Biomarkers of oxidative stress and cell damage in freshwater bivalves Diplodon parodizi exposed to landfill leachate.

Landfill is a public and environmental health problem; establishing and understanding methodologies to decrease its toxicity are thus necessary. Leachate samples were collected, at a sanitary landfill, immediately after the exit from the landfill, i.e. raw leachate (collection point A), after conventional treatment (point B) and after treatment by wetlands (point C). D. parodizi specimens were exposed to 3%, 10% and control (0%) dilutions of leachate from these collection points for 7 days. Markers of antioxidant defences and cell damage were analysed. At point B, the gills of D. parodizi showed higher glutathione-S-transferase (GST) and glutathione reductase (GR) activity; the latter is a supplier of glutathione reductase (GSH). The low GST activity at point A was associated with the hormesis effect. Higher levels of superoxide dismutase (SOD), ethoxyresorufin-O-deethylase (EROD) and glutathione peroxidase (GPx) occurred at point A. Glucose-6-phosphate dehydrogenase (G6PDH) was inhibited at the points with the highest pollutant load and at the highest leachate dilutions. Higher levels of markers at point A may be related to the high pollutant charge and specific compounds present in the untreated leachate. The multi-xenobiotic resistance mechanism (MXR), metallothionein-like proteins (MT) and lipid peroxidation (LPO) did not vary among treatments. The biomarker responses showed negative effects of the leachate on the freshwater bivalve and simultaneously showed that the wetland treatment employed at the Caximba sanitary landfill is effective.

Are there pharmaceutical compounds in sediments or in water? Determination of the distribution coefficient of benzodiazepine drugs in aquatic environment.

Alprazolam, clonazepam and diazepam are drugs belonging to the benzodiazepine class. These drugs might be important environmental contaminants in aquatic media. A total understanding of behavior and fate of drugs in aquatic environment is not available for these and other drugs. Thus, in this work, a complete optimization of sample treatment and extraction of analytes from sediments and water was described, as well a study of sediment/water distribution comparing it with sample characteristics. Ultrasound for 10 min and 3 steps using 3 mL of extraction solvent were chosen as the stirring form for extraction. A methanol/water (1:1) solution pH 12 was the best extraction solvent. Aiming to eliminate interferences, an addition of 10 µL of NaCl 3.06 mol L-1 was necessary after each step of extraction. Sediment and water samples were characterized, presenting different values on physical-chemical parameters. Six distinct sample sets of water and sediments were spiked with each benzodiazepine and analyzed. Kd values varied from 1.4 to 9.2 L kg-1 for clonazepam, 1.8-11.5 L kg-1 for alprazolam and 2.31-12  L kg-1 for diazepam. A principal component analysis showed high dependence on Kd with sample characteristics mainly related to sediments. In the systems, whose sediments presented high levels of clay, silt and organic matter, the drugs presented a great interaction with the solid part of the system, increasing the Kd value. Koc values varied from 149.25 to 634.13 L kg-1 for clonazepam, 186.57-852.48 L kg-1 for alprazolam, and 194.68-1189.81 L kg-1 for diazepam.

In vitro bioaccessibility of Al, Cu, Cd, and Pb following simulated gastro-intestinal digestion and total content of these metals in different Brazilian brands of yerba mate tea.

Yerba mate tea contains various biochemically active substances. However, it can contain toxic metals. Thus, this work reports the total concentrations of Cd, Cu, Pb and Al in the commercial products, as well as the concentrations in infusions prepared. The bioaccessibility of these metals in these infusions was determined for the first time by in vitro digestion. For Al, its bioaccessibility was estimated in the presence of other ingredients used in tea consumption. In addition, the concentrations of phenolic compounds in infusions were also determined. All metals studied were detected in the samples ranging from 76 ng g-1 (Cd) to 526 µg g-1 (Al). In general, Cd and Cu were the most bioaccessible metals, while Al was found in a relatively inert form. The addition of sugar and honey in infusions decreased the Al bioaccessibility. The relationship between the phenolic and the leaching of Al for the beverages was observed.

