUSION: The titanium nitrided by cold plasma exhibited differences in SP composition and multispecies microbial biofilm population compared to the control titanium surface.
Assuntos
Biofilmes , Película Dentária/química , Película Dentária/microbiologia , Titânio/química , Microscopia de Força Atômica , Microscopia Confocal , Microscopia Eletrônica de Varredura , Espectroscopia Fotoeletrônica , Gases em Plasma , Proteínas e Peptídeos Salivares/química , Software , Propriedades de SuperfícieRESUMO
The limited number of treatments for oral candidiasis resulted in the emergence of azole-resistant Candida albicans strains, thus enforcing the need for novel antifungal treatments. Although histatin 5 (H5) demonstrates antifungal activity, its inhibitory effect when adhered to hydroxyapatite and Polymetylmethacrylate (PMMA) surfaces, resembling conditions of the in vivo pellicle, remains unexplored. The objective of this in vitro study was to determine whether surface-adhered H5 inhibits the colonization of C. albicans on hydroxyapatite and/or PMMA. The C. albicans assay involved developing a mono-protein pellicle (either H5 or albumin) on hydroxyapatite and PMMA discs, introducing C. albicans and counting the number of adhered cells, throughout time, using scanning electron microscopy. A negative binomial statistical model and the Tukey-Kramer test were used for statistical analysis, with p < 0.01 indicating significance. H5-coated PMMA had significantly reduced number of cells compared to albumin-coated PMMA at 30, 90 and 1440 min (p < 0.0001), with the number of cells decreasing significantly in 90 and 1440 min (p < 0.0001). Similarly, H5-coated hydroxyapatite had significantly fewer cells compared to the albumin-coated surface at 90 and 1440 min (p < 0.0001), with the number of cells decreasing significantly at 30, 90 and 1440 min (p < 0.0001). In conclusion, C. albicans colonization was most inhibited by PMMA and hydroxyapatite-adhered H5 after 1440 min, illustrating the time-dependent effect of H5. In addition, yeast cells colonized albumin-coated PMMA, while dense hyphal networks formed on albumin-coated hydroxyapatite, suggesting that C. albicans morphology is influenced by the surface available for albumin adhesion.
Assuntos
Antifúngicos/metabolismo , Candida albicans/fisiologia , Adesão Celular/efeitos dos fármacos , Durapatita/química , Microbiologia Ambiental , Histatinas/metabolismo , Polimetil Metacrilato/química , Candida albicans/crescimento & desenvolvimento , Contagem de Colônia Microbiana , Humanos , Microscopia Eletrônica de Varredura , Fatores de TempoRESUMO
Denture liners (DL) are easily colonized by Candida spp. In an attempt to prevent biofilm colonization, manufacturers have incorporated undecylenic acid (UDA) into DL. In this in vitro study, the effects of UDA released from DL on Candida biofilms were investigated. The concentrations of UDA released from commercial DL were determined by gas chromatography-mass spectrometry (GC-MS). Minimum inhibitory concentration (MIC) and minimum fungistatic concentration (MFC) tests were performed for C. albicans or C. glabrata, with UDA for comparison with the concentrations released from DL. Specimens of DL with (experimental group) and without UDA (control group) were fabricated, and Candida biofilms were developed on DL surfaces. Biofilms were evaluated by cell counts, metabolic activity, structure, and secretion of proteinase or phospholipase. The concentrations of UDA released were within the MIC and MFC ranges. In the presence of UDA, C. albicans biofilms were thinner and had lower numbers of viable and active cells, although no significant enzymatic changes were observed relative to the control group (p > 0.05). In contrast, C. glabrata biofilms exhibited higher cell counts and greater metabolic activity and also increased proteinase activity in the presence of UDA relative to the control group (p < 0.05). Overall, UDA did not prevent Candida biofilm formation.
