Drastic alterations in the loop structure around colchicine upon complex formation with an engineered lipocalin indicate a conformational selection mechanism.

Using Anticalin technology, a lipocalin protein dubbed Colchicalin, with the ability to bind the toxic plant alkaloid colchicine with picomolar affinity, has previously been engineered, thus offering a potential antidote in vivo and also allowing its sensitive detection in biological samples. To further analyze the mode of ligand recognition, the crystal structure of Colchicalin is now reported in its unliganded form and is compared with the colchicine complex. A superposition of the protein structures revealed major rearrangements in the four structurally variable loops of the engineered lipocalin. Notably, the binding pocket in the unbound protein is largely occupied by the inward-bent loop #3, in particular Ile97, as well as by the phenylalanine side chain at position 71 in loop #2. Upon binding of colchicine, a dramatic shift of loop #3 by up to 11.1 Šoccurs, in combination with a side-chain flip of Phe71, thus liberating the necessary space within the ligand pocket. Interestingly, the proline residue at the neighboring position 72, which arose during the combinatorial engineering of Colchicalin, remained in a cis configuration in both structures. These findings provide a striking example of a conformational adaptation mechanism, which is a long-known phenomenon for antibodies in immunochemistry, during the recognition of a small ligand by an engineered lipocalin, thus illustrating the general similarity between the mode of antigen/ligand binding by immunoglobulins and lipocalins.

Structural and Functional Analysis of a Highly Active Designed Phosphotriesterase for the Detoxification of Organophosphate Nerve Agents Reveals an Unpredicted Conformation of the Active Site Loop.

Neurotoxic organophosphorus compounds (OPs) pose a severe threat if misused in military conflicts or by terrorists. Administration of a hydrolytic enzyme that can decompose the circulating nerve agent into non-toxic metabolites in vivo offers a potential treatment. A promising candidate is the homo-dimeric phosphotriesterase originating from the bacterium Brevundimonas diminuta (BdPTE), which has been subject to several rational and combinatorial protein design studies. A series of engineered versions with much improved catalytic efficiencies toward medically relevant nerve agents was described, carrying up to 22 mutations per enzyme subunit. To provide a basis for further rational design, we have determined the crystal structure of the highly active variant 10-2-C3(C59V/C227V)─stabilized against oxidation by substitution of two unpaired Cys residues─in complex with a substrate analogue at 1.5 Å resolution. Unexpectedly, the long loop segment (residues 253-276) that covers the active site shows a totally new conformation, with drastic structural deviations up to 19 Å, which was neither predicted in any of the preceding protein design studies nor seen in previous crystallographic analyses of less far evolved enzyme versions. Inspired by this structural insight, additional amino acid exchanges were introduced and their effects on protein stability as well as on the catalytic efficiency toward several neurotoxic OPs were investigated. Somewhat surprisingly, our results suggest that the presently available engineered version of BdPTE, in spite of its design on the basis of partly false structural assumptions, constitutes a fairly optimized enzyme for the detoxification of relevant OP nerve agents.

Structural basis of Alzheimer ß-amyloid peptide recognition by engineered lipocalin proteins with aggregation-blocking activity.

We describe the structural analysis of two Anticalin® proteins that tightly bind Aß40, a peptide involved in the pathophysiology of Alzheimer's disease. These anticalins, US7 and H1GA, were engineered on the basis of the human lipocalin 2, thus yielding compact single-domain binding proteins as an alternative to antibodies. Albeit selected under different conditions and mutually deviating in 13 amino acid positions within the binding pocket (of 17 mutated residues in total), both crystallised anticalins recognize the same epitope in the middle of the ß-amyloid peptide. In the two complexes with the Aß40 peptide, its central part comprising residues LysP16 to LysP28 shows well defined electron density whereas the flanking regions appear structurally disordered. The compact zigzag-bend conformation which is seen in both structures may indicate a role during conversion of the soluble monomeric form into pathogenic Aß state(s) and, thus, explain the aggregation-inhibiting effect of the anticalins. In contrast to solanezumab, which targets the same Aß region in a different conformation, the anticalin H1GA does not show cross-reactivity with sequence-related human plasma proteins. Consequently, anticalins offer promising reagents to prevent oligomerization of Aß peptides to neurotoxic species in vivo and their small size may enable new routes for brain delivery.

