RESUMO
In this paper, we present an experimental observation of the phenomenon known as zero-group velocity (ZGV) combined harmonic generation, which is induced by the mixing of counter-directional Lamb waves. We utilize internal resonant conditions to selectively choose the primary mode pair at specific frequencies for the purpose of combined harmonic generation. To detect the ZGV combined harmonic component, we propose a hybrid system that incorporates dual wedge-transducers for generation and a laser interferometric system for receiving. The appearance of the predicted S1-ZGV combined harmonic at a specific mixing frequency is clearly observed in our experiments. Furthermore, we experimentally verify the controllability of the generated combined harmonics induced by the mixing of Lamb waves.
RESUMO
Zero-Group-Velocity (ZGV) Lamb waves in elastic plates had been conducted extensive theoretical and experimental researches in the field of ultrasonic nondestructive testing. The ZGV modes in complex structures had been studied theoretically, but less attention had been paid to their experimental investigation. This paper reports the experimental observation of Zero-Group-Velocity Feature Guided Waves (ZGV-FGWs) in a welded joint using the pitch-catch measurement technique with air-coupled ultrasonic transducers. Firstly, for the elastic plate, it is verified that the received time-domain signal using the pitch-catch measurement method with air-coupled ultrasonic transducers is indeed ZGV Lamb waves. Subsequently, we applied the same pitch-catch measurement method with air-coupled ultrasonic transducers to receive time-domain signals at different excitation frequencies in the welded joint. It is observed that the received time-domain signals in the welded joint oscillate for extended periods of time. By performing short-time Fourier transforms on the received time-domain signals, we analyze the frequency content of the received time-domain signals at different excitation carrier frequencies. By analyzing the spectral amplitude variations of these signals at different excitation carrier frequencies, it can be demonstrated that the spectral amplitude corresponding to the resonance frequency is the largest. These findings collectively affirm that the received time-domain signals in the welded joint exhibit ZGV characteristics, identified as ZGV-FGWs. Consequently, from an experimental perspective, the presence of ZGV-FGWs in the welded joint is verified. Moreover, the experimentally determined resonance frequency of ZGV-FGWs concurs with the results obtained through simulation. This study confirms the feasibility of using the pitch-catch measurement method with air-coupled ultrasonic transducers to excite ZGV-FGWs in a welded joint and provides a reference for future experimental investigations of ZGV-FGWs in complex structures.
RESUMO
Ultrasonic imaging is crucial in the fields of biomedical engineering for its deep penetration capabilities and non-ionizing nature. However, traditional techniques heavily rely on impedance differences within objects, resulting in poor contrast when imaging acoustically transparent targets. Here, we propose a compact spatial differentiator for underwater isotropic edge-enhanced imaging, which enhances the imaging contrast without the need for contrast agents or external physical fields. This design incorporates an amplitude meta-grating for linear transmission along the radial direction, combined with a phase meta-grating that utilizes focus and spiral phases with a first-order topological charge. Through theoretical analysis, numerical simulations, and experimental validation, we substantiate the effectiveness of our technique in distinguishing amplitude objects with isotropic edge enhancements. Importantly, this method also enables the accurate detection of both phase objects and artificial biological models. This breakthrough creates new opportunities for applications in medical diagnosis and nondestructive testing.
RESUMO
Photoacoustic imaging is a powerful technique for obtaining high-resolution images of vascular distribution and physiological information about blood by utilizing the light absorption coefficient as an imaging contrast. However, visualizing weakly light-absorbing components without specific contrast agents or multi-wavelength techniques presents a challenge due to significant differences in light absorption between these components and blood. In this study, we propose a novel method that leverages the thermal effect of ultrasound to induce temperature differences and enhance the contrast of photoacoustic imaging. We conducted phantom experiments to verify the feasibility of our method. Our method effectively highlighted weakly light-absorbing components with strong acoustic absorption, even in the presence of highly light-absorbing components such as blood or melanin. Furthermore, it enabled the differentiation of components with similar light absorption but different acoustic absorption.
