RESUMO
In the presence of water, the electrically conductive metal-organic framework (MOF) Cu3HHTT2 (H6HHTT = 2,3,7,8,12,13-hexahydroxy-4b1,5,10,15-tetraazanaphtho[1,2,3-gh]tetraphene) provides a conduit for proton transport, thereby becoming a dual ionic-electronic conductor. Owing to its dual conducting nature and its high density of imine and open metal sites, the MOF operates as a particularly sensitive chemiresistor, whose sensing mechanism changes with relative humidity. Thus, the interaction of NH3 gas with the MOF under low humidity promotes proton transport, which translates to high sensitivity for ammonia detection. Conversely, NO2 gas hinders proton conductivity, even under high relative humidity conditions, leading to large resistance variations in the humid regime. This dual ionic-electronic conduction-based gas sensor provides superior sensitivity compared to other conventional chemiresistors under similar conditions and highlights its potential as a platform for room-temperature gas sensors.
RESUMO
Two-dimensional conductive metal-organic frameworks (2D cMOFs) are an emerging class of crystalline van der Waals layered materials with tunable porosity and high electrical conductivity. They have been used in a variety of applications, such as energy storage and conversion, chemiresistive sensing, and quantum information. Although designing new conductive 2D cMOFs and studying their composition/structure-property relationships have attracted significant attention, there are still very few examples of 2D cMOFs that exhibit room-temperature electrical conductivity above 1 S cm-1, the value exhibited by activated carbon, a well-known porous and conductive material that serves in myriad applications. When such high conductivities are achieved, Ni-diamine linkages are often involved, yet Ni-diamine MOFs remain difficult to access. Here, we report two new 2D cMOFs made through ortho-diamine connections: M3(HITT)2 (M = Ni, Cu; HITT = 2,3,7,8,12,13-hexaiminotetraazanaphthotetraphene). The electrical conductivity of Ni3(HITT)2 reaches 4.5 S cm-1 at 298 K, whereas the conductivity of Cu3(HITT)2 spans from 0.05 (2Cu+Cu2+) to 10-6 (3Cu2+) upon air oxidation, much lower than that of Ni3(HITT)2. Spectroscopic analysis reveals that Ni3(HITT)2 exhibits significantly stronger in-plane π-d conjugation and higher density of charge carriers compared to Cu3(HITT)2, accounting for the higher electrical conductivity of Ni3(HITT)2. Cu2+/Cu+ mixed valency modulates the energy level and carrier density of Cu3(HITT)2, allowing for a variation of electrical conductivity over 4 orders of magnitude. This work provides a deeper understanding of the influence of metal nodes on electrical conductivity and confirms ortho-diamine linkers as privileged among ligands for 2D cMOFs.
RESUMO
Metal-organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single-use detection. A hybridization strategy is demonstrated synergistically deploying conductive MOFs (cMOFs) and conductive polymers (cPs) as two complementary mixed ionic-electronic conductors in high-performing stand-alone chemiresistors. This work presents significant improvement in i) sensor recovery kinetics, ii) cycling stability, and iii) dynamic range at room temperature. The effect of hybridization across well-studied cMOFs is demonstrated based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) and 2,3,6,7,10,11-hexaiminotriphenylene (HITP) ligands with varied metal nodes (Co, Cu, Ni). A comprehensive mechanistic study is conducted to relate energy band alignments at the heterojunctions between the MOFs and the polymer with sensing thermodynamics and binding kinetics. The findings reveal that hole enrichment of the cMOF component upon hybridization leads to selective enhancement in desorption kinetics, enabling significantly improved sensor recovery at room temperature, and thus long-term response retention. This mechanism is further supported by density functional theory calculations on sorbate-analyte interactions. It is also found that alloying cPs and cMOFs enables facile thin film co-processing and device integration, potentially unlocking the use of these hybrid conductors in diverse electronic applications.
