Synthesis and properties of an O-doped aromatic belt.

A new macrocyclic arene, dibenzofuran[3]arene, was synthesized, which could be conveniently transformed to an O-doped aromatic belt with a rigid ring-shaped structure and deep cavity. Moreover, the O-doped aromatic belt also showed a high HOMO energy and a narrow HOMO-LUMO gap experimentally and theoretically.

Electroacupuncture Inhibits Neural Ferroptosis in Rat Model of Traumatic Brain Injury via Activating System Xc-/GSH/GPX4 Axis.

BACKGROUND: Ferroptosis is an iron-dependent regulating programmed cell death discovered recently that has been receiving much attention in traumatic brain injury (TBI). xCT, a major functional subunit of Cystine/glutamic acid reverse transporter (System Xc-), promotes cystine intake and glutathione biosynthesis, thereby protecting against oxidative stress and ferroptosis. OBJECTIVE: The intention of this research was to verify the hypothesis that electroacupuncture (EA) exerted an anti-ferroptosis effect via an increase in the expression of xCT and activation of the System Xc-/GSH/GPX4 axis in cortical neurons of TBI rats. METHODS: After the TBI rat model was prepared, animals received EA treatment at GV20, GV26, ST36 and PC6, for 15min. The xCT inhibitor Sulfasalazine (SSZ) was administered 2h prior to model being prepared. The degree of neurological impairment was evaluated by means of TUNEL staining and the modified neurological severity score (mNSS). Specific indicators of ferroptosis (Ultrastructure of mitochondria, Iron and ROS) were detected by transmission electron microscopy (TEM), Prussian blue staining (Perls stain) and flow cytometry (FCM), respectively. GSH synthesis and metabolism-related factors in the content of the cerebral cortex were detected by an assay kit. Real-time quantitative PCR (RT-QPCR), Western blot (WB), and immunofluorescence (IF) were used for detecting the expression of System Xc-/GSH/GPX4 axisrelated proteins in injured cerebral cortex tissues. RESULTS: EA successfully relieved nerve damage within 7 days after TBI, significantly inhibited neuronal ferroptosis, upregulated the expression of xCT and System Xc-/GSH/GPX4 axis forward protein and promoted glutathione (GSH) synthesis and metabolism in the injured area of the cerebral cortex. However, aggravation of nerve damage and increased ferroptosis effect were found in TBI rats injected with xCT inhibitors. CONCLUSIONS: EA inhibits neuronal ferroptosis by up-regulated xCT expression and by activating System Xc-/GSH/GPX4 axis after TBI, confirming the relevant theories regarding the EA effect in treating TBI and providing theoretical support for clinical practice.

A calix[3]carbazole-based cavitand: synthesis, structure and its complexation with fullerenes.

A calix[3]carbazole-based cavitand was conveniently synthesized. It was found that the cavitand with adjustable conformation could show excellent complexation with fullerenes C60 and C70 in both solution and the solid state. Moreover, the crystal structures of the host-guest complexes show that the cavitand can stack into channel-like architectures, in which fullerenes are orderly arranged inside.

YIN Kejing's experience in treatment of cyclomastopathy by the accompanied needling at Tianchi (PC 1). / æ®·å ‹æ•¬å‚åˆºå¤©æ± ç©´æ²»ç–—ä¹³è ºå¢žç”Ÿç—‡ä¸´åºŠç»éªŒ.

The paper introduces professor YIN Kejing's clinical experience in treatment of cyclomastopathy. In pathogenesis, cyclomastopathy is relevant with dysfunction of the thoroughfare vessel and the conception vessel, the stagnation of blood and phlegm and the stagnation of liver qi. The principle of treatment prefers to unblocking the circulation of qi and blood and adjusting the balance between yin and yang. In diagnosis, the unique meridian palpation is adopted. Regarding the treatment of cyclomastopathy, the accompanied needling at Tianchi (PC 1) is recommended in combination with the external application of herbal medicines, presenting the specific characteristics of traditional Chinese medicine.

Mitigating challenges in aberration-corrected electron-beam lithography on electron-opaque substrates.

