Multi-Omics Analysis Revealed the AGR-FC.C3 Locus of Brassica napus as a Novel Candidate for Controlling Petal Color.

Variations in the petal color of Brassica napus are crucial for ornamental value, but the controlled loci for breeding remain to be unraveled. Here, we report a candidate locus, AGR-FC.C3, having conducted a bulked segregant analysis on a segregating population with different petal colors. Our results showed that the locus covers 9.46 Mb of the genome, harboring 951 genes. BnaC03.MYB4, BnaC03.MYB85, BnaC03.MYB73, BnaC03.MYB98, and BnaC03.MYB102 belonging to MYB TFs families that might regulate the petal color were observed. Next, a bulk RNA sequencing of white and orange-yellow petals on three development stages was performed to further identify the possible governed genes. The results revealed a total of 51 genes by overlapping the transcriptome data and the bulked segregant analysis data, and it was found that the expression of BnaC03.CCD4 was significantly up-regulated in the white petals at three development stages. Then, several novel candidate genes such as BnaC03.ENDO3, BnaC03.T22F8.180, BnaC03.F15C21.8, BnaC03.Q8GSI6, BnaC03.LSD1, BnaC03.MAP1Da, BnaC03.MAP1Db, and BnaC03G0739700ZS putative to controlling the petal color were identified through deeper analysis. Furthermo re, we have developed two molecular markers for the reported functional gene BnaC03.CCD4 to discriminate the white and orange-yellow petal colors. Our results provided a novel locus for breeding rapeseed with multi-color petals.

Interlayer Biatomic Pair Bridging the van der Waals Gap for 100% Activation of 2D Layered Material.

2D layered materials are regarded as prospective catalyst candidates due to their advantageous atomic exposure ratio. Nevertheless, the predominant population of atoms residing on the basal plane with saturated coordination, exhibit inert behavior, while a mere fraction of atoms located at the periphery display reactivity. Here, a novel approach is reported to attain complete atom activation in 2D layered materials through the construction of an interlayer biatomic pair bridge. The atoms in question have been strategically optimized to achieve a highly favorable state for the adsorption of intermediates. This optimization results from the introduction of new gap states around the Fermi level. Moreover, the presence of the interlayer bridge facilitates the electron transfer across the van der Waals gap, thereby enhancing the reaction kinetics. The hydrogen evolution reaction exhibits an impressive ultrahigh current density of 2000 mA cm-2 at 397 mV, surpassing the pristine MoS2 by approximately two orders of magnitude (26 mA cm-2 at 397 mV). This study provides new insights for enhancing the efficacy of 2D layered catalysts.

Ultrathin Van der Waals Lanthanum Oxychloride Dielectric for 2D Field-Effect Transistors.

Downsizing silicon-based transistors can result in lower power consumption, faster speeds, and greater computational capacity, although it is accompanied by the appearance of short-channel effects. The integration of high-mobility 2D semiconductor channels with ultrathin high dielectric constant (high-κ) dielectric in transistors is expected to suppress the effect. Nevertheless, the absence of a high-κ dielectric layer featuring an atomically smooth surface devoid of dangling bonds poses a significant obstacle in the advancement of 2D electronics. Here, ultrathin van der Waals (vdW) lanthanum oxychloride (LaOCl) dielectrics are successfully synthesized by precisely controlling the growth kinetics. These dielectrics demonstrate an impressive high-κ value of 10.8 and exhibit a remarkable breakdown field strength (Ebd ) exceeding 10 MV cm-1 . Remarkably, the conventional molybdenum disulfide (MoS2 ) field-effect transistor (FET) featuring a dielectric made of LaOCl showcases an almost negligible hysteresis when compared to FETs employing alternative gate dielectrics. This can be attributed to the flawlessly formed vdW interface and excellent compatibility established between LaOCl and MoS2 . These findings will motivate the further exploration of rare-earth oxychlorides and the development of more-than-Moore nanoelectronic devices.

Atomic Manufacturing of Advanced Nanomaterials.

The quest for cutting-edge materials and devices has necessitated elevated demands for manufacturing methodologies. Atomic manufacturing involves the meticulous design and fabrication of materials and devices at the atomic level, a process that has been facilitated by advancements in comprehending and manipulating atomic behavior. The attainment of atomic manufacturing is dependent on the capacity to precisely manipulate atoms, directing their reactions at will. In this review, five methodologies of atomic fabrication encompassing atomic manipulation, atomic programming, atomic epitaxy, atomic confinement, and atomic assembly are elucidated. Based on this, the utilization of atomic manufacturing in the most advanced domains including energy conversion, energy storage, quantum information technology, and optoelectronic devices is elucidated. Finally, the current challenges and outlook on the forthcoming advancement of atomic manufacturing are presented.

