Total Synthesis of (+)-Eburnamonine Using Asymmetric Alkene Cyanoamidation through C-CN Bond Activation.

We report the total synthesis of (+)-eburnamonine using enantioselective alkene cyanoamidation to form the all-carbon quaternary stereocenter. Palladium, phosphoramidite ligand, and a Lewis acid combine to form a co-catalyst that promotes C-CN activation of a cyanoformamide, followed by intramolecular alkene cyanoamidation. Overall, the synthesis of (+)-eburnamonine is accomplished in 8 steps from 4-methylene hexanoic acid and tryptamine, providing an example of asymmetric aliphatic-tethered alkene cyanoamidation and its use in total synthesis.

Two new cases of polymorphism in diagonally substituted rubrene derivatives.

The crystal structures of two rubrene derivatives, 5,11-diphenyl-6,12-bis-[4-(tri-fluoro-meth-yl)phen-yl]tetra-cene, C44H26F6, and 5,11-bis-(4-tert-butyl-phen-yl)-6,12-di-phenyl-tetra-cene, C50H44, are presented. Each are substituted on diagonal (5/11) phenyl rings. Each derivative has one polymorph reported previously. A discussion of the differences between each derivative and its previously reported polymorph is provided. The triclinic packing of the CF3-substituted structure is similar to the packing of the parent rubrene's triclinic polymorph. In the tert-butyl-substituted structure, a planar tetra-cene core formed, which has been hypothesized but never published. Crystallization conditions are provided as they differ from previous reports.

N-Pyridylimidates as Traceless Acyl Equivalents for Directed C-O Bond Functionalization.

Directing groups are a common strategy to target traditionally inert bonds, with an easily removable directing group being ideal. Herein we disclose our method for rhodium-catalyzed C-O bond functionalization of N-pyridylimidates using a recyclable and traceless amine directing group. In addition to the substrate scope, we discuss the behavior of this class of compounds and how that behavior affects their reactivity.

Microwave and Computational Study of Pivalic Sulfuric Anhydride and the Pivalic Acid Monomer: Mechanistic Insights into the RCOOH + SO3 Reaction.

The microwave spectrum of pivalic sulfuric anhydride, (CH3)3CCOOSO2OH (PivSA), has been observed by rotational spectroscopy. The compound was formed by the reaction of SO3 with (CH3)3CCOOH (pivalic acid) in a supersonic jet in a manner analogous to that previously observed with other carboxylic acids. Computational analysis indicates that the reaction is best described as a pericyclic process coupled with a 60° rotation of the t-butyl group. Product formation can occur through either a sequential (two-step) or a concerted (one-step) pathway. The former involves an internal rotation of the t-butyl group through a 0.11 kcal/mol barrier followed by the pericyclic reaction that joins the moieties. The latter passes through a second-order saddle point in which the internal rotation and pericyclic reaction occur simultaneously. This path is the most energetically favorable, as the zero-point corrected energy at the saddle point structure is 0.16 kcal/mol below that of a putative (CH3)3CCOOH-SO3 precursor complex. Additional computational work involving a series of carboxylic acids is reported, which explores the effects of gas-phase acidity and basicity of the RCOOH reactant on reaction energetics. These calculations, together with prior experimental and theoretical studies of the acetic and trifluoroacetic derivatives, demonstrate that the basicity of the carbonyl oxygen, not the acidity of the COOH proton, is the important driving factor for the reaction. As a precursor to the experimental work on the title molecule, microwave spectra of the parent and OD forms of the pivalic acid monomer were recorded and are reported here as well. A convenient synthesis of SO3 is also described.

Beyond single crystals: Imaging rubrene polymorphism across crystalline batches through lattice phonon Raman microscopy.

Polymorphism is an issue troubling numerous scientific fields. A phenomenon where molecules can arrange in different orientations in a crystal lattice, polymorphism in the field of organic photovoltaic materials can dramatically change electronic properties of these materials. Rubrene is a benchmark photovoltaic material showing high carrier mobility in only one of its three polymorphs. To use rubrene in devices, it is important to quantify the polymorph distribution arising from a particular crystal growth method. However, current methods for characterizing polymorphism are either destructive or inefficient for batch scale characterization. Lattice phonon Raman spectroscopy has the ability to distinguish between polymorphs based on low frequency intermolecular vibrations. We present here the addition of microscopy to lattice phonon Raman spectroscopy, which allows us to not only characterize polymorphs efficiently and nondestructively through Raman spectroscopy but also concurrently gain information on the size and morphology of the polymorphs. We provide examples for how this technique can be used to perform large, batch scale polymorph characterization for crystals grown from solution and physical vapor transport. We end with a case study showing how Raman microscopy can be used to efficiently optimize a green crystal growth method, selecting for large orthorhombic crystals desired for rubrene electronic device applications.