Assuntos
Acústica , Tomografia Computadorizada por Raios X , Ultrassonografia , Imagens de Fantasmas , MelaninasRESUMO
Considering a trade-off between temporal-spatial resolution and multi-mode nature of Lamb waves, tone bursts with short durations are usually used as excitations in Lamb wave based damage detection. A short-duration excitation usually requires a large amplitude to carry sufficient energy so as to obtain response signals with enough signal-to-noise ratio and cover a large inspection area. In this paper, an alternative Lamb wave damage imaging method using nonlinear chirp (nonlinear frequency modulation, NLFM) excitation with a long duration and a small amplitude is proposed. The signal processing techniques of pulse compression and dispersion compensation are adopted to compress the long-duration wave packets of response signals into short ones. Compared with conventional tone burst excitations with short durations and small amplitudes, due to the long duration of the nonlinear chirp excitation and the use of pulse compression, sufficient energy can be applied to transducers under small amplitude excitations so the image contrast in imaging will not degrade. Furthermore, as large amplitude excitations are no longer required, high voltage amplifiers are not necessary so the hardware of the Lamb wave testing system is simplified. Experiments on a carbon steel plate with an artificial crack are carried out and Lamb wave signals are collected using a linear array consisting of nine PZTs. Experimental results under the NLFM signal and conventional tone bursts are provided. Experimental results show that under the condition of the same excitation amplitude, the proposed method under the NLFM excitation can achieve better imaging quality compared with methods under conventional tone bursts.
RESUMO
In this paper, modelling and numerical perspective of zero-group velocity (ZGV) combined harmonic generated by guided waves mixing are investigated. The conditions for the generation of the ZGV combined harmonic are analyzed by S0-S0 and SH0-SH0 guided waves mixing in an isotropic plate, respectively. The generation of ZGV combined harmonics at sum frequency caused by counter-directional guided waves mixing is observed. It is confirmed that the ZGV combined harmonic with a considerable magnitude can be generated by this counter-directional guided waves mixing when both the internal resonant condition and non-zero power flux are satisfied. The application of generated ZGV combined harmonics for localized material degradation assessment is numerically examined in the given plate. The obtained results indicate that the generated ZGV combined harmonic induced by the counter-directional guided waves mixing can be used to assess the localized material degradation with improved signal-to-noise ratio. This study provides an insight into the physical process of the ZGV combined harmonic generation, and meanwhile offer a promising means for localized material degradation assessment by ZGV combined harmonics generated by guided waves mixing.
RESUMO
Nonlinear guided elastic waves have attracted extensive attention owing to their high sensitivity to microstructural changes. However, based on the widely used second harmonics, third harmonics and static components, it is still difficult to locate the micro-defects. Perhaps the nonlinear mixing of guided waves can solve these problems since their modes, frequencies and propagation direction can be flexibly selected. Note that the phenomena of phase mismatching usually occur due to the lack of precise acoustic properties for the measured samples, and they may affect the energy transmission from the fundamental waves to second-order harmonics as well as reduce the sensitivity to micro-damage. Therefore, these phenomena are systematically investigated to more accurately assessing the microstructural changes. It is theoretically, numerically, and experimentally found that the cumulative effect of difference- or sum-frequency components will be broken by the phase mismatching, accompanied by the appearance of the beat effect. Meanwhile, their spatial periodicity is inversely proportional to the wavenumber difference between fundamental waves and difference- or sum-frequency components. The sensitivity to micro-damage is compared between two typical mode triplets that approximately and exactly meet the resonance conditions, and the better one is utilized for assessing the accumulated plastic deformations in the thin plates.
RESUMO
In this paper, the formation of theoretical error is presented to investigate the acoustic source localization (ASL) error that can be expected from traditional L-shaped, cross-shaped, square-shaped, and modified square-shaped sensor cluster arrangements. The response surface model based on the optimal Latin hypercube design is developed to theoretically study the effects of sensor placement parameters on the error evaluation index of root mean squared relative error (RMSRE) for the four techniques. The ASL results from the four techniques with the optimal placement parameters are analyzed theoretically. The relevant experiments are conducted for verifying the above theoretical research. The results show that the theoretical error, formed by the difference between the true and the predicted wave propagation directions is related to arrangement of sensors. The results also show that the sensor spacing and the cluster spacing are the two parameters that affect the ASL error most. Between these two parameters the sensor spacing has the stronger influence. The RMSRE increases with an increasing sensor spacing and a decreasing cluster spacing. Meanwhile, the interaction effect of placement parameters should be also emphasized, especially that between the sensor spacing and the cluster spacing for the L-shaped sensor cluster-based technique. Among the four cluster-based techniques, the newly modified square-shaped sensor cluster-based technique shows the smallest RMSRE and not the largest number of sensors. This research on error generation and analysis will provide guidance for the optimal sensor arrangements in cluster-based techniques.