Aberration-corrected electron-beam lithography (AC-EBL) using ultra-thin electron transparent membranes has achieved single-digit nanometer resolution in two widely used electron-beam resists: poly (methyl methacrylate) (PMMA) and hydrogen silsesquioxane. On the other hand, AC-EBL implementation on thick, electron-opaque substrates is appealing for conventional top-down fabrication of quantum devices with nanometer-scale features. To investigate the performance of AC-EBL on thick substrates, we measured the lithographic point spread function of a 200 keV aberration-corrected scanning transmission electron microscope by defining both positive and negative patterns in PMMA thin films, spin-cast on thick SiO2/Si substrates. We present the problems encountered during pre-exposure beam focusing and discuss methods to overcome them. In addition, applying some of these methods using commercial 50 nm thick SiNXmembranes with thick Si support frames, we printed arrays of holes in PMMA with pitches around 26 nm on SiNX/Si substrates with increasing Si thickness. Our results show that proximity effects from even 50 nm thick SiNXmembranes limit hole arrays to 20 nm pitch; however, down to this limit, the effect of the substrate thickness on the pattern quality is minimal. These results highlight the need for novel resists less susceptible to proximity effects, or resists which can be used directly, after development, as the dielectric material in periodic gates in 2D quantum devices.

[Effect of environmental factors on mineral soil respiration: A review]. / çŽ¯å¢ƒå› å­å¯¹çŸ¿è´¨åœŸå£¤å‘¼å¸å½±å“çš„ç ”ç©¶è¿›å±•.

Mineral soil respiration, a major component of CO2 emissions from soil to atmosphere, plays a critical role in driving terrestrial ecosystem carbon cycling and is highly sensitive to environmental changes, including soil temperature, soil moisture, and substrate availability. The changes of environmental factors can affect mineral soil respiration and its temperature sensitivity thereby alters global carbon balance. We reviewed studies on the effects of environmental factors on mineral soil respiration and its temperature sensitivity. The effect of environmental factors on mineral soil respiration and its temperature sensitivity significantly differed among ecosystems. Environmental factors directly and indirectly affect mineral soil respiration and its temperature sensitivity by altering soil microbial biomass and community structure, extracellular enzyme activity, and soil porosity. Based on the results of this review, we suggested: 1) combining multiple observation techniques and methods to study the effects of environmental factors on mineral soil respiration; 2) exploring the interactive effects of multiple environmental factors on mineral soil respiration; 3) carrying out experiments on mineral soil respiration at different temporal and spatial scales; 4) improving the prediction model of mineral soil respiration and its temperature sensitivity; 5) streng-thening the role of substrate supply of recent photosynthates in the regulation of mineral soil respiration and its temperature sensitivity.

Modular Synthesis of Biphen[n]arenes Directed by Five-Membered Heterocycles.

Modular synthesis of novel biphen[n]arenes (n = 2-4) with customizable heterocycle blocks, functional skeletons, binding sites, and topological structures could be facilely achieved through the rational design and replacement of reaction modules (furan and thiophene), functional modules (substituted benzene, biphenyl, and naphthalene), and linking modules (methylene). These biphen[n]arenes were characterized by NMR, HRMS, and X-ray crystalline diffraction, complemented by DFT calculations. Their photophysical properties were thoroughly studied.

Effects of warming on fine root lifespan of forests: A review.

As an important parameter of forests growth, fine root lifespan plays an important role in plant water and nutrient absorption, and affects underground distribution of photosynthetic products and forest ecosystem carbon cycling. The impact of climate warming on fine root lifespan has become a hot issue under the context of global change. The responses of fine root lifespan to global warming will affect ecosystem carbon balance. We reviewed the research progress of the response characteristics and mechanism of fine root lifespan of trees to warming. Most stu-dies proposed that warming would affect fine root lifespan by changing rhizosphere soil environment, fine root morphology, and tree phenology. However, the growth and death of fine roots were affected by lots of factors, leading to differences in the research results on fine root lifespan due to natural environment of the study area, the way of warming, and the research objects. Therefore, it is of importance to comprehensively analyze the responses of fine root lifespan in forests under the background of climate warming to study the underground ecological process. In the future, the following research should be strengthened: 1) Combining multiple methods to warming underground and aboveground simutaneously, and explore more accurate and effective non-destructive observation methods. 2) Combining multiple observations to study the effects of warming on fine root lifespan. 3) Carrying out research on the effect of warming on fine root lifespan of different tree species, and deeply understand the response mechanism of fine root lifespan of different trees to warming. 4) A comprehensive analysis of the effects of warming on fine root lifespan from various perspectives, and an investigation into the mechanism of the combined effects of various factors on fine root lifespan. 5) The interaction between warming and other environmental factors fine root lifespan. 6) The effect of root architecture on the fine root lifespan after warming. 7) The effects of rhizosphere microorganisms (bacteria and fungi) on fine root lifespan after warming.

