RESUMO
Combining superconducting resonators and quantum dots has triggered tremendous progress in quantum information, however, attempts at coupling a resonator to even charge parity spin qubits have resulted only in weak spin-photon coupling. Here, we integrate a zincblende InAs nanowire double quantum dot with strong spin-orbit interaction in a magnetic-field resilient, high-quality resonator. The quantum confinement in the nanowire is achieved using deterministically grown wurtzite tunnel barriers. Our experiments on even charge parity states and at large magnetic fields, allow us to identify the relevant spin states and to measure the spin decoherence rates and spin-photon coupling strengths. We find an anti-crossing between the resonator mode in the single photon limit and a singlet-triplet qubit with a spin-photon coupling strength of g/2π = 139 ± 4 MHz. This coherent coupling exceeds the resonator decay rate κ/2π = 19.8 ± 0.2 MHz and the qubit dephasing rate γ/2π = 116 ± 7 MHz, putting our system in the strong coupling regime.
RESUMO
There has been growing interest in telemedicine for cystic fibrosis over recent years based largely on convenience for patients and/or increasing the frequency of surveillance and early detection which, it is assumed, could improve treatment outcomes. During 2020, the covid-19 pandemic catalysed the pace of development of this field, as CF patients were presumed to be at high risk of infection. Most clinics adapted to digital platforms with provision of lung function monitoring and sample collection systems. Here, we present the views of multidisciplinary team members at a large paediatric CF centre on what has worked well and what requires further optimisation in the future. In response to the question posed, 'Do we still need face to face clinics?' our answer is 'Yes, but not every time, and not for everyone'.
Assuntos
Fibrose Cística , Telemedicina , COVID-19 , Criança , Fibrose Cística/diagnóstico , Fibrose Cística/epidemiologia , Fibrose Cística/terapia , Humanos , PandemiasRESUMO
The way results of cystic fibrosis (CF) newborn screening are communicated to parents is critical yet is done differently across the globe. We surveyed parents of 101 children in our tertiary London paediatric centre with a 48% response rate. Parental responses were as follows: 40/42 (95%) said the information could not have been given over the phone and 39/43 (91%) said they wanted both partners present; 27/42 (64%) said it was helpful having the health visitor also present; and 37/40 (92%) felt it was acceptable to wait until the next day for the sweat test. We have reduced the time from first contact to arriving in the home to 2-3 h.Conclusion: We believe that this survey backs up our approach of a home visit by a CF nurse specialist with the family's health visitor to break the news. This is challenging in the current COVID-19 pandemic. What is Known: ⢠Breaking bad news can have a lasting impact on parents when not done the right way. ⢠Giving results of cystic fibrosis (CF) newborn screening is done differently within the UK and around the world. What is New: ⢠Our parental survey revealed that the majority (92%) believed this should be done face to face and not over the telephone. ⢠There was a mixed response to whether the parents should be told the genotype (assuming the CF centre knew), and thus the CF diagnosis before the confirmatory sweat test was carried out.
Assuntos
Atitude Frente a Saúde , Fibrose Cística/diagnóstico , Triagem Neonatal , Pais/psicologia , Relações Profissional-Família , Revelação da Verdade , Pesquisas sobre Atenção à Saúde , Visita Domiciliar , Humanos , Recém-NascidoRESUMO
Emerging theoretical concepts for quantum technologies have driven a continuous search for structures where a quantum state, such as spin, can be manipulated efficiently. Central to many concepts is the ability to control a system by electric and magnetic fields, relying on strong spin-orbit interaction and a large g-factor. Here, we present a mechanism for spin and orbital manipulation using small electric and magnetic fields. By hybridizing specific quantum dot states at two points inside InAs nanowires, nearly perfect quantum rings form. Large and highly anisotropic effective g-factors are observed, explained by a strong orbital contribution. Importantly, we find that the orbital contributions can be efficiently quenched by simply detuning the individual quantum dot levels with an electric field. In this way, we demonstrate not only control of the effective g-factor from 80 to almost 0 for the same charge state, but also electrostatic change of the ground state spin.
