3D printed plates based on generative design biomechanically outperform manual digital fitting and conventional systems printed in photopolymers in bridging mandibular bone defects of critical size in dogs.

Conventional plate osteosynthesis of critical-sized bone defects in canine mandibles can fail to restore former functionality and stability due to adaption limits. Three-dimensional (3D) printed patient-specific implants are becoming increasingly popular as these can be customized to avoid critical structures, achieve perfect alignment to individual bone contours, and may provide better stability. Using a 3D surface model for the mandible, four plate designs were created and evaluated for their properties to stabilize a defined 30 mm critical-size bone defect. Design-1 was manually designed, and further shape optimized using Autodesk ® Fusion 360 (ADF360) and finite element analysis (FE) to generate Design-2. Design-4 was created with the generative design (GD) function from ADF360 using preplaced screw terminals and loading conditions as boundaries. A 12-hole reconstruction titanium locking plate (LP) (2.4/3.0 mm) was also tested, which was scanned, converted to a STL file and 3D printed (Design-3). Each design was 3D printed from a photopolymer resin (VPW) and a photopolymer resin in combination with a thermoplastic elastomer (VPWT) and loaded in cantilever bending using a customized servo-hydraulic mechanical testing system; n = 5 repetitions each. No material defects pre- or post-failure testing were found in the printed mandibles and screws. Plate fractures were most often observed in similar locations, depending on the design. Design-4 has 2.8-3.6 times ultimate strength compared to other plates, even though only 40% more volume was used. Maximum load capacities did not differ significantly from those of the other three designs. All plate types, except D3, were 35% stronger when made of VPW, compared to VPWT. VPWT D3 plates were only 6% stronger. Generative design is faster and easier to handle than optimizing manually designed plates using FE to create customized implants with maximum load-bearing capacity and minimum material requirements. Although guidelines for selecting appropriate outcomes and subsequent refinements to the optimized design are still needed, this may represent a straightforward approach to implementing additive manufacturing in individualized surgical care. The aim of this work is to analyze different design techniques, which can later be used for the development of implants made of biocompatible materials.

Management of Suspected Cases of Feline Immunodeficiency Virus Infection in Eurasian Lynx (Lynx lynx) During an International Translocation Program.

The Eurasian lynx (Lynx lynx) population in Switzerland serves as a source for reintroductions in neighboring countries. In 2016-2017, three lynx from the same geographical area were found seropositive for feline immunodeficiency virus (FIV) in the framework of an international translocation program. This novel finding raised questions about the virus origin and pathogenicity to lynx, the emerging character of the infection, and the interpretation of serological results in other lynx caught for translocation. Archived serum samples from 84 lynx captured in 2001-2016 were retrospectively tested for FIV antibodies by Western blot. All archived samples were FIV-negative. The three seropositive lynx were monitored in quarantine enclosures prior to euthanasia and necropsy. They showed disease signs, pathological findings, and occurrence of co-infections reminding of those described in FIV-infected domestic cats. All attempts to isolate and characterize the virus failed but serological data and spatiotemporal proximity of the cases suggested emergence of a lentivirus with antigenic and pathogenic similarities to FIV in the Swiss lynx population. A decision scheme was developed to minimize potential health risks posed by FIV infection, both in the recipient and source lynx populations, considering conservation goals, animal welfare, and the limited action range resulting from local human conflicts. Development and implementation of a cautious decision scheme was particularly challenging because FIV pathogenic potential in lynx was unclear, negative FIV serological results obtained within the first weeks after infection are unpredictable, and neither euthanasia nor repatriation of multiple lynx was acceptable options. The proposed scheme distinguished between three scenarios: release at the capture site, translocation, or euthanasia. Until April 2021, none of the 40 lynx newly captured in Switzerland tested FIV-seropositive. Altogether, seropositivity to FIV was documented in none of 124 lynx tested at their first capture, but three of them seroconverted in 2016-2017. Diagnosis of FIV infection in the three seropositive lynx remains uncertain, but clinical observations and pathological findings confirmed that euthanasia was appropriate. Our experiences underline the necessity to include FIV in pathogen screenings of free-ranging European wild felids, the importance of lynx health monitoring, and the usefulness of health protocols in wildlife translocation.

Diagnostic Yield of Micro-Computed Tomography (micro-CT) Versus Histopathology of a Canine Oral Fibrosarcoma.