Ultrasound-assisted emulsification microextraction combined with graphite furnace atomic absorption spectrometry for the chromium speciation in water samples.

A simple method was proposed by ultrasound-assisted emulsification microextraction (UAEME) combined with GF AAS for Cr speciation in water samples using tributhylphosphate (TBP) as extractor solvent and dispersion with ultrasound, without disperser solvent. The selective separation and pre-concentration of Cr(VI) species in an aqueous medium with HCl and NaCl was optimized with Rotatable Central Composite Design. Total Cr was determined after oxidation of Cr(III) to Cr(VI) by KMnO4. This method resulted in detection limits of 0.85 ng L-1 for Cr(VI) and 1.82 ng L-1 for Cr(total), as well as enrichment factors around 77. The accuracy was evaluated with mineral, tap and natural water. The recovery ranged from 90% to 114%. A case study was carried out with Brazilian commercial mineral water and the total concentrations ranged from 0.47 ±â€¯0.01 µg L-1 to 3.9 ±â€¯0.19 µg L-1. The Cr(VI) values ranged from 0.02 ±â€¯0.01 µg L-1 to 2.3 ±â€¯0.13 µg L-1.

Tipifarnib Inhibits HRAS-Driven Dedifferentiated Thyroid Cancers.

Of the three RAS oncoproteins, only HRAS is delocalized and inactivated by farnesyltransferase inhibitors (FTI), an approach yet to be exploited clinically. In this study, we treat mice bearing Hras-driven poorly differentiated and anaplastic thyroid cancers (Tpo-Cre/HrasG12V/p53flox/flox ) with the FTI tipifarnib. Treatment caused sustained tumor regression and increased survival; however, early and late resistance was observed. Adaptive reactivation of RAS-MAPK signaling was abrogated in vitro by selective RTK (i.e., EGFR, FGFR) inhibitors, but responses were ineffective in vivo, whereas combination of tipifarnib with the MEK inhibitor AZD6244 improved outcomes. A subset of tumor-bearing mice treated with tipifarnib developed acquired resistance. Whole-exome sequencing of resistant tumors identified a Nf1 nonsense mutation and an activating mutation in Gnas at high allelic frequency, supporting the on-target effects of the drug. Cell lines modified with these genetic lesions recapitulated tipifarnib resistance in vivo This study demonstrates the feasibility of targeting Ras membrane association in cancers in vivo and predicts combination therapies that confer additional benefit.Significance: Tipifarnib effectively inhibits oncogenic HRAS-driven tumorigenesis and abrogating adaptive signaling improves responses. NF1 and GNAS mutations drive acquired resistance to Hras inhibition, supporting the on-target effects of the drug. Cancer Res; 78(16); 4642-57. ©2018 AACR.

Determination of Cu, Cd, Pb and Cr in yogurt by slurry sampling electrothermal atomic absorption spectrometry: A case study for Brazilian yogurt.

A slurry sampling electrothermal atomic absorption spectrometric method is proposed for the determination of trace elements such as Cu, Cr, Cd and Pb in yogurt. The main factors affecting the slurry preparation were optimized: nature and concentration of acid solution and sonication time. The analytical method was validated in-house by calibration, linearity, limits of detection and quantification, precision and accuracy test obtaining satisfactory results in all cases. The proposed method was applied for the determination of Cd, Cr, Cu and Pb in some Brazilian yogurt samples. For these samples, the concentrations ranged from 2.5±0.2 to 12.4±0.2ngg-1; 34±3 to 899±7ngg-1; <8.3 to 12±1ngg-1; and <35.4 to 210±16ngg-1 for Cd, Cu, Cr and Pb, respectively. The daily intake of Cd, Cu, Cr and Pb via consumption of these samples was estimated.

Direct Determination of Nimesulide in Natural Waters and Wastewater by Cathodic Stripping Voltammetry.