Assuntos
Antifúngicos/farmacologia , Biofilmes/efeitos dos fármacos , Candida albicans/efeitos dos fármacos , Candida glabrata/efeitos dos fármacos , Reembasadores de Dentadura/microbiologia , Ácidos Undecilênicos/farmacologia , Análise de Variância , Antifúngicos/análise , Contagem de Colônia Microbiana , Cromatografia Gasosa-Espectrometria de Massas , Humanos , Testes de Sensibilidade Microbiana , Saliva , Ácidos Undecilênicos/análiseRESUMO
To test the effect of distinct solubilities of dentine and enamel on mineral ion concentration in the biofilm fluid during a sugar-induced pH drop, dental biofilms were formed in situ for 4 days on acrylic (control), dentine or enamel. On the 5th day, they were treated with water (control) or 20% glucose and collected 5 min later. Significantly lower pH values and higher calcium concentrations were found in the biofilm fluid after glucose exposure, without significant differences among the three substrates. During pH drop, biofilm reservoirs release calcium to the fluid, masking the differential solubility between enamel and dentine.
Assuntos
Biofilmes , Esmalte Dentário/microbiologia , Dentina/microbiologia , Glucose/farmacologia , Minerais/análise , Resinas Acrílicas , Cálcio/análise , Estudos Cross-Over , Solubilidade do Esmalte Dentário/efeitos dos fármacos , Materiais Dentários , Solubilidade da Dentina/efeitos dos fármacos , Fluoretos/análise , Humanos , Concentração de Íons de Hidrogênio , Fósforo/análise , Método Simples-Cego , Fatores de Tempo , ÁguaRESUMO
Although the effect of acidulated phosphate fluoride gel (APF gel) on caries reduction in permanent teeth is based on evidence, the relevance of the clinical application time is still under debate. Also, the effect of 4- versus 1-min application has not been evaluated in deciduous enamel. In a blind, crossover, in situ study of 14 days, 16 adult volunteers wore palatal appliances containing slabs of human permanent and deciduous enamel. At the beginning of each phase, the slabs were submitted to one of the following treatments: no APF application (negative control); APF gel (1.23% F) application for 1 or 4 min. Biofilm accumulation on the slab surface was allowed and the slabs were subjected eight times a day to 20% sucrose, simulating a high cariogenic challenge condition. On the 15th day of each phase, fluoride retained as CaF(2) and fluorapatite (FAp) was determined on the enamel of the slabs and demineralization was assessed by cross-sectional microhardness. Fluoride as CaF(2) and FAp, formed by APF gel application on the enamel slabs not subjected to the cariogenic challenge, was also determined. APF gel reduced demineralization in both enamel types (p < 0.05), but the difference between 1 and 4 min was not statistically significant (p > 0.05). CaF(2) and FAp formed and retained on deciduous and permanent enamel was significantly higher in APF gel groups (p < 0.05), but no significant difference was found between 1 and 4 min (p > 0.05). The findings suggest that 1 min of APF gel application provides a similar effect on inhibition of demineralization as 4 min, for both permanent and deciduous enamel.
Assuntos
Fluoreto de Fosfato Acidulado/uso terapêutico , Cariostáticos/uso terapêutico , Esmalte Dentário/efeitos dos fármacos , Fluoretos Tópicos/uso terapêutico , Desmineralização do Dente/prevenção & controle , Dente Decíduo/efeitos dos fármacos , Fluoreto de Fosfato Acidulado/administração & dosagem , Adolescente , Adulto , Apatitas/análise , Apatitas/farmacocinética , Biofilmes/efeitos dos fármacos , Fluoreto de Cálcio/análise , Fluoreto de Cálcio/farmacocinética , Cariogênicos/farmacologia , Cariostáticos/administração & dosagem , Estudos Cross-Over , Esmalte Dentário/metabolismo , Sacarose Alimentar/farmacologia , Fluoretos Tópicos/administração & dosagem , Géis , Dureza , Humanos , Método Simples-Cego , Fatores de Tempo , Desmineralização do Dente/metabolismo , Dente Decíduo/metabolismo , Adulto JovemRESUMO
Because dentin is more caries-susceptible than enamel, its demineralization may be more influenced by additional fluoride (F). We hypothesized that a combination of professional F, applied as acidulated phosphate F (APF), and use of 1100-ppm-F dentifrice would provide additional protection for dentin compared with 1100-ppm-F alone. Twelve adult volunteers wore palatal appliances containing root dentin slabs, which were subjected, during 4 experimental phases of 7 days each, to biofilm accumulation and sucrose exposure 8x/day. The volunteers were randomly assigned to the following treatments: placebo dentifrice (PD), 1100-ppm-F dentifrice (FD), APF + PD, and APF+FD. APF gel (1.23% F) was applied to the slabs once at the beginning of the experimental phase, and the dentifrices were used 3x/day. APF and FD increased F concentration in biofilm fluid and reduced root dentin demineralization, presenting an additive effect. Analysis of the data suggests that the combination of APF gel application and daily regular use of 1100-ppm-F dentifrice may provide additional protection against root caries compared with the dentifrice alone.