How does water diversion affect land use change and ecosystem service: A case study of Baiyangdian wetland, China.

Baiyangdian wetland is the biggest plant-dominated shallow freshwater wetland in Huabei Plain, providing a wide range of ecosystem services. In the past few decades, the water scarcity and eco-environmental problems resulted from climate changes and human activities have become more and more serious. To relieve the pressure of water scarcity and ecological degradation, the government has implemented ecological water diversion projects (EWDPs) since 1992. In this study, land use and land cover change (LUCC) caused by EWDPs over three decades was analyzed to quantitatively assess the impact of EWDPs on ecosystem services. Coefficients of ecosystem service value (ESV) calculation were improved for regional ESV evaluation. The results showed that the area of construction, farmland and water increased by 6171, 2827, 1393 ha, respectively, and the total ESV increased by 8.04 × 108 CNY primarily due to the increase of regulating service with water area expansion. Redundancy analysis and socio-economic comprehensive analysis showed that EWDPs impacted water area and ESV with threshold and time effect. When the water diversion exceeded the threshold, the EWDPs affected the ESV through influencing LUCC; otherwise, the EWDPs affected the ESV through influencing net primary productivity or social-economic benefits. However, the impact of EWDPs on ESV gradually weakened as time passed, which could not keep sustainability. With the establishment of Xiong'an New Area in China and implementation of carbon neutrality policy, rational EWDPs will become crucial to achieve goals of ecological restoration.

A Monolayer High-Entropy Layered Hydroxide Frame for Efficient Oxygen Evolution Reaction.

High-entropy materials with tailored geometric and elemental compositions provide a guideline for designing advanced electrocatalysts. Layered double hydroxides (LDHs) are the most efficient oxygen evolution reaction (OER) catalyst. However, due to the huge difference in ionic solubility product, an extremely strong alkali environment is necessary to prepare high-entropy layered hydroxides (HELHs), which results in an uncontrollable structure, poor stability, and scarce active sites. Here, a universal synthesis of monolayer HELH frame in a mild environment is presented, regardless of the solubility product limit. Mild reaction conditions allow this study to precisely control the fine structure and elemental composition of the final product. Consequently, the surface area of the HELHs is up to 380.5 m2  g-1 . The current density of 100 mA cm-2 is achieved in 1 m KOH at an overpotential of 259 mV, and, after 1000 h operation at the current density of 20 mA cm-2 , the catalytic performance shows no obvious deterioration. The high-entropy engineering and fine nanostructure control open opportunities to solve the problems of low intrinsic activity, very few active sites, instability, and low conductance during OER for LDH catalysts.

Curvature geometry in 2D materials.

The two-dimensional (2D) material family can be regarded as the extreme externalization form of the matter in the planar 2D space. These atomically thin materials have abundant curvature structures, which will significantly affect their atomic configurations and physicochemical properties. Curvature engineering offers a new tuning freedom beyond the thoroughly studied layer number, grain boundaries, stacking order, etc. The precise control of the curvature geometry in 2D materials can redefine this material family. Special attention will be given to this emerging field and highlight possible future directions. With the step-by-step achievement in understanding the curvature engineering effect in 2D materials and establishing reliable delicate curvature controlling strategies, a brand-new era of 2D materials research could be developed.

Characterization of Oil Body and Starch Granule Dynamics in Developing Seeds of Brassica napus.

Brassica napus is the most important oilseed crop in the world, and the lipid was stored in the oil body (OB) in the form of triacylglycerol. At present, most of studies on the relationship between oil body morphology and seed oil content in B. napus was focused on mature seeds. In the present study, the OBs in different developing seeds of B. napus with relatively high oil content (HOC) of about 50% and low oil content (LOC) of about 39% were analyzed. It was revealed that the size of OBs was first increased and then decreased in both materials. And in late seed developmental stages, the average OB size of rapeseed with HOC was higher than that of LOC, while it was reversed in the early seed developmental stages. No significant difference was observed on starch granule (SG) size in HOC and LOC rapeseed. Further results indicated that the expression of genes that involved in malonyl-CoA metabolism, fatty acid carbon chain extension, lipid metabolism, and starch synthesis in the rapeseed with HOC was higher than that of rapeseed with LOC. These results give some new insight for understanding the dynamics of OBs and SGs in embryos of B. napus.

Improving treatment for acute ischemic stroke-Clot busting innovation in the pipeline.