Femtosecond stimulated Raman spectroscopy - guided library mining leads to efficient singlet fission in rubrene derivatives.

Chromophores undergoing singlet fission are promising candidates for harnessing solar energy as they can generate a pair of charge carriers by the absorption of one photon. However, photovoltaic devices employing singlet fission are still lacking practical applications due to the limitations within the existing molecules undergoing singlet fission. Chemical modifications to acenes can lead to efficient singlet fission devices, but the influence of changes to molecular structure on the rate of singlet fission is challenging to model and predict. Using femtosecond stimulated Raman spectroscopy we have previously demonstrated that the triplet separation process during singlet fission in crystalline rubrene is associated with the loss of electron density from its tetracene core. Based on this knowledge, we mined a library of new rubrene derivatives with electron withdrawing substituents that prime the molecules for efficient singlet fission, without impacting their crystal packing. Our rationally chosen crystalline chromophores exhibit significantly improved singlet fission rates. This study demonstrates the utility and strength of a structurally sensitive spectroscopic technique in providing insights to spectroscopy-guided materials selection and design guidelines that go beyond energy arguments to design new singlet fission-capable chromophores.

Studies towards the total synthesis of drimentine C. Preparation of the AB and CDEF ring fragments.

The drimentine family is a class of hybrid isoprenoids derived from actinomycete bacteria. Members of this family display weak antitumor and antibacterial activity. Herein we report our efforts toward the total synthesis of drimentine C using three distinct approaches incorporating palladium-catalyzed cyanoamidation, reductive cross-coupling, and photoredox-catalyzed α-alkylation of an aldehyde as key steps. Our synthetic efforts use a convergent synthesis to assemble the terpenoid and alkaloid portions of drimentine C from readily available l-tryptophan, l-proline, and (+)-sclareolide.

Synthesis of the Madangamine Alkaloid Core by a C-C Bond Activation Cascade.

The diazatricyclic core of the madangamine alkaloids was synthesized from a densely functionalized cyclohexane derivative. An alkene and two cyanoformamide groups are used to form two new rings and a new quaternary stereocenter in a cascade reaction, which involves two Pd-catalyzed C-C bond activation steps. The synthesis of the cascade precursor involves an intramolecular Staudinger reaction of a vicinal diester that gives a [3.2.1]azabicyclooctane derivative, allowing the regioselective introduction of a monosubstituted alkene.

Chemoselectivity for Alkene Cleavage by Palladium-Catalyzed Intramolecular Diazo Group Transfer from Azide to Alkene.

Alkenes can be cleaved by means of the (3+2) cycloaddition and subsequent cycloreversion of 1,3-dipoles, classically ozone (O3 ), but the azide (R-N3 ) variant is rare. Chemoselectivity for these azide to alkene diazo group transfers (DGT) is typically disfavored, thus limiting their synthetic utility. Herein, this work discloses a palladium-catalyzed intramolecular azide to alkene DGT, which grants chemoselectivity over competing aziridination. The data support a catalytic cycloreversion mechanism distinct from other known metal-catalyzed azide/alkene reactions: nitrenoid/metalloradical and (3+2) cycloadditions. Kinetics experiments reveal an unusual mechanistic profile in which the catalyst is not operative during the rate-controlling step, rather, it is active during the product-determining step. Catalytic DGT was used to synthesize N-heterocyclic quinazolinones, a medicinally relevant structural core. We also report on the competing aziridination and subsequent ring expansion to another N-heterocyclic core structure of interest, benzodiazepinones.

Morphological, Chemical, and Electronic Changes of the Conjugated Polymer PTB7 with Thermal Annealing.

There is considerable interest in improving the performance of organic optoelectronic devices through processing techniques. Here, we study the effect of high-temperature annealing on the properties of the semiconducting polymer PTB7 and PTB7:fullerene blends, of interest as efficient organic photovoltaic (OPV) devices. Annealing to moderate temperature improves the PTB7 morphology and optoelectronic properties. High-temperature annealing also improves morphology but results in poorer optoelectronic properties. This is a result of side chain cleavage that creates by-products that act as trap states, increasing electronic disorder and decreasing mobility. We further observe changes to the PTB7 chemical structure after thermal cleavage that are similar to those following solar irradiation. This implies that side chain cleavage is an important mechanism in device photodegradation, which is a major "burn-in" loss mechanism in OPV. These results lend insight into side chain cleavage as a method of improving optoelectronic properties and suggest strategies for improvement in device photostability.