Infrared nano-imaging of Dirac magnetoexcitons in graphene.

Magnetic fields can have profound effects on the motion of electrons in quantum materials. Two-dimensional electron systems subject to strong magnetic fields are expected to exhibit quantized Hall conductivity, chiral edge currents and distinctive collective modes referred to as magnetoplasmons and magnetoexcitons. Generating these propagating collective modes in charge-neutral samples and imaging them at their native nanometre length scales have thus far been experimentally elusive. Here we visualize propagating magnetoexciton polaritons at their native length scales and report their magnetic-field-tunable dispersion in near-charge-neutral graphene. Imaging these collective modes and their associated nano-electro-optical responses allows us to identify polariton-modulated optical and photo-thermal electric effects at the sample edges, which are the most pronounced near charge neutrality. Our work is enabled by innovations in cryogenic near-field optical microscopy techniques that allow for the nano-imaging of the near-field responses of two-dimensional materials under magnetic fields up to 7 T. This nano-magneto-optics approach allows us to explore and manipulate magnetopolaritons in specimens with low carrier doping via harnessing high magnetic fields.

Milling Stability Prediction: A New Approach Based on a Composited Newton-Cotes Formula.

Based on a composited Newton-Cotes formula, this paper proposes a numerical method to predict milling stability considering regenerative chatter and focusing on rate and prediction accuracy. First, the dynamic model of milling motion is expressed as state-space equations considering regenerative chatter, with the tooth passing period divided into a set of time intervals. Second, a composited Newton-Cotes formula is introduced to calculate the transition function map for each time interval. Third, the state transition matrix is constructed based on the above-mentioned transition function, and the prediction stability boundary is determined by the Floquet theory. Finally, simulation analysis and experimental verification are conducted to verify the effectiveness of the proposed method. The simulation results demonstrate that, for the milling model with a single degree of freedom (DOF), the convergence rate and prediction accuracy of the proposed method are higher than those of the comparison method. The experimental results demonstrate that, for the milling model with two DOFs, the machining parameters below the prediction stability boundary can avoid the chatter as much as possible, ensuring the machined surface quality.

Quality evaluation of citrus varieties based on phytochemical profiles and nutritional properties.

Introduction: China is one of the major producers and exporters of various kinds of citrus fruits. As one of China's major citrus planting bases, Sichuan has a citrus planting area that exceeds 400,000 hectares. Meanwhile, citrus cultivation has become one of the important agricultural pillar industries in the region. Citrus fruits are reported to show various health-promoting effects, especially antioxidant activity. However, reports on the functional, nutritional and qualitative characteristics of different citrus varieties in Sichuan are still scarce. Methods: The quality attributes (color parameters, shape, and size), juice properties (titratable acids and total soluble sugar), mineral elements, and health-promoting nutritional and functional components (protein, carbohydrates, fat, dietary fiber, ascorbic acid, phenolic acids, and flavonoids), as well as antioxidant properties of 10 typical citrus varieties cultivated in Sichuan, were systematically investigated and analyzed. Results and Discussion: Significant differences among different citrus varieties were found. In particular, the total soluble sugar content of Mingrijian was higher than that of other citrus, suggesting its potential for fresh consumption and food processing. Moreover, a total of five flavonoids and nine phenolic acids were identified and quantified. Yuanhong, with higher contents of ascorbic acid and phenolic acids, was considered to be a valuable variety with excellent antioxidant capacity and can be used for value-added processing in the food industry. Principal component analysis and hierarchical cluster heatmap analysis suggested that there were significant differences among the 10 citrus varieties. Correlation analysis confirmed the significant contribution of ascorbic acid and phenolic acids to antioxidant capacity in citrus. The results can provide some references for the cultivation and selection of nutritious citrus fruits.

