Mechanochemical Diversity in Block Copolymers.

Covalent polymer chains are known to undergo mechanochemical events when subjected to mechanical forces. Such force-coupled reactions, like C-C bond scission in homopolymers, typically occur in a non-selective manner but with a higher probability at the mid-chain. In contrast, block copolymers (BCPs), composed of two or more chemically distinct chains linked by covalent bonds, have recently been shown to exhibit significantly different mechanochemical reactivities and selectivities. These differences may be attributable to the atypical conformations adopted by their chains, compared to the regular random coil. Beyond individual molecules, when BCPs self-assemble into ordered aggregates in solution, the non-covalent interactions between the chains lead to meaningful acceleration in the activation of embedded force-sensitive motifs. Furthermore, the microphase segregation of BCPs in bulk creates periodically dispersed polydomains, locking the blocks in specific conformations which have also been shown to affect their mechanochemical reactivity, with different morphologies influencing reactivity to varying extents. This review summarizes the studies of mechanochemistry in BCPs over the past two decades, from the molecular level to assemblies, and up to bulk materials.

Facile Mechanophore Integration in Heterogeneous Biologically Derived Materials via "Dip-Conjugation".

Mechanical forces play critical roles in a wide variety of biological processes and diseases, yet measuring them directly at the molecular level remains one of the main challenges of mechanobiology. Here, we show a strategy to "Dip-conjugate" biologically derived materials at the chemical level to mechanophores, force-responsive molecular entities, using Click-chemistry. Contrary to classical prepolymerization mechanophore incorporation, this new protocol leads to detectable mechanochromic response with as low as 5% strain, finally making mechanophores relevant for many biological processes that have previously been inaccessible. Our results demonstrate the ubiquity of the technique with activation in synthetic polymers, carbohydrates, and proteins under mechanical force, with alpaca wool fibers as a key example. These results push the limits for mechanophore use in far more types of polymeric materials in applications ranging from molecular-level force damage detection to direct and quantitative 3D force measurements in mechanobiology.

Ring-opening polymerization of lactide catalyzed using metal-coordinated enzyme-like amino acid assemblies.

Polylactide (PLA), a biocompatible and biodegradable polymer, is widely used in diverse biomedical applications. However, the industry standard for converting lactide into PLA involves toxic tin (Sn)-based catalysts. To mitigate the use of these harmful catalysts, other environmentally benign metal-containing agents for efficient lactide polymerization have been studied, but these alternatives are hindered by complex synthesis processes, reactivity issues, and selectivity limitations. To overcome these shortcomings, we explored the catalytic activity of Cu-(Phe)2 and Zn-(Phe)2 metal-amino acid co-assemblies as potential catalysts of the ring-opening polymerization (ROP) of lactide into PLA. Catalytic activity of the assemblies was monitored at different temperatures and solvents using 1H-NMR spectroscopy to determine the catalytic parameters. Notably, Zn-(Phe)2 achieved >99% conversion of lactide to PLA within 12 h in toluene under reflux conditions and was found to have first-order kinetics, whereas Cu-(Phe)2 exhibited significantly lower catalytic activity. Following Zn-(Phe)2-mediated catalysis, the resulting PLA had an average molecular weight of 128 kDa and a dispersity index of 1.25 as determined by gel permeation chromatography. Taken together, our minimalistic approach expands the realm of metal-amino acid-based supramolecular catalytic nanomaterials useful in the ROP of lactide. This advancement shows promise for the future design of simplified biocatalysts in both industrial and biomedical applications.

Polymer Backbone Chemistry Shapes the Alkaline Stability of Metallopolymer Anion-Exchange Membranes.

