Polyelectrolyte complexes of chitosan and hyaluronic acid or carboxymethylpullulan and their aminoguaiacol derivatives with biological activities as potential drug delivery systems.

Polyelectrolyte complexes (PECs) were elaborated from chitosan as cationic polymer and carboxy-methylpullulan (CMP), hyaluronic acid (HA) and their derivatives grafted with aminoguaiacol (G) with different degrees of substitution (DSGA) with the aim of obtaining nanogels for drug delivery. For each couple of polysaccharides, the charge ratios giving the smaller size with the lower PDI were selected to produce PECs. CMP_CHIT and CMP-G_CHIT PECs had smaller sizes (220-280 nm) than HA_CHIT and HA-G_CHIT PECs (280-390 nm). PECs were stable at 4 °C during 28 days at pH 5. In phosphate buffer saline (PBS) at pH 7.4, at 4 °C, a better stability of PECs based on CMP-G derivatives was observed. The hydrophobic associations between aminoguaiacol groups (highlighted by measurements of pyrene fluorescence) led to a better PECs' stabilization in PBS. The PECs' antioxidant and antibacterial activities were demonstrated and related to the DSGA. Diclofenac and curcumin were used as drug models: their loading reached 260 and 53 µg/mg PEC, respectively. The release of diclofenac in PBS at 37 °C followed a quasi-Fickian diffusion mechanism with release constant between 0.88 and 1.04 h-1. The curcumin release followed a slow linear increase in PBS/EtOH (60/40 V/V) with an effect of DSGA.

Injectable polyoxazoline grafted hyaluronic acid thermoresponsive hydrogels for biomedical applications.

Injectable thermosensitive hydrogels based on hyaluronic acid (HA) grafted with lower critical solution temperature (LCST) polyoxazoline (copolymers of poly(isopropyl-co-butyl oxazoline)) or P(iPrOx-co-BuOx) have been elaborated with tunable solution/gel temperature transitions and gel state elastic modulus. A suitable HA-g-P(iPrOx-co-BuOx-67/33)-0.10 sample with an iPrOx/BuOx ratio of 67/33, a polymerization degree (DP) of 25, a substitution degree (DS) of 10%, and displaying thermally induced gelling character with elastic (G') and viscous (G'') moduli crossover points at 25 °C and a G' at 37 °C around 80 Pa has been chosen for medical application. Hydrogels obtained with HA-g-P(iPrOx-co-BuOx-67/33)-0.10 exhibited high stability at 37 °C and excellent injectability properties with full and quick reversibility. The incorporation of a secondary network (HA), until 35 wt%, into the thermosensitive hydrogel also demonstrated very good stability and injectability.

Exopolysaccharide from marine microalgae belonging to the Glossomastix genus: fragile gel behavior and suspension stability.

With the aim to find new polysaccharides of rheological interest with innovated properties, rhamnofucans produced as exopolysaccharides (EPS) in a photobioreactor (PBR) and an airlift bioreactor (ABR) by the marine microalgae Glossomastix sp. RCC3707 and RCC3688 were fully studied. Chemical characterizations have been conducted (UHPLC - MS HR). Analyses by size-exclusion chromatography (SEC) coupled online with a multiangle light scattering detector (MALS) and a differential refractive index detector showed the presence of large structures with molar masses higher than 106 g.mol-1. The rheological studies of these EPS solutions, conducted at different concentrations and salinities, have evidenced interesting and rare behavior characteristic of weak and fragile hydrogels i.e. gel behavior with very low elastic moduli (between 10-2 and 10 Pa) and yield stresses (between 10-2 and 2 Pa) according to the EPS source, concentration, and salinity. These results were confirmed by diffusing wave spectroscopy. Finally, as one of potential application, solutions of EPS from Glossomastix sp. have evidenced very good properties as anti-settling stabilizers, using microcrystalline cellulose particles as model, studied by multiple light scattering (MLS) with utilization in cosmetic or food industry. Compared to alginate solution with same viscosity for which sedimentation is observed over few hours, microalgae EPS leads to a stable suspension over few days.