Circadian regulation of developmental synaptogenesis via the hypocretinergic system.

The circadian clock orchestrates a wide variety of physiological and behavioral processes, enabling animals to adapt to daily environmental changes, particularly the day-night cycle. However, the circadian clock's role in the developmental processes remains unclear. Here, we employ the in vivo long-term time-lapse imaging of retinotectal synapses in the optic tectum of larval zebrafish and reveal that synaptogenesis, a fundamental developmental process for neural circuit formation, exhibits circadian rhythm. This rhythmicity arises primarily from the synapse formation rather than elimination and requires the hypocretinergic neural system. Disruption of this synaptogenic rhythm, by impairing either the circadian clock or the hypocretinergic system, affects the arrangement of the retinotectal synapses on axon arbors and the refinement of the postsynaptic tectal neuron's receptive field. Thus, our findings demonstrate that the developmental synaptogenesis is under hypocretin-dependent circadian regulation, suggesting an important role of the circadian clock in neural development.

Integration of Microfluidic Chip and Probe with a Dual Pump System for Measurement of Single Cells Transient Response.

The integration of liquid exchange and microfluidic chips plays a critical role in the biomedical and biophysical fields as it enables the control of the extracellular environment and allows for the simultaneous stimulation and detection of single cells. In this study, we present a novel approach for measuring the transient response of single cells using a system integrated with a microfluidic chip and a probe with a dual pump. The system was composed of a probe with a dual pump system, a microfluidic chip, optical tweezers, an external manipulator, an external piezo actuator, etc. Particularly, we incorporated the probe with the dual pump to allow for high-speed liquid change, and the localized flow control enabled a low disturbance contact force detection of single cells on the chip. Using this system, we measured the transient response of the cell swelling against the osmotic shock with a very fine time resolution. To demonstrate the concept, we first designed the double-barreled pipette, which was assembled with two piezo pumps to achieve a probe with the dual pump system, allowing for simultaneous liquid injection and suction. The microfluidic chip with on-chip probes was fabricated, and the integrated force sensor was calibrated. Second, we characterized the performance of the probe with the dual pump system, and the effect of the analysis position and area of the liquid exchange time was investigated. In addition, we optimized the applied injection voltage to achieve a complete concentration change, and the average liquid exchange time was achieved at approximately 3.33 ms. Finally, we demonstrated that the force sensor was only subjected to minor disturbances during the liquid exchange. This system was utilized to measure the deformation and the reactive force of Synechocystis sp. strain PCC 6803 in osmotic shock, with an average response time of approximately 16.33 ms. This system reveals the transient response of compressed single cells under millisecond osmotic shock which has the potential to characterize the accurate physiological function of ion channels.

Cu-doped Nd0.6Sr0.4Co1-xCuxO3-δ (x = 0, 0.05, 0.1, 0.15, 0.2) as the cathode for intermediate-temperature solid oxide fuel cells.

Nd0.6Sr0.4Co1-xCuxO3-δ (x = 0, 0.05, 0.1, 0.15, 0.2) (NSCCx) was prepared by replacing Co with Cu. Its chemical compatibility, electrical conductivity, and electrochemical properties were studied by X-ray powder diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. The conductivity, AC impedance spectra, and output power of the single cell were tested in an electrochemical workstation. Results showed that the thermal expansion coefficient (TEC) and electrical conductivity of the sample decreased with the increase in Cu content. The TEC of NSCC0.1 decreased by 16.28% in the temperature range of 35 °C-800 °C, and its conductivity was 541 S cm-1 at 800 °C. Furthermore, a single cell was constructed with NSCCx as the cathode, NiO-GDC as the anode, and GDC as the electrolyte. The peak power of the cell at 800 °C was 444.87 mW·cm-2, which was similar to that of the undoped sample. Compared with the undoped NSCC, NSCC0.1 showed lower TEC while maintaining its output power. Therefore, this material can be used as a cathode for solid oxide fuel cells.