Integrating Metal-Catalyzed C-H and C-O Functionalization To Achieve Sterically Controlled Regioselectivity in Arene Acylation.

One major goal of organometallic chemists is the direct functionalization of the bonds most recurrent in organic molecules: C-H, C-C, C-O, and C-N. An even grander challenge is C-C bond formation when both precursors are of this category. Parallel to this is the synthetic goal of achieving reaction selectivity that contrasts with conventional methods. Electrophilic aromatic substitution (EAS) via Friedel-Crafts acylation is the most renowned method for the synthesis of aryl ketones, a common structural motif of many pharmaceuticals, agrochemicals, fragrances, dyes, and other commodity chemicals. However, an EAS synthetic strategy is only effective if the desired site for acylation is in accordance with the electronic-controlled regioselectivity of the reaction. Herein we report steric-controlled regioselective arene acylation with salicylate esters via iridium catalysis to access distinctly substituted benzophenones. Experimental and computational data indicate a unique reaction mechanism that integrates C-O activation and C-H activation with a single iridium catalyst without an exogenous oxidant or base. We disclose an extensive exploration of the synthetic scope of both the arene and the ester components, culminating in the concise synthesis of the potent anticancer agent hydroxyphenstatin.

Palladium and Lewis-Acid-Catalyzed Intramolecular Aminocyanation of Alkenes: Scope, Mechanism, and Stereoselective Alkene Difunctionalizations.

An expansion of methodologies aimed at the formation of versatile organonitriles, via the intramolecular aminocyanation of unactivated alkenes, is herein reported. Importantly, the need for a rigid tether in these reactions has been obviated. The ease-of-synthesis and viability of substrates bearing flexible backbones has permitted for diastereoselective variants as well. We demonstrated the utility of this methodology with the formation of pyrrolidones, piperidinones, isoindolinones, and sultams. Furthermore, subsequent transformation of these motifs into medicinally relevant molecules is also demonstrated. A double crossover 13C-labeling experiment is consistent with a fully intramolecular cyclization mechanism. Deuterium labeling experiments support a mechanism involving syn-addition across the alkene.

Synthesis and Characterization of Electron-Deficient Asymmetrically Substituted Diarylindenotetracenes.

Electron-deficient asymmetrically substituted diarylindenotetracenes were prepared via a series of Friedel-Crafts acylations, aryl-aryl cross-couplings, and an intramolecular oxidative cyclization to form the indene ring. Single-crystal X-ray experiments showed good π-π overlap with π-π distances ranging from 3.26 to 3.76 Å. Both thermogravimetric analysis and differential scanning calorimetry indicated that asymmetrically substituted indenotetracenes (ASIs) are stable at elevated temperatures. From cyclic voltammetry experiments, HOMO/LUMO energy levels of ASI derivatives were determined to be near -5.4/-4.0 eV. UV/visible absorption spectra showed strong absorption of light between 400 and 650 nm with molar attenuation coefficients from 104 to 105 M-1 cm-1. ASIs were also found to have very low fluorescence quantum yields, less than 4%. Using the solid-state packing determined from the single-crystal X-ray experiments, computational modeling indicated that ASI molecules should favor electron transport.

Femtosecond Raman Microscopy Reveals Structural Dynamics Leading to Triplet Separation in Rubrene Singlet Fission.

Singlet fission generates multiple excitons from a single photon, which in theory can result in solar cell efficiencies with values above the Shockley-Queisser limit. Understanding the molecular structural dynamics during singlet fission will help to fabricate efficient organic photovoltaic devices. Here we use femtosecond stimulated Raman spectroscopy to reveal the structural evolution during the triplet separation in rubrene. We observe vibrational signatures of the correlated triplet pair, as well as shifting of the vibrational frequencies of the 1430 and 1542 cm-1 excited state modes, which increase by more than 25 cm-1 in 5 ps. Our results indicate that the correlated pair separation into two individual triplets occurs concurrently with the loss of electron density from the tetracene backbone in rubrene. This study provides new insights into the triplet separation process and proves the utility of structurally sensitive ultrafast vibrational techniques to understand the mechanism of singlet fission.