Lyophilization for Formulation Optimization of Drug-Loaded Thermoresponsive Polyelectrolyte Complex Nanogels from Functionalized Hyaluronic Acid.

The lyophilization of nanogels is practical not only for their long-term conservation but also for adjusting their concentration and dispersant type during reconstitution for different applications. However, lyophilization strategies must be adapted to each kind of nanoformulation in order to minimize aggregation after reconstitution. In this work, the effects of formulation aspects (i.e., charge ratio, polymer concentration, thermoresponsive grafts, polycation type, cryoprotectant type, and concentration) on particle integrity after lyophilization and reconstitution for different types of polyelectrolyte complex nanogels (PEC-NGs) from hyaluronic acid (HA) were investigated. The main objective was to find the best approach for freeze-drying thermoresponsive PEC-NGs from Jeffamine-M-2005-functionalized HA, which has recently been developed as a potential platform for drug delivery. It was found that freeze-drying PEC-NG suspensions prepared at a relatively low polymer concentration of 0.2 g.L-1 with 0.2% (m/v) trehalose as a cryoprotectant allow the homogeneous redispersion of PEC-NGs when concentrated at 1 g.L-1 upon reconstitution in PBS without important aggregation (i.e., average particle size remaining under 350 nm), which could be applied to concentrate curcumin (CUR)-loaded PEC-NGs for optimizing CUR content. The thermoresponsive release of CUR from such concentrated PEC-NGs was also reverified, which showed a minor effect of freeze-drying on the drug release profile.

Thermoresponsive nanogels based on polyelectrolyte complexes between polycations and functionalized hyaluronic acid.

A novel kind of thermoresponsive polyelectrolyte complex-based nanogels (PEC-NGs) was elaborated by mixing hyaluronic acid (HA) functionalized with Jeffamine® M-2005 (M2005, a thermoresponsive amine-terminated polyether) and diethylaminoethyl dextran (DEAE-D) or poly-l-lysine (PLL) in water. The presence of M2005 grafts led to PEC-NGs with larger particle size, lower net surface charge and thermoresponsiveness, namely shrinkage with increasing hydrophobicity at higher temperature. Both M2005 grafts and replacing DEAE-D with PLL as polycation allowed PEC-NGs to have higher stability against salinity and better encapsulation of curcumin, most probably through intraparticle hydrophobic interactions, whereas interparticle hydrophobic interactions may facilitate particle aggregation over time. Curcumin encapsulation can be optimized by applying higher temperature during the complexation. Enzymatic degradability of PEC-NGs was also verified through particle size evolution in the presence of hyaluronidase. These results provide new insights into the physicochemical aspect of such systems as promising nanocarriers for drug delivery.

Biosourced Polymeric Emulsifiers for Miniemulsion Copolymerization of Myrcene and Styrene: Toward Biobased Waterborne Latex as Pickering Emulsion Stabilizer.

Biobased waterborne latexes were synthesized by miniemulsion radical copolymerization of a biosourced ß-myrcene (My) terpenic monomer and styrene (S). Biobased amphiphilic copolymers were designed to act as stabilizers of the initial monomer droplets and the polymer colloids dispersed in the water phase. Two types of hydrophilic polymer backbones were hydrophobically modified by terpene molecules to synthesize two series of amphiphilic copolymers with various degrees of substitution. The first series consists of poly(acrylic acid) modified with tetrahydrogeraniol moieties (PAA-g-THG) and the second series is based on the polysaccharide carboxymethylpullulan amino-functionalized with dihydromyrcenol moieties (CMP-g-(NH-DHM)). The produced waterborne latexes with diameters between 160 and 300 nm and were composed of polymers with varying glass transition temperatures (Tg, PMy = -60 °C, Tg, P(My-co-S) = -14 °C, Tg, PS = 105 °C) depending on the molar fraction of biobased ß-myrcene (fMy,0 = 0, 0.43, or 1). The latexes successfully stabilized dodecane-in-water and water-in-dodecane emulsions for months at all compositions. The waterborne latexes composed of low Tg poly(ß-myrcene) caused interesting different behavior during drying of the emulsions compared to polystyrene latexes.