Assuntos
Fluoreto de Fosfato Acidulado/uso terapêutico , Biofilmes/efeitos dos fármacos , Cariostáticos/uso terapêutico , Dentifrícios/uso terapêutico , Dentina/efeitos dos fármacos , Fluoretos/uso terapêutico , Desmineralização do Dente/prevenção & controle , Raiz Dentária/efeitos dos fármacos , Fluoreto de Fosfato Acidulado/administração & dosagem , Adulto , Apatitas/análise , Fluoreto de Cálcio/análise , Cariogênicos/efeitos adversos , Cariostáticos/administração & dosagem , Estudos Cross-Over , Placa Dentária/microbiologia , Dentifrícios/administração & dosagem , Dentina/microbiologia , Método Duplo-Cego , Combinação de Medicamentos , Fluoretos/administração & dosagem , Géis , Dureza , Humanos , Microrradiografia , Placebos , Sacarose/efeitos adversos , Fatores de Tempo , Raiz Dentária/microbiologia , Adulto JovemRESUMO
The aim of this study was to evaluate the correlation between patients' and dentist's assessment of dentures and to correlate these variables with objective measures of masticatory function. A sample of 28 edentulous individuals was selected, all wearing both complete dentures for at least 6 months and with no signs or symptoms of temporomandibular joint disorders. They rated their level of satisfaction with their dentures from 0 to 100 by means of a visual analogue scale, and dentures were scored by a dentist from 0 to 9 considering functional aspects. Tooth wear was evaluated on the posterior teeth of dentures considering the lack of occlusal anatomy. Masticatory performance and swallowing threshold tests were performed with an artificial test food (Optocal), and the median particle size was determined by the sieving method. The results showed that the mean satisfaction value of volunteers with their dentures was 49·1 and the median score of dentist's evaluation was 6. The Spearman correlation coefficient revealed no significant correlation between patients' and dentist's assessment of dentures (P>0·05). The median particle size for masticatory performance and swallowing thresholds was 5·5 ± 1·0 and 4·9 ± 1·2 mm, respectively. Data of both masticatory tests showed no significant correlation with patients' satisfaction or with dentist's evaluation of dentures. There was no difference of food comminution between subjects with and without excessive posterior tooth wear. It can be concluded that dentist's and patients' assessment of dentures were not correlated, and no correlation was observed between these variables and masticatory function.
Assuntos
Atitude do Pessoal de Saúde , Deglutição/fisiologia , Prótese Total/psicologia , Mastigação/fisiologia , Satisfação do Paciente , Idoso , Idoso de 80 Anos ou mais , Desgaste de Restauração Dentária , Odontólogos/psicologia , Feminino , Alimentos , Humanos , Masculino , Pessoa de Meia-Idade , Boca Edêntula/fisiopatologia , Avaliação de Resultados em Cuidados de Saúde , Tamanho da Partícula , Estatísticas não ParamétricasRESUMO
It has been suggested that craniofacial morphology plays an important role in masticatory function, however, there are controversies and unsolved questions that still require elucidation. The aims of this study were to evaluate masticatory performance, mandibular movement, electromyographic (EMG) activity and muscle effort of masseter and anterior temporal muscles during mastication. Seventy-eight dentate subjects were selected and divided into three groups according to vertical facial pattern: brachyfacial, mesofacial and dolichofacial. Silicon-based material was used for chewing tests. Masticatory performance was determined by a 10-sieve method, and masticatory movements during mastication were assessed using a 3D mandibular tracking device. Electromyographic activities of masseter and anterior temporal muscles were evaluated during mastication, and muscle effort was calculated by the percentage of activity required for mastication based on maximum muscle effort. Data were analysed using anova and anova on-ranks tests. Dolichofacial subjects presented significantly poorer masticatory performance (6·64±2·04; 4·33±0·70 and 3·67±0·63), slower rate of chewing (1·34±0·27, 1·18±0·22 and 1·21±0·20 cycles per second) and larger posterior displacement during mastication (6·22±2·18; 5·18±1·87 and 5·13±1·89) than meso- and brachyfacial individuals, respectively. No statistical difference was detected among groups for the other masticatory movement parameters. There was no difference in absolute EMG amplitudes of masseter and anterior temporal muscles during mastication among groups, but the relative effort of both muscles was higher in dolichofacial, followed by meso- and brachyfacial subjects (masseter: 39·34± 2·25; 36·87±4·05 and 33·33±4·15; anterior temporal: 38·12±1·61; 38·20±8·01 and 35·75±2·48). It was concluded that the vertical facial pattern influences masticatory performance, mandibular movement during mastication and the effort masticatory muscles required for chewing.