The extracellular region of bovine milk butyrophilin exhibits closer structural similarity to human myelin oligodendrocyte glycoprotein than to immunological BTN family receptors.

Bovine butyrophilin (BTN1A1) is an abundant type I transmembrane glycoprotein exposed on the surface of milk fat globules. We have solved the crystal structure of its extracellular region via multiple wavelength anomalous dispersion after incorporation of selenomethionine into the bacterially produced protein. The butyrophilin ectodomain exhibits two subdomains with immunoglobulin fold, each comprising a ß-sandwich with a central disulfide bridge as well as one N-linked glycosylation. The fifth Cys residue at position 193 is unpaired and prone to forming disulfide crosslinks. The apparent lack of a ligand-binding site or receptor activity suggests a function predominantly as hydrophilic coat protein to prevent coagulation of the milk fat droplets. While there is less structural resemblance to members of the human butyrophilin family such as BTN3A, which play a role as immune receptors, the N-terminal bovine butyrophilin subdomain shows surprising similarity to the human myelin oligodendrocyte glycoprotein, a protein exposed on the surface of myelin sheaths. Thus, our study lends structural support to earlier hypotheses of a correlation between the consumption of cow milk and prevalence of neurological autoimmune diseases and may offer guidance for the breeding of cattle strains that express modified butyrophilin showing less immunological cross-reactivity.

Effective rational humanization of a PASylated anti-galectin-3 Fab for the sensitive PET imaging of thyroid cancer in vivo.

The lack of a non-invasive test for malignant thyroid nodules makes the diagnosis of thyroid cancer (TC) challenging. Human galectin-3 (hGal3) has emerged as a promising target for medical TC imaging and diagnosis because of its exclusive overexpression in malignant thyroid tissues. We previously developed a human-chimeric αhGal3 Fab fragment derived from the rat monoclonal antibody (mAb) M3/38 with optimized clearance characteristics using PASylation technology. Here, we describe the elucidation of the hGal3 epitope recognized by mAb M3/38, X-ray crystallographic analysis of its complex with the chimeric Fab and, based on the three-dimensional structure, the rational humanization of the Fab by CDR grafting. Four CDR-grafted versions were designed using structurally most closely related fully human immunoglobulin VH/VL regions of which one-employing the acceptor framework regions of the HIV-1 neutralizing human antibody m66-showed the highest antigen affinity. By introducing two additional back-mutations to the rodent donor sequence, an affinity toward hGal3 indistinguishable from the chimeric Fab was achieved (KD = 0.34 ± 0.02 nM in SPR). The PASylated humanized Fab was site-specifically labelled with the fluorescent dye Cy7 and applied for the immuno-histochemical staining of human tissue sections representative for different TCs. The same protein was conjugated with the metal chelator Dfo, followed by radiolabelling with 89Zr(IV). The resulting protein tracer allowed the highly sensitive and specific PET/CT imaging of orthotopic tumors in mice, which was confirmed by quantitative analysis of radiotracer accumulation. Thus, the PASylated humanized αhGal3 Fab offers clinical potential for the diagnostic imaging of TC.

The Role of Changing Loop Conformations in Streptavidin Versions Engineered for High-affinity Binding of the Strep-tag II Peptide.

