RESUMO
An innovative salamo-like fluorescent chemical sensor H2L, has been prepared that can be utilized to selectively detect Cu2+ and B4O72- ions. Cu2+ ions can bind to oxime state nitrogen and phenol state oxygen atoms in the chemosensor H2L, triggering the LMCT effect leading to fluorescence enhancement. The crystal structure of the copper(II) complex, named as [Cu(L)], has been achieved via X-ray crystallography, and the sensing mechanism has been confirmed by further theoretical calculations with DFT. Besides, the sensor H2L recognizes B4O72- ions causing an ICT effect resulting in bright blue fluorescence. Moreover, the sensor has relatively high selectivity and sensitivity for Cu2+ and B4O72- ions, and the detection limits are 1.02 × 10-7 and 2.06 × 10-7 M, respectively. In addition, the good biocompatibility and excellent water solubility of the sensor H2L make it very advantageous in practical applications, using H2L powder for fingerprint visualization, using H2L to identify the phenomenon of B4O72- ions emitting bright blue fluorescence, making it an ink that can print encrypted messages on A4 paper, in addition to this, based on H2L, the real water sample was tested for Cu2+ ion recognition, and finally the test strip experiment was carried out.
RESUMO
Charge transport of conjugated polymers in functional devices closely relates to their density of states (DOS) distributions. However, systemic DOS engineering for conjugated polymers is challenging due to the lack of modulated methods and the unclear relationship between DOS and electrical properties. Here, the DOS distribution of conjugated polymers is engineered to enhance their electrical performances. The DOS distributions of polymer films are tailored using three processing solvents with different Hansen solubility parameters. The highest n-type electrical conductivity (39 ± 3 S cm-1 ), the highest power factor (63 ± 11 µW m-1 K-2 ), and the highest Hall mobility (0.14 ± 0.02 cm2 V-1 s-1 ) of the polymer (FBDPPV-OEG) are obtained in three films with three various DOS distributions, respectively. Through theoretical and experimental exploration, it is revealed that the carrier concentration and transport property of conjugated polymers can be efficiently controlled by DOS engineering, paving the way for rationally fabricating organic semiconductors.
RESUMO
Strong interchain interactions of conjugated polymers usually result in poor miscibility with molecular dopants, limiting the doping efficiency because of uncontrolled phase separation. We have developed a strategy to achieve efficient charge-transport and high doping miscibility in n-doped conjugated polymers. We solve the miscibility issue through disorder side-chains containing dopants better. Systemic structural characterization reveals a farther side-chain branching point will lead to higher disorders, which provides appropriate sites to accommodate extrinsic molecular dopants without harming original chain packings and charge-transport channels. Therefore, better sustainability of solid-state microstructure is obtained, yielding a stable conductivity even when overloading massive dopants. This work highlights the importance of realizing high host-dopant miscibility in molecular doping of conjugated polymers.
RESUMO
Conjugated polymers usually form crystallized and amorphous regions in the solid state simultaneously, making it difficult to accurately determine their precise microstructures. The lack of multiscale microstructures of conjugated polymers limits the fundamental understanding of the structure-property relationships in polymer-based optoelectronic devices. Here, crystals of two typical conjugated polymers based on four-fluorinated benzodifurandione-based oligo(p-phenylene vinylene) (F4 BDOPV) and naphthalenediimide (NDI) motifs, respectively, are obtained by a controlled self-assembly process. The strong diffractivity of the polymer crystals brings an opportunity to determine the crystal structures by combining X-ray techniques and molecular simulations. The precise polymer packing structures are useful as initial models to evaluate the charge transport properties in the ordered and disordered phases. Compared to the spin-coated thin films, the highly oriented polymer chains in crystals endow higher mobilities with a lower hopping energy barrier. Microwire crystal transistors of F4 BDOPV- and NDI-based polymers exhibit high electron mobilities of up to 5.58 and 2.56 cm2 V-1 s-1 , respectively, which are among the highest values in polymer crystals. This work presents a simple method to obtain polymer crystals and their precise microstructures, promoting a deep understanding of molecular packing and charge transport for conjugated polymers.