Hyaluronic Acid Functionalization with Jeffamine® M2005: A Comparison of the Thermo-Responsiveness Properties of the Hydrogel Obtained through Two Different Synthesis Routes.

Hyaluronic acid (HA) of different molar masses (respectively 38,000, 140,000 and 1,200,000 g.mol-1) have been functionalized with a commercial poly(etheramine), Jeffamine® M2005, in order to devise physical thermo-responsive hydrogels. Two routes have been studied, involving the use of either water for the first one or of N,N'-Dimethylformamide (DMF), a polar aprotic solvent, for the second one. In the case of the water route, the reaction was performed using a mixture of N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling reagents. The reaction was optimized while making sure no free M2005 remained in the final material, leading to M2005 grafting degrees of about 4%, which enabled the formation of hydrogels by increasing the temperature. In the case of the organic solvent route, propylphosphonic anhydride T3P® was used as a coupling reagent in DMF, resulting in a M2005 grafting degree of around 8% with better thermo-responsive properties of HA-g-M2005 compared to those obtained when the reaction was performed in water. However, the reaction systematically led to covalent cross-linking in the case of the HA, with the highest starting molar masses resulting in a very different rheological behaviour and with higher gel strength retaining thermo-responsive behaviour but being only poorly soluble in water.

Microgels Based on Carboxymethylpullulan Grafted with Ferulic Acid Obtained by Enzymatic Crosslinking in Emulsion for Drug Delivery Systems.

Carboxymethylpullulan (CMP) grafted with ferulic acid (FA) is crosslinked with laccase by the reverse water-in-oil emulsion technique (with sunflower oil) to obtain microgels with size from 40 to 200 µm. It is demonstrated that laccase activity and dispersion time have an impact on microgels' size. Fluorescence spectroscopy of different probes (e.g., pyrene, Nile red, and curcumin) shows the nonpolar characteristics of hydrophobic microdomains formed by the FA moieties and its dimers forming the crosslinking nodes. Encapsulation and release of curcumin or lidocaine used as drug models are studied in different buffers. Curcumin is well encapsulated but retained in microgels, while lidocaine is released at 65-70% in 2 h and 30 min in buffer simulating the gastrointestinal tract and at 75-85% in 1 h in acetate buffer pH 5.6 or phosphate-buffered saline (PBS) pH 6.9.

Biomimetic hydrogel by enzymatic crosslinking of pullulan grafted with ferulic acid.

A novel eco-friendly two-step synthesis process of neutral pullulan (PUL)-ferulic acid (FA) conjugates was reported in this work. Ferulic acid was first transformed to activated ferulate-imidazolide using N,N'-carbonyldiimidazole (CDI), a green activated reagent. Issued product was then reacted with pullulan. PUL-FA derivatives were characterized by FTIR and 1H NMR leading to substitution degrees (DS) between 0.02 and 0.1 (mol FA per mol PUL repeat unit). The study in dilute regime indicated an associative behavior with the presence of aggregate structures in solution due to the hydrophobic interactions between the grafted FA onto polysaccharide backbones. Laccase from Trametes versicolor was then used to crosslink polysaccharide chains to obtain biomimetic PUL-FA hydrogels. Gelling's kinetics were analyzed with rheology in dynamic mode showing the impact of laccase amount, DS and concentration. Mechanical and swelling properties appear related only to DS and concentration of PUL-FA products.

Antioxidant properties and bioactivity of Carboxymethylpullulan grafted with ferulic acid and of their hydrogels obtained by enzymatic reaction.

