Tailoring Versatile Cathodes and Induced Anodes for Zn-Se Batteries: Anisotropic Orientation of Tin-Based Materials within Bowl-In-Ball Carbon.

The advancement of Zn-Se batteries has been hindered by significant challenges, such as the sluggish kinetics of Se cathodes, limited Se loading, and uncontrollable formation of Zn dendrites. In this study, a bidirectional optimization strategy is devised for both cathode and anode to bolster the performance of Zn-Se batteries. A novel bowl-in-ball structured carbon (BIBCs) material is synthesized to serve as a nanoreactor, in which tin-based materials are grown and derived in situ to construct cathodes and anodes. Within the cathode, the multifunctional host material (SnSe@BIBCs) exhibits large adsorption capacity for selenium, and demonstrates supreme catalytic properties and spatially confined characteristics toward the selenium reduction reaction (SeRR). On the anode, Sn@BIBCs displays triple-induced properties, including the zincophilic of the internal metallic Sn, the homogenized spatial electric field from the 3D spatial structure, and the curvature effect of the bowl-shaped carbon. Collectively, these factors induce preferential nucleation of Zn, ensuring its uniform deposition. As a result, the integrated Zn-Se battery system achieves a remarkable specific capacity of up to 603 mAh g-1 and an impressive energy density of 581 W kg-1, highlighting its tremendous potential for practical applications.

Polyoxometalate-Intercalated Tremella-Like CoNi-LDH Nanocomposites for Electrocatalytic Nitrite-Ammonia Conversion.

The electrocatalytic reduction of NO2- (NO2RR) holds promise as a sustainable pathway to both promoting the development of emerging NH3 economies and allowing the closing of the NOx loop. Highly efficient electrocatalysts that could facilitate this complex six-electron transfer process are urgently desired. Herein, tremella-like CoNi-LDH intercalated by cyclic polyoxometalate (POM) anion P8W48 (P8W48/CoNi-LDH) prepared by a simple two-step hydrothermal-exfoliation assembly method is proposed as an effective electrocatalyst for NO2- to NH3 conversion. The introduction of POM with excellent redox ability tremendously increased the electrocatalytic performance of CoNi-LDH in the NO2RR process, causing P8W48/CoNi-LDH to exhibit large NH3 yield of 0.369 mmol h-1 mgcat-1 and exceptionally high Faradic efficiency of 97.0% at -1.3 V vs the Ag/AgCl reference electrode in 0.1 M phosphate buffer saline (PBS, pH = 7) containing 0.1 M NO2-. Furthermore, P8W48/CoNi-LDH demonstrated excellent durability during cyclic electrolysis. This work provides a new reference for the application of POM-based nanocomposites in the electrochemical reduction of NO2- to obtain value-added NH3.

Preparation of cyclodextrin polymer-functionalized polyaniline/MXene composites for high-performance supercapacitor.

Controlled aggregation is of great significance in designing nanodevices with high electrochemical performance. In this study, an in situ aggregation strategy with cyclodextrin polymer (CDP) was employed to prepare polyaniline (PANI)/MXene (MX) composites. MXene served as a two-dimensional structure template. Due to supramolecular interactions, CDP could be controllably modified with PANI layers, effectively preventing the self-polymerization of PANI. As a result, this integration facilitated a more uniform growth of PANI on MXene and further improved the capacitance performance of CDP-MX/PA. In a three-electrode system, the specific capacitance of MX/PA at 1 A g-1 was 460.8 F g-1, which increased to 523.8 F g-1 after CDP-induced growth. CDP-MX/PA exhibited a high energy density of 27.7 W h kg-1 at a power density of 700 W kg-1. This suggests that the synthetic strategy employed in this study holds promise in providing robust support for the preparation of high-performance energy-storage device.

Polyoxomolybdate-Based Metal-Organic Framework-Derived Cu-Embedded Molybdenum Dioxide Hybrid Nanoparticles as Highly Efficient Electrocatalysts for Al-S Batteries.

