Supercritical Carbon Dioxide in Presence of Water for the Valorization of Spent Coffee Grounds: Optimization by Response Surface Methodology and Investigation of Caffeine Extraction Mechanism.

Spent coffee grounds are a promising bioresource that naturally contain around 50 wt% moisture which requires, for a valorization, a drying step of high energy and economic costs. However, the natural water in spent coffee grounds could bring new benefits as a co-solvent during the supercritical CO2 extraction (SC-CO2). This work reports the influence and optimization of pressure (115.9-284.1 bars), temperature (33.2-66.8 °C), and moisture content (6.4-73.6 wt%) on simultaneous extraction of lipids and polar molecules contained in spent coffee grounds by supercritical CO2 (SC-CO2) using Central Composite Rotatable Design and Response Surface Methodology. The results show that for lipids extraction, pressure is the most influent parameter, although the influence of moisture content is statistically negligible. This suggests that water does not act as barrier to CO2 diffusion in the studied area. However, moisture content is the most influent parameter for polar molecules extraction, composed of 99 wt% of caffeine. Mechanism investigations highlight that H2O mainly act by (i) breaking caffeine interactions with chlorogenic acids present in spent coffee grounds matrix and (ii) transferring selectively caffeine without chlorogenic acid by liquid/liquid extraction with SC-CO2. Thus, the experiment for the optimization of lipids and polar molecules extraction is performed at a pressure of 265 bars, a temperature of 55 °C, and a moisture content of 55 wt%.

Sonoluminescence Spectra in the First Tens of Seconds of Sonolysis of [BEPip][NTf2], at 20 kHz under Ar.

Following recent works on the sonochemical degradation of butyl ethyl piperidinium bis-(trifluoromethylsulfonyl)imide ([BEPip][NTf2]), monitoring of sonoluminescence (SL) spectra in the first tens of seconds of sonolysis was needed to better characterize the formed plasma and to question the correlation of the SL spectra with the viscosity. A very dry [BEPip][NTf2] ionic liquid (IL) and a water-saturated liquid are studied in this paper. In both cases, IL degradation is observed as soon as SL emission appears. It is confirmed that the initial evolution of the SL intensity is closely linked to the liquid viscosity that impacts the number of bubbles; however, other parameters can also play a role, such as the presence of water. The water-saturated IL shows more intense SL and faster degradation. In addition to the expected bands, new emission bands are detected and attributed to the S2 B-X emission, which is favored in the water-saturated ionic liquid.

Screening and Evaluation of Dermo-Cosmetic Activities of the Invasive Plant Species Polygonum cuspidatum.

Polygonum cuspidatum (P. cuspidatum) is among the world's most problematic invasive plant species with negative ecological, socio-economic and security consequences. Management operations in areas invaded systematically generate a large quantity of plant waste, most often without outlets. Using this plant material could constitute a new alternative treatment for sustainable management. P. cuspidatum is well known to have numerous biological properties, containing notably stilbenes, quinones, flavonoids and phenolic acids. The present work proposes a reliable strategy using powerful techniques for the screening and the evaluation of the dermo-cosmetic potential of its aerial parts (AP) and root parts (RP). To the best of our knowledge, only antioxidant and anti-tyrosinase activities were previously evaluated on P. cuspidatum among the targets studied (superoxide dismutase, hyaluronidase, elastase, collagenase and tyrosinase). The results revealed strong antioxidant and anti-collagenase activities, moderate anti-hyaluronidase activity, while weak anti-elastase and anti-tyrosinase activities were observed for ethanolic extracts. Different standards selected and screened on the same targets made it possible to correlate the observed residual activities of produced extracts of P. cuspidatum from Savoie Mont Blanc and their chemical compositions. A structure-activity study was thus conducted on main molecular families, widely represented in the genus Polygonum.

Ultrasound for Drug Synthesis: A Green Approach.