The affinity system based on the artificial peptide ligand Strep-tag® II and engineered tetrameric streptavidin, known as Strep-Tactin®, offers attractive applications for the study of recombinant proteins, from detection and purification to functional immobilization. To further improve binding of the Strep-tag II to streptavidin we have subjected two protruding loops that shape its ligand pocket for the peptide - instead of D-biotin recognized by the natural protein - to iterative random mutagenesis. Sequence analyses of hits from functional screening assays revealed several unexpected structural motifs, such as a disulfide bridge at the base of one loop, replacement of the crucial residue Trp120 by Gly and a two-residue deletion in the second loop. The mutant m1-9 (dubbed Strep-Tactin XT) showed strongly enhanced affinity towards the Strep-tag II, which was further boosted in case of the bivalent Twin-Strep-tag®. Four representative streptavidin mutants were crystallized in complex with the Strep-tag II peptide and their X-ray structures were solved at high resolutions. In addition, the crystal structure of the complex between Strep-Tactin XT and the Twin-Strep-tag was elucidated, indicating a bivalent mode of binding and explaining the experimentally observed avidity effect. Our study illustrates the structural plasticity of streptavidin as a scaffold for ligand binding and reveals interaction modes that would have been difficult to predict. As result, Strep-Tactin XT offers a convenient reagent for the kinetically stable immobilization of recombinant proteins fused with the Twin-Strep-tag. The possibility of reversibly dissociating such complexes simply with D-biotin as a competing ligand enables functional studies in protein science as well as cell biology.

A Tetrahedral Boronic Acid Diester Formed by an Unnatural Amino Acid in the Ligand Pocket of an Engineered Lipocalin.

Boronic acids have long been known to form cyclic diesters with cis-diol compounds, including many carbohydrates. This phenomenon was previously exploited to create an artificial lectin by incorporating p-borono-l-phenylalanine (Bpa) into the ligand pocket of an engineered lipocalin, resulting in a so-called Borocalin. Here we describe the X-ray analysis of its covalent complex with 4-nitrocatechol as a high-affinity model ligand. As expected, the crystal structure reveals the formation of a cyclic diester between the biosynthetic boronate side chain and the two ortho-hydroxy substituents of the benzene ring. Interestingly, the boron also has a hydroxide ion associated, despite an only moderately basic pH 8.5 in the crystallization buffer. The complex is stabilized by a polar contact to the side chain of Asn134 within the ligand pocket, thus validating the functional design of the Borocalin as an artificial sugar-binding protein. Our structural analysis demonstrates how a boronate can form a thermodynamically stable diester with a vicinal diol in a tetrahedral configuration in aqueous solution near physiological pH. Moreover, our data provide a basis for the further engineering of the Borocalin with the goal of specific recognition of biologically relevant glycans.

An engineered lipocalin that tightly complexes the plant poison colchicine for use as antidote and in bioanalytical applications.

Colchicine is a toxic alkaloid prevalent in autumn crocus (Colchicum autumnale) that binds to tubulin and inhibits polymerization of microtubules. Using combinatorial and rational protein design, we have developed an artificial binding protein based on the human lipocalin 2 that binds colchicine with a dissociation constant of 120 pm, i.e. 10000-fold stronger than tubulin. Crystallographic analysis of the engineered lipocalin, dubbed Colchicalin, revealed major structural changes in the flexible loop region that forms the ligand pocket at the open end of the eight-stranded ß-barrel, resulting in a lid-like structure over the deeply buried colchicine. A cis-peptide bond between residues Phe71 and Pro72 in loop #2 constitutes a peculiar feature and allows intimate contact with the tricyclic ligand. Using directed evolution, we achieved an extraordinary dissociation half-life of more than 9 h for the Colchicalin-colchicine complex. Together with the chemical robustness of colchicine and availability of activated derivatives, this also opens applications as a general-purpose affinity reagent, including facile quantification of colchicine in biological samples. Given that engineered lipocalins, also known as Anticalin® proteins, represent a class of clinically validated biopharmaceuticals, Colchicalin may offer a therapeutic antidote to scavenge colchicine and reverse its poisoning effect in situations of acute intoxication.

Reprogramming Human Siderocalin To Neutralize Petrobactin, the Essential Iron Scavenger of Anthrax Bacillus.