RESUMO
A microcrack localization method based on a static component (SC) induced by a primary A0 Lamb wave is proposed. Based on the bilinear stress-strain constitutive model, a two-dimensional finite element model is built to investigate the interaction between microcracks and Lamb waves. The A0 Lamb wave at low frequency is selected to be the primary Lamb wave, which is beneficial to microcracks localization. Based on the time of flight of the generated SC pulse, an indicator named normalized amplitude index is defined for finding the location and number of microcracks. Simulation results show that one or multiple microcracks can be effectively located.
RESUMO
Using the nonlinear interaction effect between ultrasonic Lamb waves and microcracks to detect and locate microcracks has the advantages of fast detection speed and high sensitivity. In this paper, a method for microcrack localization based on cross-shaped sensor clusters in a plate is proposed by combining nonlinear ultrasonic Lamb wave technology and time difference of arrival (TDOA) technology. The antisymmetric (A0) mode at low frequency is chosen as the primary Lamb wave to simplify the complication of the dispersion and multi-mode properties of Lamb waves. The selected mode pair (A0-s0) weakens the influence of the cumulative growth effect of higher harmonics induced by the inherent material nonlinearity on the microcrack characteristic signals. Pulse inversion technique and cross correlation function are used to extract the TDOAs of the nonlinear characteristic signals including microcrack information. The cross-shaped sensor clusters approach proposed for the first time can achieve reliable and fast microcrack localization without being affected by the duration of the excitation signal, and a priori knowledge of group velocities of primary wave modes or generated harmonics. Experimental and numerical results validate the proposed method in isotropic and anisotropic plates. This paper provides a new idea for nonlinear ultrasonic nondestructive evaluation and structural health monitoring of microcracks in plates.
RESUMO
Recent advances in single-cell RNA sequencing (scRNA-seq) techniques lead to an explosion of single-cell atlases from diverse biological contexts. The information of cell-cell signaling events, which underlie multicellular organism function, is embedded in these atlases. Here, we review current strategies of mining cell-cell signaling events from single-cell transcriptomics datasets and highlight examples where functions of predicted cell-cell signaling events from single-cell atlases are further pursued to yield new insights into biological processes.
Assuntos
Análise de Célula Única , Transcriptoma , Comunicação Celular , Transdução de SinaisRESUMO
This paper numerically and experimentally investigates the resonant behavior of one-way Lamb and SH (shear horizontal) mixing method in thin plates with quadratic nonlinearity. When the primary S0-mode Lamb waves and SH0 waves mix in the region with quadratic nonlinearity, both numerical and experimental results verify the generation of the resonant SH0 waves if the resonance condition [Formula: see text] is satisfied. Meanwhile, we find that the acoustic nonlinear parameter (ANP) increases monotonously with material quadratic nonlinearity, the length of the damage region and the frequency of the resonant wave. Furthermore, the damage region can be located by the time-domain signal of the resonant wave based on one-way S0-SH0 mixing method. This study numerically and experimentally reveals that one-way Lamb and SH mixing method is feasible to quantitatively evaluate and locate the damage region of quadratic nonlinearity in thin plates.