Micro-computed tomography (micro-CT) imaging currently gains increased interest in human as well as veterinary medicine. The ability to image 3-dimensional (3D) biopsy specimens nondestructively down to 1 µm spatial resolution makes it a promising tool for microscopic tissue evaluation in addition to histopathology. Visualizing tumor margins and calculating tumor load on 3D reconstructions may also enhance oncological therapies. The objective of this study was to describe the workflow from tumor resection to histopathological diagnosis, using both routine hematoxylin-eosin (HE)-stained sections and micro-CT tomograms on a stage II oral fibrosarcoma in a 7-year-old Hovawart dog. The maxillectomy specimen was fixed with formalin and stained with an X-ray dense soft tissue contrast agent. Micro-CT imaging was done using an ex vivo specimen micro-CT device. Tumor margins could not be exactly determined on micro-CT tomograms due to limited image resolution and contrast. Histopathology was performed after washing out the contrast agent. It showed neoplastic cells infiltrating the surrounding tissue further than assumed from micro-CT images. A total tumor volume of 10.3 cm3 could be calculated based on correlating micro-CT tomograms with HE-stained sections. This correlative approach may be of particular interest for oncological therapy. More than that, micro-CT imaging technology supported histopathology by means of 3D orientation and selection of slices to be cut on determining tumor margins. In this clinical case report, micro-CT imaging did not provide unambiguous clinical evidence for oncological decision-making, but it showed potential to support histopathology and calculate tumor volume for further clinical use.

Preoperative calming effect of melatonin and its influence on propofol dose for anesthesia induction in healthy dogs.

OBJECTIVE: To investigate the preoperative calming effect of melatonin and its influence on propofol dose for anesthesia induction in dogs. STUDY DESIGN: Prospective, randomized, blinded, placebo-controlled clinical study. ANIMALS: A total of 50 healthy, adult, client-owned dogs scheduled for elective surgery. METHODS: Dogs were equally divided into treatment group M, which received 5 mg kg-1 melatonin, and placebo-control group P (sucrose), both administered orally 2 hours prior to induction of anesthesia. Dogs were subjectively characterized and further designated as skeptical (group S; n = 18) or trustful (group T; n = 32). Behavior, calming effect and vital parameters (pulse rate, respiratory rate, blood pressure, rectal temperature) were evaluated before and after treatment. Propofol dose [mg kg-1 intravenously (IV)] to allow endotracheal intubation and anesthesia induction quality was documented. Data were analyzed using a general linear model and Mann-Whitney U tests. RESULTS: Dogs in group MS (n = 10) were calmer than those in group PS (n = 8) at 90 minutes after drug administration (p = 0.047). Group MT (n = 15) required less propofol (5.98 ± 0.96 mg kg-1) than group PT (n = 17; 7.04 ± 1.82 mg kg-1 IV; p = 0.048) and group MS (9.48 ± 3.22 mg kg-1 IV; p = 0.007). Group PS required 7.69 ± 2.71 mg kg-1 IV. Skeptical dogs showed more reactions during induction (p = 0.013). Vital parameters were within physiological ranges before and after treatment. CONCLUSION AND CLINICAL RELEVANCE: Results showed that melatonin may be used to reduce propofol dose for anesthesia induction in trustful dogs. Skeptical dogs benefitted from the calming properties. Potentially, melatonin could be used to minimize the level of excitement before general anesthesia and to reduce the required propofol dose for induction.

Canine oral primary melanoma cells exhibit shift to mesenchymal phenotype and phagocytic behaviour.

Canine oral malignant melanoma (COMM) is a potentially lethal cancer disease. We established primary cell lines from mostly amelanotic primary COMM and metastases and assessed lesions and derived cells for Melan A, PNL2 and CD146 expression. Then, migration and invasion of CD146-enriched vs -depleted COMM cells were analysed. Epithelial-to-mesenchymal transition (EMT) was addressed by Vimentin-staining and MMP2/MMP9 zymography. Phagocytic behaviour was analysed by histopathological examination and phagocytosis assay. While Melan A- and PNL2-staining yielded inconsistent data, 100% of COMM sections and primary cells showed CD146 expression, suggesting that this protein may serve as a prognostic marker. An overall correlation between CD146-expression and migration/invasion was not observed. All primary cell lines consistently expressed Vimentin and secreted biologically active MMP2, indicating that they had undergone EMT. Importantly, COMM sections exhibited cell-in-cell structures, and all primary cell lines exhibited phagocytic activity, supporting the concept that cell cannibalism may have a role in COMM progression.