RESUMO
Energy consumption is one of the primary considerations in animal locomotion. In swimming locomotion, a number of questions related to swimming energetics of an organism and how the energetic quantities scale with body size remain open, largely due to the difficulties with modeling and measuring the power production and consumption. Based on a comprehensive theoretical framework that incorporates cyclic muscle behavior, structural dynamics and swimming hydrodynamics, we perform extensive computational simulations and show that many of the outstanding problems in swimming energetics can be explained by considering the coupling between hydrodynamics and muscle contraction characteristics, as well as the trade-offs between the conflicting performance goals of sustained swimming speed U and cost of transport COT. Our results lead to three main conclusions: (1) in contrast to previous hypotheses, achieving optimal values of U and COT is independent of producing maximal power or efficiency; (2) muscle efficiency in swimming, in contrast to that in flying or running, decreases with increasing body size, consistent with muscle contraction characteristics; (3) the long-standing problem of two disparate patterns of longitudinal power output distributions in swimming fish can be reconciled by relating the two patterns to U-optimal or COT-optimal swimmers, respectively. We also provide further evidence that the use of tendons in caudal regions is beneficial from an energetic perspective. Our conclusions explain and unify many existing observations and are supported by computational data covering nine orders of magnitude in body size.
Assuntos
Metabolismo Energético/fisiologia , Natação/fisiologia , Animais , Fenômenos Biomecânicos , Tamanho Corporal , Simulação por Computador , Hidrodinâmica , Locomoção , Modelos Biológicos , Contração Muscular/fisiologia , Músculos/fisiologiaRESUMO
Tunneling Field-Effect Transistors (TFET) are one of the most promising candidates for future low-power CMOS applications including mobile and Internet of Things (IoT) products. A vertical gate-all-around (VGAA) architecture with a core shell (C-S) structure is the leading contender to meet CMOS footprint requirements while simultaneously delivering high current drive for high performance specifications and subthreshold swing below the Boltzmann limit for low power operation. In this work, VGAA nanowire GaSb/InAs C-S TFETs are demonstrated experimentally for the first time with key device properties of subthreshold swing S = 40 mV/dec (Vd = 10 mV) and current drive up to 40 µA/wire (Vd = 0.3 V, diameter d = 50 nm) while dimensions including core diameter d, shell thickness and gate length are scaled towards CMOS requirements. The experimental data in conjunction with TCAD modeling reveal interface trap density requirements to reach industry standard off-current specifications.
RESUMO
In measuring the coefficient of variation (CV) of underwater wave-induced sunlight irradiance, the spatial integration of irradiance signals due to the finite aperture size of an irradiance detector usually causes underestimation of the measured variance. Because this spatial integration effect is strongly coupled with ocean wave features, inherent optical properties (IOPs) of water, and atmospheric radiance conditions, direct deconvolution techniques from measured irradiance signals can lead to serious signal-to-noise degradation in a noisy upper ocean. On the other hand, choosing a small detector to guarantee CV accuracy is expensive. We address the intrinsic dependence of the CV on the detector size and choice of optimal detector size for measuring irradiance variability in a turbid ocean environment. We present a new theoretical model to directly obtain the form of the CV of the wave-induced scalar irradiance as the function of the detector size, ocean surface wave parameters, and IOPs of ocean water. The model is derived under the small-angle scattering approximation and the first-order assumption of Snell's law and Fresnel transmission coefficient. We demonstrate the validity and efficacy of the model for weakly roughened Gaussian ocean surface conditions, by comparison with Monte Carlo radiative transfer simulations. The model shows that the CV of wave-induced irradiance reaches an asymptotic with decreasing the detector size, thereby providing an optimal or maximum detector size for given IOP and environmental conditions.
RESUMO
By structuring a luminescent dielectric interface as a relief diffraction grating with nanoscale features, it is possible to control the intensity and direction of the emitted light. The composite structure of the grating is based on a fluorescent dye (Lumogen F RED 305) dispersed in a polymeric matrix (poly(methyl methacrylate)). Measurements demonstrate a significant enhancement of the emitted light for specific directions and wavelengths when the grating interface is compared to nonstructured thin films made of the same material. In particular, the maximum enhancement of photoluminescence for a given pump wavelength is obtained at an angle of incidence that is close to the Rayleigh anomaly condition for the first-order diffracted waves. In this condition, the maximum extinction of incident light is observed. Upon excitation with coherent and monochromatic sources, photoluminescence plots show that the Rayleigh anomalies confine the angular interval of the emitted light. Being the anomalies directly related to the pitch of the diffraction grating, the system can be thus implemented as an optical device whose directional emission can be designed for specific applications. The exploitation of nanoimprinting techniques for the fabrication of the luminescent grating enables production of the device on large areas, paving the way for low-cost lighting and solar applications.