Anion-exchange membrane fuel cells and water electrolyzers have garnered significant attention in past years due to their potential role in sustainable and affordable energy conversion and storage. However, the chemical stability of the polymeric anion-exchange membranes (AEMs), the key component in these devices, currently limits their lifespan. Recently, metallopolymers have been proposed as chemically stable alternatives to organic cations, using metal centers as ion transporters. In metallopolymer AEMs, various properties such as alkaline stability, water uptake, flexibility, and performance, are determined by both the metal complex and polymer backbone. Herein we present a systematic study investigating the influence of the polymer backbone chemistry on some of these properties, focusing on the alkaline stability of low-oxophilicity gold metallopolymers. Despite the use of a common N-heterocyclic carbene ligand, upon gold metalation using the same reaction conditions, different polymer backbones end up forming different gold complexes. These findings suggest that polymer chemistry affects the metalation reaction in addition to the other properties relevant to AEM performance.

Mechanochemistry in Block Copolymers: New Scission Site due to Dynamic Phase Separation.

Mechanochemistry can lead to the degradation of the properties of covalent macromolecules. In recent years, numerous functional materials have been developed based on block copolymers (BCPs), however, like homopolymers, their chains could undergo mechanochemical damage during processing, which could have crucial impact on their performance. To investigate the mechanochemical response of BCPs, multiple polymers comprising different ratios of butyl acrylate and methyl methacrylate were prepared with similar degree of polymerization and stressed in solution via ultrasonication. Interestingly, all BCPs, regardless of the amount of the methacrylate monomer, presented a mechanochemistry rate constant similar to that of the methacrylate homopolymer, while a random copolymer reacted like the acrylate homopolymer. Size-exclusion chromatography showed that, in addition to the typical main peak shift towards higher retention times, a different daughter fragment was produced indicating a secondary selective scission site, situated around the covalent connection between the two blocks. Molecular dynamics modeling using acrylate and methacrylate oligomers were carried out and indicated that dynamic phase separation occurs even in a good solvent. Such non-random conformations can explain the faster polymer mechanochemistry. Moreover, the dynamic model for end-to-end chain overstretching supports bond scission which is not necessarily chain-centered.

Semi-Telechelic Polymers from Mechanochemical C─C Bond Activation.

Unstrained C─C bond activation is attained in homopolymers through mechanochemical bond scission followed by functionalization to yield mostly semi-telechelic polymer chains. Ball milling poly(ethylene oxide) (PEO) in the presence of 1-(bromoacetyl)pyrene (BAPy) yields the pyrene terminated PEO. Similarly, milling with 2,4'-dibromoacetophenone followed by Suzuki coupling allows the introduction of various aryl end groups. PEOs with a molecular weight below 20 kDa show no functionalization, supporting a mechanochemical mechanism. The protocol is also tested with doxorubicin, yielding the drug-polymer conjugate. PEO halogenation is also demonstrated by milling PEO with iodine, N-bromosuccinimide, or N-iodosuccinimide, which can then be reacted with an amine substituted anthracene. Grinding additional carbon polymers with BAPy indicates that this functionalization method is general for different polymer chemistries.

Extreme Monovalent Ion Selectivity Via Capacitive Ion Exchange.

Capacitive deionization (CDI) is an emerging technology applied to brackish water desalination and ion selective separations. A typical CDI cell consists of two microporous carbon electrodes, where ions are stored in charged micropore via electrosorption into electric double layers. For typical feed waters containing mixtures of several cations and anions, some of which are polluting, models are needed to guide cell design for a target separation, given the complex electrosorption dynamics of each species. An emerging application for CDI is brackish water treatment for direct agricultural use, for which it is often important to selectively electrosorb monovalent Na+ cations over divalent Ca2+ and Mg2+ cations. Recently, it was demonstrated that utilizing constant-voltage CDI cell charging with sulfonated cathodes and short charging times enabled monovalent-selective separations. Here, we utilize a one-dimensional transient CDI model for a flow-through electrode CDI cell to elucidate the mechanisms enabling such separations. We report the discovery that an asymmetric CDI cell with a chemically functionalized cathode induces electric charges in the pristine anode at 0 V cell voltage, which has important implications for monovalent cation selectivity. Leveraging our mechanistic understanding, with our model we uncover a novel operational regime we term "capacitive ion exchange", where the concentration of one ion species increases while competing species concentration decreases. This regime enables resin-less exchange of monovalent cations for divalent cations, with chemical-free electrical regeneration.

Alkaline Stability of Anion-Exchange Membranes.