High-performance rechargeable aluminum-sulfur batteries (RASB) have great potential for various applications owing to their high theoretical capacity, abundant sulfur resources, and good safety. Nevertheless, the practical application of RASB still faces several challenges, including the polysulfide shuttle phenomenon and low sulfur utilization efficiency. Here, we first developed a synergistic copper heterogeneous metal oxide MoO2 derived from polymolybdate-based metal-organic framework as an efficient catalyst for mitigating polysulfide diffusion. This composite enhances sulfur utilization and electrical conductivity of the cathode. DFT calculations and experimental results reveal the catalyst Cu/MoO2@C not only effectively anchors aluminum polysulfides (AlPSs) to mitigate the shuttle effect, but also significantly promotes the catalytic conversion of AlPSs on the sulfur cathode side during charging and discharging. The unique nanostructure contains abundant electrocatalytic active sites of oxide nanoparticles and Cu clusters, resulting in excellent electrochemical performance. Consequently, the established RASB exhibits an initial capacity of 875 mAh g-1 at 500 mA g-1 and maintains a capacity of 967 mAh g-1 even at a high temperature of 50 °C.

Bifunctional K3PW12O40/Graphene Oxide-Modified Separator for Inhibiting Polysulfide Diffusion and Stabilizing Lithium Anode.

Lithium-sulfur (Li-S) batteries are considered as promising candidates for next-generation batteries due to their high theoretical energy density. However, the practical application of Li-S batteries is still hindered by several challenges, such as the polysulfide shuttle and the growth of lithium dendrites. Herein, we introduce a bifunctional K3PW12O40/graphene oxide-modified polypropylene separator (KPW/GO/PP) as a highly effective solution for mitigating polysulfide diffusion and protecting the lithium anode in Li-S batteries. By incorporating KPW into a densely stacked nanostructured graphene oxide (GO) barrier membrane, we synergistically capture and rapidly convert lithium polysulfides (LiPSs) electrochemically, thus effectively suppressing the shuttling effect. Moreover, the KPW/GO/PP separator can stabilize the lithium metal anode during cycling, suppress dendrite formation, and ensure a smooth and dense lithium metal surface, owing to regulated Li+ flux and uniform Li nucleation. Consequently, the constructed KPW/GO/PP separator delivered a favorable initial specific capacity (1006 mAh g-1) and remarkable cycling performance at 1.0 C (626 mAh g-1 for up to 500 cycles with a decay rate of 0.075% per cycle).

Ultrafast Synthesis of Graphene-Embedded Cyclodextrin-Metal-Organic Framework for Supramolecular Selective Absorbency and Supercapacitor Performance.

Limited by preparation time and ligand solubility, synthetic protocols for cyclodextrin-based metal-organic framework (CD-MOF), as well as subsequent derived materials with improved stability and properties, still remains a challenge. Herein, an ultrafast, environmentally friendly, and cost-effective microwave method is proposed, which is induced by graphene oxide (GO) to design CD-MOF/GOs. This applicable technique can control the crystal size of CD-MOFs from macro- to nanocrystals. CD-MOF/GOs are investigated as a new type of supramolecular adsorbent. It can selectively adsorb the dye molecule methylene green (MG) owing to the synergistic effect between the hydrophobic nanocavity of CDs, and the abundant O-containing functional groups of GO in the composites. Following high temperature calcination, the resulting N, S co-doped porous carbons derived from CD-MOF/GOs exhibit a high capacitance of 501 F g-1 at 0.5 A g-1 , as well as stable cycling stability with 90.1% capacity retention after 5000 cycles. The porous carbon exhibits good electrochemical performance due to its porous surface containing numerous electrochemically active sites after dye adsorption and carbonization. The design strategy by supramolecular incorporating a variety of active molecules into CD-MOFs optimizes the properties of their derived materials, furthering development toward the fabrication of zeitgeisty and high-performance energy storage devices.