RESUMO
As semiconductor electronics keep shrinking, functionality depends on individual atomic scale surface and interface features that may change as voltages are applied. In this work we demonstrate a novel device platform that allows scanning tunneling microscopy (STM) imaging with atomic scale resolution across a device simultaneously with full electrical operation. The platform presents a significant step forward as it allows STM to be performed everywhere on the device surface and high temperature processing in reactive gases of the complete device. We demonstrate the new method through proof of principle measurements on both InAs and GaAs nanowire devices with variable biases up to 4 V. On InAs nanowires we observe a surprising removal of atomic defects and smoothing of the surface morphology under applied bias, in contrast to the expected increase in defects and electromigration-related failure. As we use only standard fabrication and scanning instrumentation our concept is widely applicable and opens up the possibility of fundamental investigations of device surface reliability as well as new electronic functionality based on restructuring during operation.
RESUMO
The concept of a high-luminance light source based on luminescent conversion of LED light and optical concentration in a transparent phosphor is explained. Experiments on a realized light source show that a luminous flux of 8500 lm and a luminance of 500 cd/mm2 can be attained using 56 pump LEDs at 330 W electrical input power. The measurement results are compared to optical simulations, showing that the experimental optical efficiency is slightly lower than expected. The present status enables applications like mid-segment digital projection using LED technology, whereas the concept is scalable to higher fluxes.
RESUMO
A novel design for a flat panel solar concentrator is presented which is based on a light guide with a grating applied on top that diffracts light into total internal reflection. By combining geometrical and diffractive optics the geometrical concentration ratio is optimized according to the principles of nonimaging optics, while the thickness of the device is minimized due to the use of total internal reflection.
RESUMO
Periodic arrays of metallic nanoparticles can be used to enhance the emission of light in certain directions. We fabricated hexagonal arrays of aluminium nanoparticles combined with thin layers of luminescent material and optimized period (275 nm) and thickness (1500 nm) to obtain sideward directional emission into glass for a wavelength band around 620 nm. The key physics is that the luminescent layer acts as a waveguide, from which light is emitted at preferential angles using diffractive effects. This phenomenon has applications in the field of solid-state lighting, where there is a desire for small, bright and directional sources.
RESUMO
Sensory gating is a neurophysiological measure of inhibition that is characterised by a reduction in the P50 event-related potential to a repeated identical stimulus. The objective of this work was to determine the cognitive mechanisms that relate to the neurological phenomenon of auditory sensory gating. Sixty participants underwent a battery of 10 cognitive tasks, including qualitatively different measures of attentional inhibition, working memory, and fluid intelligence. Participants additionally completed a paired-stimulus paradigm as a measure of auditory sensory gating. A correlational analysis revealed that several tasks correlated significantly with sensory gating. However once fluid intelligence and working memory were accounted for, only a measure of latent inhibition and accuracy scores on the continuous performance task showed significant sensitivity to sensory gating. We conclude that sensory gating reflects the identification of goal-irrelevant information at the encoding (input) stage and the subsequent ability to selectively attend to goal-relevant information based on that previous identification.
Assuntos
Percepção Auditiva/fisiologia , Cognição/fisiologia , Potenciais Evocados Auditivos/fisiologia , Função Executiva/fisiologia , Inibição Neural/fisiologia , Filtro Sensorial/fisiologia , Adulto , Atenção/fisiologia , Eletroencefalografia , Feminino , Humanos , Inibição Psicológica , Masculino , Memória de Curto Prazo/fisiologia , Adulto JovemRESUMO
The effective migration of amoeboid cells requires a fine regulation of cell-substratum adhesion. These entwined processes have been shown to be regulated by a host of biophysical and biochemical cues. Here, we reveal the pivotal role played by calcium-based mechanosensation in the active regulation of adhesion resulting in a high migratory adaptability. Using mechanotactically driven Dictyostelium discoideum amoebae, we uncover the existence of optimal mechanosensitive conditions-corresponding to specific levels of extracellular calcium-for persistent directional migration over physicochemically different substrates. When these optimal mechanosensitive conditions are met, noticeable enhancement in cell migration directionality and speed is achieved, yet with significant differences among the different substrates. In the same narrow range of calcium concentrations that yields optimal cellular mechanosensory activity, we uncovered an absolute minimum in cell-substratum adhesion activity, for all considered substrates, with differences in adhesion strength among them amplified. The blocking of the mechanosensitive ion channels with gadolinium-i.e., the inhibition of the primary mechanosensory apparatus-hampers the active reduction in substrate adhesion, thereby leading to the same undifferentiated and drastically reduced directed migratory response. The adaptive behavioral responses of Dictyostelium cells sensitive to substrates with varying physicochemical properties suggest the possibility of novel surface analyses based on the mechanobiological ability of mechanosensitive and guidable cells to probe substrates at the nanometer-to-micrometer level.
