Medical Informatics and Information Technology Supporting Oral Medicine.

Electronic healthcare documentation is the key element of electronic healthcare (eHealth). Electronic oral health record (EOHR) supporting oral medicine is discussed. To provide dentists with a methodology and instrument to create oral health documentation in more efficient way, support information exchange and integration in dental domain and to ease dental decision-making and forensic dentistry identification tasks.The proposed methodology is used to model lifelong EOHR based on a small specific ontology where the use of other classification systems and nomenclatures, e.g. SNODENT, is possible. EOHRwith Lifelong DentCross user interface was developed and it has been supporting dental care at the University Hospital in Prague-Motol. The user interface is working in four languages and controlled by voice or keyboard. Lifelong DentCross user interface is reflecting the way of the work in dentistry and the EOHR can provide both structured and free text information to oral medicine.

Evaluation of dental morphometrics during the orthodontic treatment.

BACKGROUND: Diagnostic orthodontic and prosthetic procedures commence with an initial examination, during which a number of individual findings on occlusion or malocclusion are clarified. Nowadays we try to replace standard plaster casts by scanned objects and digital models. METHOD: Geometrically calibrated images aid in the comparison of several different steps of the treatment and show the variation of selected features belonging to individual biomedical objects. The methods used are based on geometric morphometrics, making a new approach to the evaluation of the variability of features. The study presents two different methods of measurement and shows their accuracy and reliability. RESULTS: The experimental part of the present paper is devoted to the analysis of the dental arch objects of 24 patients before and after the treatment using the distances between the canines and premolars as the features important for diagnostic purposes. Our work proved the advantage of measuring digitalized orthodontic models over manual measuring of plaster casts, with statistically significant results and accuracy sufficient for dental practice. CONCLUSION: A new method of computer imaging and measurements of a dental stone cast provides information with the precision required for orthodontic treatment. The results obtained point to the reduction in the variance of the distances between the premolars and canines during the treatment, with a regression coefficient RC=0.7 and confidence intervals close enough for dental practice. The ratio of these distances pointed to the nearly constant value of this measure close to 0.84 for the given set of 24 individuals.

3D reconstruction of TMJ after resection of the cyst and the stress-strain analyses.

The aim of this article is 3D analysis of the temporomandibular joint (TMJ) patient, who underwent surgery, during which the right TMJ was resected along with the ramus of mandible and consequently the joint was reconstructed with subtotal replacement. The main goal is to give a suitable formulation of mathematical model, which describes the changes of stresses in TMJ incurred after the surgery. The TMJ is a complex, sensitive and highly mobile joint which works bilaterally so each side influences the contralateral joint and because of this the distribution of the stresses is changed in the healthy joint as well. Detailed knowledge about function these are necessary for clinical application of temporomandibular joint prosthesis and also help us estimate the lifetime of the prosthesis a possibilities of alteration in the contra lateral joint components. The geometry for the 3D models is taken from the CT scan date and its numerical solution is based on the theory of semi-coercive unilateral contact problems in linear elasticity. This article provides medical part with case report, discretion of treatment, than the methods of mathematical modeling and his possibilities are described and finally results are reported.

Dental alloys and magnetic resonance imaging.

The aim of this review article is to describe the behaviour of dental alloys during the magnetic resonance imaging procedure. Mechanical and physical effects of a high frequency magnetic field are discussed. They may cause a movement or heating of metal objects present in the body, which can lead to a potential health risk for patients undergoing this examination. Metal objects with positive magnetic properties can influence magnetic resonance scans and the results of this procedure. Such negative effects are documented in experiments, theoretical studies and articles evaluating clinical trials. The safety of magnetic resonance and the compatibility of dental alloys must always be considered prior to the magnetic resonance imaging procedure.

Influence of implant length and diameter on stress distribution: a finite element analysis.

STATEMENT OF PROBLEM: Masticatory forces acting on dental implants can result in undesirable stress in adjacent bone, which in turn can cause bone defects and the eventual failure of implants. PURPOSE: A mathematical simulation of stress distribution around implants was used to determine which length and diameter of implants would be best to dissipate stress. MATERIAL AND METHODS: Computations of stress arising in the implant bed were made with finite element analysis, using 3-dimensional computer models. The models simulated implants placed in vertical positions in the molar region of the mandible. A model simulating an implant with a diameter of 3.6 mm and lengths of 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 17 mm, and 18 mm was developed to investigate the influence of the length factor. The influence of different diameters was modeled using implants with a length of 12 mm and diameters of 2.9 mm, 3.6 mm, 4.2 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 6.5 mm. The masticatory load was simulated using an average masticatory force in a natural direction, oblique to the occlusal plane. Values of von Mises equivalent stress at the implant-bone interface were computed using the finite element analysis for all variations. Values for the 3 most stressed elements of each variation were averaged and expressed in percent of values computed for reference (100%), which was the stress magnitude for the implant with a length of 12 mm and diameter of 3.6 mm. RESULTS: Maximum stress areas were located around the implant neck. The decrease in stress was the greatest (31.5%) for implants with a diameter ranging from of 3.6 mm to 4.2 mm. Further stress reduction for the 5.0-mm implant was only 16.4%. An increase in the implant length also led to a decrease in the maximum von Mises equivalent stress values; the influence of implant length, however, was not as pronounced as that of implant diameter. CONCLUSIONS: Within the limitations of this study, an increase in the implant diameter decreased the maximum von Mises equivalent stress around the implant neck more than an increase in the implant length, as a result of a more favorable distribution of the simulated masticatory forces applied in this study.

Composite veneers, crowns, and inlay bridges after orthodontic therapy--a three-year prospective study.

Composite veneers, crowns, and adhesive bridges also can be a part of interdisciplinary therapy, namely, cooperation between orthodontics and prosthodontics. This study sought to systematically analyze patients treated orthodontically and prosthodontically with permanent teeth from a long-term point of view (three years). Forty-nine composite veneers, crowns, and adhesive bridges were inserted on the anterior teeth of 20 patients as a part of reshaping and reorientation of teeth after orthodontic therapy. The results indicated that composite resin restoration, including fiber-reinforcement restoration, is the treatment of choice in anterior dentition.