Polyoxometalates@Metal-Organic Frameworks Derived Bimetallic Co/Mo2 C Nanoparticles Embedded in Carbon Nanotube-Interwoven Hierarchically Porous Carbon Polyhedron Composite as a High-Efficiency Electrocatalyst for Al-S Batteries.

Al-S battery (ASB) is a promising energy storage device, notable for its safety, crustal abundance, and high theoretical energy density. However, its development faces challenges due to slow reaction kinetics and poor reversibility. The creation of a multifunctional cathode material that can both adsorb polysulfides and accelerate their conversion is key to advancing ASB. Herein, a composite composed of polyoxometalate nanohybridization-derived Mo2 C and N-doped carbon nanotube-interwoven polyhedrons (Co/Mo2 C@NCNHP) is proposed for the first time as an electrochemical catalyst in the sulfur cathode. This composite improves the utilization and conductivity of sulfur within the cathode. DFT calculations and experimental results indicate that Co enables the chemisorption of polysulfides while Mo2 C catalyzes the reduction reaction of long-chain polysulfides. X-ray photoelectron spectroscopy (XPS) and in situ UV analysis reveal the different intermediates of Al polysulfide species in Co/Mo2 C@NCNHP during discharging/charging. As a cathode material for ASB, Co/Mo2 C@NCNHP@S composite can deliver a discharge-charge voltage hysteresis of 0.75 V with a specific capacity of 370 mAh g-1 after 200 cycles at 1A g-1 .

Polyoxometalate-Cyclodextrin-Based Cluster-Organic Supramolecular Framework for Polysulfide Conversion and Guest-Host Recognition in Lithium-sulfur Batteries.

Developing polyoxometalate-cyclodextrin cluster-organic supramolecular framework (POM-CD-COSF) still remains challenging due to an extremely difficult task in rationally interconnecting two dissimilar building blocks. Here we report an unprecedented POM-CD-COSF crystalline structure produced through the self-assembly process of a Krebs-type POM, [Zn2 (WO2 )2 (SbW9 O33 )2 ]10- , and two ß-CD units. The as-prepared POM-CD-COSF-based battery separator can be applied as a lightweight barrier (approximately 0.3 mg cm-2 ) to mitigate the polysulfide shuttle effect in lithium-sulfur batteries. The designed Li-S batteries equipped with the POM-CD-COSF modified separator exhibit remarkable electrochemical performance, attributed to fast Li+ diffusion through the supramolecular channel of ß-CD, efficient polysulfide-capture ability by the dynamic host-guest interaction of ß-CD, and improved sulfur redox kinetics by the bidirectional catalysis of POM cluster. This research provides a broad perspective for the development of multifunctional supramolecular POM frameworks and their applications in Li-S batteries.

Polyvinylpyrrolidone-Intercalated Mn0.07 VOx toward High Rate and Long-Life Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are expected to be an attractive alternative in advanced energy storage devices due to large abundance and dependable security. Nevertheless, the undesirable energy density and operating voltage still hinder the development of AZIBs, which is intimately associated with the fundamental properties of the cathode. In this work, polyvinylpyrrolidone (PVP) intercalated Mn0.07 VOx (PVP-MnVO) with a large interlayer spacing of 13.5 Å (against 12.5 Å for MnVO) synthesized by a facile hydrothermal method is adopted for the cathode in AZIBs. The experimental results demonstrate that PVP-MnVO with expanded interlayer spacing provides beneficial channels for the rapid diffusion of Zn2+ , resulting in a high discharge capacity of 402 mAh g-1 at 0.1 A g-1 , superior to that of MnVO (275 mAh g-1 at 0.1 A g-1 ). Meanwhile, the PVP molecule remains in the layer structure as a binder/pillar, which can maintain its structural integrity well during the charging/discharging process. Consequently, PVP-MnVO cathode exhibits superior rate capability and cycling stability (89% retention after 4300 cycles at 10 A g-1 ) compared to that of MnVO (≈51% retention over 500 cycles at 2 A g-1 ). This work proposes a new approach to optimize the performance of vanadium-based electrode materials in AZIBs.