RESUMO
Electrically conductive metal-organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double-layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure-function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene-based 2D layered conductive MOFs with variable alkyl functional groups, Ni3(HIR3-TAT)2 (TAT=triazatruxene; R=H, Et, n-Bu, n-Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in-plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double-layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni3(HIH3-TAT)2 to Ni3(HIBu3-TAT)2. Partial exfoliation of Ni3(HIBu3-TAT)2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox-active sites may motivate further design and engineering of electrode materials for EC.
RESUMO
Two-dimensional electrically conducting metal-organic frameworks (2D-e-MOFs) have emerged as a class of highly promising functional materials for a wide range of applications. However, despite the significant recent advances in 2D-e-MOFs, developing systems that can be postsynthetically chemically functionalized, while also allowing fine-tuning of the transport properties, remains challenging. Herein, we report two isostructural 2D-e-MOFs: Ni3(HITAT)2 and Ni3(HITBim)2 based on two new 3-fold symmetric ligands: 2,3,7,8,12,13-hexaaminotriazatruxene (HATAT) and 2,3,8,9,14,15-hexaaminotribenzimidazole (HATBim), respectively, with reactive sites for postfunctionalization. Ni3(HITAT)2 and Ni3(HITBim)2 exhibit temperature-activated charge transport, with bulk conductivity values of 44 and 0.5 mS cm-1, respectively. Density functional theory analysis attributes the difference to disparities in the electron density distribution within the parent ligands: nitrogen-rich HATBim exhibits localized electron density and a notably lower lowest unoccupied molecular orbital (LUMO) energy relative to HATAT. Precise amounts of methanesulfonyl groups are covalently bonded to the N-H indole moiety within the Ni3(HITAT)2 framework, modulating the electrical conductivity by a factor of â¼20. These results provide a blueprint for the design of porous functional materials with tunable chemical functionality and electrical response.
RESUMO
Materials capable of selectively adsorbing or releasing water can enable valuable applications ranging from efficient humidity and temperature control to the direct atmospheric capture of potable water. Despite recent progress in employing metal-organic frameworks (MOFs) as privileged water sorbents, developing a readily accessible, water-stable MOF platform that can be systematically modified for high water uptake at low relative humidity remains a significant challenge. We herein report the development of a tunable MOF that efficiently captures atmospheric water (up to 0.78 g water/g MOF) across a range of uptake humidity (27-45%) employing a readily accessible Zn bibenzotriazolate MOF, CFA-1 ([Zn5(OAc)4(bibta)3], H2bibta = 1H,1H'-5,5'-bibenzo[d][1,2,3]triazole), as a base for subsequent diversification. Controlling the metal identity (zinc, nickel) and coordinating nonstructural anion (acetate, chloride) via postsynthetic exchange modulates the relative humidity of uptake, facilitating the use of a single MOF scaffold for a diverse range of potential water sorption applications. We further present a fundamental theory dictating how continuous variation of the pore environment affects the relative humidity of uptake. Exchange of substituents preserves capacity for water sorption, increases hydrolytic stability (with 5.7% loss in working capacity over 450 water adsorption-desorption cycles for the nickel-chloride-rich framework), and enables continuous modulation for the relative humidity of pore condensation. This combination of stability and tunability within a synthetically accessible framework renders Ni-incorporated M5X4bibta3 promising materials for practical water sorption applications.
