Trailing-edge far-field noise and noise source characterization in high inflow turbulence conditions.

Airframe noise currently is a bottle neck in various applications, e.g., wind energy, maritime applications, and aircraft. Airframe noise is significantly increased by the presence of inflow turbulence. High inflow turbulence influences the boundary layer and wall-pressure fluctuations close to the trailing edge of airfoils. In this research, measurements of boundary layer and wall-pressure fluctuations near the trailing edge of an airfoil are conducted to investigate how the inflow turbulence affects the trailing-edge noise generation mechanism. Far-field noise measurements of additional three airfoils are shown to understand the role of the airfoil geometry in the dominant noise source for the cases of inflow turbulence and to generalize the observed increase in trailing-edge noise. Inflow turbulence leads to an increase in both the wall-pressure spectrum and spanwise correlation length. Trailing-edge noise increases due to the inflow turbulence in the entire frequency range at least 2 dB up to more than 15 dB for all the cases. The contribution of leading- and trailing-edge noise to the total noise varies with the airfoil geometry and inflow velocity, with the trailing-edge noise dominating in a larger frequency range for the thickest airfoil and for lower velocities.

Inflow turbulence distortion for airfoil leading-edge noise prediction for large turbulence length scales for zero-mean loading.

Turbulence distortion due to airfoil finite thickness is an important but not fully understood phenomenon that affects the airfoil radiated noise, resulting in inaccurate noise predictions. This study discusses the turbulence distortion in the leading edge (LE) region of an airfoil aiming to obtain more accurate LE noise predictions. Wind tunnel experiments were performed for National Advisory Committee for Aeronautics (NACA) 0008 and NACA 0012 airfoils at zero angle of attack subjected to large turbulence length scales (between 10 and 43 times the airfoil LE radius) generated by a grid and a rod. Hot-wire and surface pressure measurements were performed in the LE region. Results show that the root mean square of the velocity fluctuations urms and the turbulence integral length scale Λf at the stagnation line decrease considerably as the LE is approached. Rod-airfoil radiated noise was measured and compared with Amiet's model. The predicted noise overestimates the LE noise for high frequencies. However, the prediction agrees well with measurements when the turbulence spectrum based on the rapid distortion theory is used in Amiet's model, with as inputs the urms and Λf values measured close to the LE. This work's main contribution is to demonstrate that more accurate noise predictions are obtained when the inputs to the model consider the turbulence distortion effects.

Invasion-inhibitory antibodies elicited by immunization with Plasmodium vivax apical membrane antigen-1 expressed in Pichia pastoris yeast.

In a recent vaccine trial performed with African children, immunization with a recombinant protein based on Plasmodium falciparum apical membrane antigen 1 (AMA-1) conferred a significant degree of strain-specific resistance against malaria. To contribute to the efforts of generating a vaccine against Plasmodium vivax malaria, we expressed the ectodomain of P. vivax AMA-1 (PvAMA-1) as a secreted soluble protein in the methylotrophic yeast Pichia pastoris. Recognized by a high percentage of sera from individuals infected by P. vivax, this recombinant protein was found to have maintained its antigenicity. The immunogenicity of this protein was evaluated in mice using immunization protocols that included homologous and heterologous prime-boost strategies with plasmid DNA and recombinant protein. We used the following formulations containing different adjuvants: aluminum salts (Alum), Bordetella pertussis monophosphoryl lipid A (MPLA), flagellin FliC from Salmonella enterica serovar Typhimurium, saponin Quil A, or incomplete Freund's adjuvant (IFA). The formulations containing the adjuvants Quil A or IFA elicited the highest IgG antibody titers. Significant antibody titers were also obtained using a formulation developed for human use containing MPLA or Alum plus MPLA. Recombinant PvAMA-1 produced under "conditions of good laboratory practice" provided a good yield, high purity, low endotoxin levels, and no microbial contaminants and reproduced the experimental immunizations. Most relevant for vaccine development was the fact that immunization with PvAMA-1 elicited invasion-inhibitory antibodies against different Asian isolates of P. vivax. Our results show that AMA-1 expressed in P. pastoris is a promising antigen for use in future preclinical and clinical studies.