RESUMO
INTRODUCTION: Elastic stable intramedullary nailing (ESIN) has transformed children's femoral shaft fracture treatment, but this technique requires an image intensifier. Without it, open reduction is used to check fracture reduction and pin passage. The aim of this study was to describe our techniques and to evaluate our results at the middle term. HYPOTHESIS: The open reduction and ESIN technique provides satisfactory results with few major complications. PATIENTS AND METHODS: This was a retrospective study that focused on femoral diaphyseal fractures treated in the pediatric surgery unit at Yopougon Teaching Hospital (Abidjan, Côte d'Ivoire) between January 2007 and December 2013. Twenty children older than 6 years of age who underwent open reduction and ESIN without image intensifier assistance were included. Functional outcomes were assessed using Flynn's criteria. Postoperative complications and sequelae were recorded. RESULTS: At the 16-month follow-up, the results were excellent in 11 (55%) cases, good in eight (40%), and poor in one (5%) case. The mean duration of surgery was 71min (range, 57-103 min). The mean time for bone healing was 11.6 weeks (range, 7-15 weeks) and the average time to nail removal was 6 months. Complications included wood infection (n=3), skin irritation (n=3), knee stiffness (n=2), malunion (n=3), scar (n=5), and leg length discrepancy (n=3). DISCUSSION: Open reduction and ESIN yielded satisfactory results with few major complications. This method could be an alternative in low-income countries where the image intensifier is often unavailable. LEVEL OF EVIDENCE: Level IV retrospective study.
Assuntos
Fraturas do Fêmur/cirurgia , Fixação Intramedular de Fraturas/métodos , Criança , Côte d'Ivoire , Países em Desenvolvimento , Feminino , Hospitais de Ensino , Humanos , Masculino , Complicações Pós-Operatórias , Estudos RetrospectivosRESUMO
We develop a new method to analytically obtain the beam spread function (BSF) for light radiative transfer in oceanic environments. The BSF, which is defined as the lateral distribution of the (scalar) irradiance with increasing depth in response to a uni-directional beam emanating from a point source in an infinite ocean, must in general be obtained by solving the three-dimensional (3D) radiative transfer equation (RTE). By taking advantage of the highly forward-peaked scattering property of the ocean particles, we assume, for a narrow beam source, the dependence of radiance on polar angle and azimuthal angle is deliberately separated; only single scattering takes place in the azimuthal direction while multiple scattering still occurs in the polar direction. This assumption enables us to reduce the five-variable 3D RTE to a three-variable two-dimensional (2D) RTE. With this simplification, we apply Fourier spectral method to both spatial and angular variables so that we are able to analytically solve the 2D RTE and obtain the 2D BSF accordingly. Using the relations between 2D and 3D solutions acquired during the process of simplification, we are able to obtain the 3D BSF in explicit form. The 2D and 3D analytical solutions are validated by comparing with Monte Carlo radiative transfer simulations. The 2D analytical BSF agrees excellently with the Monte Carlo result. Despite assumptions of axial symmetry and spike-like azimuthal profile of the radiance in deriving the 3D BSF, the comparisons to numerical simulations are very satisfactory especially for limited optical depths (< O(5)) for single scattering albedo values typical in the ocean. The explicit form of the analytical BSF and the significant gain in computational efficiency (several orders higher) relative to RTE simulations make many forward and inverse problems in ocean optics practical for routine applications.
RESUMO
While shell growth engineering to the atomic scale is important for tailoring semiconductor nanowires with superior properties, a precise knowledge of the surface structure and morphology at different stages of this type of overgrowth has been lacking. We present a systematic scanning tunneling microscopy (STM) study of homoepitaxial shell growth of twinned superlattices in zinc blende InAs nanowires that transforms {111}A/B-type facets to the nonpolar {110}-type. STM imaging along the nanowires provides information on different stages of the shell growth revealing distinct differences in growth dynamics of the crystal facets and surface structures not found in the bulk. While growth of a new surface layer is initiated simultaneously (at the twin plane interface) on the {111}A and {111}B nanofacets, the step flow growth proceeds much faster on {111}A compared to {111}B leading to significant differences in roughness. Further, we observe that the atomic scale structures on the {111}B facet is different from its bulk counterpart and that shell growth on this facet occurs via steps perpendicular to the ⟨112⟩B-type directions.