RESUMO
Molecular doping plays an important role in the modification of carrier density of organic semiconductors thus enhancing their optoelectronic performance. However, efficient n-doping remains challenging, especially owing to the lack of strongly reducing and air-stable n-dopants. Herein, an N-heterocyclic carbene (NHC) precursor, DMImC, is developed as a thermally activated n-dopant with the excellent stability in air. Its thermolysis in situ regenerates free NHC and subsequently dopes typical organic semiconductors. In sequentially doped FBDPPV films, DMImC does not disturb the π-π packing of the polymer and achieves good miscibility with the polymer. As a result, a high electrical conductivity of up to 8.4â S cm-1 is obtained. Additionally, the thermally activated doping and the excellent air stability permit DMImC to be noninteractively co-processed with polymers in air. Our results reveal that DMImC can be served as an efficient n-dopant suitable for various organic semiconductors.
RESUMO
The low n-doping efficiency of conjugated polymers with the molecular dopants limits their availability in electrical conductivity, thermoelectrics, and other electric applications. Recently, considerable efforts have focused on improving the ionization of dopants by modifying the structures of host polymers or n-dopants; however, the effect of ionized dopants on the electrical conductivity and thermoelectric performance of the polymers is still a puzzle. Herein, we try to reveal the role of molecular dopant cations on carrier transport through the systematic comparison of two n-dopants, TAM and N-DMBI-H. These two n-dopants exhibit various doping features with the polymer due to their different chemical structure characteristics. For instance, while doping, TAM negligibly perturbs the polymer backbone conformation and microstructural ordering; then after ionization, TAM cations possess weak π-backbone affinity but strong intrinsic affinity with side chains, which enables the doped system to screen the Coulomb potential spatially. Such doping features lead to high carrierization capabilities for TAM-doped polymers and further result in an excellent conductivity of up to 22 ± 2.5 S cm-1 and a power factor of over 80 µW m-1 K-2, which are significantly higher than the state of the art values of the common n-dopant N-DMBI-H. More importantly, this strategy has also proven to be widely applicable in other doped polymers. Our investigations indicate the vital role of dopant counterions in high electrical and thermoelectric performance polymers and also suggest that, without sacrificing Seebeck coefficients, high conductivities can be realized with precise regulation of the interaction between the cations and the host.
RESUMO
N-doping plays an irreplaceable role in controlling the electron concentration of organic semiconductors thus to improve performance of organic semiconductor devices. However, compared with many mature p-doping methods, n-doping of organic semiconductor is still of challenges. In particular, dopant stability/processability, counterion-semiconductor immiscibility and doping induced microstructure non-uniformity have restricted the application of n-doping in high-performance devices. Here, we report a computer-assisted screening approach to rationally design of a triaminomethane-type dopant, which exhibit extremely high stability and strong hydride donating property due to its thermally activated doping mechanism. This triaminomethane derivative shows excellent counterion-semiconductor miscibility (counter cations stay with the polymer side chains), high doping efficiency and uniformity. By using triaminomethane, we realize a record n-type conductivity of up to 21 S cm-1 and power factors as high as 51 µW m-1 K-2 even in films with thicknesses over 10 µm, and we demonstrate the first reported all-polymer thermoelectric generator.
RESUMO
To improve the biodegradation efficiency of fluoroquinolone antibiotics during sewage treatment, fluoroquinolone aerobic, anaerobic and facultative degrading enzymes for fluoroquinolone degradation were modified by molecular docking and homology modelling. First, amino acid residues of the binding sites of degrading enzymes for the target fluoroquinolones ciprofloxacin (CIP), norfloxacin (NOR) and ofloxacin (OFL) were analysed by the molecular docking method. The hydrophobic amino acid residues within 5 Å of the target fluoroquinolone molecules were selected as the modification sites. The hydrophobic amino acid residues at the modified sites were replaced by the hydrophilic amino acid residues, and 150 amino acid sequence modification schemes of the degrading enzymes were designed. Subsequently, a reconstruction scheme of the degrading enzyme amino acid sequence reconstruction scheme was submitted to the SWISS-MODEL server and a selected homology modelling method was used to build a new structure of the degrading enzyme. At the same time, the binding affinities between the novel degrading enzymes and the target fluoroquinolones (represented by the docking scoring function) were evaluated by the molecular docking method. It was found that the novel enzymes can simultaneously improve the binding affinities for the three target