Rapid Synthesis of Oxygen-Enriched Porous Carbon through a Microwave Method and Its Application in Supercapacitors.

In this study, a strategy for the rapid and simple preparation of porous carbon (PC) using the microwave method was proposed. Oxygen-rich PC was synthesized by microwave irradiation in air, where potassium citrate and ZnCl2 served as the carbon source and microwave absorber, respectively. ZnCl2 achieves microwave absorption through dipole rotation, which uses ion conduction to convert heat energy in the reaction system. In addition, potassium salt etching improved the porosity of PCs. The PC prepared under optimal conditions had a large specific surface area (902 m2·g-1) and exhibited a significant specific capacitance (380 F·g-1) in the three-electrode system at 1 A·g-1. The energy and power densities of the assembled symmetrical supercapacitor device based on PC-375W-0.4 were 32.7 W·h·kg-1 and 0.65 kW·kg-1, respectively, at a current density of 1 A·g-1. Even after 5000 cycles at 5 A·g-1 current density, the excellent cycle life retained 94% of its initial capacitance.

Keggin-type polyoxometalate-based crown ether complex for lithium-sulfur batteries.

A novel supramolecular complex Li3Cl[(HPW12O40)(H24C12O6)3(CH3CN)2] {CR-PW12} was confirmed first to apply as a sulfur host in lithium-sulfur batteries. The {CR-PW12}@S cathode exhibits a reversible capacity of 1120 mA h g-1 at 1.0 C and excellent cycle stability.

Supramolecular Design Strategy of a Water-Soluble Diphenylguanidine-Cyclodextrin Polymer Inclusion Complex.

Diphenylguanidine (DPG) is a widely used secondary accelerator for the vulcanization of natural rubber (NR) latex. However, its low water solubility and high toxicity limit its use in high-end NR products. In this study, a water-soluble inclusion complex of DPG and a ß-cyclodextrin polymer (ß-CDP), termed DPG-ß-CDP, was prepared through supramolecular interactions and characterized using Fourier-transform infrared spectroscopy, 1H NMR, scanning electron microscopy, and UV-vis spectroscopy techniques. In comparison with that of DPG, the water solubility of DPG-ß-CDP was greatly enhanced because of the water-soluble host molecule. The molar ratio of DPG to the CD unit in ß-CDP was determined to be 1:1. At 25 °C, the binding constant of DPG-ß-CDP was found to be 9.2 × 105 L/mol by UV-vis spectroscopy. The proposed method for forming inclusion complexes with high potential for use as water-soluble vulcanization accelerators is promising.

Design Strategy for Vulcanization Accelerator of Diphenylguanidine/Cyclodextrin Inclusion Complex for Natural Rubber Latex Foam with Enhancing Performance.

Vulcanization is an essential process to obtain high-performance rubber products. Diphenylguanidine (DPG) is often used as the secondary accelerator in the vulcanization process of natural rubber (NR) latex. However, DPG would make NR latex emulsion exhibit gelation, resulting in the negative vulcanization efficiency. In addition, exposure to DPG might lead to some physiological diseases during the production process of DPG doped NR latex. Hydroxypropyl-ß-cyclodextrin (HP-ß-CD) with the hydrophobic interior and hydrophilic exterior has the advantages of good water solubility, high bioavailability, reliable stability, and low toxicity. In this study, the inclusion complex of diphenylguanidine-hydroxypropyl-ß-cyclodextrin (DPG-HP-ß-CD) is prepared by ball milling with a host-guest molar ratio of 1 : 1, which has also been applied to the foaming process of NR latex. The mechanical properties of DPG-HP-ß-CD inclusion complex/natural rubber latex foam (DPG-HP-ß-CD/NRLF) have been significantly improved, including the tensile strength, elongation at break, hardness, compression set, resilience, and antiaging performance. Further, the usage of DPG has been reduced, leading to the reduction of toxicity and environmental hazards.