Pharmaceuticals are included in a group of compounds considered as contaminants of emerging concern (CECs) in environmental matrices. The quantification of CECs is typically accomplished using chromatographic methods that require several sample pretreatment steps. The current study proposes a voltammetric method to quantify directly nimesulide (NIM) in aqueous samples. The voltammetric parameters were optimized and chosen based on the profile of the voltammograms and peak current intensity. The adequacy of the analytical method was evaluated using validation criteria, such as accuracy, selectivity, linearity, detection, and quantification limits. Linearity was assessed by a standard addition curve at a concentration range of 0.5-130 µg L-1 of NIM. The limit of quantification was 0.50 µg L-1, with 60 s of preconcentration time. Accuracy was expressed as recovery percentages of NIM and ranged from 111.4 to 119.8%. The voltammetric method herein proposed has several advantages over others already used to determine NIM, such as fewer sample pretreatment steps, faster, and cheaper analyses. NIM was detected in wastewater samples at concentration levels ranging from 101.7 to 385.0 µg L-1. This result is the first evidence about NIM occurrences in environmental matrices in the area surrounding the Itaipu Lake reservoir in Brazil.

Determination of labile species of As(V), Ba, Cd, Co, Cr(III), Cu, Mn, Ni, Pb, Sr, V(V), and Zn in natural waters using diffusive gradients in thin-film (DGT) devices modified with montmorillonite.

A binding phase based on the clay mineral montmorillonite (MT) was used as a sorbent in this work, which employed diffusive gradients in thin-film (DGT) devices to determine the lability of trace elements in natural waters. Montmorillonite exhibits low cost, wide availability, ease of handling, high ion-exchange capacity, and reusability. As(V), Ba2+, Cd2+, Co2+, Cr(III), Cu2+, Mn2+, Ni2+, Pb2+, Sr2+, V(V), and Zn2+ were quantitatively sorbed by MT and eluted with 1.0 mol L-1 HNO3, which provided efficiency above 70% of recovery. Validation tests were performed with synthetic solutions. The recovery of known concentrations ranged from 83 to 110%. The performance of modified DGT was compared with conventional DGT devices in experiments lasting 6 and 48 h. The results obtained with both DGT devices showed no significant differences with 95% confidence. DGT samplers with MT were deployed in the determination of labile forms of the elements in water samples from Iguaçu River (Paraná, Brazil). The measured masses of elements in MT for various durations showed good fit to a theoretical line, indicating that the results agreed with the principle of the DGT technique. The concentrations of labile species in the sample proceeded as follows; Sr > Cd > Ba > Cu > Cr > Mn > Zn > Pb. The results suggest that DGT devices with MT are an effective alternative for speciation analysis of a wide range of elements (cations as well as anions) in natural waters.

Rapid Screening Method for Detecting Ethinyl Estradiol in Natural Water Employing Voltammetry.

17α-Ethinyl estradiol (EE2), which is used worldwide in the treatment of some cancers and as a contraceptive, is often found in aquatic systems and is considered a pharmaceutically active compound (PhACs) in the environment. Current methods for the determination of this compound, such as chromatography, are expensive and lengthy and require large amounts of toxic organic solvents. In this work, a voltammetric procedure is developed and validated as a screening tool for detecting EE2 in water samples without prior extraction, clean-up, or derivatization steps. Application of the method we elaborate here to EE2 analysis is unprecedented. EE2 detection was carried out using differential pulse adsorptive cathodic stripping voltammetry (DP AdCSV) with a hanging mercury drop electrode (HMDE) in pH 7.0 Britton-Robinson buffer. The electrochemical process of EE2 reduction was investigated by cyclic voltammetry at different scan rates. Electroreduction of the hormone on a mercury electrode exhibited a peak at -1.16 ± 0.02 V versus Ag/AgCl. The experimental parameters were as follows: -0.7 V accumulation potential, 150 s accumulation time, and 60 mV s-1 scan rate. The limit of detection was 0.49 µg L-1 for a preconcentration time of 150 s. Relative standard deviations were less than 13%. The method was applied to the detection of EE2 in water samples with recoveries ranging from 93.7 to 102.5%.