fluoroquinolones, and the degradation ability of the six modification schemes was increased by more than 50% at the same time. Among the novel enzymes, the affinity effect of the novel anaerobic enzyme (6-1) with CIP, NOR and OFL was significantly increased, with increases of 129.24%, 165.06% and 169.59%, respectively, followed by the facultative enzyme and aerobic enzyme. In addition, the designed degrading enzymes had certain selectivity for the degradation of the target quinolone. Among the novel enzymes, the binding affinities of the novel anaerobic enzyme (6-3) and CIP, the novel aerobic enzyme (3-6) and NOR, and the novel facultative enzyme (13-6) and OFL were increased by 149.71%, 178.57% and 297.12% respectively. Calculations using the Gaussian09 software revealed that the degradation reaction barrier of the novel degrading enzyme (7-1) and CIP NOR and OFL decreased by 37.65 kcal·mol-1, 6.28 kcal·mol-1 and 6.28 kcal·mol-1, respectively, which would result in efficient degradation of the target fluoroquinolone molecules. By analysing the binding affinity of the degrading enzymes before and after the modification with methanol, it was further speculated that the degradation effect of the modified aerobic degrading enzymes on organic matter was lower than that before the modification, and the increase or decrease in the degradation effect was less than 10%. The mechanism analysis found that the interaction between the modified amino acid residues of the degrading enzymes and the fluoroquinolone molecules increased. The average distance between the amino acid residues and the fluoroquinolone molecules represented a comprehensive affinity effect, and its value was positively correlated with the degradation effect of the novel degrading enzymes.
Assuntos
Antibacterianos/metabolismo , Ciprofloxacina/metabolismo , Modelos Moleculares , Norfloxacino/metabolismo , Ofloxacino/metabolismo , Aminoácidos/metabolismo , Antibacterianos/química , Sítios de Ligação , Biodegradação Ambiental , Ciprofloxacina/química , Norfloxacino/química , Ofloxacino/químicaRESUMO
Conjugated polymers with high thermoelectric performance enable the fabrication of low-cost, large-area, low-toxicity, and highly flexible thermoelectric devices. However, compared to their p-type counterparts, n-type polymer thermoelectric materials show much lower performance, which is largely due to inefficient doping and a much lower conductivity. Herein, it is reported that the development of a donor-acceptor (D-A) polymer with enhanced n-doping efficiency through donor engineering of the polymer backbone. Both a high n-type electrical conductivity of 1.30 S cm-1 and an excellent power factor (PF) of 4.65 µW mK-2 are obtained, which are the highest reported values among D-A polymers. The results of multiple characterization techniques indicate that electron-withdrawing modification of the donor units enhances the electron affinity of the polymer and changes the polymer packing orientation, leading to substantially improved miscibility and n-doping efficiency. Unlike previous studies in which improving the polymer-dopant miscibility typically resulted in lower mobilities, the strategy maintains the mobility of the polymer. All these factors lead to prominent enhancement of three orders magnitude in both the electrical conductivity and the PF compared to those of the non-engineered polymer. The results demonstrate that proper donor engineering can enhance the n-doping efficiency, electrical conductivity, and thermoelectric performance of D-A copolymers.
RESUMO
Molecular packing in organic single crystals greatly influences their charge transport properties but can hardly be predicted and designed because of the complex intermolecular interactions. In this work, we have realized systematic fine-tuning of the single-crystal molecular packing of five benzodifurandione-based oligo(p-phenylenevinylene) (BDOPV)-based small molecules through incorporation of electronegative fluorine atoms on the BDOPV backbone. While these molecules all exhibit similar column stacking configurations in their single crystals, the intermolecular displacements and distances can be substantially modified by tuning of the amounts and/or the positions of the substituent fluorine atoms. Density functional theory calculations showed that the subtle differences in charge distribution or electrostatic potential induced by different fluorine substitutions play an important role in regulating the molecular packing of the BDOPV compounds. Consequently, the electronic couplings for electron transfer can vary from 71 meV in a slipped stack to 201 meV in a nearly cofacial antiparallel stack, leading to an increase in the electron mobility of the BDOPV derivatives from 2.6 to 12.6 cm(2) V(-1) s(-1). The electron mobility of the five molecules did not show a good correlation with the LUMO levels, indicating that the distinct difference in charge transport properties is a result of the molecular packing. Our work not only provides a series of high-electron-mobility organic semiconductors but also demonstrates that fluorination is an effective approach for fine-tuning of single-crystal packing modes beyond simply lowering the molecular energy levels.