Antioxidant and cytocompatible chemically modified polysaccharides and their hydrogels were obtained by a biomimetic approach. For this purpose, carboxymethylpullulan grafted with ferulic acid (CMP-FA) was firstly synthesized with different substitution degrees (DSFA). Their hydrogels were secondly obtained by enzymatic cross-linking with laccase. Hydrogel swelling has been found dependent on both DSFA and media ionic strength. The CMP-FA antioxidant properties were evaluated by the DPPH method and ABTS assays. The DPPH radical scavenging effect was high for CMP-FA solutions (80% after 30 min) and lower for the corresponding hydrogels (70% after 7 h). The antibacterial properties of ferulic acid and CMP-FA derivatives were tested against Staphylococcus aureus but the minimal inhibitory concentration of CMP-FA was not reached in the range of concentrations studied. Finally the CMP-FA derivatives showed no cytotoxicity towards mouse fibroblast cells.

Carboxymethylpullulan Grafted with Aminoguaiacol: Synthesis, Characterization, and Assessment of Antibacterial and Antioxidant Properties.

Aminoguaiacol, the aminated derivative of guaiacol, a natural phenolic compound, was chemically grafted onto a polysaccharide (carboxymethylpullulan, CMP) in the presence of the activator agent 1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide hydrochloride (EDCI). The grafted polysaccharides were characterized by FTIR and 1H NMR spectroscopy to confirm and quantify the grafting. All polysaccharide derivatives (grafting rates of aminoguaiacol between 16% and 58%) were soluble in water. Their physicochemical properties were studied in a dilute regime and a semidilute regime by light scattering, fluorescence, and rheology, showing associative properties with peculiar polysoap behavior. The antibacterial activities of the synthesized products against Staphyloccocus aureus were assessed using a counting method. The antioxidant activities of the derivatives were also highlighted using the α,α-diphenyl-ß-picrylhydrazyl (DPPH) method. Finally, the cytotoxicity of the derivatives was studied with fibroblast cells and they showed a very good cytocompatibility. Such polymers could be used to replace chemical preservatives in food and cosmetic aqueous formulations.

Rheological study of in-situ crosslinkable hydrogels based on hyaluronanic acid, collagen and sericin.

The elaboration of chemically crosslinked hydrogels based on collagen (C), hyaluronanic acid (HA) and sericin (S) with different polymer ratios was investigated by in-situ rheology. This reaction was performed via amide or ester bond reaction activated by carbodiimide, in pure water. Prior to molecule crosslinking, the rheological behaviour of the biopolymers (alone or in mixture) was characterized in a semi-dilute concentration regime. Both flow and dynamic measurements showed that uncrosslinked collagen alone appears to be rather elastic with yield stress properties, whereas uncrosslinked HA alone appears to be rather shear thinning and viscoelastic in agreement with entangled polymer behaviour. Sericin exhibited Newtonian low viscosity behaviour according to its very low molar mass. Before crosslinking, HA exhibited viscoelastic behaviour at concentrations above the critical entangled concentration (C*) in the mixtures, thus HA shows promise as a matrix for future crosslinked networks, whereas sericin did not significantly modify the rheology. During the reaction, followed by rheology, the kinetics were slower for pure HA systems compared with the mixtures (i.e., with added collagen and/or to a lesser extent sericin). At the same time, the final network of hydrogels (i.e., the elastic modulus) was more structured in the mixture based systems. This result is explained by ester bonds (the only possibility for pure HA systems), which are less favourable and reactive than amide bonds (possible with sericin and collagen). The presence of collagen in the HA matrix reinforced the hydrogel network. SEM studies confirmed the structure of the hydrogels, and in vitro degradability was globally consistent with the effect of the selected enzyme according to the hydrogel composition. All the elaborated hydrogels were non-cytotoxic in vitro.

Enzymatic cross-linking of carboxymethylpullulan grafted with ferulic acid.