Nitrogen and Sulfur Codoped Porous Carbon Directly Derived from Potassium Citrate and Thiourea for High-Performance Supercapacitors.

By introducing a heteroatom into carbon material, an effective improvement in capacitance can be realized owing to surface oxidation and reduction reactions of pseudocapacitors. Herein, a simple one-pot carbonization activation method was proposed to convert potassium citrate into three-dimensional interconnected porous carbon (PC). Then, an effective double heteroatom doping method by thiourea was used to prepare nitrogen-sulfur-doped PC (N,S-PC). This porous structure facilitates the storage of a large number of ions and reduces their diffusion path. The synthesized N,S-PC nanomaterial has a capacitance of 674 F/g at 1 A/g in a 1 M H2SO4 electrolyte, can retain 94.41% of the initial capacitance after 10 000 cycles at 5 A/g, and has a long cycle life. More importantly, a symmetric supercapacitor assembled with this material can exhibit an energy density of up to 32.6 (W·h)/kg at a high-power density of 750 W/kg. This is due to the high performance of N,S-PC in supercapacitor electrode materials.

Wide-Temperature-Range Li-S Batteries Enabled by Thiodimolybdate [Mo2S12]2- as a Dual-Function Molecular Catalyst for Polysulfide Redox and Lithium Intercalation.

In lithium-sulfur batteries, a serious obstacle is the dissolution and diffusion of long-chain polysulfides, resulting in rapid capacity decay and low Coulombic efficiency. At present, a common practice is designing cathode materials to solve this problem, but this gives rise to reduced gravimetric and volumetric energy densities. Herein, we present a thiodimolybdate [Mo2S12]2- cluster as sulfur host material that can effectively confine the shuttling of polysulfides and contribute its own capacity in Li-S cells. Moreover, the [Mo2S12]2- cluster as a "bidirectional catalyst" can effectively catalyze polysulfide reduction and lithium sulfide oxidation. We further investigate the catalytic mechanism of [Mo2S12]2- clusters by theoretical calculations, in situ spectroscopic techniques, and electrochemical studies. The (NH4)2Mo2S12/S cathodes show good electrochemical performance under a wide range of temperatures. In addition, a pouch cell fabricated with (NH4)2Mo2S12/S cathodes maintains a stable output for more than 50 cycles.

Rational Design Hierarchical SnS2 Uniformly Adhered to Three-Sided Carbon Active Sites to Enhance Sodium Storage.

Reducing material accumulation and designing reasonable sizes are critical strategies for increasing the rate and cycling stability of electrode materials. Herein, we presented a double-walled hollow carbon spheres (DWHCSs) loading strategy for achieving ultrafine SnS2 nanosheet adhesion by utilizing three-sided active sites of the interior/exterior carbon walls. The structure effectively shortened the electron/ion transport path, increased the effective contact between electrolyte and electrode material, and promoted ion diffusion kinetics. Furthermore, the hollow structure can adapt to the volume change of the electrode during the cycle, preventing active substances from draining. Based on the above advantages, SnS2@DWHCSs as an anode material for sodium ion batteries (SIBs) exhibited a distinguished reversible capacity of 665.7 mA h g-1 at 2 A g-1 after 1000 cycles, and a superior rate ability of 377.6 mA h g-1 at an ultrahigh rate of 10 A g-1. The outstanding electrochemical performance revealed that the structure exhibited a broad application prospect in the field of energy storage and provided a reference for the rational design of other 2D materials.

Carbon Nanofibers Based on Potassium Citrate/Polyacrylonitrile for Supercapacitors.

