RESUMO
Self-assembled monolayers (SAMs) are emerging as platform technology for a myriad of applications, yet they still possess varied spatial stability and predictability issues as their properties are heavily dependent on subtle structural features. Reducing entropy within such a system serves as one of many potential solutions to increase order and therefore coherence/precision in measured properties. Here we explore controlled thermal annealing to improve edge disorders in SAMs and significantly reduce data variance. Using both odd- and even-numbered n-alkanethiol SAMs on Au, we observe statistically significant difference in the contact angles between edge and center. Thermal annealing at 40°C significantly narrows differences between edges and centre of the SAM, albeit with significant reduction in the parity dependent odd-even effect. This study provides a pathway to improve SAMs consistency through minimal external perturbation as reflected by the minimization of odd-even effect as SAMs become increasingly ordered.
RESUMO
Interfaces play a critical thermodynamic role in the existence of multilayer systems. Due to their utility in bridging energetic and compositional differences between distinct species, the formation of interfaces inherently creates internal strain in the bulk due to the reorganization needed to accommodate such a change. We report the effect of scaling interfacial stress by deposition of different adlayers on a host thin metal film. Intrinsic property differences between host and deposited metal atoms result in varying degree of composition and energy gradient within the interface. Interfacial stress can increase defects in the host leading to (i) energy dissipation and reorganization to minimize surface energy, and (ii) increased material strength. We infer that dissipation of interfacial stress induces defect migration, hence bulk and surface atomic reconstruction as captured by the surface roughness and grain size reduction coupled with a concomitant increase in material strength.
RESUMO
Combustion is often difficult to spatially direct or tune associated kinetics-hence a run-away reaction. Coupling pyrolytic chemical transformation to mass transport and reaction rates (Damköhler number), however, we spatially directed ignition with concomitant switch from combustion to pyrolysis (low oxidant). A 'surface-then-core' order in ignition, with concomitant change in burning rate,is therefore established. Herein, alkysilanes grafted onto cellulose fibers are pyrolyzed into non-flammable SiO2 terminating surface ignition propagation, hence stalling flame propagating. Sustaining high temperatures, however, triggers ignition in the bulk of the fibers but under restricted gas flow (oxidant and/or waste) hence significantly low rate of ignition propagation and pyrolysis compared to open flame (Liñán's equation). This leads to inside-out thermal degradation and, with felicitous choice of conditions, formation of graphitic tubes. Given the temperature dependence, imbibing fibers with an exothermically oxidizing synthon (MnCl2 ) or a heat sink (KCl) abets or inhibits pyrolysis leading to tuneable wall thickness. We apply this approach to create magnetic, paramagnetic, or oxide containing carbon fibers. Given the surface sensitivity, we illustrate fabrication of nm- and µm-diameter tubes from appropriately sized fibers.
RESUMO
The dependency of substrate roughness on wetting properties of self-assembled monolayers (SAMs) has been studied extensively, but most previous studies used limited selection of probing liquid and range of surface roughness. These studies disregarded the limit to observation of sub-nanometer odd-even parity effect, hence are inconclusive. In this work we report the role of solvent polarity on the roughness-dependency of wetting behavior of SAMs by studying static con-tact angle of a variety of probing liquids, with different polarities, on SAMs formed on Ag-based substrate with different surface morphology. By overlapping the roughness ranges with previous studies on Au, the limitation of surface roughness (RMS=1â nm) to observation of the odd-even effect using water as probing liquid was confirmed, but other probing liquid yielded different roughness-dependent behaviors, with more polar solvent showing more roughness-dependent behavior. Based on these observations, we concluded that there exists a phase-transition like behavior in SAMs due to substrate roughness and molecule chain length, but whose determination is dependent on the probing liquid.
RESUMO
Self-assembled monolayers are predicated on thermodynamic equilibrium; hence, their properties project accessible relaxation pathways. Herein, we demonstrate that charge tunneling correlates with conformational degrees of freedom(s). Results from open chain and cyclic head groups show that, as expected, distribution in tunneling data correlates with the orientation of the head group, akin to the odd-even effect and more importantly the degree of conformational freedom, but fluctuates with applied bias. Trends in nature of distributions in current density illuminate the need for higher statistical moments in understanding these rather dynamic systems. We employ skewness, kurtosis, and estimation plots to show that the conformational degree of freedom in the head group significantly amplifies the odd-even effect and may lead to enhanced or perturbed tunneling based on whether the head group is on an odd- or even-parity spacer.