Recently, the development of durable anion-exchange membrane fuel cells (AEMFCs) has increased in intensity due to their potential to use low-cost, sustainable components. However, the decomposition of the quaternary ammonium (QA) cationic groups in the anion-exchange membranes (AEMs) during cell operation is still a major challenge. Many different QA types and functionalized polymers have been proposed that achieve high AEM stabilities in strongly alkaline aqueous solutions. We previously developed an ex situ technique to measure AEM alkaline stabilities in an environment that simulates the low-hydration conditions in an operating AEMFC. However, this method required the AEMs to be soluble in DMSO solvent, so decomposition could be monitored using 1H nuclear magnetic resonance (NMR). We now report the extension of this ex situ protocol to spectroscopically measure the alkaline stability of insoluble AEMs. The stability ofradiation-grafted (RG) poly(ethylene-co-tetrafluoroethylene)-(ETFE)-based poly(vinylbenzyltrimethylammonium) (ETFE-TMA) and poly(vinylbenzyltriethylammonium) (ETFE-TEA) AEMs were studied using Raman spectroscopy alongside changes in their true OH- conductivities and ion-exchange capacities (IEC). A crosslinked polymer made from poly(styrene-co-vinylbenzyl chloride) random copolymer and N,N,N',N'-tetraethyl-1,3-propanediamine (TEPDA) was also studied. The results are consistent with our previous studies based on QA-type model small molecules and soluble poly(2,6-dimethylphenylene oxide) (PPO) polymers. Our work presents a reliable ex situ technique to measure the true alkaline stability of AEMs for fuel cells and water electrolyzers.

Off-center Mechanophore Activation in Block Copolymers.

Block copolymers (BCPs) are used in numerous applications in modern materials science. Yet, like homopolymers, BCPs can undergo covalent bond scission when mechanically stressed (mechanochemistry), which could lead to unexpected consequences in such applications. BCPs' heterogeneity may affect force transduction, perhaps changing force distribution and localization. To verify this, a gem-dichlorocyclopropane (gDCC) embedded linear chain is prepared and extended with a poly(methyl methacrylate) block. When stressed in solution, the mechanochemical ring-opening of gDCC is accelerated compared to homopolymers, even though the mechanophores are at the chain ends. Moreover, a higher mechanophore activation selectivity is obtained. These results indicate that mechanochemical response outside, and even far from the chain center is quite prominent in BCPs, and that forces along the polymer chain can efficiently activate multi-mechanophores regions, even when far from the polymer midchain.

Prolonged in situ self-healing in structural composites via thermo-reversible entanglement.

Natural processes continuously degrade a material's performance throughout its life cycle. An emerging class of synthetic self-healing polymers and composites possess property-retaining functions with the promise of longer lifetimes. But sustained in-service repair of structural fiber-reinforced composites remains unfulfilled due to material heterogeneity and thermodynamic barriers in commonly cross-linked polymer-matrix constituents. Overcoming these inherent challenges for mechanical self-recovery is vital to extend in-service operation and attain widespread adoption of such bioinspired structural materials. Here we transcend existing obstacles and report a fiber-composite capable of minute-scale and prolonged in situ healing - 100 cycles: an order of magnitude higher than prior studies. By 3D printing a mendable thermoplastic onto woven glass/carbon fiber reinforcement and co-laminating with electrically resistive heater interlayers, we achieve in situ thermal remending of internal delamination via dynamic bond re-association. Full fracture recovery occurs below the glass-transition temperature of the thermoset epoxy-matrix composite, thus preserving stiffness during and after repair. A discovery of chemically driven improvement in thermal remending of glass- over carbon-fiber composites is also revealed. The marked lifetime extension offered by this self-healing strategy mitigates costly maintenance, facilitates repair of difficult-to-access structures (e.g., wind-turbine blades), and reduces part replacement, thereby benefiting economy and environment.

Hydroxide Chemoselectivity Changes with Water Microsolvation.