RESUMO
We describe the synthesis and properties of Zn3[(Zn4Cl)3(BTT)8]2 (ZnZnBTT, BTT3- = 1,3,5-benzenetristetrazolate), a heretofore unknown member of a well-known, extensive family of metal-organic frameworks (MOFs) with the general formula MII3[(MII4Cl)3(BTT)8]2, which adopts an anionic, sodalite-like structure. As with previous members in this family, ZnZnBTT presents two crystallographically distinct metal cations: a skeletal Zn2+ site, fixed within Zn4Cl(tetrazole)8 secondary building units (SBUs), and a charge-balancing Zn2+ site. Self-assembly of ZnZnBTT from its building blocks has remained elusive; instead, we show that ZnZnBTT is readily accessed by quantitative postsynthetic exchange of all Mn2+ ions in MnMnBTT with zinc. We further demonstrate that ZnZnBTT is a promising Zn-ion conductor owing to the mobile charge-balancing extra-framework Zn2+ cations. The new material displays a Zn-ion conductivity of σ = 1.15 × 10-4 S/cm at room temperature and a relatively low activation energy of Ea = 0.317 eV, enabling potential applications in the emerging field of quasi-solid-state zinc-ion batteries.
RESUMO
Tailoring the molecular components of hybrid organic-inorganic materials enables precise control over their electronic properties. Designing electrically conductive coordination materials, e.g. metal-organic frameworks (MOFs), has relied on single-metal nodes because the metal-oxo clusters present in the vast majority of MOFs are not suitable for electrical conduction due to their localized electron orbitals. Therefore, the development of metal-cluster nodes with delocalized bonding would greatly expand the structural and electrochemical tunability of conductive materials. Whereas the cuboidal [Fe4S4] cluster is a ubiquitous cofactor for electron transport in biological systems, few electrically conductive artificial materials employ the [Fe4S4] cluster as a building unit due to the lack of suitable bridging linkers. In this work, we bridge the [Fe4S4] clusters with ditopic N-heterocyclic carbene (NHC) linkers through charge-delocalized Fe-C bonds that enhance electronic communication between the clusters. [Fe4S4Cl2(ditopic NHC)] exhibits a high electrical conductivity of 1 mS cm-1 at 25 °C, surpassing the conductivity of related but less covalent materials. These results highlight that synthetic control over individual bonds is critical to the design of long-range behavior in semiconductors.
RESUMO
We present a thermally stable, mechanically compliant, and sensitive polymer-based NO2 gas sensor design. Interconnected nanoscale morphology driven from spinodal decomposition between conjugated polymers tethered with polar side chains and thermally stable matrix polymers offers judicious design of NO2-sensitive and thermally tolerant thin films. The resulting chemiresitive sensors exhibit stable NO2 sensing even at 170 °C over 6 h. Controlling the density of polar side chains along conjugated polymer backbone enables optimal design for coupling high NO2 sensitivity, selectivity, and thermal stability of polymer sensors. Lastly, thermally stable films are used to implement chemiresistive sensors onto flexible and heat-resistant substrates and demonstrate a reliable gas sensing response even after 500 bending cycles at 170 °C. Such unprecedented sensor performance as well as environmental stability are promising for real-time monitoring of gas emission from vehicles and industrial chemical processes.
Assuntos
Temperatura Alta , Dióxido de Nitrogênio , PolímerosRESUMO
The interaction between excitons and photons underlies a range of emergent technologies, such as directional light emission, molecular lasers, photonic circuits, and polaritonic devices. Two of the key parameters that impact exciton-photon coupling are the binding energy of excitons and the relative orientations between the exciton dipole and photon field. Tightly bound excitons are typically found in molecular crystals, where nevertheless the angular relationship of excitons with photon fields is difficult to control. Here, we demonstrate directional exciton dipoles and photon fields, anchored by metal-ligand coordination. In a pyrene-porphyrin bichromophoric metal-organic framework (MOF), we observe that the perpendicular arrangement of the pyrene- and porphyrin-based exciton dipoles engenders orthogonal polarizations of their respective emissions. The alignment of the directional exciton and photon fields gives rise to an anisotropic waveguide effect, where the pyrene- and the porphyrin-based emissions show distinct spatial distribution within microplate-shaped MOF crystals. This capability to simultaneously host heterogenous excitonic states and anisotropic photon fields points toward MOFs' yet-to-be-realized potential as a platform for advancing the frontier in the field of exciton-photonics, which centers around engineering emergent properties from the interplay between excitons and photons.
