Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Artigo em Inglês | MEDLINE | ID: mdl-37276112

RESUMO

This work presents the detailed characterization and analysis of recently reported magnetoelastic high-overtone bulk acoustic resonators (ME-HBARs), which are multimode RF-acoustic (phononic) resonators operating in the S -band. These unique devices are fabricated by microtransfer printing (MTP) piezoelectric GaN transducers onto a ferrimagnetic yttrium iron garnet (YIG) substrate. The YIG substrate also supports spin waves (magnons) when biased with an external magnetic field. The resulting phonon-magnon hybridization can be used to suppress or tune the acoustic modes of the ME-HBAR. The experiment spans 66 distinct acoustic resonance modes from 2.4 to 3 GHz, each of which can be suppressed or tuned as much as ±6 MHz, with a bias magnetic field ≤ 0.21 T. The experimental ME-HBAR data show good agreement with analytical modeling of the magnetoelastic hybridization in YIG. Such ME-HBARs can be used as dynamically tunable or switchable resonators, oscillators, comb filters, or frequency selective limiters in RF signal processing subcomponents. By integrating incompatible materials (YIG, epitaxial GaN) and disparate functionalities (spin waves, acoustic waves) into one hybrid multidomain system, this work also demonstrates the power and broad scope of the MTP technique.

2.
IEEE Trans Ultrason Ferroelectr Freq Control ; 68(11): 3406-3414, 2021 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-34143735

RESUMO

This report presents the first demonstration of passive RF comb filters made using epitaxial GaN/NbN/SiC high overtone bulk acoustic resonators (epi-HBARs). The two-port device is fabricated on electronic-grade GaN, electrically transduced, and acoustically coupled. The multi-mode epi-HBAR comb filter demonstrated here has 158 sharp filter passbands periodically distributed between 1 and 4 GHz (L-S-bands) with a free spectral range (FSR) of 17 MHz. The individual passbands of the epi-HBAR comb filter demonstrate transmission bandwidths (BWs) up to 800 kHz, f × Q values of up to 7×1014 Hz, and an average [Formula: see text] figure of merit of 41.2 at room temperature. The GaN/NbN/SiC epi-HBAR comb filter is capable of operating at high RF power levels, with linear and distortion-free performance seen up to at least 1 W of continuous wave (CW) power and up to at least 10 W of pulsed power. The compact epi-HBAR comb filters can be co-fabricated with GaN-based electronics and could potentially replace larger, off-chip or discrete-component comb filters. They can be used for spectrum sensing and as signal processing elements for remote sensing and pulsed radar.

3.
Sci Adv ; 7(8)2021 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-33608281

RESUMO

Creating seamless heterostructures that exhibit the quantum Hall effect and superconductivity is highly desirable for future electronics based on topological quantum computing. However, the two topologically robust electronic phases are typically incompatible owing to conflicting magnetic field requirements. Combined advances in the epitaxial growth of a nitride superconductor with a high critical temperature and a subsequent nitride semiconductor heterostructure of metal polarity enable the observation of clean integer quantum Hall effect in the polarization-induced two-dimensional (2D) electron gas of the high-electron mobility transistor. Through individual magnetotransport measurements of the spatially separated GaN 2D electron gas and superconducting NbN layers, we find a small window of magnetic fields and temperatures in which the epitaxial layers retain their respective quantum Hall and superconducting properties. Its analysis indicates that in epitaxial nitride superconductor/semiconductor heterostructures, this window can be significantly expanded, creating an industrially viable platform for robust quantum devices that exploit topologically protected transport.

4.
Nat Commun ; 11(1): 2314, 2020 May 08.
Artigo em Inglês | MEDLINE | ID: mdl-32385280

RESUMO

Solid-state quantum acoustodynamic (QAD) systems provide a compact platform for quantum information storage and processing by coupling acoustic phonon sources with superconducting or spin qubits. The multi-mode composite high-overtone bulk acoustic wave resonator (HBAR) is a popular phonon source well suited for QAD. However, scattering from defects, grain boundaries, and interfacial/surface roughness in the composite transducer severely limits the phonon relaxation time in sputter-deposited devices. Here, we grow an epitaxial-HBAR, consisting of a metallic NbN bottom electrode and a piezoelectric GaN film on a SiC substrate. The acoustic impedance-matched epi-HBAR has a power injection efficiency >99% from transducer to phonon cavity. The smooth interfaces and low defect density reduce phonon losses, yielding (f × Q) and phonon lifetimes up to 1.36 × 1017 Hz and 500 µs respectively. The GaN/NbN/SiC epi-HBAR is an electrically actuated, multi-mode phonon source that can be directly interfaced with NbN-based superconducting qubits or SiC-based spin qubits.