Solvent molecules are known to affect chemical reactions, especially if they interact with one or more of the reactants or catalysts. In ion microsolvation, i.e., solvent molecules in the first solvation sphere, strong electronic interactions are created, leading to significant changes in charge distribution and consequently on their nucleophilicity/electrophilicity and acidity/basicity. Despite a long history of research in the field, fundamental issues regarding the effects of ion microsolvation are still open, especially in the condensed phase. Using reactions between hydroxide and relatively stable quaternary ammonium salts as an example, we show that water microsolvation can change hydroxide's chemoselectivity by differently affecting its basicity and nucleophilicity. In this example, the hydroxide reactivity as a nucleophile is less affected by water microsolvation than its reactivity as a base. These disparities are discussed by calculating and comparing oxidation potentials and polarizabilities of the different water-hydroxide clusters.

Spin-induced asymmetry reaction-The formation of asymmetric carbon by electropolymerization.

We describe the spin polarization-induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

Accelerated Mechanochemistry in Helical Polymers.

Polymer chains, if long enough, are known to undergo bond scission when mechanically stressed. While the mechanochemical response of random coils is well understood, biopolymers and some key synthetic chains adopt well-defined secondary structures such as helices. To understand covalent mechanochemistry in such structures, poly(γ-benzyl glutamates) are prepared while regulating the feed-monomer chirality, producing chains with similar molecular weights and backbone chemistry but different helicities. Such chains are stressed in solution and their mechanochemistry rates compared by following molecular weight change and using a rhodamine mechanochromophore. Results reveal that while helicity itself is not affected by the covalent bond scissions, chains with higher helicity undergo faster mechanochemistry. Considering that the polymers tested differ only in conformation, these results indicate that helix-induced chain rigidity improves the efficiency of mechanical energy transduction.

Alkaline Stability of Low Oxophilicity Metallopolymer Anion-Exchange Membranes.

Anion-exchange membrane fuel cells (AEMFCs) are promising energy conversion devices due to their high efficiency. Nonetheless, AEMFC operation time is currently limited by the low chemical stability of their polymeric anion-exchange membranes. In recent years, metallopolymers, where the metal centers assume the ion transport function, have been proposed as a chemically stable alternative. Here we present a systematic study using a polymer backbone with side-chain N-heterocyclic carbene (NHC) ligands complexed to various metals with low oxophilicity, such as copper, zinc, nickel, and gold. The golden metallopolymer, using the metal with the lowest oxophilicity, demonstrates exceptional alkaline stability, far superior to state-of-the-art quaternary ammonium cations, as well as good in situ AEMFC results. These results demonstrate that judiciously designed metallopolymers may be superior to purely organic membranes and provides a scientific base for further developments in the field.

Isoindolinium Groups as Stable Anion Conductors for Anion-Exchange Membrane Fuel Cells and Electrolyzers.

Anion-exchange membrane (AEM) fuel cells (AEMFCs) and water electrolyzers (AEMWEs) have gained strong attention of the scientific community as an alternative to expensive mainstream fuel cell and electrolysis technologies. However, in the high pH environment of the AEMFCs and AEMWEs, especially at low hydration levels, the molecular structure of most anion-conducting polymers breaks down because of the strong reactivity of the hydroxide anions with the quaternary ammonium (QA) cation functional groups that are commonly used in the AEMs and ionomers. Therefore, new highly stable QAs are needed to withstand the strong alkaline environment of these electrochemical devices. In this study, a series of isoindolinium salts with different substituents is prepared and investigated for their stability under dry alkaline conditions. We show that by modifying isoindolinium salts, steric effects could be added to change the degradation kinetics and impart significant improvement in the alkaline stability, reaching an order of magnitude improvement when all the aromatic positions are substituted. Density functional theory (DFT) calculations are provided in support of the high kinetic stability found in these substituted isoindolinium salts. This is the first time that this class of QAs has been investigated. We believe that these novel isoindolinium groups can be a good alternative in the chemical design of AEMs to overcome material stability challenges in advanced electrochemical systems.

Ligand Valency Effects on the Alkaline Stability of Metallopolymer Anion-Exchange Membranes.