Bacillus anthracis owes its pronounced virulence-apart from specific toxins-to a twofold import mechanism for FeIII ions. This pathogenic bacterium secretes the siderophores bacillibactin (BB) and petrobactin (PB), of which only BB is neutralized by human siderocalin, an abundant lipocalin in plasma. We describe its reshaping via combinatorial protein design to bind PB⋅FeIII instead of BB⋅FeIII , and with even higher affinity (KD ≈20 pm). X-ray crystallographic analysis of the resulting "petrocalin" in complex with PB⋅GaIII reveals a positively charged ligand pocket while the extended butterfly-like conformation of the bound PB provides a rationale for the missing recognition by the natural siderocalin. In microbiological studies, a combination of petrocalin and siderocalin effectively suppressed the growth of a BB+ /PB+ strain of Bacillus cereus under iron-limiting culture conditions. Thus, our reprogrammed lipocalin may offer novel treatment options for devastating infections caused by B. anthracis.

Rational Design of an Anticalin-Type Sugar-Binding Protein Using a Genetically Encoded Boronate Side Chain.

The molecular recognition of carbohydrates plays a fundamental role in many biological processes. However, the development of carbohydrate-binding reagents for biomedical research and use poses a challenge due to the generally poor affinity of proteins toward sugars in aqueous solution. Here, we describe the effective molecular recognition of pyranose monosaccharides (in particular, galactose and mannose) by a rationally designed protein receptor based on the human lipocalin scaffold (Anticalin). Complexation relies on reversible covalent cis-diol boronate diester formation with a genetically encoded l-boronophenylalanine (Bpa) residue which was incorporated as a non-natural amino acid at a sterically permissive position in the ligand pocket of the Anticalin, as confirmed by X-ray crystallography. Compared with the metal-ion and/or avidity-dependent oligovalent lectins that prevail in nature, our approach offers a novel and promising route to generate tight sugar-binding reagents both as research reagents and for biomedical applications.

Tight Molecular Recognition of Benzo[a]pyrene by a High-Affinity Antibody.

Benzo[a]pyrene, which is produced during the incomplete combustion of organic material, is an abundant noxious pollutant because of its carcinogenic metabolic degradation products. The high-affinity (KD ≈3 nm) monoclonal antibody 22F12 allows facile bioanalytical quantification of benzo[a]pyrene even in complex matrices. We report the functional and X-ray crystallographic analysis of 22F12 in complex with 3-hydroxybenzo[a]pyrene after cloning of the V-genes and production as a recombinant Fab fragment. The polycyclic aromatic hydrocarbon is bound in a deep pocket between the light and heavy chains, surrounded mainly by aromatic and aliphatic amino acid side chains. Interestingly, the hapten-antibody interface is less densely packed than expected and reveals polar, H-bond-like interactions with the polycyclic aromatic π-electron system, which may allow the antibody to maintain a large, predominantly hydrophobic binding site in an aqueous environment while providing sufficient complementarity to its ligand.

Crystal structure of the human odorant binding protein, OBPIIa.

Human odorant-binding protein, OBPIIa , is expressed by nasal epithelia to facilitate transport of hydrophobic odorant molecules across the aqueous mucus. Here, we report its crystallographic analysis at 2.6 Å resolution. OBPIIa is a monomeric protein that exhibits the classical lipocalin fold with a conserved eight-stranded ß-barrel harboring a remarkably large hydrophobic pocket. Basic residues within the four loops that shape the entrance to this ligand-binding site evoke a positive electrostatic potential. Human OBPIIa shows distinct features compared with other mammalian OBPs, including a potentially reactive Cys side chain within its pocket similar to human tear lipocalin.

Deactivation of the E. coli pH stress sensor CadC by cadaverine.