RESUMO
Fabrication of tunable fine textures on solid metal surfaces often demands sophisticated reaction/processing systems. By exploiting inâ situ polymerization and self-assembly of inorganic adducts derived from liquid metals (the so-called HetMet reaction) with concomitant solidification, solid metal films with tunable texture are readily fabricated. Serving as a natural dimensional confinement, interparticle pores and capillary-adhered thin liquid films in a pre-packed bed of undercooled liquid metal particles lead to the expeditious surface accumulation of organometallic synthons, which readily oligomerize and self-assemble into concentration-dictated morphologies/patterns. Tuning particle size, particle packing (flat or textured), and reactant concentration generates diverse, autonomously organized organometallic structures on a metal particle bed. Concomitant solidification and sintering of the underlying undercooled particle bed led to a multiscale patterned solid metal surface. The process is illustrated by creating tunable features on pre-organized metal particle beds with concomitant tunable wettability as illustrated through the so-called petal and lotus effects.
RESUMO
Understanding biobased nanocomposites is critical in fabricating high performing sustainable materials. In this study, fundamental nanoparticle assembly structures at the nanoscale are examined and correlated with the macroscale properties of coatings formulated with these structures. Nanoparticle assembly mechanisms within biobased polymer matrices were probed using in situ liquid-phase atomic force microscopy (AFM) and computational simulation. Furthermore, coatings formulated using these nanoparticle assemblies with biobased polymers were evaluated with regard to the hydrophobicity and adhesion after water immersion. Two biobased glycopolymers, hydroxyethyl cellulose (HEC) and hydroxyethyl starch (HES), were investigated. Their repeating units share the same chemical composition and only differ in monomer conformations (α- and ß-anomeric glycosides). Unique fractal structures of silica nanoparticle assemblies were observed with HEC, while compact clusters were observed with HES. Simulation and AFM measurement suggest that strong attraction between silica surfaces in the HEC matrix induces diffusion-limited-aggregation, leading to large-scale, fractal assembly structures. By contrast, weak attraction in HES only produces reaction-limited-aggregation and small compact cluster structures. With high particle loading, the fractal structures in HEC formed a network, which enabled a waterborne formulation of superhydrophobic coating after silane treatment. The silica nanoparticle assembly in HEC was demonstrated to significantly improve adhesion, which showed minimum adhesion loss even after extended water immersion. The superior performance was only observed with HEC, not HES. The results bridge the assembly structures at the nanoscale, influenced by molecular conformation of biobased polymers, to the coating performance at the macroscopic level. Through this study we unveil new opportunities in economical and sustainable development of high-performance biobased materials.
RESUMO
Undercooling metals relies on frustration of liquid-solid transition mainly by an increase in activation energy. Passivating oxide layers are a way to isolate the core from heterogenous nucleants (physical barrier) while also raising the activation energy (thermodynamic/kinetic barrier) needed for solidification. The latter is due to composition gradients (speciation) that establishes a sharp chemical potential gradient across the thin (0.7-5â nm) oxide shell, slowing homogeneous nucleation. When this speciation is properly tuned, the oxide layer presents a previously unaccounted for interfacial tension in the overall energy landscape of the relaxing material. We demonstrate that 1)â the integrity of the passivation oxide is critical in stabilizing undercooled particle, a key tenet in developing heat-free solders, 2)â inductive effects play a critical role in undercooling, and 3)â the magnitude of the influence of the passivating oxide can be larger than size effects in undercooling.
RESUMO
Fabrication of bio-templated metallic structures is limited by differences in properties, processing conditions, packing, and material state(s). Herein, by using undercooled metal particles, differences in modulus and processing temperatures can be overcome. Adoption of autonomous processes such as self-filtration, capillary pressure, and evaporative concentration leads to enhanced packing, stabilization (jamming) and point sintering with phase change to create solid metal replicas of complex bio-based features. Differentiation of subtle differences between cultivars of the rose flower with reproduction over large areas shows that this biomimetic metal patterning (BIOMAP) is a versatile method to replicate biological features either as positive or negative reliefs irrespective of the substrate. Using rose petal patterns, we illustrate the versatility of bio-templated mapping with undercooled metal particles at ambient conditions, and with unprecedented efficiency for metal structures.