This last century, the development of new medicinal molecules represents a real breakthrough in terms of humans and animal life expectancy and quality of life. However, this success is tainted by negative environmental consequences. Indeed, the synthesis of drug candidates requires the use of many chemicals, solvents, and processes that are very hazardous, toxic, energy consuming, expensive, and generates a large amount of waste. Many large pharmaceutical companies have thus moved to using green chemistry practices for drug discovery, development, and manufacturing. One of them is the use of energy-efficient activation techniques, such as ultrasound. This review summarizes the latest most representative works published on the use of ultrasound for sustainable bioactive molecules synthesis.

Viticultural wood waste as a source of polyphenols of interest: Opportunities and perspectives through conventional and emerging extraction methods.

Viticultural waste has been widely demonstrated to contain high-added value compounds named the stilbenes. Among them, trans-resveratrol (Rsv) and trans-ε-viniferin (Vf) are the most abundant in particular in grape canes. Various emerging methods such as ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) or pressurized solvent extraction (PSE) have been studied to recover Rsv and Vf from grape canes in order to enhance their extraction. This paper gives a critical overview of the techniques used to this end, integrating conventional and non-conventional methods investigated in the literature as well as those used in industrial processes. It finally highlights that the unconventional technics are usually less time-consuming than conventional extraction ones but further investigations for the discussed compounds and biomass are needed to optimize and understand the influence of the individual parameters of each extraction process.

High frequency ultrasound as a tool for elucidating mechanistic elements of cis-cyclooctene epoxidation with aqueous hydrogen peroxide.

The use of high frequency ultrasound (800 kHz) highlights the non-radical character of the cis-cyclooctene epoxidation mediated by H2O2 and H2WO4. Combination of moderate mixing brought by the ultrasonic irradiation with precise thermoregulation of the double jacketed sonoreactor demonstrates the potential of this technique for studying and optimizing all the reaction parameters. The results not only reveal that the optimized ultrasonic conditions lead to excellent epoxidation outcomes with 96% yield and 98% selectivity but also to higher selectivities toward the epoxidation product compared with silent conditions.

Diagnosing the plasma formed during acoustic cavitation in [BEPip][NTf2] ionic liquid.

Sonoluminescence (SL) spectra of a very dry [BEPip][NTf2] ionic liquid were measured in the first minutes of sonication under Ar. The intense sonoluminescence allowed us to monitor the time-evolution of the SL spectra. Several molecular emissions were observed. Rovibronic temperatures of C2 and CN were determined giving vibrational temperatures of 5800 ± 500 K and 6000 ± 500 K and rotational temperatures (i.e. translational or gas temperatures) of 4000 ± 500 K. These temperatures stay remarkably constant during the sonolysis, while SL spectra undergo strong changes that illustrate the very fast evolution of the plasma during the first minutes of sonication. The expected strong decrease in the plasma electron energy also reflects in the evolution of the populations of CH electronically excited states. The physical meaning of temperatures derived from molecular emissions in SL spectra is discussed.

Avoid the PCB mistakes: A more sustainable future for ionic liquids.

Based on our original knowledge and experience on both polychlorinated biphenyls (PCBs) identification in aquatic ecosystems, and use of ionic liquids (ILs) as solvents and/or co-catalysts in green chemistry, we drawn a dared comparison between these two families. Indeed, PCBs has been used during several decades for their new properties, but are now considered as prevalent and persistent pollutants; some toxic effects on environment or human are still revealed. ILs, often designated as "green solvents" are increasingly used in numerous applications, but few studies reported about their environmental impact are still controversial. Through a parallel between properties and applications of PCBs and ILs, we wondered if history could not repeat itself, and how to provide a better future for ILs. Here, we provide some interesting comparisons and we discuss which tracks it could be important to follow for ILs applications in order to avoid the errors done with PCBs.

Advances in Green Organic Sonochemistry.

Over the past 15 years, sustainable chemistry has emerged as a new paradigm in the development of chemistry. In the field of organic synthesis, green chemistry rhymes with relevant choice of starting materials, atom economy, methodologies that minimize the number of chemical steps, appropriate use of benign solvents and reagents, efficient strategies for product isolation and purification and energy minimization. In that context, unconventional methods, and especially ultrasound, can be a fine addition towards achieving these green requirements. Undoubtedly, sonochemistry is considered as being one of the most promising green chemical methods (Cravotto et al. Catal Commun 63: 2-9, 2015). This review is devoted to the most striking results obtained in green organic sonochemistry between 2006 and 2016. Furthermore, among catalytic transformations, oxidation reactions are the most polluting reactions in the chemical industry; thus, we have focused a part of our review on the very promising catalytic activity of ultrasound for oxidative purposes.