At acidic pH and in the presence of lysine, the pH sensor CadC activates transcription of the cadBA operon encoding the lysine/cadaverine antiporter CadB and the lysine decarboxylase CadA. In effect, these proteins contribute to acid stress adaptation in Escherichia coli. cadBA expression is feedback inhibited by cadaverine, and a cadaverine binding site is predicted within the central cavity of the periplasmic domain of CadC on the basis of its crystallographic analysis. Our present study demonstrates that this site only partially accounts for the cadaverine response in vivo. Instead, evidence for a second, pivotal binding site was collected, which overlaps with the pH-responsive patch of amino acids located at the dimer interface of the periplasmic domain. The temporal response of the E. coli Cad module upon acid shock was measured and modeled for two CadC variants with mutated cadaverine binding sites. These studies supported a cascade-like binding and deactivation model for the CadC dimer: binding of cadaverine within the pair of central cavities triggers a conformational transition that exposes two further binding sites at the dimer interface, and the occupation of those stabilizes the inactive conformation. Altogether, these data represent a striking example for the deactivation of a pH sensor.

Crystal structure of the sensory domain of Escherichia coli CadC, a member of the ToxR-like protein family.

The membrane-integral transcriptional activator CadC comprises sensory and transcriptional regulatory functions within one polypeptide chain. Its C-terminal periplasmic domain, CadC(pd), is responsible for sensing of environmental pH as well as for binding of the feedback inhibitor cadaverine. Here we describe the crystal structure of CadC(pd) (residues 188-512) solved at a resolution of 1.8 Å via multiple wavelength anomalous dispersion (MAD) using a ReCl(6)(2-) derivative. CadC(pd) reveals a novel fold comprising two subdomains: an N-terminal subdomain dominated by a ß-sheet in contact with three α-helices and a C-terminal subdomain formed by an eleven-membered α-helical bundle, which is oriented almost perpendicular to the helices in the first subdomain. Further to the native protein, crystal structures were also solved for its variants D471N and D471E, which show functionally different behavior in pH sensing. Interestingly, in the heavy metal derivative of CadC(pd) used for MAD phasing a ReCl(6)(2-) ion was found in a cavity located between the two subdomains. Amino acid side chains that coordinate this complex ion are conserved in CadC homologues from various bacterial species, suggesting a function of the cavity in the binding of cadaverine, which was supported by docking studies. Notably, CadC(pd) forms a homo-dimer in solution, which can be explained by an extended, albeit rather polar interface between two symmetry-related monomers in the crystal structure. The occurrence of several acidic residues in this region suggests protonation-dependent changes in the mode of dimerization, which could eventually trigger transcriptional activation by CadC in the bacterial cytoplasm.

New insights into the signaling mechanism of the pH-responsive, membrane-integrated transcriptional activator CadC of Escherichia coli.

The membrane-integrated transcriptional regulator CadC of Escherichia coli activates expression of the cadBA operon at low external pH with concomitantly available lysine, providing adaptation to mild acidic stress. CadC is a representative of the ToxR-like proteins that combine sensory, signal transduction, and DNA-binding activities within a single polypeptide. Although several ToxR-like regulators such as CadC, as well as the main regulator of Vibrio cholerae virulence, ToxR itself, which activate gene expression at acidic pH, have been intensively investigated, their molecular activation mechanism is still unclear. In this study, a structure-guided mutational analysis was performed to elucidate the mechanism by which CadC detects acidification of the external milieu. Thus, a cluster of negatively charged amino acids (Asp-198, Asp-200, Glu-461, Glu-468, and Asp-471) was found to be crucial for pH detection. These amino acids form a negatively charged patch on the surface of the periplasmic domain of CadC that stretches across its two subdomains. The results of different combinations of amino acid replacements within this patch indicated that the N-terminal subdomain integrates and transduces the signals coming from both subdomains to the transmembrane domain. Alterations in the phospholipid composition did not influence pH-dependent cadBA expression, and therefore, interplay of the acidic surface patch with the negatively charged headgroups is unlikely. Models are discussed according to which protonation of these acidic amino acid side chains reduces repulsive forces between the two subdomains and/or between two monomers within a CadC dimer and thereby enables receptor activation upon lowering of the environmental pH.