RESUMO
The scission of the O-O bond in O2 during respiration and the formation of the O-O bond during photosynthesis are the engines of aerobic life. Likewise, the reduction of O2 and the oxidation of reduced oxygen species to form O2 are indispensable components for emerging renewable technologies, including energy storage and conversion, yet discrete molecule-like systems that promote these fundamental reactions are rare. Herein, we report a square-planar tetramanganese cluster formed by self-assembly within a metal-organic framework that reversibly reduces O2 by four electrons, facilitating the interconversion between molecular O2 and metal-oxo species. The tetranuclear cluster spontaneously cleaves the O-O bond of O2 at room temperature to generate a tetramanganese-bis(µ2-oxo) species, which, in turn, is competent for O-O bond reformation and O2 evolution at elevated temperatures, enabled by the head-to-head orientation of two oxo species. This study demonstrates the viability of four-electron interconversion between molecular O2 and metal-oxo species and highlights the importance of site isolation for achieving multi-electron chemistry at polynuclear metal clusters.
RESUMO
Selectively blocking undesirable exciton transfer pathways is crucial for utilizing exciton conversion processes that involve participation of multiple chromophores. This is particularly challenging for solid-state systems, where the chromophores are fixed in close proximity. For instance, the low efficiency of solid-state triplet-triplet upconversion calls for inhibiting the parasitic singlet back-transfer without blocking the flow of triplet excitons. Here, we present a reticular chemistry strategy that inhibits the resonance energy transfer of singlet excitons. Within a pillared layer metal-organic framework (MOF), pyrene-based singlet donors are situated perpendicular to porphyrin-based acceptors. High resolution transmission electron microscopy and electron diffraction enable direct visualization of the structural relationship between donor and acceptor (D-A) chromophores within the MOF. Time-resolved photoluminescence measurements reveal that the structural and symmetry features of the MOF reduce the donor-to-acceptor singlet transfer efficiency to less than 36% compared to around 96% in the control sample, where the relative orientation of the donor and acceptor chromophores cannot be controlled.
RESUMO
Recent advancements in quantum sensing have sparked transformative detection technologies with high sensitivity, precision, and spatial resolution. Owing to their atomic-level tunability, molecular qubits and ensembles thereof are promising candidates for sensing chemical analytes. Here, we show quantum sensing of lithium ions in solution at room temperature with an ensemble of organic radicals integrated in a microporous metal-organic framework (MOF). The organic radicals exhibit electron spin coherence and microwave addressability at room temperature, thus behaving as qubits. The high surface area of the MOF promotes accessibility of the guest analytes to the organic qubits, enabling unambiguous identification of lithium ions and quantitative measurement of their concentration through relaxometric and hyperfine spectroscopic methods based on electron paramagnetic resonance (EPR) spectroscopy. The sensing principle presented in this work is applicable to other metal ions with nonzero nuclear spin.
RESUMO
Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.
Assuntos
Estruturas Metalorgânicas , Polímeros/químicaRESUMO
Metal-organic frameworks (MOFs) are hybrid materials known for their nanoscale pores, which give them high surface areas but generally lead to poor electrical conductivity. Recently, MOFs with high electrical conductivity were established as promising materials for a variety of applications in energy storage and catalysis. Many recent reports investigating the fundamentals of charge transport in these materials focus on the role of the organic ligands. Less consideration, however, is given to the metal ion forming the MOF, which is almost exclusively a late first-row transition metal. Here, we report a moderately conductive porous MOF based on trivalent gallium and 2,3,6,7,10,11-hexahydroxytriphenylene. Gallium, a metal that has not been featured in electrically conductive MOFs so far, has a closed-shell electronic configuration and is present in its trivalent state-in contrast to most conductive MOFs, which are formed by open-shell, divalent transition metals. Our material, made without using any harmful solvents, displays conductivities on the level of 3 mS/cm and a surface area of 196 m2 /g, comparable to transition metal analogs.