Acute ischemic stroke is a consequence of disrupted blood flow to the brain, caused by thrombosis-the pathological formation of occlusive clots within blood vessels, which can embolize distally to downstream tissues and microvasculature. The highest priority of stroke treatment is the rapid removal of occlusive clots and restoration of tissue perfusion. Intravenous thrombolysis is the pharmacological standard-of-care for the dissolution of blood clots, wherein thrombolytic drugs are administered to restore vessel patency. While the introduction of recombinant tissue-plasminogen activator (rtPA) in 1996 demonstrated the benefit of acute thrombolysis for clot removal, this was countered by severe limitations in terms of patient eligibility, lytic efficacy, rethrombosis and safety implications. Development of safer and efficacious treatment strategies to improve clot lysis has not significantly progressed over many decades, due to the challenge of maintaining the necessary efficacy-safety balance for these therapies. As such, rtPA has remained the sole approved acute therapeutic for ischemic stroke for over 25 years. Attempts to improve thrombolysis with coadministration of adjunct antithrombotics has demonstrated benefit in coronary vessels, but remain contraindicated for stroke, given all currently approved antithrombotics adversely impact hemostasis, causing bleeding. This Perspective provides a brief history of stroke drug development, as well as an overview of several groups of emerging drugs which have the potential to improve thrombolytic strategies in the future. These include inhibitors of the platelet receptor glycoprotein VI and the signaling enzyme PI3-Kinase, novel anticoagulants derived from hematophagous creatures, and proteolysis-targeting chimeras.

Meso-level carbon dioxide emission model based on voyage for inland ships in the Yangtze River.

To simplify the micro-level CO2 (carbon dioxide) emission calculation model, reduce the dataset quality requirement of the model, and cut down the volume of calculation, a meso-level voyage-based emission model (MeVEM) for inland ships is proposed with their navigation characteristics considered. The navigation characteristics and the main influencing factors of inland ship emissions are analyzed. The main engine power and average speed of the ships are selected as the model inputs. Accurate CO2 emissions are calculated by the use of the micro-level emission model. With that, first-order and second-order polynomial regression models are employed to establish the fitting formula to estimate the emissions per kilometer. To validate the proposed model, the Junshan segment in the middle reaches of the Yangtze River is selected as the study area, and the model parameters are determined to estimate the CO2 emissions. It is found that the model of emission per kilometer (ej, k) established by second-order polynomial regression is more accurate. The results show that the percentage error in the total amount (PETA) of the results estimated by the four proposed models (CO2 emission estimation model for the upstream cargo ships, the downstream cargo ships, the upstream oil tankers, and the downstream oil tankers) are all within ±5%, which verifies the feasibility and applicability of the model. The proposed meso-level model allows us to use a smaller input dataset which is easier to obtain, and estimate CO2 emissions from ships simply and accurately.

Dual Self-Built Gating Boosts the Hydrogen Evolution Reaction.

Optimizing the intrinsic activity of active sites is an appealing strategy for accelerating the kinetics of the catalytic process. Here, a design principle, namely "dual self-built gating", is proposed to tailor the electronic structures of catalysts. Catalytic improvement is confirmed in a model catalyst with a ReS2 -WS2 /WS2 hybridized heterostructure. As demonstrated in experimental and theoretical results, the dual gating can bidirectionally guide electron transfer and redistribute at the interface, endowing the model catalyst with an electron-rich region. The tailored electronic structures balance the adsorption of intermediates and the desorption of hydrogen synergistically to enhance the reaction kinetics for the hydrogen evolution reaction. Interestingly, the effect of dual gating can be easily amplified by the electric field. The overpotential and Tafel slope (49 mV, 35 mV dec-1 ) obtained under the electric field for ReS2 -WS2 /WS2 catalyst with the dual self-built gating effect are far below than those (210 mV, 116 mV dec-1 ) of the pure WS2 catalyst, which exhibits nearly four times improvement. The concept of dual gating can be applied to more systems, offering a new guideline for designing advanced electrocatalysts.

Effect of Stevia rebaudiana Bertoni residue on the arsenic phytoextraction efficiency of Pteris vittata L.

Soil contamination by arsenic (As) presents a high risk to public health, necessitating urgent remediation. This study sought to develop an efficient strategy for the phytoremediation of As-contaminated soil. The effects of Stevia rebaudiana Bertoni residue (SR) on the available As (A-As) concentration of soil and As extraction from the soil by Pteris vittata L. were studied by soil simulation, pot, and field experiments. The A-As concentration in the soil simulation experiment increased significantly by 84.20% after 20 days. The biomass, As concentration, and total extracted As of SR-treated P. vittata L. in the pot experiment increased significantly by 50.66%, 120.2%, and 171.2%, respectively, compared to the untreated control. The SR-treated rhizosphere soil in the pot experiment displayed a significant 21.72% decrease in total As concentration. In the one-year field experiment, treatment with SR resulted in a significant 191.1% increase in As extraction by P. vittata L. and a significant 10.26% reduction in rhizosphere soil As concentration compared to the control. This study proposes a potential mechanism for SR-mediated enhancement of P. vittata L. As extraction ability and provides a new, economic, and environmentally friendly method for As-contaminated soil remediation.