High-affinity recognition of lanthanide(III) chelate complexes by a reprogrammed human lipocalin 2.

Human lipocalin 2 (Lcn2), also known as neutrophil gelatinase-associated lipocalin (NGAL), which naturally scavenges bacterial ferric siderophores, has been engineered to specifically bind rare-earth and related metal ions as chelate complexes with [(R)-2-amino-3-(4-aminophenyl)propyl]-trans-(S,S)-cyclohexane-1,2-diaminepentaacetic acid (p-NH(2)-Bn-CHX-A''-DTPA). To this end, 12 amino acid residues in the ligand pocket of Lcn2, which is formed by four loops at the open end of an eight-stranded beta-barrel, were subjected to targeted random mutagenesis, and from the resulting library, variants with binding activity for the Me x DTPA group were selected using the method of bacterial phage display. One promising candidate was further developed in several cycles of in vitro affinity maturation using partial random mutagenesis and selection (via phage display and/or Escherichia coli colony screening) under conditions of increasing stringency. As result, an Lcn2 variant was obtained that binds Y x DTPA with a dissociation constant as low as 400 pM. The Lcn2 variant specifically recognizes the artificial ligand, as exemplified in (competitive) ELISA and real-time surface plasmon resonance analyses. DTPA-complexed Y(3+), Tb(3+), Gd(3+), and Lu(3+) are most tightly bound, comprising metal ions whose isotopes are in common use for radiotherapy and imaging. All of the Lcn2 variants are stably folded and can be functionally produced in high yield in E. coli. X-ray crystallographic analyses show that the new ligand is well-accommodated in the central cavity of the engineered lipocalin, whose fold is largely preserved, but that the mode of binding differs from the one seen with the natural ligand Fe x enterobactin. This structural study reveals analogies but also differences with respect to previously described antibody-metal chelate complexes. Notably, the functionalized side chain of DTPA protrudes from the ligand pocket of the lipocalin in such a way that its conjugates (with other haptens, for example) are recognized too. With their small sizes and robust fold based on a single polypeptide chain, the engineered Lcn2 variants provide novel modules and/or fusion partners for radionuclide-chelate capturing strategies that bear promise for medical diagnostics and therapy.

Structural insight into the dual ligand specificity and mode of high density lipoprotein association of apolipoprotein D.

Human apolipoprotein D (ApoD) occurs in plasma associated with high density lipoprotein. Apart from the involvement in lipid metabolism, its binding activity for progesterone and arachidonic acid plays a role in cancer development and neurological diseases. The crystal structures of free ApoD and its complex with progesterone were determined at 1.8A resolution and reveal a lipocalin fold. The narrow, mainly uncharged pocket within the typical beta-barrel accommodates progesterone with its acetyl side chain oriented toward the bottom. The cavity adopts essentially the same shape in the absence of progesterone and allows complexation of arachidonic acid as another cognate ligand. Three of the four extended loops at the open end of the beta-barrel expose hydrophobic side chains, which is an unusual feature for lipocalins and probably effects association with the high density lipoprotein particle by mediating insertion into the lipid phase. This mechanism is in line with an unpaired Cys residue in the same surface region that can form a disulfide cross-link with apolipoprotein A-II.

Solubility engineering and crystallization of human apolipoprotein D.