5.
Nature ; 555(7695): 183-189, 2018 03 07.
Artigo em Inglês | MEDLINE | ID: mdl-29516996

RESUMO

Epitaxy is a process by which a thin layer of one crystal is deposited in an ordered fashion onto a substrate crystal. The direct epitaxial growth of semiconductor heterostructures on top of crystalline superconductors has proved challenging. Here, however, we report the successful use of molecular beam epitaxy to grow and integrate niobium nitride (NbN)-based superconductors with the wide-bandgap family of semiconductors-silicon carbide, gallium nitride (GaN) and aluminium gallium nitride (AlGaN). We apply molecular beam epitaxy to grow an AlGaN/GaN quantum-well heterostructure directly on top of an ultrathin crystalline NbN superconductor. The resulting high-mobility, two-dimensional electron gas in the semiconductor exhibits quantum oscillations, and thus enables a semiconductor transistor-an electronic gain element-to be grown and fabricated directly on a crystalline superconductor. Using the epitaxial superconductor as the source load of the transistor, we observe in the transistor output characteristics a negative differential resistance-a feature often used in amplifiers and oscillators. Our demonstration of the direct epitaxial growth of high-quality semiconductor heterostructures and devices on crystalline nitride superconductors opens up the possibility of combining the macroscopic quantum effects of superconductors with the electronic, photonic and piezoelectric properties of the group III/nitride semiconductor family.

6.
J Vis Exp ; (117)2016 11 24.
Artigo em Inglês | MEDLINE | ID: mdl-27911417

RESUMO

Plasma-assisted molecular beam epitaxy is well suited for the epitaxial growth of III-nitride thin films and heterostructures with smooth, abrupt interfaces required for high-quality high-electron-mobility transistors (HEMTs). A procedure is presented for the growth of N-polar InAlN HEMTs, including wafer preparation and growth of buffer layers, the InAlN barrier layer, AlN and GaN interlayers and the GaN channel. Critical issues at each step of the process are identified, such as avoiding Ga accumulation in the GaN buffer, the role of temperature on InAlN compositional homogeneity, and the use of Ga flux during the AlN interlayer and the interrupt prior to GaN channel growth. Compositionally homogeneous N-polar InAlN thin films are demonstrated with surface root-mean-squared roughness as low as 0.19 nm and InAlN-based HEMT structures are reported having mobility as high as 1,750 cm2/V∙sec for devices with a sheet charge density of 1.7 x 1013 cm-2.


Assuntos
Transistores Eletrônicos , Elétrons
7.
J Org Chem ; 69(9): 3212-5, 2004 Apr 30.
Artigo em Inglês | MEDLINE | ID: mdl-15104468

RESUMO

A convergent synthesis of adenosine A2a agonist 1 in the form of its maleate salt 2 was achieved. The key step in this approach was the highly selective 9beta-glycosylation reaction between 2-haloadenines or an N(2)-alkyl-6-chloroguanine and a D-ribose derivative containing a 2-ethyltetrazolyl moiety. Glycosylations of other purine derivatives were also examined, and the methods developed provide efficient access to a variety of adenosine analogues such as 2-alkylaminoadenosines, an attractive class of compounds with antiinflammatory activity.


Assuntos
Agonistas do Receptor A2 de Adenosina , Adenosina/análogos & derivados , Anti-Inflamatórios/síntese química , Adenina/química , Adenosina/síntese química , Alquilação , Glicosilação , Guanina/análogos & derivados , Hidrocarbonetos Halogenados/química , Maleatos/química , Estrutura Molecular , Purinas/química , Ribose/química
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA