RESUMO
Multi-functional nanoparticle thin films are being used in various applications ranging from biosensing to photo-voltaics. In this study, we integrate two different numerical approaches to understand the interplay between the mechanical deformation and optical response of polymer grafted plasmonic nanoparticle (PGPN) arrays. Using numerical simulations we examine the deformation of thin films formed by end-functionalised polymer grafted nanoparticles subject to uniaxial elongation. The induced deformation causes the particles in the thin film network to rearrange their positions by two different mechanisms viz. sliding and packing. In sliding, the particles move in the direction of induced deformation. On the other hand, in packing, the particles move in a direction normal to that of the induced deformation. By employing a Green's tensor formulation in polarizable backgrounds for evaluating the optical response of the nanoparticle network, we calculate the evolution of the plasmonic response of the structure as a function of strain. The results indicate that the evolution of plasmonic response closely follows the deformation. In particular, we show that the onset of relative electric field enhancement of the optical response occurs when there is significant rearrangement of the constituent PGPNs in the array. Furthermore, we show that depending on the local packing/sliding and the polarization of the incident light there can be both enhancement and suppression of the SERS response.
RESUMO
Surface-enhanced Raman spectroscopy (SERS) has been effectively used in biosensing applications due to its high sensitivity and specificity. Enhancing the coupling of light into plasmonic nanostructures can lead to engineered SERS substrates with improved sensitivity and performance. In the current study, we demonstrate a cavity-coupled structure that assists in enhancing the light-matter interaction leading to an improved SERS performance. Using numerical simulations, we demonstrate that the cavity-coupled structures can either enhance or suppress the SERS signal depending on the cavity length and the wavelength of interest. Furthermore, the proposed substrates are fabricated using low-cost large-area techniques. The cavity-coupled plasmonic substrate consists of a layer of gold nanospheres on an indium tin oxide (ITO)-Au-glass substrate. The fabricated substrates exhibit nearly a 9 times improvement in SERS enhancement as compared to the uncoupled substrate. The demonstrated cavity-coupling approach can also be used for enhancing other plasmonic phenomena like plasmonic trapping, plasmon-enhanced catalysis, and nonlinear signal generation.
RESUMO
The controlled assembly of plasmonic nanoparticles is vital for realizing low-cost, high efficiency plasmonic substrates with tunable resonances. Here, we present a strategy to assemble gold nanoparticles (AuNPs) in resonant gold nanoapertures (NAs) to enable coupling-mediated near-field enhancement. The NAs templates are fabricated using shadow sphere lithography on polyelectrolyte (PE) coated substrates. Subsequently, AuNPs are assembled in the resonant NA templates via a simple immersion step. The PE layer, AuNP concentration, NaCl concentration, incubation time, and template thickness are used to control the particle number per aperture and the interparticle distance of the AuNP assemblies. The fabricated AuNP-NA substrates are evaluated for their SERS potential using 4-Mercaptobenzoic acid (MBA) as a Raman reporter molecule. The SERS intensity of the AuNP-NA templates can be enhanced by ten times by controlling the AuNP and NA template parameters as compared to the bare NA templates. Numerical simulations show that the coupling between the various plasmonic modes is crucial for this SERS enhancement. The proposed strategy can be used to fabricate hybrid AuNP-NA based SERS substrates with improved sensitivity.