Long-term stability is a key requirement for anion-exchange membranes (AEMs) for alkaline fuel cells and electrolyzers that is yet to be fulfilled. Different cationic chemistries are being exploited to reach such a goal, and metallopolymers present the unique advantage of chemical stability towards strong nucleophiles as compared to organic cations. Yet, the few metallopolymers tested in strongly alkaline conditions or even in fuel cells still degrade. Therefore, fundamental studies can be advantageous in directing future developments towards this goal. Here, a systematic study of the effect of ligand valency is presented, using nickel-based metallopolymers on polynorbornene backbones, functionalized with multidentate pyridine ligands. Metallopolymers using a single ligand type as well as all the possible mixtures are prepared and their relative stability towards aggressive alkaline conditions compared. Metallopolymer in which nickel ions are hexacoordinated with two tridentate ligands demonstrates superior stability. More importantly, by comparing all the metallopolymers' stability, the reason behind such relative stability provides design parameters for novel metallopolymer AEMs.

Template-Free Formation of Regular Macroporosity in Carbon Materials Made from a Folded Polymer Precursor.

Porous carbon materials attract great interest in a wide range of applications such as batteries, fuel cells, and membranes, due to their large surface area, structural and compositional tunability, and chemical stability. While micropores are typically obtained when preparing carbon materials by pyrolysis, the fabrication of mesoporous, and especially macroporous carbons is more challenging, yet important for enhancing mass transport. Herein, template-free regular macroporous carbons are prepared from a mixture of unfolded (linear) and folded (single-chain nanoparticles, SCNP) polyvinylpyrrolidone chains. While having the same chemical composition, the different molecular architectures lead to phase separation even before pyrolysis, creating a dense cell architecture, which is retained upon carbonization. Upon increasing the SCNP content, the homogeneity of the pore network increases and the specific surface area is enlarged 3-5-fold, until ideal properties are obtained at 75% SCNP, as observed by high-resolution scanning electron microscopy and N2 physisorption porosimetry. The materials are further investigated as hydrazine oxidation electrocatalysts, demonstrating the link between the evolving morphology and current density. Importantly, this study demonstrates the role of polymer architecture in macroporosity templating in carbon materials, providing a new approach to develop complex carbon architectures without the need for external templating.

Flow Photochemistry for Single-Chain Polymer Nanoparticle Synthesis.

Single chain polymer nanoparticles (SCNP) are an attractive polymer architecture that provides functions seen in folded biomacromolecules. The generation of SCNPs, however, is limited by the requirement of a high dilution chemical step, necessitating the use of large reactors to produce processable quantities of material. Herein, the chemical folding of macromolecules into SCNPs is achieved in both batch and flow photochemical processes by the previously described photodimerization of anthracene units in polymethylmethacrylate (100 kDa) under UV irradiation at 366 nm. When employing flow chemistry, the irradiation time is readily controlled by tuning the flow rates, allowing for the precise control over the intramolecular collapse process. The flow system provides a route at least four times more efficient for SCNP formation, reaching higher intramolecular cross-linking ratios five times faster than batch operation.

Increasing the Alkaline Stability of N,N-Diaryl Carbazolium Salts Using Substituent Electronic Effects.

Anion-exchange membrane fuel cells (AEMFCs) have attracted the attention of the scientific community during the past years, mostly because of the potential for eliminating the need for using costly platinum catalysts in the cells. However, the broad commercialization of AEMFCs is hampered by the low chemical stability of the cationic functional groups in the anion-conducting membranes required for the transportation of hydroxide ions in the cell. Improving the stability of these groups is directly connected with the ability to recognize the different mechanisms of the OH- attack. In this work, we have synthesized eight different carbazolium cationic model molecules and investigated their alkaline stability as a function of their electronic substituent properties. Given that N,N-diaryl carbazolium salts decompose through a single-electron-transfer mechanism, the change in carbazolium electron density leads to a very significant impact on their chemical stability. Substituents with very negative Hammett parameters demonstrate unparalleled stability toward dry hydroxide. This study provides guidelines for a different approach to develop stable quaternary ammonium salts for AEMFCs, making use of the unique parameters of this decomposition mechanism.