Carboxymethylpullulan (CMP) has been modified in a two-step grafting reaction of ferulic acid (FA). Acid adipic dihydrazyde (ADH) was first reacted with FA activated with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC). Then the product of this first reaction was reacted with CMP (activated with EDC). Grafted polysaccharides structure was confirmed by FTIR and (1)H NMR spectroscopy. Analyses by size-exclusion chromatography (SEC) coupling on-line with a multi-angle light scattering detector (MALS), a viscometer and a differential refractive index detector (DRI) (SEC/MALS/DRI/Visco) showed that associations between FA moieties occurred due to hydrophobic interactions. The grafting rates of FA were determined by the Folin-Ciocalteu method and were found between 1.0% and 11.2% (mol/mol anhydroglucose unit). The CMP-FA were then enzymatically cross-linked with laccase from Pleurotus ostreatus. The crosslinking reactions were followed by rheological measurements, demonstrating the influence of laccase concentration on kinetics. Elastic modulus and swelling rates of hydrogels depends on FA content only for low values.

Thermo-controlled rheology of electro-assembled polyanionic polysaccharide (alginate) and polycationic thermo-sensitive polymers.

Several thermo-sensitive polyelectrolyte complexes were prepared by ionic self-association between an anionic polysaccharide (alginate) and a monocationic copolymer (polyether amine, Jeffamine®-M2005) with a 'Low Critical Solubility Temperature' (LCST). We show that electro-association must be established below the aggregation temperature of the free Jeffamine®, after which the organization of the system is controlled by the thermo-association of Jeffamine® that was previously electro-associated with the alginate. Evidence for this comes primarily from the rheology in the semi-dilute region. Electro- and thermo-associative behaviours are optimal at a pH corresponding to maximum ionization of both compounds (around pH 7). High ionic strength could prevent the electro-association. The reversibility of the transition is possible only at temperatures lower than the LCST of Jeffamine®. Similar behaviour has been obtained with carboxymethyl cellulose (CMC), which suggests that this behaviour can be observed using a range of anionic polyelectrolytes. In contrast, no specific properties have been found for pullulan, which is a neutral polysaccharide.

Crosslinked hydrogels based on biological macromolecules with potential use in skin tissue engineering.

Zero-length crosslinked hydrogels have been synthesized by covalent linking of three natural polymers (collagen, hyaluronic acid and sericin), in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide. The hydrogels have been investigated by FT-IR spectroscopy, microcalorimetry, in vitro swelling, enzymatic degradation, and in vitro cell viability studies. The obtained crosslinked hydrogels showed a macroporous structure, high swelling degree and in vitro enzymatic resistance compared to uncrosslinked collagen. The in vitro cell viability studies performed on normal human dermal fibroblasts assessed the sericin proliferation properties indicating a potential use of the hydrogels based on collagen, hyaluronic acid and sericin in skin tissue engineering.

Covalent immobilization of pullulanase on alginate and study of its hydrolysis of pullulan.

The immobilization of pullulanase from Klebsiella pneumoniae by grafting was investigated. Pullulanase was linked after activation of alginate via a covalent bond between the amine groups of the enzyme and the carboxylic acid groups of alginate. The immobilization yield was 60%. The activity of free pullulanase and immobilized pullulanase was followed by the quantification of reducing ends by colorimetric assay and the determination of the molar masses of the hydrolyzed pullulan by SEC/MALS/DRI. Compared to free pullulanase, the kinetics is largely slowed. The evolution of the weight average molar mass of pullulan leading to high production of shorter oligosaccharides during hydrolysis is not the same as that obtained with free enzyme. Immobilized pullulanase retained 75% and 30% of its initial activity after 24 h and 14 days of incubation at 60°C, respectively while free pullulanase lost its activity after 5 h of hydrolysis at the same temperature. The kinetic parameters of immobilized pullulanase were also investigated by isothermal titration calorimetry (ITC). The affinity of immobilized enzyme to its substrate was reduced compared to the free pullulanase due to steric hindrance and chemical links.

Two methods for one-point anchoring of a linear polysaccharide on a gold surface.