RESUMO
Development of insect resistance to biopesticides is a current and pertinent global issue. Earlier, it was established that lepidopteran larvae can recover from Bt intoxication via a midgut regenerative response and subsequently generate resistance. Molecular aspects of restoration of the midgut integrity following toxin exposure are emerging recently. In the present study, we bring out the pivotal role of gut arylphorin in mediating the midgut regenerative response following sublethal Bt exposure in Achaea janata. Bt-induced midgut damage was characterized by microscopic analysis using differential interference contrast (DIC) and immunofluorescence (IF). Extensive disruption of brush-border membrane, associated with the underlying cytoskeletal alterations including F-actin, α-actin and ß-tubulin was observed. Single-photon fluorescence microscopy combined with fluorescence lifetime imaging (FLIM) established the metabolic state associated with enhanced stem cell proliferation and migration from the basal side towards the luminal side following the damage. In-silico analysis revealed the phylogenetic relationship of gut arylphorin with closely related insect species and indicated the presence of two different subunits. Transient RNAi knockdown of the arylphorin resulted in diminished expression of mitotic Cyclin B mRNA levels. Human monoclonal Cyclin B antibody cross-reactivity with the Cyclin B located in the stem cells further validate the role of arylphorin as the mitogenic factor responsible for stem cell proliferation and epithelial regeneration. An in-depth understanding of resistance mechanisms will aid in the design of new strategies for the long-term usage and efficacy of Bt technology against pest control.
Assuntos
Toxinas de Bacillus thuringiensis/toxicidade , Proteínas de Insetos/metabolismo , Intestinos , Mariposas/metabolismo , Animais , Bacillus thuringiensisRESUMO
Spectral cytopathology (SCP) is a promising label-free technique for diagnosing diseases and monitoring therapeutic outcomes using FTIR spectroscopy. In most cases, cells must be immobilized on a substrate prior to spectroscopic interrogation. This creates significant limitations for high throughput phenotypic whole-cell analysis, especially for the non-adherent cells. Here we demonstrate how metasurface-enhanced infrared reflection spectroscopy (MEIRS) can be applied to a continuous flow of live cell solution by applying AC voltage to metallic metasurfaces. By integrating metasurfaces with microfluidic delivery channels and attracting the cells to the metasurface via dielectrophoretic (DEP) force, we collect the infrared spectra of cells in real time within a minute, and correlate the spectra with simultaneously acquired images of the attracted cells. The resulting DEP-MEIRS technique paves the way for rapid SCP of complex cell-containing body fluids with low cell concentrations, and for the development of a wide range of label-free liquid biopsies.
Assuntos
Eletricidade , Espectrofotometria Infravermelho , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Plasmonic metasurfaces have been employed for moulding the flow of transmitted and reflected light, thereby enabling numerous applications that benefit from their ultra-thin sub-wavelength format. Their appeal is further enhanced by the incorporation of active electro-optic elements, paving the way for dynamic control of light's properties. In this paper, we realize a dynamic polarization state generator using a graphene-integrated anisotropic metasurface (GIAM) that converts the linear polarization of the incident light into an elliptical one. This is accomplished by using an anisotropic metasurface with two principal polarization axes, one of which possesses a Fano-type resonance. A gate-controlled single-layer graphene integrated with the metasurface was employed as an electro-optic element controlling the phase and intensity of light polarized along the resonant axis of the GIAM. When the incident light is polarized at an angle to the resonant axis of the metasurface, the ellipticity of the reflected light can be dynamically controlled by the application of a gate voltage. Thus accomplished dynamic polarization control is experimentally demonstrated and characterized by measuring the Stokes polarization parameters. Large changes of the ellipticity and the tilt angle of the polarization ellipse are observed. Our measurements show that the tilt angle can be changed from positive values through zero to negative values while keeping the ellipticity constant, potentially paving the way to rapid ellipsometry and other characterization techniques requiring fast polarization shifting.This article is part of the themed issue 'New horizons for nanophotonics'.