Wearable supercapacitors based on carbon materials have been emerging as an advanced technology for next-generation portable electronic devices with high performance. However, the application of these devices cannot be realized unless suitable flexible power sources are developed. Here, an effective electrospinning method was used to prepare the one-dimensional (1D) and nano-scale carbon fiber membrane based on potassium citrate/polyacrylonitrile (PAN), which exhibited potential applications in supercapacitors. The chemical and physical properties of carbon nanofibers were characterized by X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and the Brunnauer-Emmett-Teller method. The fabricated carbon nanofiber membrane illustrates a high specific capacitance of 404 F/g at a current density of 1 A/g. The good electrochemical properties could be attributed to the small diameter and large specific surface area, which promoted a high capacity.

Three-dimensional nano assembly of nickel cobalt sulphide/polyaniline@polyoxometalate/reduced graphene oxide hybrid with superior lithium storage and electrocatalytic properties for hydrogen evolution reaction.

Engineering hierarchical nanostructures with enhanced charge storage capacity and electrochemical activity are vital for the advancement of energy devices. Herein, a highly ordered mesoporous three-dimensional (3D) nano-assembly of Nickel Cobalt Sulphide/Polyaniline @Polyoxometalate/Reduced Graphene Oxide (NiCo2S4/PANI@POM/rGO) is prepared first time via a simple route of oxidative polymerization followed by a hydrothermal method. Morphological analysis of the resulting hybrid reveals the sheet-like structures containing a homogeneous assembly of PANI@POM and NiCo2S4 on the graphene exterior maintaining huge structural integrity, large surface area and electrochemically active centres. The electrochemical analysis of the nanohybrid as the anode of the lithium-ion battery (LIB) has delivered ultra-huge reversible capacity of 735.5 mA h g-1 (0.1 A g-1 after 200 cycles), superb capacity retention (0.161% decay/per cycle at 0.5 A g-1 for 1000 cycles), and significant rate capability (355.6 mA h g-1 at 2 A g-1). The hydrogen evolution reaction (HER) measurement also proves remarkable activity, extremely low overpotential and high durability. The extraordinary performance of the nanohybrid is due to the presence of abundant electroactive centres, high surface area and a large number of ion exchange channels. These outstanding results prove the advantages of a combination of NiCo2S4, graphene sheets, and PANI@POM in energy devices.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen.

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

Embedding Cobalt Atom Clusters in CNT-Wired MoS2 Tube-in-Tube Nanostructures with Enhanced Sulfur Immobilization and Catalyzation for Li-S Batteries.

Lithium-sulfur batteries are one of the most promising next-generation energy storage systems. The efficient interconversion between sulfur/lithium polysulfides and lithium sulfide is a performance-determining factor for lithium-sulfur batteries. Herein, a novel strategy to synthesize a unique tube-in-tube CNT-wired sulfur-deficient MoS2 nanostructure embedding cobalt atom clusters as an efficient polysulfide regulator is successfully conducted in Li-S batteries. It is confirmed that encapsulating MWCNTs into hollow porous sulfur-deficient MoS2 nanotubes embedded with metal cobalt clusters not only can accelerate electron transport and confine the dissolution of lithium polysulfide by physical/chemical adsorption, but also can catalyze the kinetics of polysulfide redox reactions. Based on DFT calculations, in situ spectroscopic techniques, and various electrochemical studies, catalytic effects of CNT/MoS2 -Co nanocomposite in Li-S battery are deeply investigated for the first time. The CNT/MoS2 -Co composite cathode exhibits a very remarkable rate capability (641 mAh g-1 at 5.0 C) and excellent cycling stability (capacity decay rate of 0.050% per cycle at 5.0 C) even at high sulfur mass loading of 3.6 mg cm-2 . More crucially, CNT/MoS2 -Co tube-in-tube nanostructures present a superior specific capacity of 650 mAh g-1 in a Li-S pouch cell at 0.2 C (4.0 mg cm-2 ).