Robust cellulose-based hydrogel marbles with excellent stability for gas sensing.

Liquid marbles, as particle-armored droplets, have potential applications in microreactors, biomedicine, controlled release and gas detection. To improve the stability and biocompatibility of marble, biocompatible cellulose acetate particles and 3-allyloxy-2-hydroxy-propyl-cellulose (AHP-cellulose) were used to fabricate robust cellulose-based liquid marbles with excellent stability. Liquid marble was gelled into hydrogel marble via blue-light-irradiated polymerization of AHP-cellulose. The mechanical properties of cellulose-based hydrogel marble are superior to those of liquid marble. The rupture height of liquid marble is 10.5 m, which is 420 times greater than that of water marble (0.025 m). Surprisingly, the hydrogel marble with a 3 % AHP-cellulose concentration remained intact even after being dropped from a height of 50 m, which is comparable with the ability of a leather ball to withstand larger impact. When released from a height of 60 mm, hydrogel marble bounced to approximately 25.5 mm, 881 % higher than liquid marble (2.6 mm). Hydrogel marble exhibited long-lasting stability and was capable of monitoring ammonia with a detection limit of 365.2 mg/m3. The biocompatible cellulose-based hydrogel marble with excellent mechanical stability and reusability detection has great potential in chemical and environmental engineering as gas sensors.

A Green Catechol-Containing Cellulose Nanofibrils-Cross-Linked Adhesive.

Traditional adhesives with strong adhesion are widely applied in the fields of wood, building, and electronics. However, the synthesis and usage of commercial adhesives are not eco-friendly, which are harmful to human health and to the environment. In this study, a green cellulose nanofibrils/poly(hydroxyethyl methacrylate-co-dopamine methacrylamide) (CNFs/P(HEMA-co-DMA)) adhesive with excellent biocompatibility and strong bonding strength has been fabricated. P(HEMA-co-DMA) with a catechol content of 7.1 mol % was synthesized using dopamine methacrylamide and hydroxyethyl methacrylate. The CNFs/P(HEMA-co-DMA) adhesive was generated by cross-linking P(HEMA-co-DMA) solution using cellulose nanofibrils (CNFs). Strong adhesion was realized on various substrates, with a maximum lap shear strength of 5.50 MPa on steel. The NIH 3T3 cells test demonstrated that the adhesive possessed excellent biocompatibility. The green catechol-containing CNFs-cross-linked adhesive has promising potential for applications in medicine, electronic, food packaging, and engineering.