RESUMO
Strong interaction of graphene with light accounts for one of its most remarkable properties: the ability to absorb 2.3% of the incident light's energy within a single atomic layer. Free carrier injection via field-effect gating can dramatically vary the optical properties of graphene, thereby enabling fast graphene-based modulators of the light intensity. However, the very thinness of graphene makes it difficult to modulate the other fundamental property of the light wave: its optical phase. Here we demonstrate that considerable phase control can be achieved by integrating a single-layer graphene (SLG) with a resonant plasmonic metasurface that contains nanoscale gaps. By concentrating the light intensity inside of the nanogaps, the metasurface dramatically increases the coupling of light to the SLG and enables control of the phase of the reflected mid-infrared light by as much as 55° via field-effect gating. We experimentally demonstrate graphene-based phase modulators that maintain the amplitude of the reflected light essentially constant over most of the phase tuning range. Rapid nonmechanical phase modulation enables a new experimental technique, graphene-based laser interferometry, which we use to demonstrate motion detection with nanoscale precision. We also demonstrate that by the judicious choice of a strongly anisotropic metasurface the graphene-controlled phase shift of light can be rendered polarization-dependent. Using the experimentally measured phases for the two orthogonal polarizations, we demonstrate that the polarization state of the reflected light can be by modulated by carrier injection into the SLG. These results pave the way for novel high-speed graphene-based optical devices and sensors such as polarimeters, ellipsometers, and frequency modulators.
RESUMO
Using full-wafer processing, we demonstrate a sophisticated nanotechnology for the realization of an ultrahigh sensitive cavity-coupled plasmonic device that combines the advantages of Fabry-Perot microcavities with those of metallic nanostructures. Coupling the plasmonic nanostructures to a Fabry-Perot microcavity creates compound modes, which have the characteristics of both Fabry-Perot and localized surface plasmon resonance (LSPR) modes, boosting the sensitivity and figure-of-merit of the structure. The significant trait of the proposed device is that the sample to be measured is located in the substrate region and is probed by the compound modes. It is demonstrated that the sensitivity of the compound modes is much higher than that of LSPR of plasmonic nanostructures or the pure Fabry-Perot modes of the optical microcavity. The response of the device is also investigated numerically and the agreement between measurements and calculations is excellent. The key features of the device introduced in this work are applicable for the realization of ultrahigh sensitive plasmonic devices for biosensing, optoelectronics, and related technologies.
Assuntos
Técnicas Biossensoriais/instrumentação , Nanoestruturas/química , Ressonância de Plasmônio de Superfície/instrumentação , Dispositivos Ópticos , Sensibilidade e EspecificidadeRESUMO
The far-field polarization of the optical response of a plasmonic antenna can be tuned by subtly engineering of its geometry. In this paper, we develop design rules for nano antennas which enable the generation of circular polarized light via the excitation of circular plasmonic modes in the structure. Two initially orthogonal plasmonic modes are coupled in such a way that a rotational current is excited in the structure. Modifying this coupling strength from a weak to a strong regime controls the helicity of the scattered field. Finally, we introduce an original sensing approach that relies on the rotation of the incident polarization and demonstrates a sensitivity of 0.23 deg·nm(-1) or 33 deg·RIU(-1), related to changes of mechanical dimensions and the refractive index, respectively.
Assuntos
Nanotecnologia , Óptica e Fotônica , Ressonância de Plasmônio de Superfície , Luz , Espalhamento de RadiaçãoRESUMO
We show bending of light on the same side of the normal in a free-standing corrugated metal film under bidirectional illumination. Coherent perfect absorption (CPA) is exploited to suppress the specular zeroth order leading to effective back-bending of light into the "-1" order, while the "+1" order is resonant with the surface mode. The effect is shown to be phase sensitive, yielding CPA and superscattering in the same geometry.
RESUMO
We exploit the versatility provided by metal-dielectric composites to demonstrate controllable coherent perfect absorption (CPA) or anti-lasing in a slab of heterogeneous medium. The slab is illuminated by coherent light from both sides, at the same angle of incidence and the conditions required for CPA are investigated as a function of the different system parameters. Our calculations clearly elucidate the role of absorption as a necessary prerequisite for CPA. We further demonstrate the controllability of the CPA frequency to the extent of having the same at two distinct frequencies even in presence of dispersion, rendering the realization of anti-lasers more flexible.