Correlating the structure and composition of ionic liquids with their toxicity on Vibrio fischeri: A systematic study.

A systematic screening of the toxicity of ionic liquids (IL) towards Vibrio fischeri, a bioluminescent marine bacteria generally used in ecotoxicological bioassays, was carried out. The objectives of this work were to find hydrophilic or hydrophobic low toxicity IL and to investigate structure-toxicity relationship of IL. Toxicity of 54 IL to V. fischeri have been measured, some referring to new IL based on quinuclidinol or tropinol and some to generic IL (i.e., imidazolium, pyridinium, pyrrolidinium or piperidinium). For 47 of them, toxicity values have not been reported elsewhere. Water-soluble IL containing hydrophilic anions halide, thiocyanate, dicyanamide, trifluoromethansulfonate were studied. Some IL were found to exhibit very low toxicity towards V. fisheri. Hydrophobic IL based on bis(trifluoromethanesulfonyl)imide, tetrafluoroborate tetraphenylborate and tetracyanoborate were also studied. Toxicity was measured in a consistent way starting from aqueous solutions saturated with IL. The least toxic hydrophobic IL found in this study was [EMIM][B(CN)(4)]. A multifactorial analysis was found to be convenient for finding relevant structure parameters influencing the toxicity of IL. From this analysis, the planarity of the cation ring appeared to be a relevant parameter. Finally, good linear correlations were found when toxicity of IL was plotted either against the number of aliphatic carbons surrounding a pyridinium cation or the total number of carbons of a cation.

Ultrasound and ionic liquid: an efficient combination to tune the mechanism of alkenes epoxidation.

In this proof of concept study, the advantageous properties of both H(2)O(2)/NaHCO(3)/imidazole/Mn(TPP)OAc oxidation system and MOPyrroNTf(2) ionic liquid have been combined under ultrasonic irradiation to give an exceptionally favorable environment for Mn(TPP)OAc catalyzed olefin oxidations. The results reveal the crucial role played by the ultrasonic irradiations that influence drastically the oxidation process. In MOPyrroNTf(2) and under ultrasonic irradiation, the mechanism probably involves an oxo-manganyl intermediate at the expense of the classical bicarbonate-activated peroxide route.

Swift and efficient sono-hydrolysis of nitriles to carboxylic acids under basic condition: role of the oxide anion radical in the hydrolysis mechanism.

Carboxylic acids are promising candidates for new sustainable strategies in organic synthesis. In this paper, we ascertain the potential of ultrasound for the hydrolysis of nitriles into carboxylic acids through the study of key parameters of the reaction: pH, hydrolysis medium, reaction time and activation technique. The positive influence of ultrasound under basic conditions is due to more than mechanical effects of cavitation. Indeed, the rate of hydrolysis is dramatically increased under sonication in NaOH solutions. A radical mechanism involving the oxide anion radical O(*-) is proposed.

Reusable task-specific ionic liquids for a clean ε-caprolactam synthesis under mild conditions.

Brønsted-acidic ionic liquids that bear a sulfonic acid group, known as Forbes acids, show a good catalytic activity for the Beckmann rearrangement, used to prepare ε-caprolactam, which is a precursor of Nylon 6. The activity essentially stems from the acidity of the sulfonic acid group. Although these task specific ionic liquids suffer from a high viscosity, this drawback can be circumvented at higher temperatures. A combination of the hydrogen sulfate anion and the sulfonic acid group of the cation is needed to obtain the rearrangement product rapidly under mild conditions. When using an excess of ionic liquid, we postulate that the internal pressure of the ionic medium, generated by the high viscosity and the high number of hydrogen-bonds, is strong enough to contribute to a decrease of the thermodynamic barrier. In accordance with the "Principles of Green Chemistry," we have developed a synthesis of ε-caprolactam that requires no additional chemicals except cyclohexanone oxime and the reusable TSIL.