New approach to the determination of contaminants of emerging concern in natural water: study of alprazolam employing adsorptive cathodic stripping voltammetry.

Contaminants of emerging concern (CECs) are chemicals, including pharmaceutical and personal care products, not commonly monitored in the aquatic environment. Pharmaceuticals are nowadays considered as an important environmental contaminant. Chromatography methods which require expensive equipment and complicated sample pretreatment are used for detection of CECs in natural water. Thus, in this study we proposed a simple, fast, and low-cost voltammetric method as a screening tool for the determination of CECs in natural water prior to chromatography. A case study was conducted with alprazolam (benzodiazepine). The method was optimized and validated in-house. The limit of quantification was 0.4 µg L(-1) for a 120 s preconcentration time. The recoveries ranged from 93 to 120 % for accuracy tests. A further proposal aim was to determine for the first time the occurrence of alprazolam in Brazilian river water and to evaluate its potential use as a marker of contamination by wastewater.

Relationship between geographical origin and contents of Pb, Cd, and Cr in honey samples from the state of Paraná (Brazil) with chemometric approach.

The aim of this study was to determine the trace elements, Pb, Cd, and Cr in honey samples from eight different regions from the state of Paraná (Brazil), using slurry sampling graphite furnace atomic absorption spectrometry. Chemometric analysis (principal component analysis (PCA)) was applied to classify honey samples according to their levels of the trace elements Pb, Cd, and Cr, which is also related to the geographical origin of honey samples. The mean concentration for the elements followed the order Pb > Cr > > Cd. The mean values were 200 ± 76, 88 ± 14, and 4.1 ± 4 ng g(-1) for Pb, Cr, and Cd, respectively. It could be verified that honey samples are geographically separated, especially with regard to Pb and Cd contents. Thus, honey can be considered a bioindicator of environmental contamination, suggesting possible contamination in soil, water, and air. This contamination can be related to natural or anthropogenic sources present in the study regions.

Direct determination of Cd, Pb and Cr in honey by slurry sampling electrothermal atomic absorption spectrometry.

Slurry sampling electrothermal atomic absorption spectrometry was used for direct determination of Cr, Pb and Cd in honey without sample pretreatment. The honey slurries were prepared in aqueous solution containing hydrogen peroxide and nitric acid. The slurries were directly introduced in the pyrolytic graphite tubes. Pd-Mg was used as a chemical modifier only for Cd determination. Analytical curves were performed with aqueous standards for Pb and Cr and with addition of fructose for Cd. The quantification limits for Cd, Pb and Cr were 2.0, 5.4 and 9.4ngg(-1), respectively. Acceptable precision of the methodology was obtained through repeatability and intermediate precision. In the accuracy study, recoveries were satisfactory (94-101%) for the three elements. The methodology was applied in honey from Paraná (Brazil). The concentrations of Pb, Cd and Cr ranged from 141 to 228ngg(-1), <2.0 to 8ngg(-1) and 83 to 94ngg(-1), respectively.

Identification of copper sources in urban surface waters using the principal component analysis based on aquatic parameters.

The goal of this work was to identify the sources of copper loads in surface urban waters using principal component analysis under the aquatic parameters data evaluation approach. Water samples from the Irai and Iguacu rivers were collected monthly during a 12-month period at two points located upstream and downstream of a metropolitan region. pH, total alkalinity, dissolved chloride, total suspended solids, dissolved organic matter, total recoverable copper, temperature, and precipitation data provided some reliable information concerning the characteristics and water quality of both rivers. Principal component analysis indicated seasonal and spatial effects on copper concentration and loads in both environments. During the rainy season, non-point sources such as urban run-off are believed to be the major source of copper in both cases. In contrast, during the lower precipitation period, the discharge of raw sewage seems to be the primary source of copper to the Iguacu River, which also exhibited higher total metal concentrations.