Topological and Stacked Flat Bands in Bilayer Graphene with a Superlattice Potential.

We show that bilayer graphene in the presence of a 2D superlattice potential provides a highly tunable setup that can realize a variety of flat band phenomena. We focus on two regimes: (i) topological flat bands with nonzero Chern numbers, C, including bands with higher Chern numbers |C|>1 and (ii) an unprecedented phase consisting of a stack of nearly perfect flat bands with C=0. For realistic values of the potential and superlattice periodicity, this stack can span nearly 100 meV, encompassing nearly all of the low-energy spectrum. We further show that in the topological regime, the topological flat band has a favorable band geometry for realizing a fractional Chern insulator (FCI) and use exact diagonalization to show that the FCI is in fact the ground state at 1/3 filling. Our results provide a realistic guide for future experiments to realize a new platform for flat band phenomena.

Current Status and Influencing Factors of Readiness for Discharge of Elderly Patients with Chronic Obstructive Pulmonary Disease.

Objective: Readiness for hospital discharge is an important indicator of patients' transition from illness to health and can predict rehabilitation and prognosis. Identifying factors that influence readiness for discharge is crucial for developing effective nursing interventions. Therefore, this study aims to investigate the current status of discharge readiness and its influencing factors in elderly patients with chronic obstructive pulmonary disease (COPD). Methods: A total of 311 elderly inpatients diagnosed with COPD were enrolled in this investigation at a tertiary hospital in Chengdu between December 2021 and June 2022. Questionnaires were designed to collect general information, disease-related information, and responses to the Readiness for Hospital Discharge Scale (RHDS) and the Quality of Discharge Teaching Scale (QDTS). Univariate and multivariate linear regression analyses were employed to further analyze factors related to discharge readiness and the correlation between discharge readiness and the quality of discharge guidance. Results: The total score of discharge readiness of elderly COPD patients was 77.72 ± 11.86 with a mean score of 6.48 ± 0.19 for each item. The quality of discharge instructions was 110.54 ± 15.66, with a mean score of 6.12 ± 0.15 for each item. Discharge preparation was positively correlated with the quality of discharge guidance. Multivariate analysis showed that marital status, admission mode, length of stay in hospital, Classification of Severity of Airflow Limitation, mMRC classification, number of medications taken with discharge, presence of inhalers in medication orders, mode of home oxygen therapy, and quality of discharge guidance were independent factors of discharge readiness in elderly COPD patients (P < 0.05). Conclusion: Both discharge readiness and the quality of discharge guidance for elderly COPD patients in China are currently suboptimal and need further improvement. The survey findings provide valuable insights that can guide future management practices and interventions aimed at improving discharge readiness.

The development of visual aesthetic sensitivity in students in China.

To examine the development of visual aesthetic sensitivity in students in China, 2,387 students from age 9 to age 22 (excluding ages 16-17) were tested by the Visual aesthetic Sensitivity Test-Revised. The development of visual aesthetic sensitivity across ages and genders, and the effect of artistic training on students' visual aesthetic sensitivity were examined. The data of primary school and junior middle school students were collected by paper tests completed collectively in class, while the data of university students were collected by distributing and collecting online. Result suggests that students' visual aesthetic sensitivity is relatively stable from age 9 to age 12 and increases at age 13. The visual aesthetic sensitivity of girls is significantly better than that of boys at age 15, 19, and 20 years of age. This study also found that artistic training improves students' visual aesthetic sensitivity.

Advances and applications of genetically modified pig models in biomedical and agricultural field.

Compared with rodents, pigs are closer to humans in terms of anatomy, metabolism and physiology, so they are ideal animal models of human diseases and xenotransplantation donors. In addition, as one of the most important livestock in China, pigs are closely related to our lives in terms of breeding improvement, disease prevention and animal welfare. In this review, we mainly summarize the research progress and future application of genetically modified pig models in the fields of xenotransplantation, molecular breeding and human disease models. We wish to take this opportunity to raise the awareness of researchers in related fields on cutting-edge technologies such as gene editing and understand the significance of genetically modified pig models in life science research.