RESUMO
We consider the inertial range spectrum of capillary wave turbulence. Under the assumptions of weak turbulence, the theoretical surface elevation spectrum scales with wave number k as Iηâ¼k(α), where α=α0=-19/4, energy (density) flux P as P(1/2). The proportional factor C, known as the Kolmogorov constant, has a theoretical value of C=C0=9.85 (we show that this value holds only after a formulation in the original derivation is corrected). The k(-19/4) scaling has been extensively, but not conclusively, tested; the P(1/2) scaling has been investigated experimentally, but until recently remains controversial, while direct confirmation of the value of C0 remains elusive. We conduct a direct numerical investigation implementing the primitive Euler equations. For sufficiently high nonlinearity, the theoretical k^{-19/4} and P(1/2) scalings as well as value of C0 are well recovered by our numerical results. For a given number of numerical modes N, as nonlinearity decreases, the long-time spectra deviate from theoretical predictions with respect to scaling with P, with calculated values of α<α0 and C>C0, all due to finite box effect.
RESUMO
Chemotactic signaling and the associated directed cell migration have been extensively studied owing to their importance in emergent processes of cellular aggregation. In contrast, mechanotactic signaling has been relatively overlooked despite its potential for unique ways to artificially signal cells with the aim to effectively gain control over their motile behavior. The possibility of mimicking cellular mechanotactic signals offers a fascinating novel strategy to achieve targeted cell delivery for in vitro tissue growth if proven to be effective with mammalian cells. Using (i) optimal level of extracellular calcium ([Ca(2+)]ext = 3 mM) we found, (ii) controllable fluid shear stress of low magnitude (σ < 0.5 Pa), and (iii) the ability to swiftly reverse flow direction (within one second), we are able to successfully signal Dictyostelium discoideum amoebae and trigger migratory responses with heretofore unreported control and precision. Specifically, we are able to systematically determine the mechanical input signal required to achieve any predetermined sequences of steps including straightforward motion, reversal and trapping. The mechanotactic cellular trapping is achieved for the first time and is associated with a stalling frequency of 0.06 ~ 0.1 Hz for a reversing direction mechanostimulus, above which the cells are effectively trapped while maintaining a high level of directional sensing. The value of this frequency is very close to the stalling frequency recently reported for chemotactic cell trapping [Meier B, et al. (2011) Proc Natl Acad Sci USA 108:11417-11422], suggesting that the limiting factor may be the slowness of the internal chemically-based motility apparatus.
Assuntos
Movimento Celular , Modelos Biológicos , Transdução de Sinais , Cálcio/metabolismo , Espaço Extracelular/metabolismoRESUMO
BACKGROUND: Outcome data for surgery in paediatric Crohn's disease are limited. We report 10 years' experience at a regional paediatric gastroenterology centre. METHODS: Children undergoing surgery for Crohn's disease (January 2002-December 2012) were identified from an onsite patient register. Patients were followed until transition to adult services. Data were obtained from medical records and are expressed as median (range). RESULTS: Sixty-nine children, aged 13.8 years (6.3-17.0) at diagnosis, were included. 42 were male (61%). Follow-up was 1.8 years (27 days-6 years). Surgery followed diagnosis by 9 months (0 days-7 years). 52 children (75%) received thiopurines and 5 (7%) anti-TNF (tumour necrosis factor) therapy preoperatively. 58 (84%) underwent intra-abdominal surgery (40 right hemicolectomy, 8 stoma formation, 2 subtotal colectomy, 2 small bowel resection, 6 other) and 10 (14%) underwent surgery for perianal disease. The commonest indications for intra-abdominal surgery were stricturing disease 35 (60%) and unresponsive luminal disease 13 (22%). There were 13 (22%) early, and 5 (8.6%) late, complications following intra-abdominal surgery. Nine children had disease relapse, five required further surgery. Height SD scores (SDS) did not increase between diagnosis; -0.5 (-3.4-2.1) and most recent follow up; -0.4 (-3.0-1.1). Body Mass Index (BMI) SDS increased from -1.0 (-6.3-1.5) to -0.3 (-3.3-2.0) (p<0.05). CONCLUSIONS: Surgery was associated with a 22% early complication rate and a 15% risk of relapse. 21% of patients required a second unplanned intra-abdominal procedure. Surgical intervention was associated with an increase in BMI SDS, but not in height SDS.