Assuntos
Eletromiografia , Face/anatomia & histologia , Mastigação/fisiologia , Músculos da Mastigação/fisiologia , Músculo Temporal/fisiologia , Análise de Variância , Ossos Faciais/anatomia & histologia , Músculos Faciais/anatomia & histologia , Feminino , Humanos , Processamento de Imagem Assistida por Computador , Masculino , Silício , Dimensão Vertical , Adulto JovemRESUMO
Models to evaluate the anticaries potential of fluoride (F) formulations containing monofluorophosphate (MFP) should consider the release of F ion to the oral environment by its enzymatic hydrolysis. This was tested in situ, using a test plaque of a strain of Streptococcus mutans which presents high MFPase activity at pH 5.0. The test plaque was exposed to non-F or MFP (1,450 microg F/g) dentifrices and the fluid phase of the plaque was analyzed after 15, 30, 45 and 75 min. MFP concentration in the plaque fluid decreased over time after exposure to MFP dentifrice, but F ion reached 134.9 +/- 32.0 microM at 15 min and decreased significantly only at 75 min, suggesting continuous MFP hydrolysis by the test plaque.
Assuntos
Cariostáticos/metabolismo , Placa Dentária/microbiologia , Fluoretos/metabolismo , Fosfatos/metabolismo , Streptococcus mutans/metabolismo , Adolescente , Adulto , Cálcio/análise , Cariostáticos/análise , Compostos Cromogênicos , Estudos Cross-Over , Placa Dentária/química , Dentifrícios/metabolismo , Método Duplo-Cego , Feminino , Fluoretos/análise , Humanos , Concentração de Íons de Hidrogênio , Hidrólise , Cinética , Masculino , Pessoa de Meia-Idade , Fosfatos/análise , Monoéster Fosfórico Hidrolases/metabolismo , Espectrofotometria , Streptococcus mutans/enzimologia , Fatores de Tempo , Adulto JovemRESUMO
Although the anticaries effect of fluoride (F) dentifrices is clearly established, the relative importance of F taken up by dental plaque not removed by brushing and of F products (CaF(2)-like) formed on totally cleaned enamel for the subsequent inhibition of demineralization is not known. Both effects were evaluated using conventional (1,100 microg F/g) and low-F concentration (500 microg F/g) dentifrices in a randomized, crossover, double-blind in situ study. Enamel blocks not treated or pretreated with the dentifrices to form CaF(2)-like deposits were mounted in palatal appliances in contact with a Streptococcus mutans test plaque. Volunteers brushed with non-F (negative control), low-F or conventional dentifrices and inserted the appliance in the mouth. F concentration in the fluid and solid phases of the test plaque was determined after 30 min, and a rinse with 20% sucrose solution was performed. After additional 45 min, plaque was collected and the loss of surface hardness at different test-plaque depths was measured. CaF(2)-like deposition on enamel and F taken up by plaque due to the use of F dentifrices were able to significantly increase F concentration in the fluid phase of the test plaque, but only the latter significantly reduced the loss of hardness because of the 20-30 times higher F concentration. Also, significant differences between the low-F and conventional dentifrices were observed for F on enamel, in plaque and on the subsequent loss of hardness. The results suggest that uptake of F by dental plaque not removed by brushing may be the main cause of the anticaries effect of F dentifrices.