RESUMO
Dynamic nuclear polarization (DNP) is an NMR sensitivity enhancement technique that mediates polarization transfer from unpaired electrons to NMR-active nuclei. Despite its success in elucidating important structural information on biological and inorganic materials, the detailed polarization-transfer pathway from the electrons to the nearby and then the bulk solvent nuclei, and finally to the molecules of interest-remains unclear. In particular, the nuclei in the paramagnetic polarizing agent play significant roles in relaying the enhanced NMR polarizations to more remote nuclei. Despite their importance, the direct NMR observation of these nuclei is challenging because of poor sensitivity. Here, we show that a combined DNP and electron decoupling approach can facilitate direct NMR detection of these nuclei. We achieved an â¼80 % improvement in NMR intensity via electron decoupling at 0.35â T and 80â K on trityl radicals. Moreover, we recorded a DNP enhancement factor of ϵ ${\varepsilon{} }$ â¼90 and â¼11 % higher NMR intensity using electron decoupling on paramagnetic metal-organic framework, magnesium hexaoxytriphenylene (MgHOTP MOF).
Assuntos
ElétronsRESUMO
We report a metal-organic framework (MOF) with a rare two-dimensional (2D) secondary building unit (SBU). The SBU comprises mixed-valent Fe2+ and Fe3+ metal ions bridged by oxygen atoms pertaining to the polytopic ligand 3,3',4,4',5,5'-hexahydroxybiphenyl, which also define the iron-oxide 2D layers. Overall, the anionic framework exhibits rare topology and evidences strong electronic communication between the mixed-valence iron sites. These results highlight the importance of dimensionality control of MOF SBUs for discovering new topologies in reticular chemistry, and especially for improving electronic communication within the MOF skeleton.
RESUMO
Metallic charge transport and porosity appear almost mutually exclusive. Whereas metals demand large numbers of free carriers and must have minimal impurities and lattice vibrations to avoid charge scattering, the voids in porous materials limit the carrier concentration, provide ample space for impurities, and create more charge-scattering vibrations due to the size and flexibility of the lattice. No microporous material has been conclusively shown to behave as a metal. Here, we demonstrate that single crystals of the porous metal-organic framework Ln1.5(2,3,6,7,10,11-hexaoxytriphenylene) (Ln = La, Nd) are metallic. The materials display the highest room-temperature conductivities of all porous materials, reaching values above 1,000 S/cm. Single crystals of the compounds additionally show clear temperature-deactivated charge transport, a hallmark of a metallic material. Lastly, a structural transition consistent with charge density wave ordering, present only in metals and rare in any materials, provides additional conclusive proof of the metallic nature of the materials. Our results provide an example of a metal with porosity intrinsic to its structure. We anticipate that the combination of porosity and chemical tunability that these materials possess will provide a unique handle toward controlling the unconventional states that lie within them, such as charge density waves that we observed, or perhaps superconductivity.
RESUMO
Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.
Assuntos
Reprodutibilidade dos Testes , Adsorção , PorosidadeRESUMO
Reaction of 2,3,6,7,10,11-hexaaminotriphenylene hexahydrochloride (HATP·6HCl) and (TpPhNi)Cl (TpPh = tris(3,5-diphenyl-1-pyrazolyl)borate) produces the radical-bridged trinickel complex [(TpPhNi)3(HITP)] (HITP3-Ë = 2,3,6,7,10,11-hexaiminotriphenylene). Magnetic measurements and broken-symmetry density functional theory calculations reveal strong exchange coupling persisting at room temperature between HITP3-Ë and two of the three Ni2+ centers, a rare example of strong radical-mediated magnetic coupling in multimetallic complexes. These results demonstrate the potential of radical-bearing tritopic HITP ligands as building blocks for extended molecule-based magnetic materials.