RESUMO
This work investigates the feasibility of using a nonlinear low-frequency Lamb wave approach for characterizing the interfacial property of a two-layered plate. Compared with the case of the exact phase-velocity matching, the approximate phase-velocity matching in the low-frequency region can still guarantee the cumulative second-harmonic generation (SHG) of primary Lamb wave propagation, which overcomes the drawbacks arising from the inherent dispersion and multimode features of Lamb wave propagation. For a given two-layered plate, the appropriate mode pair at low frequency consisting of primary Lamb wave and double-frequency Lamb wave (DFLW), which satisfies the approximate phase-velocity matching and nonzero energy flux, is selected to ensure that the amplitude of the generated second harmonic grows within the maximum cumulative distance (MCD). Meanwhile, the numerical analyses indicate that the variation of the SHG efficiency is maximized at the MCD during the interfacial degradation. Using the nonlinear ultrasonic measurement-based experimental setup, the time-domain signal of the second harmonic generated at different propagation distances is conveniently extracted, and then the relative nonlinear acoustic parameter curve consistent with the theoretical prediction is obtained. For examining the influence of interfacial property on the SHG effect of low-frequency Lamb wave propagation, the different annealing cycles of the thin adhesive layer (acrylics) are used to simulate minor changes in the interfacial property of the given two-layered plate. It is found that the relative nonlinear acoustic parameter at the MCD decreases monotonically and sensitively with the increment of annealing cycle number, which verifies the quantitative correlation between the SHG efficiency of low-frequency Lamb wave propagation and the degree of the interfacial degradation. The consistency between the numerical analysis and the experimental measurement shows the potential of using the SHG effect of low-frequency Lamb wave propagation to characterize a minor change in the interfacial properties of a layered composite plate.
RESUMO
Metals which are widely used in many types of industries are usually subjected to fatigue and surface corrosion. There is a demand to detect the surface damage caused by fatigue and corrosion at an early stage to ensure the structural integrity. In this paper, a novel nonlinear ultrasonic technique based on the measure of third-order combined harmonic generation, is proposed to detect and locate the surface damage in 6061 aluminum alloy. Third-order combined harmonic generation caused by non-collinear mixing of one longitudinal wave and one transverse wave at different frequencies, is firstly analyzed and experimentally observed. An experimental procedure of nonlinear scanning is proposed for the damage detection and location by checking the variation of frequency nonlinear response. The correlations of nonlinear frequency mixing responses and surface damage in the specimens are obtained. Results show that the nonlinear response caused by fatigue damage and surface corrosion can be identified and located by this method. In addition, this approach can exclude the nonlinearity induced by the instruments and simplify the signal processing.
RESUMO
The experimental observation of acoustic radiation induced static component (SC) generation by Lamb wave propagation in an elastic plate is first reported. An experimental approach to directly detect the generated SC of primary Lamb wave propagation in an elastic plate is proposed, where a low-frequency wedge transducer is used to detect the SC pulse generated by primary Lamb wave tone-burst that is excited by a high-frequency wedge transducer. The basic requirements are that the group velocity of primary Lamb wave needs to be equal to that of the s0 mode at zero frequency (i.e., the SC), and that the central frequency of the low-frequency wedge transducer needs to be near the center of the main lobe frequency range of the generated SC pulse. For this purpose, the S4 mode whose group velocity is equal to that of the generated SC is selected as the primary Lamb wave, and then the specific mode pair S4-s0 is focused and analyzed. Accompanying propagation of the S4 mode tone-burst, the generated SC pulse detected with the low-frequency wedge transducer is clearly observed. Through respectively measuring the amplitudes of the S4 mode and the generated SC for different spatial separation between the transmitting and receiving wedge transducers, the quantitative relationship of the relative nonlinear acoustic parameter with propagation distance is obtained. The experimental results show that the proposed approach can be used to directly detect the generated SC of Lamb wave propagation, and that the said SC does have a cumulative growth effect with propagation distance.
RESUMO
Modeling of the acoustic-radiation-induced static component (SC) generation of primary Lamb wave tone burst propagating in a layered plate is conducted. Accompanying the propagation of primary Lamb wave tone burst, there are the finite-duration SC bulk driving force in the interior of the layered plate, and the finite-duration SC traction stress on each surface/interface. According to the modal analysis approach for waveguide excitation, the function of the finite-duration SC bulk driving force and traction stress is to generate the finite-duration SC of primary Lamb wave tone burst. Compared with the second harmonic (SH) generation of Lamb wave propagation in a layered plate, the phase velocity matching is no longer required for the generation of the SC with a cumulative growth effect. Based on modeling of the finite-duration SC generation, it is found that the integrated amplitude of the finite-duration SC generated by propagation of the primary Lamb wave tone burst does grow with propagation distance. Meanwhile, the numerical analyses and the finite element (FE) simulations are conducted to investigate the effect of the said SC generation. It is found that, although the interfacial layer of the layered plate considered is quite thin compared with the upper and lower layers, the numerical analyses indicate that the influence of the interfacial property on the cumulative growth effect of the SC of primary Lamb wave is significant. Furthermore, the FE simulations demonstrate that the cumulative SC of primary Lamb wave tone burst will exhibit a monotonic and sensitive response to the degree of interfacial degradation. This investigation provides an physical insight not previously available into the process of the SC generation of Lamb wave propagation in a layered plate.