Diastereoselective Intramolecular Cyanoamidation with Alkenes.

Reported herein is a diastereoselective intramolecular alkene cyanoamidation, wherein high d.r. values are imparted by chiral directing groups. Lactams with an α-all-carbon quaternary stereocenter are readily synthesized, which may enable access to structures frequently found in biologically active molecules and natural products.

Five Fatty Aldehyde Dehydrogenase Enzymes from Marinobacter and Acinetobacter spp. and Structural Insights into the Aldehyde Binding Pocket.

Enzymes involved in lipid biosynthesis and metabolism play an important role in energy conversion and storage and in the function of structural components such as cell membranes. The fatty aldehyde dehydrogenase (FAldDH) plays a central function in the metabolism of lipid intermediates, oxidizing fatty aldehydes to the corresponding fatty acid and competing with pathways that would further reduce the fatty aldehydes to fatty alcohols or require the fatty aldehydes to produce alkanes. In this report, the genes for four putative FAldDH enzymes from Marinobacter aquaeolei VT8 and an additional enzyme from Acinetobacter baylyi were heterologously expressed in Escherichia coli and shown to display FAldDH activity. Five enzymes (Maqu_0438, Maqu_3316, Maqu_3410, Maqu_3572, and the enzyme reported under RefSeq accession no. WP_004927398) were found to act on aldehydes ranging from acetaldehyde to hexadecanal and also acted on the unsaturated long-chain palmitoleyl and oleyl aldehydes. A comparison of the specificities of these enzymes with various aldehydes is presented. Crystallization trials yielded diffraction-quality crystals of one particular FAldDH (Maqu_3316) from M. aquaeolei VT8. Crystals were independently treated with both the NAD+ cofactor and the aldehyde substrate decanal, revealing specific details of the likely substrate binding pocket for this class of enzymes. A likely model for how catalysis by the enzyme is accomplished is also provided.IMPORTANCE This study provides a comparison of multiple enzymes with the ability to oxidize fatty aldehydes to fatty acids and provides a likely picture of how the fatty aldehyde and NAD+ are bound to the enzyme to facilitate catalysis. Based on the information obtained from this structural analysis and comparisons of specificities for the five enzymes that were characterized, correlations to the potential roles played by specific residues within the structure may be drawn.

Development and Mechanistic Study of Quinoline-Directed Acyl C-O Bond Activation and Alkene Oxyacylation Reactions.

The intramolecular addition of both an alkoxy and acyl substituent across an alkene, oxyacylation of alkenes, using rhodium catalyzed C-O bond activation of an 8-quinolinyl ester is described. Our unsuccessful attempts at intramolecular carboacylation of ketones via C-C bond activation ultimately informed our choice to pursue and develop the intramolecular oxyacylation of alkenes via quinoline-directed C-O bond activation. We provide a full account of our catalyst discovery, substrate scope, and mechanistic experiments for quinoline-directed alkene oxyacylation.

Mechanistic Model for Enantioselective Intramolecular Alkene Cyanoamidation via Palladium-Catalyzed C-CN Bond Activation.

We studied key aspects of the mechanism of Pd-catalyzed C-CN bond activation and intramolecular enantioselective alkene cyanoamidation. An Abboud-Abraham-Kamlet-Taft (AAKT) linear solvation energy relationship (LSER) model for enantioselectivity was established. We investigated the impact of Lewis acid (BPh3), Lewis base (DMPU), and no additives. BPh3 additive led to diminished enantioselectivity and differing results in 13CN crossover experiments, initial rate kinetics, and natural abundance 12C/13C kinetic isotope effect measurements. We propose two catalytic mechanisms to account for our experimental results. We propose that the DMPU/nonadditive pathway passes through a κ2-phosphoramidite-stabilized Pd+ intermediate, resulting in high enantioselectivity. BPh3 prevents the dissociation of CN-, leading to a less rigid κ2-phosphoramidite-neutral Pd intermediate.

Synthesis, electrochemical properties, and crystal packing of perfluororubrene.

A synthesis of perfluorinated rubrene is reported. Electrochemical analysis revealed the significantly increased electron affinity of perfluororubrene compared with non-modified rubrene. Crystallographic investigation revealed two polymorphs and a solvate, each displaying twisted backbone conformations of perfluororubrene. Taken together, these results suggest perfluororubrene will find applications as a new n-type semiconductor.