Surface-Bioengineered Extracellular Vesicles Seeking Molecular Biotargets in Lung Cancer Cells.

Personalized medicine is a new approach to modern oncology. Here, to facilitate the application of extracellular vesicles (EVs) derived from lung cancer cells as potent advanced therapy medicinal products in lung cancer, the EV membrane was functionalized with a specific ligand for targeting purposes. In this role, the most effective heptapeptide in binding to lung cancer cells (PTHTRWA) was used. The functionalization process of EV surface was performed through the C- or N-terminal end of the heptapeptide. To prove the activity of the EVs functionalized with PTHTRWA, both a model of lipid membrane mimicking normal and cancerous cell membranes as well as human adenocarcinomic alveolar basal epithelial cells (A549) and human normal bronchial epithelial cells (BEAS-2B) have been exposed to these bioconstructs. Magnetic resonance imaging (MRI) showed that the as-bioengineered PTHTRWA-EVs loaded with superparamagnetic iron oxide nanoparticle (SPIO) cargos reach the growing tumor when dosed intravenously in NUDE Balb/c mice bearing A549 cancer. Molecular dynamics (MD) in silico studies elucidated a high affinity of the synthesized peptide to the α5ß1 integrin. Preclinical safety assays did not evidence any cytotoxic or genotoxic effects of the PTHTRWA-bioengineered EVs.

Stimuli-Responsive Oligourea Molecular Films.

We have designed and synthesized a helical cysteamine-terminated oligourea foldamer composed of ten urea residues featuring side carboxyl and amine groups. The carboxyl group is located in proximity to the C-terminus of the oligourea and hence at the negative pole of the helix dipole. The amine group is located close to the N-terminus and hence at the positive pole of the helix dipole. Beyond the already remarkable dipole moment inherent in oligourea 2.5 helices, the incorporation of additional charges originating from the carboxylic and amine groups is supposed to impact the overall charge distribution along the molecule. These molecules were self-assembled into monolayers on a gold substrate, allowing us to investigate the influence of an electric field on these polar helices. By applying surface-enhanced infrared reflection-absorption spectroscopy, we proved that molecules within the monolayers tend to reorient themselves more vertically when a negative bias is applied to the surface. It was also found that surface-confined oligourea molecules affected by the external electric field tend to rearrange the electron density at urea groups, leading to the stabilization of the resonance structure with charge transfer character. The presence of the external electric field also affected the nanomechanical properties of the oligourea films, suggesting that molecules also tend to reorient in the ambient environment without an electrolyte solution. Under the same conditions, the helical oligourea displayed a robust piezoresponse, particularly noteworthy given the slender thickness of the monolayer, which measured approximately 1.2 nm. This observation demonstrates that thin molecular films composed of oligoureas may exhibit stimulus-responsive properties. This, in turn, may be used in nanotechnology systems as actuators or functional films, enabling precise control of their thickness in the range of even fractions of nanometers.

Sparsely tethered bilayer lipid membranes formed by self-assembly of bicelles: Spectroelectrochemical characterization and incorporation of transmembrane protein.

Many biochemical processes related to proper homeostasis take place in cell membranes. The key molecules involved in these processes are proteins, including transmembrane proteins. These macromolecules still challenge the understanding of their function within the membrane. Biomimetic models that mimic the properties of the cell membrane can help understand their functionality. Unfortunately, preserving the native protein structure in such systems is problematic. A possible solution to this problem involves the use of bicelles. Their unique properties make integrating bicelles with transmembrane proteins manageable while preserving their native structure. Hitherto, bicelles have not been used as precursors for protein-hosting lipid membranes deposited on solid substrates like pre-modified gold. Here, we demonstrated that bicelles can be self-assembled to form sparsely tethered bilayer lipid membranes and the properties of the resulting membrane satisfy the conditions suitable for transmembrane protein insertion. We showed that the incorporation of α-hemolysin toxin in the lipid membrane leads to a decrease in membrane resistance due to pore formation. Simultaneously, the insertion of the protein causes a drop in the capacitance of the membrane-modified electrode, which can be explained by the dehydration of the polar region of the lipid bilayer and the loss of water from the submembrane region.

Surface-Enhanced Infrared Absorption Spectroscopy (SEIRAS) to Probe Interfacial Water in Floating Bilayer Lipid Membranes (fBLMs).

Floating bilayer lipid membranes (fBLMs) immobilized on metallic surfaces provide a convenient model mimicking the cell membranes due to the effective hydration of lipid polar heads in a proximal leaflet and the possibility to generate the potential gradient across the membrane. This chapter describes the protocol for the measurement of interfacial water separating the floating bilayer lipid membrane from the solid support using surface-enhanced infrared absorption spectroscopy (SEIRAS) under electrochemical control.

Properties of electrode-supported lipid cubic mesophase films with embedded gramicidin A: structure and ion-transport studies.

The lipid cubic phase (LCP) is a nanomaterial composed of water channels surrounded by lipid bilayers. LCPs are stable at room temperature and are biocompatible. These features make the lipid cubic phases similar to biological membranes, and hence, are favorable for embedding membrane proteins. We show that the monoolein cubic phase deposited on the electrode forms a 3D lipid bilayer film convenient for electrochemical investigations of membrane proteins. In this research, we studied the effect of embedding an ionophoric peptide, gramicidin A (gA), on the structure and properties of the LCP film. The phase identity and structural parameters of the gramicidin-doped phase were characterized by small-angle X-ray scattering (SAXS). The potassium ion transport through the film were studied by electroanalytical methods: alternating current voltammetry (ACV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). Increased values for the current of the gramicidin-doped cubic phase compared to the empty cubic phase and changes of the EIS parameters confirmed that the peptide remained in the film in its active dimeric form. Our results show that the LCP can be considered a suitable 3D biomimetic film for the investigation of ion channels and other transporting membrane proteins, and for their application in electrochemical sensors.

