RESUMO
We used a resonant-tunneling-diode (RTD) oscillator as the source of a terahertz-wave radar based on the principle of the swept-source optical coherence tomography (SS-OCT). Unlike similar reports in the terahertz range, we apply the stepwise frequency modulation to a subcarrier obtained by amplitude modulation instead of tuning the terahertz carrier frequency. Additionally, we replace the usual optical interference with electrical mixing and, by using a quadrature mixer, we can discriminate between negative and positive optical path differences, which doubles the measurement range without increasing the measurement time. To measure the distance to multiple targets simultaneously, the terahertz wave is modulated in amplitude at a series of frequencies; the signal returning from the target is detected and homodyne mixed with the original modulation signal. A series of voltages is obtained; by Fourier transformation the distance to each target is retrieved. Experimental results on one and two targets are shown.
RESUMO
We introduce a new principle for distance measurement in the terahertz-wave range using a resonant-tunneling-diode (RTD) oscillator as a source at 511 GHz and relying on the frequency-modulated continuous-wave (FMCW) radar technique. Unlike the usual FMCW radar, where the sawtooth frequency modulation is applied to the carrier, we propose applying it to a subcarrier obtained by amplitude modulation; this is advantageous when the source cannot be controlled precisely in oscillation frequency, but can easily be modulated in amplitude, as is the case of the RTD oscillator. The detailed principle and a series of proof-of-concept experimental results are presented.
RESUMO
A method to detect production faults in flexible plastic packages with the use of terahertz radiation is presented. Relying on the large difference between the absorption coefficients of plastic and water (for water-filled channel defects) and on the refraction index difference between plastic and air (for air-filled channel defects), our technique consists of focusing and scanning a terahertz beam on the sealed area of the package, followed by detection of the transmitted signal. Compared with previous methods, such as visual and ultrasound inspection, our technique can be applied to optically opaque packages and does not require immersion in a matching liquid. We tested our system on defects that we fabricated as water-filled and air-filled channels imbedded in polyethylene films, with diameters in the range of 10 to 100 microm. The detection limit (the minimum size of a detectable defect) depends on the conveying speed; this relationship was determined and analyzed. The results show that our system has the potential for application in an actual production line for real-time inspection.
Assuntos
Embalagem de Alimentos/métodos , Embalagem de Alimentos/normas , Raios Infravermelhos , Contaminação de Alimentos/prevenção & controle , Microbiologia de AlimentosRESUMO
We present an imaging system designed for use in the terahertz range. As the radiation source a backward-wave oscillator was chosen for its special features such as high output power, good wave-front quality, good stability, and wavelength tunability from 520 to 710 GHz. Detection is achieved with a pyroelectric sensor operated at room temperature. The alignment procedure for the optical elements is described, and several methods to reduce the etalon effect that are inherent in monochromatic sources are discussed. The terahertz spot size in the sample plane is 550 microm (nearly the diffraction limit), and the signal-to-noise ratio is 10,000:1; other characteristics were also measured and are presented in detail. A number of preliminary applications are also shown that cover various areas: nondestructive real-time testing for plastic tubes and packaging seals; biological terahertz imaging of fresh, frozen, or freeze-dried samples; paraffin-embedded specimens of cancer tissue; and measurement of the absorption coefficient of water by use of a wedge-shaped cell.
Assuntos
Diagnóstico por Imagem , Óptica e Fotônica , Animais , Artefatos , Galinhas , Diagnóstico por Imagem/instrumentação , Desenho de Equipamento , Humanos , Modelos Teóricos , Plantas , SuínosRESUMO
A self-calibrating algorithm for phase-shift interferometry is described that is able to cancel the effect of accidental relative tilts that may occur during phase stepping. The algorithm is able to retrieve both the phase steps and the tilts that accompany them. Only three phase-shifted interferograms are needed, and no other information about the intentional phase shifts or possible tilts has to be supplied. This purpose is achieved by division of the interferogram space into blocks on which a previously reported self-calibrating algorithm is applied and the actual values of the local phase shifts are calculated. The information thus obtained is used for extracting the global shift and tilt values. Further improvement in the results is achieved by means of a fitting routine.
RESUMO
We describe a new interferometric configuration for optical coherence tomography that is based on the Mirau interferometer. It uses the photodetector included in a superluminescent diode package, which makes possible a highly miniaturized device. Other advantages of the configuration include its totally coaxial structure, confocal microscope operation, availability of the full working distance of the imaging objective, and no central obscuration. Fundamental characteristics such as resolution and dynamic range are discussed, and the result of measurement on a rough metallic surface is presented.