Bidirectional and reversible tuning of the interlayer spacing of two-dimensional materials.

Interlayer spacing is expected to influence the properties of multilayer two-dimensional (2D) materials. However, the ability to non-destructively regulate the interlayer spacing bidirectionally and reversibly is challenging. Here we report the preparation of 2D materials with tunable interlayer spacing by introducing active sites (Ce ions) in 2D materials to capture and immobilize Pt single atoms. The strong chemical interaction between active sites and Pt atoms contributes to the intercalation behavior of Pt atoms in the interlayer of 2D materials and further promotes the formation of chemical bonding between Pt atom and host materials. Taking cerium-embedded molybdenum disulfide (MoS2) as an example, intercalation of Pt atoms enables interlayer distance tuning via an electrochemical protocol, leading to interlayer spacing reversible and linear compression and expansion from 6.546 ± 0.039 Å to 5.792 ± 0.038 Å (~11 %). The electronic property evolution with the interlayer spacing variation is demonstrated by the photoluminescence (PL) spectra, delivering that the well-defined barrier between the multilayer and monolayer layered materials can be artificially designed.

A Superlattice-Stabilized Layered CuS Anode for High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc ion batteries (AZIBs) are attracting extensive attention owing to environmental friendliness and high safety. However, its practical applications are limited to the poor Coulombic efficiency and stability of a Zn anode. Herein, we demonstrate a periodically stacked CuS-CTAB superlattice, as a competitive conversion-type anode for AZIBs with greatly improved specific capacity, rate performance, and stability. The CuS layers react with Zn2+ to endow high capacity, while CTAB layers serve to stabilize the structure and facilitate Zn2+ diffusion kinetics. Accordingly, CuS-CTAB shows superior rate performance (225.3 mA h g-1 at 0.1 A g-1 with 144.4 mA h g-1 at 10 A g-1) and a respectable cyclability of 87.6% capacity retention over 3400 cycles at 10 A g-1. In view of the outstanding electrochemical properties, full batteries constructed with a CuS-CTAB anode and cathode (ZnxFeCo(CN)6 and ZnxMnO2) are evaluated in coin cells, which demonstrate impressive full-battery performance.

Review on strategies of close-to-natural wetland restoration and a brief case plan for a typical wetland in northern China.

Wetlands play an important role in sustaining ecosystems on the earth, which regulate water resources, adjust local climate and produce food for human beings, etc. However, wetlands are facing huge challenges due to human activities and other natural evolution, such as area shrinkage, function weakening and biodiversity decrease, and so on, therefore, some wetlands need to be urgently restored. In this study, the main technology components of close-to-natural restoration of wetlands were summarized. The ecological water requirement and water resource allocation can be optimized for the water balance between social, economy and ecology, which is a key prerequisite for maintaining wetland ecosystem. The pollution of wetland sediments and soils can be assessed by various indicators to provide the scientific basis for natural restoration of wetland base, and suitable strategies should be taken according to the actual conditions of wetland bases. The hydrological connectivity in wetlands and with related water system can be numerically simulated to make the optimal plan for improvement of hydrological connectivity. The ecological restoration of wetlands with the synergetic function of plants, animals and microorganisms was summarized, to improve the quality of wetland water environment and maintain the ecosystem stability. Based on the wetland close-to-natural restoration strategies, a brief ecological restoration plan for a typical wetland, Zaozhadian Wetland, near Xiong'an New Area in the north China was proposed from water resource guarantee, base pollution management, hydrological connectivity improvement and biological restoration. The close-to-natural restoration shows more effective, sustainable and long-lasting and thus a practical prospect.

Comparative transcriptomic analysis of seed coats with high and low lignin contents reveals lignin and flavonoid biosynthesis in Brassica napus.