Two strategies to achieve a one-point anchoring of a hydrolyzed pullulan (P9000) on a gold surface are compared. The first strategy consists of forming a self-assembled monolayer of a 6-amino-1-hexanethiol (AHT) and then achieving reductive amination on the surface between the aminated surface and the aldehyde of the polysaccharide reductive end sugar. The second consists of incorporating a thiol function at the extremity of the pullulan (via the same reductive amination), leading to P9000-AHT and then immobilizing it on gold by a spontaneous reaction between solid gold and thiol. The modified pullulan was characterized by NMR and size-exclusion chromatography coupled to a light-scattering detector. P9000-AHT appears to be in a disulfide dimer form in solution but recovers its unimer form with dithiothreitol (DTT) treatment. The comparison of the two strategies by contact angle and XPS revealed that the second strategy is more efficient for the pullulan one-point anchoring. P9000-AHT even in its dimer form is easily grafted onto the surface. The grafted polymer seems to be more in a coil conformation than in a rigid brush. Furthermore, QCM measurements highlighted that the second strategy leads to a grafting density of around 3.5 × 10(13) molecules·cm(-2) corresponding to a high surface coverage. The elaboration of a dense and oriented layer of polysaccharides covalently linked to a gold surface might enhance the use of such modified polysaccharides in various fields.

Organization of "Pullulan"-block-polyether copolymers at the aqueous solution/air interface.

Interfacial behavior of a thermosensitive homologous series of linear copolymers based on polyetheramine (commercially named Jeffamine® M2005) and on pullulan is investigated. The influence of the polysaccharide block length has been significantly highlighted on the copolymer structuring at the aqueous solution/air interface. Indeed, these systems induce a decrease in the surface tension depending on the pullulan length. To highlight the impact of the pullulan length in such a series at the aqueous solution/air interface, the interfacial rheological measurement and the transferred Gibbs films of these systems have been studied. The storage modulus of the adsorption layers and the Gibbs film thickness increase along with the length of pullulan in the block, probably because of a structuring effect in the subphase and to an entanglement effect of the pullulan chains under the interface. Moreover, the results obtained through the transferred Gibbs films backup those obtained by the surface tension and the interfacial rheological measurements.

Influence of polyelectrolyte film stiffness on bacterial growth.

Photo-cross-linkable polyelectrolyte films, whose nanomechanical properties can be varied under UV light illumination, were prepared from poly(l-lysine) (PLL) and a hyaluronan derivative modified with photoreactive vinylbenzyl groups (HAVB). The adhesion and the growth of two model bacteria, namely Escherichia coli and Lactococcus lactis , were studied on non-cross-linked and cross-linked films to investigate how the film stiffness influences the bacterial behavior. While the Gram positive L. lactis was shown to grow slowly on both films, independently of their rigidity, the Gram negative E. coli exhibited a more rapid growth on non-cross-linked softer films compared to the stiffer ones. Experiments performed on photopatterned films showing both soft and stiff regions, confirmed a faster development of E. coli colonies on softer regions. Interestingly, this behavior is opposite to the one reported before for mammalian cells. Therefore, the photo-cross-linked (PLL/HAVB) films are interesting coatings for tissue engineering since they promote the growth of mammalian cells while limiting the bacterial colonization.

Survival of cord blood haematopoietic stem cells in a hyaluronan hydrogel for ex vivo biomimicry.

Haematopoietic stem cells (HSCs) and haematopoietic progenitor cells (HPCs) grow in a specified niche in close association with the microenvironment, the so-called 'haematopoietic niche'. Scaffolds have been introduced to overcome the liquid culture limitations, mimicking the presence of the extracellular matrix (ECM). In the present study the hyaluronic acid scaffold, already developed in the laboratory, has been used for the first time to maintain long-term cultures of CD34⁺ haematopoietic cells obtained from human cord blood. One parameter investigated was the impact on ex vivo survival of CD34⁺ cord blood cells (CBCs) on the hyaluronic acid surface, immobilized with peptides containing the RGD motif. This peptide was conjugated by coating the hyaluronan hydrogel and cultured in serum-free liquid phase complemented with stem cell factor (SCF), a commonly indispensable cytokine for haematopoiesis. Our work demonstrated that these hyaluronan hydrogels were superior to traditional liquid cultures by maintaining and expanding the HPCs without the need for additional cytokines, and a colonization of 280-fold increment in the hydrogel compared with liquid culture after 28 days of ex vivo expansion.