Influence of lipophilicity of anthracyclines on the interactions with cholesterol in the model cell membranes - Langmuir monolayer and SEIRAS studies.

The interactions of anthracyclines with biological membranes strongly depend on the drug lipophilicity, which might also determine the specific affinity to cholesterol molecules. Therefore, in this work we show the studies concerning the effect of two selected anthracyclines, daunorubicin (DNR) and idarubicin (IDA) on simple models of healthy (DMPC:Chol 7:3) and cancer cells membranes with increased level of cholesterol (DMPC:Chol 3:7) as well as pure cholesterol monolayers prepared at the air-water interface and supported on gold surface. It has been shown that more lipophilic IDA is able to penetrate cholesterol monolayers more effectively than DNR due to the formation of IDA-cholesterol arrangements at the interface, as proved by the thermodynamic analysis of compression-expansion cycles. The increased interactions of IDA were also confirmed by the time measurements of pre-compressed monolayers exposed to drug solutions as well as grazing incidence X-ray diffraction studies demonstrating differences in the 2D organization of cholesterol monolayers. Langmuir studies of mixed DMPC:Chol membranes revealed the reorganization of molecules in the cancer cell models at the air-water interface at higher surface pressures due to the removal of DNR, while increased affinity of IDA towards cholesterol allowed this drug to penetrate the layer more efficiently without its removal. The SEIRAS spectra obtained for supported DMPC:Chol bilayers proved that IDA locates both in the ester group and in the acyl chain region of the bilayer, while DNR does not penetrate the membranes as deeply as IDA. The increased penetration of the mixed phospholipid layers by idarubicin might be attributed to the higher lipophilicity caused by the lack of methoxy group and resulting in a specific affinity towards cholesterol.

Designing a Useful Lipid Raft Model Membrane for Electrochemical and Surface Analytical Studies.

A model biomimetic system for the study of protein reconstitution or drug interactions should include lipid rafts in the mixed lipid monolayer, since they are usually the domains embedding membrane proteins and peptides. Four model lipid films composed of three components: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), cholesterol (Chol) and sphingomyelin (SM) mixed in different molar ratios were proposed and investigated using surface pressure measurements and thermodynamic analysis of the monolayers at the air-water interface and imaged by Brewster angle microscopy. The ternary monolayers were transferred from the air-water onto the gold electrodes to form bilayer films and were studied for the first time by electrochemical methods: alternative current voltammetry and electrochemical impedance spectroscopy and imaged by atomic force microscopy. In excess of DOPC, the ternary systems remained too liquid for the raft region to be stable, while in the excess of cholesterol the layers were too solid. The layers with SM in excess lead to the formation of Chol:SM complexes but the amount of the fluid matrix was very low. The equimolar content of the three components lead to the formation of a stable and well-organized assembly with well-developed raft microdomains of larger thickness, surrounded by the more fluid part of the bilayer. The latter is proposed as a convenient raft model membrane for further physicochemical studies of interactions with drugs or pollutants or incorporation of membrane proteins.

Electrochemical Properties of Lipid Membranes Self-Assembled from Bicelles.

Supported lipid membranes are widely used platforms which serve as simplified models of cell membranes. Among numerous methods used for preparation of planar lipid films, self-assembly of bicelles appears to be promising strategy. Therefore, in this paper we have examined the mechanism of formation and the electrochemical properties of lipid films deposited onto thioglucose-modified gold electrodes from bicellar mixtures. It was found that adsorption of the bicelles occurs by replacement of interfacial water and it leads to formation of a double bilayer structure on the electrode surface. The resulting lipid assembly contains numerous defects and pinholes which affect the permeability of the membrane for ions and water. Significant improvement in morphology and electrochemical characteristics is achieved upon freeze-thaw treatment of the deposited membrane. The lipid assembly is rearranged to single bilayer configuration with locally occurring patches of the second bilayer, and the number of pinholes is substantially decreased. Electrochemical characterization of the lipid membrane after freeze-thaw treatment demonstrated that its permeability for ions and water is significantly reduced, which was manifested by the relatively high value of the membrane resistance.

Physicochemical Characterization of Daptomycin Interaction with Negatively Charged Lipid Membranes.

Daptomycin is known as an effective antibiotic lipopeptide which shows activity against the number of Gram-positive pathogens. Its primary target is the bacterial cell membrane. However, the detailed mechanism of daptomycin action is still subject to debate. In this paper, we have investigated the interactions between lipopeptide and model lipid films composed of negatively charged phosphatidylglycerols and cardiolipin. In order to evaluate the effect of daptomycin on the molecular organization and the properties of lipid assemblies, we have used surface pressure measurements and electrochemical methods combined with atomic force microscopy, quartz crystal microbalance, and surface-enhanced infrared absorption spectroscopy. Our results indicate that daptomycin interaction with the lipid membrane is complex. It involves daptomycin aggregation and partial insertion, which in turn affect the charge distribution on both sides of the membrane and may result in a gradient of water chemical potential. The latter can drive the flux of water across the membrane.