BACKGROUND: Brassica napus L. (2n = 38, AACC) is one of the most important oil crops and sources of protein for animal feed worldwide. Lignin is a large molecule aromatic polymer and a major cell wall component. However, lignin in the seed coat reduces the availability and restricts the development of rapeseed cake. Therefore, it is critical to reduce the lignin content of the seed coat. Here, high-lignin (H-lignin) and low-lignin (L-lignin) content recombinant inbred lines (RILs) were selected from an RIL population for analysis. RESULTS: The cross-section results indicated that the seed coat of the H-lignin lines was thicker than that of the L-lignin lines, especially the palisade layer. The seed coats and embryos at 35, 40 and 46 days after flowering (DAF) were subjected to RNA sequencing (RNA-Seq), and the expression of the BnPAL and BnC4H gene families in the lignin pathway was significantly higher in the H-lignin seed coat than in the L-lignin seed coat. The Bn4CL gene family also showed this trend. In addition, among the genes related to plant hormone synthesis, BnaC02g01710D was upregulated and BnaA07g11700D and BnaC09g00190D were downregulated in H-lignin lines. Some transcription factors were upregulated, such as BnNAC080, BnNAC083, BnMYB9, BnMYB9-1, BnMYB60 and BnMYB60-1, while BnMYB91 was downregulated in H-lignin lines. Moreover, most genes of the flavonoid pathway, such as BnCHS and BnDFR, were strongly expressed in H-lignin seed coat. CONCLUSIONS: In Our study, some key genes such as hormone synthesis genes, transcription factors and miRNAs related to lignin and flavonoid biosynthesis were identified. A regulatory model of B. napus seed coat lignin was proposed. These results provide new insight into lignin and flavonoid biosynthesis in B. napus.

Effect of substrate load on anaerobic fermentation of rice straw with rumen liquid as inoculum: Hydrolysis and acidogenesis efficiency, enzymatic activities and rumen bacterial community structure.

Rumen liquid is excellent to effectively degrade lignocellulose. In this study, the suitable rice straw load during anaerobic fermentation of rice straw with rumen liquid as inoculum was explored to improve volatile fatty acid (VFA) production. At 10.0% rice straw load, the highest VFA concentration reached 10821.4 mg/L, and acetic acid and propionic acid were the main components. In 10.0% rice straw load system, high concentration of soluble chemical oxygen demand (SCOD) was also observed, and the enzymatic activities at 48 h were higher than those at other rice straw loads. At 10.0% rice straw load, lower diversity and richness of rumen bacteria were found than those at other rice straw loads. Bacteroides, Prevotella, and Ruminococcus were the main rumen bacteria during rice straw degradation, and the rumen bacteria might secret effective lignocellulolytic enzymes to enhance the hydrolysis and acidogenesis of rice straw. The determination of suitable rice straw load will be beneficial to the application of rumen liquid as inoculum in actual production.

Transformation of bacterial community structure in rumen liquid anaerobic digestion of rice straw.

Rumen liquid can effectively degrade lignocellulosic biomass, in which rumen microorganisms play an important role. In this study, transformation of bacterial community structure in rumen liquid anaerobic digestion of rice straw was explored. Results showed that rice straw was efficiently hydrolyzed and acidified, and the degradation efficiency of cellulose, hemicellulose and lignin reached 46.2%, 60.4%, and 12.9%, respectively. The concentration of soluble chemical oxygen demand (SCOD) and total volatile fatty acid (VFA) reached 12.9 and 8.04 g L-1. The high-throughput sequencing results showed that structure of rumen bacterial community significantly changed in anaerobic digestion. The Shannon diversity index showed that rumen bacterial diversity decreased by 32.8% on the 5th day of anaerobic digestion. The relative abundance of Prevotella and Fibrobacter significantly increased, while Ruminococcus significantly decreased at the genus level. The Spearman correlation heatmap showed that pH and VFA were the critical factors affecting the rumen bacterial community structure. The function prediction found that rumen bacteria mainly functioned in carbohydrate transport and metabolism, which might contain a large number of lignocellulose degrading enzyme genes. These studies are conducive to the better application of rumen microorganisms in the degradation of lignocellulosic biomass.

Power production waste.

The storage of large amount of power production waste occupies huge land resource; moreover, the stored or discarded waste may pollute the water environment through changing the water pH, releasing the trace and toxic elements even radioactive elements, and so on by leachate. Therefore, the recycling and disposal of power production waste are important and necessary. This paper reviews the research literatures published in 2019 on power generation waste from coal-fired and nuclear power plants, mainly including the recycling of fly ash and flue gas desulfurization gypsum in construction industry and environmental application, the recovery and immobilization of different metals from coal combustion products and selective catalytic reduction catalysts, and the treatment and disposal of radioactive elements from nuclear power plants. Practioner points Coal-fired power plant waste can be applied for material preparation and wastewater purification. Valued and toxic metals are normally recovered or removed from spent selective catalytic reduction catalyst. Recovery and removal of radioactive elements is essential for nuclear power plant wastes disposal.