A method of ultrasound diagnosis for unilateral peripheral entrapment neuropathy based on multilevel side-to-side image contrast.

Individual variations have been reported in the existing methods for examining peripheral entrapment neuropathy, by which limited sites can be examined. In this study, the patients with unilateral carpal tunnel syndrome (CTS), cubital tunnel syndrome (CuTS) and radial nerve compression (RNC) were selected as research subjects and an ultrasound technique was proposed based on multilevel side-to-side image contrast for the diagnosis of unilateral peripheral entrapment neuropathy. According to the statistical analysis of 62 patients with CTS, CuTS or RNC, the diagnostic thresholds of the cross-sectional area swelling ratio (CSASR) for diagnosis of CTS, CuTS or RNC were 1.22, 1.51 and 1.50, respectively. The surgical therapeutic thresholds of CSASR for the treatment of CTS, CuTS and RNC were 1.48, 1.67 and 3.04, respectively. When the maximal CSASR of the diseased nerve was greater than or equal to the diagnostic threshold, the nerve compression could be diagnosed. If it was less than the diagnostic threshold, nerve compression was excluded. Conservative treatment was indicated when the maximal CSASR of the diseased nerve was less than the therapeutic threshold. When the maximal CSASR was greater than or equal to the therapeutic threshold, surgical treatment was indicated, and the nerve release procedure was selected. The novel multilevel side-to-side image contrast ultrasound technique proposed in this study can substantially reduce the impact of individual variation and explore the full course of the diseased nerve. It is a novel approach for diagnosis, treatment selection, and determination of treatment sites of unilateral peripheral entrapment neuropathy.

Minimally invasive treatment of calcaneal fractures via the sinus tarsi approach based on a 3D printing technique.

The sinus tarsi approach can be used for a limited exposure of the calcaneal fracture site. The reduction of the posterior articular surface, the shape of the calcaneus, the precise placement of the sustentacular screw (SS), the posterior articular surface screw of the calcaneal (PASS), and the long axis screw of the calcaneal (LAS) are still challenging. To that end, we proposed a minimally invasive technique for the treatment of calcaneal fractures via the sinus tarsi approach in combination with a three-dimensional (3D) printing technique. First, a 3D reconstructed model of the bilateral calcanei was obtained according to the computed tomography (CT) scan data and was used to simulate the placement of screws and acquire the screw trajectory parameters. Next, using 3D printing, a model of the calcaneus was printed, and the minimally invasive steel plate was pre-shaped to fit the lateral wall of the model. Finally, a total of 25 patients underwent this procedure. The results showed significant accuracy improvement in terms of the SS, PASS and LAS placement and in terms of the parameters including Bohler's angle, Gissane's angle, and the calcaneal width. In this work, the technique of the personalized minimally invasive treatment of calcaneal fractures improved the accuracy of screw placement (SP) and the reduction rate of posterior articular surface, improved the shape of the calcaneus, and increased the precision of the minimally invasive treatment of calcaneal fractures via the sinus tarsi approach.