RESUMO
This study experimentally and numerically investigated the nonlinear behavior of the resonant bulk waves generated by the two-way collinear mixing method in 5052 aluminum alloy with micro-crack damage. When the primary longitudinal and transverse waves mixed in the micro-crack damage region, numerical and experimental results both verified the generation of resonant waves if the resonant condition ωL/ωT=2κ/(κ-1) was satisfied. Meanwhile, we found that the acoustic nonlinearity parameter (ANP) increases monotonously with increases in micro-crack density, the size of the micro-crack region, the frequency of resonant waves and friction coefficient of micro-crack surfaces. Furthermore, the micro-crack damage in a specimen generated by low-temperature fatigue experiment was employed. It was found that the micro-crack damage region can be located by scanning the specimen based on the two-way collinear mixing method.
RESUMO
Nonlinear guided wave has been recognized as a potential means to characterize the state of material microstructures in solids. However, nonlinear guided wave approaches based on second harmonic generation or combined harmonic generation induced by counter-directional wave mixing, are applicable only under the condition that transmitters and receivers are placed at two different ends of the tested structures. These approaches are not effective for characterization of the structures with only one accessible end. In this paper, modeling of the backward combined harmonic at difference frequency induced by one-way mixing of two primary co-directional guided waves is investigated in a circular pipe, where the transmitters and receivers are placed at the same end of the pipe. The backward combined harmonic, generated at difference frequency and propagating in the direction opposite to that of two primary co-directional guided waves, is successfully observed numerically. A strong frequency mixing response characterized by a cumulative growth effect of the generated backward combined harmonic is demonstrated. The use of the generated backward combined harmonic for localized material degradation characterization and location is numerically examined in the given pipe. The obtained results indicate that the use of the backward combined harmonic can locate and characterize the localized material degradations in the given pipe by controlling the mixing zone of two primary co-directional guided waves. This study provides a promising means for characterization of localized degradations in pipes.
RESUMO
This study focuses on static component generation (SCG) and its measurement wherein a group velocity mismatch (GVM) exists between the primary guided wave and the generated static component (SC). The SCGs by primary S0, A0, and SH0 waves are investigated. It is confirmed that the SCs are S0 mode. The GVM causes the temporal waveforms of the SCs to tend to increase in width with propagation distance. A feasible method is proposed accordingly for measurement of SCG with GVM using only lead zirconic titanate based transducers, wherein the SCs generated by two counter-propagating primary waves are modulated and superposed on each other.
RESUMO
In this paper, characterization of the orientation of a microcrack is quantitatively investigated using the directivity of second harmonic radiated by the secondary sound source (SSS) induced by the nonlinear interaction between an incident ultrasonic transverse wave (UTW) and a microcrack. To this end, a two-dimensional finite element (FE) model is established based on the bilinear stress-strain constitutive relation. Under the modulation of contact acoustic nonlinearity (CAN) to the incident UTW impinging on the microcrack examined, the microcrack itself is treated as a SSS radiating the second harmonic. Thus, the directivity of the second harmonic radiated by the SSS is inherently related to the microcrack itself, including its orientation. Furthermore, the effects of the stiffness difference between the compressive and tensile phases in the bilinear stress-strain model, and the UTW driving frequency, as well as the radius of the sensing circle on the SSS directivity are discussed. The FE results show that the directivity pattern of the second harmonic radiated by the SSS is closely associated with the microcrack orientation, through which the microcrack orientation can be characterized without requiring a baseline signal. It is also found that the SSS directivity varies sensitively with the driving frequency of the incident UTW, while it is insensitive to the stiffness difference between the compressive and tensile phases in the bilinear stress-strain model and the radius of the sensing circle. The results obtained here demonstrate that the orientation of a microcrack can be characterized using the directivity of the SSS induced by the interaction between the incident UTW and the microcrack.