Human apolipoprotein D (ApoD) is a physiologically important member of the lipocalin protein family that was discovered as a peripheral subunit of the high-density lipoprotein (HDL) but is also abundant in other body fluids and organs, including neuronal tissue. Although it has been possible to produce functional ApoD in the periplasm of Escherichia coli and to demonstrate its ligand-binding activity for progesterone and arachidonic acid, the recombinant protein suffers from a pronounced tendency to aggregate and to adsorb to vessel surfaces as well as chromatography matrices, thus hampering further structural investigation. Here, we describe a systematic mutagenesis study directed at presumably exposed hydrophobic side chains of the unglycosylated recombinant protein. As a result, one ApoD mutant with just three new amino acid substitutions--W99H, I118S, and L120S--was identified, which exhibits the following features: (1) improved yield upon periplasmic biosynthesis in E. coli, (2) elution as a monomeric protein from a gel permeation chromatography column, and (3) unchanged binding activity for its physiological ligands. In addition, the engineered ApoD was successfully crystallized (space group I4 with unit cell parameters a = 75.1 A, b = 75.1 A, c = 166.0 A, alpha = beta = gamma = 90 degrees), thus demonstrating its conformationally homogeneous behavior and providing a basis for the future X-ray structural analysis of this functionally still puzzling protein.

Characterization of the anti-apoptotic mechanism of Bcl-B.

Bcl-B protein is an anti-apoptotic member of the Bcl-2 family protein that contains all the four BH (Bcl-2 homology) domains (BH1, BH2, BH3 and BH4) and a predicted C-terminal transmembrane domain. Our previous results showed that Bcl-B binds Bax and suppresses apoptosis induced by over-expression of Bax; however, Bcl-B does not bind or suppress Bak. To explore the molecular basis for the differential binding and suppression of Bax and Bak, we studied the BH3 dimerization domains of Bax and Bak. Chimeric mutants of Bax and Bak were generated that swapped the BH3 domains of these pro-apoptotic proteins. Bcl-B associated with and blocked apoptosis induced by mutant Bak containing the BH3 domain of Bax, but not mutant Bax containing the BH3 domain of Bak. In contrast, Bcl-X(L) protein bound and suppressed apoptosis induction by Bax, Bak and both BH3-domain chimeras. A strong correlation between binding and apoptosis suppression was also obtained using a series of alanine substitutions spanning the length of the Bax BH3 domain to identify critical residues for Bcl-B binding. Conversely, using structure-based modelling to design mutations in the BH3-binding pocket of Bcl-B, we produced two Bcl-B mutants (Leu86-->Ala and Arg96-->Gln) that failed to bind Bax and that also were unable to suppress apoptosis induced by Bax over-expression. In contrast, other Bcl-B mutants that still bound Bax retained protective activity against Bax-induced cell death, thus serving as a control. We conclude that, in contrast with some other anti-apoptotic Bcl-2-family proteins, a strong correlation exists for Bcl-B between binding to pro-apoptotic multidomain Bcl-2 family proteins and functional apoptosis suppression.

The hemopexin-like C-terminal domain of membrane type 1 matrix metalloproteinase regulates proteolysis of a multifunctional protein, gC1qR.

Matrix metalloproteinases (MMPs) including membrane type 1 MMP (MT1-MMP) can degrade extracellular matrix and cell surface receptor molecules and have an essential function in malignancy. Recently, we established a functional link between MT1-MMP and the receptor of complement component 1q (gC1qR). The gC1qR is known as a compartment-specific regulator of diverse cellular and viral proteins. Once released by proliferating cells, soluble gC1qR may inhibit complement component 1q hemolytic activity and play important roles in vivo in assisting tumor cells to evade destruction by complement. Here, we report that gC1qR is susceptible to MT1-MMP proteolysis in vitro and in cell cultures. The major MT1-MMP cleavage site (Gly(79) down arrow Gln(80)) is localized within the structurally disordered loop connecting the beta(3) and the beta(4) strands of gC1qR. The recombinant MT1-MMP construct that included the catalytic domain but lacked the hemopexin-like domain lost the proteolytic capacity; however, it retained the ability to bind gC1qR. Inhibition of MT1-MMP activity by a hydroxamate inhibitor converted the protease into a cell surface receptor of gC1qR and promoted co-precipitation MT1-MMP with the soluble gC1qR protein. It is tempting to hypothesize that these novel mechanisms may play important roles in vivo and have to be taken into account in designing hydroxamate-based cancer therapy.