Swift and efficient synthesis of 4-phenylquinazolines: involvement of N-heterocyclic carbene in the key cyclization step.

An original route to 2-alkyamino-4-phenylquinazolines in three steps from simple (hetero)aromatic amines is reported here. The key step involves the intramolecular cyclization of benzoyl arylguanidines performed in [OMIm]Cl ionic liquid. The basic (hetero)aromatic guanidines deprotonate the imidazolium-based ionic liquid, thus triggering the cascade process ultimately leading to the intramolecular cyclization. This reaction is the first example of a Friedel-Crafts-type reaction in which an N-heterocyclic carbene is involved in the formation of the electrophilic intermediate.

A new ozone denuder for aerosol sampling based on an ionic liquid coating.

A new ionic liquid 1-octyl-3,5-dimethylpyridinium iodide ([O35LUT](+)[I](-)) was synthesized and utilized as coating for an ozone denuder device based on a high-volume aerosol sampler (30 m(3) h(-1)). Particle transmission of the denuder was studied, and over 99% of particles ranging from 10 to 2,500 nm were transmitted. The device, containing 4.66 g of ionic liquid, was used outdoors, under dry and damp atmospheric conditions. In order to expose the device to an average concentration of 120 ppbv (240 microg m(-3)) of ozone in air, an additional production of ozone was directly injected into the denuder. Under these conditions, over 97% of ozone was removed for approximately 120 h (5 days). Therefore, iodide-based ionic liquids can be used as a new alternative to conventional denuder coatings in order to reduce artifacts occurring during sampling of particulate matter. Future applications are not limited to ozone removal for specific aerosol sampling methods.

A general ultrasound-assisted access to room-temperature ionic liquids.

The replacement of common organic solvents by room-temperature ionic liquids (RTILs) is a topical subject in both academia and industry. In the last decades, the number of applications for RTILs has followed an exponential curve and spilled over the boundaries of chemistry. Still, one of the main drawbacks of these compounds is their difficult access. The present ultrasound-assisted method affords a general and easy access to a large variety of room-temperature ionic liquids.

Cloud point extraction: an alternative to traditional liquid-liquid extraction for lanthanides(III) separation.

Cloud point extraction (CPE) was used to extract and separate lanthanum(III) and gadolinium(III) nitrate from an aqueous solution. The methodology used is based on the formation of lanthanide(III)-8-hydroxyquinoline (8-HQ) complexes soluble in a micellar phase of non-ionic surfactant. The lanthanide(III) complexes are then extracted into the surfactant-rich phase at a temperature above the cloud point temperature (CPT). The structure of the non-ionic surfactant, and the chelating agent-metal molar ratio are identified as factors determining the extraction efficiency and selectivity. In an aqueous solution containing equimolar concentrations of La(III) and Gd(III), extraction efficiency for Gd(III) can reach 96% with a Gd(III)/La(III) selectivity higher than 30 using Triton X-114. Under those conditions, a Gd(III) decontamination factor of 50 is obtained.

Correction of inner filter effect in mirror coating cells for trace level fluorescence measurements.

The sensitivity of the spectrofluorometric technique can be improved by a factor of about 3.6 using a mirror coating cell. In the case of a large working range, the nonlinear relationship due to the absorbance of solutions between concentration of the analyte of interest and fluorescence intensity (called inner filter effect) must be corrected. This paper suggests a universal inner filter correction equation based on the physical absorbance phenomenon of a mirror coating cell that only depends on the solution absorbance spectra and the cell parameters. These parameters are determined with rhodamine b standard solutions and a simplex method-based mathematical fitting. The methodology has been successfully applied to the correction of classical and synchronous spectra in absorbent media. The partial least squares (PLS) quantification of a mixture of trace levels (approximately 1-10 microg L(-1)) of six polycyclic aromatic hydrocarbons (PAHs) by synchronous fluorescence is possible, even in an absorbent matrix. This simple method allows extension of the analytical field of fluorescence quantification to a large working range in absorbent solutions.